Civil Work

Amount

Providing and 'fixing 'Acoustic' Wall Panelling (equivalent to Armstrong) in channelled wood works perforated panels of width 192mm, thickness of 15mm and length of 2400mm or as per required by the Departmental Engineer made of a high density fibre board with minimum 725 kg./m3 density substrate with a laminated facing as per the approved shada and finish and a melamine balancing layer on the reverse side. The boards shall have a special peforation pattern where the visible surface hae a ”Helmholtz" fluted perforation of 3mm width and 21mm of visible panal each. The edges of the panels shall be "tongue- and-grooved” to receive special clips f'or installation. The back of the perforated panel shall have sound absorbing non woven acoustical fleese having NRC of 0.52. The panels shall be mounted on special aluminium .splices using clips provided by Armstrong and approved by the Engineer-in-Charge

Installation: Install aluminium box section (provided by others) of section 50mm x 25mm or as approved by the Engineer-in-Charge on the solid wall horizontally using screws and plugs at spacing of 600mm centre to centre. Screw the aluminium extruded keel for channelled wood works provided by Armstrong over the lowest and eecond aluminium section at an on centre distance of 600mm. Place the inside clip on the groove end of' the panel along the aluminium keel and then place the tongue end of the next panel. Continue installing rows of panels by inserting the tongue into groove of the earlier inserted panel and progressively installing inside clips into the next keel till the actual height is achieved.Finish off the edges using wooden moulding of matching colour (provided by others). Installation to be carried out by Armstrong Trained Installation Team and installation should be carried out as per Armstrong Recommended Procedure and as directed by the departmental officers.

Supply and Installation of Anutone Sisoli Serene H plus Mineral fibre ceiling tiles of size 595x595x15mm having volume density 360 kgs/ m3, weight 5.6kg/m2 which is suspended by using 0.3mm thick Anutone Skelet TrelisT15 metal grid system. Anutone Skelet TrelisT15 metal grid system of 600x600mm module includes Anutone Skelet WA15W30 wall angle with unequal flanges of 15/19mm, length 3000mm, fixed along the perimeter of walls with the help of nylon sleeves and suitable fasteners at 300mm centers. Then suspend the Anutone Skelet MT15W36 MainT with flange width 15mm, height 32mm and length 3600mm, from the soffit slab with help of soffit cleat and wire rod with leveling spring clip at 1200mm centres. Anutone Skelet CT15W12 CrossT with flange width 15mm, height 26mm and length 1200mm is interlocked into the pre-cut slots in the Main T15 at 600mm centers in the perpendicular direction to the Main T15. Finally Anutone Skelet CT15W06 CrossT with flange width 15mm, height 26mm and length 600mm are interlocked into the precut slots in the CT15W12 CrossT in direction parallel to the Main T15 to result in 600x600mm module. Anutone Sisoli Serene H Plus of size 595x595x15mm shall be placed into the grid size of 600x600mm.Technical Parameters Fire (Class)– 1 & P, Acoustics – NRC 0.5 (For E600 Mounting), Climate (°C, RH) – 45,99, Light (%) – 85, Green (VoC, RC%) –Low, 63 etc., complete and as directed by the departmental officers.

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts,other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I.channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall crews @ 230 mm interval, including fixing of gypsum board etc., complete and as directed by the departmental officers.

Supplying and fixing of roller blinds of approved quality and colour inclusive of all accessories as per site condition and cost of all materials and labour charges and as directed by the departmental officers. (The Quality and shade of vertical blinds should be got approved from the EE before use on work.)

Supply and fixing of Grandeur 8ft main table + 4ft ERU Grandeur 8FT Main Table Grandeur 4FT ERU Size-3000 x 1050 x 740 MAIN WORKTOP : Made of 43mm Thick (±1) combination of MDF and particle board with top veneer face coated with clear lacquer. All edges are edge banded with matching 1mm thick veneer lipping. LEATHER PAD: Made of 18mm Thick (±1) MDF with Leatherette wrapped around top surface. This leather pad is fixed to main top panel. DRAWER UNIT:-Top panel and drawer unit modesty panel is made of 43mm Thick (±1) combination of MDF and particle board with top veneer face coated with clear lacquer. All thickness edges are edge banded with matching lipping. Remaining construction is of 18mm Pre-laminated twin board (PLT) of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Bottom panel of drawer is 9mm thick particle board with leatherette on top surface.

Drawer unit is provided with soft closing channels for smooth opening and closing. Drawer unit is secured with side central lock. OPEN STORAGE UNIT : Top panel and open storage unit modesty panel is made of 43mm Thick (±1) combination of MDF and particle board with top veneer face coated with clear lacquer. All thickness edges are edge banded with matching lipping. Remaining construction is of 18mm Pre-laminated twin board (PLT) of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. MODESTY: Made of 18mm Thick Pre-laminated twin board (PLT) of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Modesty is fitted with aluminum trims. UNDERSTRUCTURE: Made of 18mm Thick Pre-laminated twin board (PLT) of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Door is fixed with soft closing hinges and handle is provided for ease of opening. Also lock is provided on side panel for security.

