Vinchur Mini Industrial area AMC

Amount

Sub Estimate No. 1 :- M&R to Vinchur & Yeola Water Supply scheme -- Repairs & maintenance with removing of leakages on RWRM of Vinchur& Yeola industrial area

Repairs & day to day maintenance of rising main 12 Km length ) of Vinchur indl area with all require excavation , replacement of pipe & special, operation of sluice valve in indl area , including watch & ward of MIDC's property such as rising main , including all duties assinged as & when required etc. as a job.

Repairs & day to day maintenance of distribution network of Vinchur indl area with all require excavation , replacement of pipe & special, operation of sluice valve in indl area , including watch & ward of MIDC's property such as ,distribution pipe line @ wine park @ Vinchur including all duties assinged as & when required etc. as a job.

Repairs & day to day maintenance of Pure water Gravity Main PWGM main from Vinchur Indl Area to Yeola Indl , Area 35.20 Km length ) & distribution network in Yeola Indl. Area watch and ward of ESR , office cum godawon , petrolling industrial area & pure water rising main to avoid tampering the pipelines

Providing and laying in situ Cement Concrete M-15 of trap/ granite / quartzite / gneiss metal for foundation and bedding including bailing out water, form work, compaction, curing, etc. complete. (Cement 5.90 bags / cum)

Providing double flange sluice valve confirming for IS- 14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete.iv) 100 mm diameter

vi) 150 mm diameter

viii) 250 mm diameter

Supply of CI Mechanical joint All Socket Tees as dimensionally described in Table -18 of IS - 13382/1992 complete with sealing rubber gasket of S.B.R. (dimensionally described in IS 12820/1989) with cast iron follower gland and mild steel nut bolts coated or otherwise protected from rusting and suitable for C. I. pipes. 3) 100 x 100 x 100 mm

Supply of C. I. Mechanical Compression Flanged / Socket Tailpiece (