ACCESS FLAP WITH POWER BOX: Soft closing access flap with power box contains 3 Universal Sockets, 2 USB power points, 1 HDMI connection, 1 inbuilt misc. cable grommet and CAT 3 and CAT 6 connections. HIDDEN WIRELESS MOBILE CHARGER: It will only be available in 3000mm main table. It is fitted below leather pad. Grandeur 1200W ERU- TOP PANEL: coated with clear lacquer. All edges are edge banded with matching 1mm thick veneer lipping. UNDERSTRUCTURE: Made of 18mm Thick Pre-laminated twin board (PLT) of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. DOOR PANELS:Made of 18mm Thick Pre-laminated twin board (PLT) of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Door is fixed with soft closing hinges and handle is provided for ease of opening. It is secured with side central lock. Grandeur 1200W ERU- Size-1200 x 600 x 610

TOP PANEL: Made of 43mm Thick (±1) combination of MDF and particle board with top veneer face coated with clear lacquer. All edges are edge banded with matching 1mm thick veneer lipping. SLIDING SHUTTER: Made of 12mm Thick (±1) MDF with 3.5mm veneer both side and face coated with clear lacquer. All thickness edges are edge banded with matching lipping. Door is provided with soft closing & anti slam mechanism. Handle is also provided for ease of opening. Storage is secured with lock. UNDERSTRUCTURE: Made of 18mm Thick Pre-laminated twin board (PLT) of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping.

DRAWERS: Made of 18mm Thick Pre-laminated twin board (PLT) of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Bottom panel of drawer is 9mm thick particle board with leatherette on top surface. Drawers have soft closing channels for smooth opening and closing. Grandeur Height Adujustable ERU- ERU TOP PANEL: Made of 43mm Thick (±1) combination of MDF and particle board with top veneer face coated with clear lacquer. All edges are edge banded with matching 1mm thick veneer lipping. Top panel is provided with elliptical cable cover which contains 2 USBs, 1 Universal socket, 1misc. cable grommet, 1 HDMI connector and 1 CAT-6 connector. UNDERSTRUCTURE: Made of 18mm Thick Pre-laminated twin board (PLT) of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping.

Supply and fixing 6 Grandeur Tall Back unit 1950Ht Grandeur 7FT Back Unit Body Grandeur 7FT Back Unit Shutter Internal# CONSTRUCTION AND MATERIAL: Made from combination of Top panel(0.5mm CRCA), side panel(0.5mm CRCA), Bottom panel(0.5mm CRCA for 600W and 0.8mm CRCA for 1200W), Back panel(0.5mm CRCA), Top Bottom stiffener(1.2mm CRCA) and End Cover(0.5mm CRCA). Shelves are 12 bend panel made of 0.7mm Thick CRCA (D Grade, IS-513). 4 nos of shelves for 1950H and 5 nos of shelves for 2325H back unit. Storage body is powder coated with Epoxy Polyester to the thickness of 50 microns (+/-10 micron). VENEER DOOR: Made of 12mm Thick (±1) MDF with 3.5mm veneer both side and face coated with clear lacquer.

All edges are edge banded with matching 1mm thick veneer lipping. Door is provided with soft closing hinge. Handle is also provided for ease of opening. Storage is secured with 3 way cam lock. GLASS DOOR: Made from the combination of aluminium alloy (63400) extrusion and 4mm clear toughened glass. Aluminium extrusion of glass doors are powder coated with Epoxy Polyester to the thickness of 50 microns (+/-10 micron). Handle is provided for ease of opening. RH Glass Door is provided with 3 way cam lock for security. Grandeur 2400WX1200H Back Unit- CONSTRUCTION AND MATERIAL: Made from combination of side panel(0.5mm CRCA), Bottom panel(0.5mm CRCA), Back panel(0.5mm CRCA), Top Bottom stiffener(1.2mm CRCA) and End Cover(0.6mm CRCA). Shelves are 12 bend panel made of 0.7mm Thick CRCA (D Grade, IS-513). Storage body is powder coated with Epoxy Polyester to the thickness of 50 microns (+/-10 micron).

VENEER DOOR:Made of 12mm Thick (±1) MDF with 3.5mm veneer both side and face coated with clear lacquer. All edges are edge banded with matching 1mm thick veneer lipping. Door is provided with soft closing hinge. Handle is also provided for ease of opening. Storage is secured with 3 way cam lock. GLASS DOOR:Made from the combination of aluminium alloy (63400) extrusion and 4mm clear toughened glass. Aluminium extrusion of glass doors are powder coated with Epoxy Polyester to the thickness of 50 microns (+/-10 micron). Handle is provided for ease of opening. RH Glass Door is provided with 3 way cam lock for security.

Pisa 1 Seater Sofa Providing, supplying and placing of one seater sofa SEAT FOAM : The seat is made up of PU foam in Density 28 ±2 kg/cu.mtr with an additional top layer of supersoft PU foam in Density 32 ± 2 kg/cu, upholstered with fabric or leatherette. BACK FOAM : The back is made up of PU foam in Density 28 ± 2 kg/cu. mtr with two additional top layer of supersoft foam of density 32±2 kg/cu. mtr, upholstered with fabric or leatherette. UNDERSTRUCTRE : Understructure is made up of 1.2±0.1 cm. thick hot pressed plywood [moisture resistance & termite proof as per IS:303] & pinewood of cross sections devoid of major knots & surface defects. 6 nos. per seat & 3.8mm Dia zigzag spring assembly is mounted over understructure for cushioning purpose. LEG ASSEMBLY : It is a welded Assembly made in Stainless steel (grade SS 202) tube & plate with plastic endcap.Width (W): 86.0 CM. Depth (D): 90.5 CM. Height (H): 85.5 CM. Seat Height (SH): 45.0 CM.

PISA 3 SEATER SOFA - Providing, supplying and placing of three seater sofa SEAT FOAM : The seat is made up of PU foam in Density 28 ±2 kg/cu.mtr with an additional top layer of supersoft PU foam in Density 32 ± 2 kg/cu, upholstered with fabric or leatherette. BACK FOAM : The back is made up of PU foam in Density 28 ± 2 kg/cu. mtr with two additional top layer of supersoft foam of density 32±2 kg/cu. mtr, upholstered with fabric or leatherette. UNDERSTRUCTRE : Understructure is made up of 1.2±0.1 cm. thick hot pressed plywood [moisture resistance & termite proof as per IS:303] & pinewood of cross sections devoid of major knots & surface defects. 6 nos. per seat & 3.8mm Dia zigzag spring assembly is mounted over understructure for cushioning purpose. LEG ASSEMBLY : It is a welded Assembly made in Stainless steel (grade SS 202) tube & plate with plastic endcap.Width (W): 206.0 CM. Depth (D): 90.5 CM. Height (H): 85.5 CM. Seat Height (SH): 45.0 CM.

Supply and fixing of Grandeur Corner and Center Table Corner Table: 450 X 450mm

Center Table: 800 X 800mm

Supply and fixing of Emerald HB Leather Size: 690W X 778D X 1235 - 1335H mm Seat Height: 495-594mm

Supply and fixing of Lasede Visitor Chair, Pure Leather with Die cast polished Aluminum understructure.

Supply and fixing of Earl Visitor Chair The Seat and Back made up of 1.2 +/- 0.1cm thick hot pressed plywood and upholstered with fabric and moulded ployurethane foam Size: 550W x 580D x840H (mm) Seat Height: 450mm

Supply and fixing of Podium Table - Training Table Size: 3150W x 650D x 750H (mm) Table top shall be 25mm thick particle board

Supply and fixing of Podium Stage second class teak wook - 20ft L X 8ft B X 250Ht

Supply and fixing of MARVEL Mid Back Leatherette, Active Bio-Synchro with 5 Position Tilt Limiter, Die cast polished Aluminum Pedestal, Adj Arms, Bk Ht Adj,Seat Slide Mech

Supply and fixing of - CUBICLES Size :- 2400mm W x 1500mm D Main Frame 52 mm thk, 1200mm ht. Gap from floor - 120mm Top Tile - 1 no. White Board, remaining Fabric Magnetic tiles Intermediate Blocks - Fabric Bottom Tile - Metal Worksurface - 25mm thk. Prelam particle board with PVC. Main table - 1500 x 600mm, Return table - 900 x 450mm Wire management - switch cutouts to be provided on the blocks/bottom tile Understructure - MS powder coated Legs Accessories 3 Dr NOVA metal free standing pedestal, 390 x 435 x 646mm H, Std Locking Metal KBPT Metal CPU Trolley

Supply and fixing of MINGLE MODULAR MEM - 33 SEATER with 1 No. of MINGLE MODULAR MEM 2350W APC - 2350 X 850 X 740, 2 No. of MINGLE MODULAR MEM_2 STR MAIN APC - 1350 X 600 X 740, 10 No. of MINGLE MODULAR MEM_2 STR SHARED APC - 1350 X 600 X 740, 2 No. of MINGLE MODULAR MEM_1 STR SHARED APC - 675 X 600 X 740, 1 No. of MINGLE MODULAR MEM_2 STR END_LH APC - 1350 X 600 X 740, 1 No. of MINGLE MODULAR MEM_2 STR END_RH APC - 1350 X 600 X 740, 3 No. of Kramer AV Cable Cubby with Accessories of 5 No. of Dsk 2 way Name Plate, 5 No. of Dsk Mod Doc Shelf, 5 No. of Dsk HDMI wire Man, (One packet Contain 8 Qty) etc complete complying with standard specification and as directed by the departmental officers at site of work.

Supply and fixing of Beat High Back With Seat Slide, KTS Mech 4 Position Locking, Chrome Pedestal, Chromeplating, Element in PU-up-down adj arms & Ht. Adj Backrest etc., complete.

Supply and fixing of Beat Visitor Chair, MS Powder Coated U/S, Fixed Arm Rest etc., complete

GST at the rate of 18%

Rajam Engineering Contractors

SRK ASSOCIATESS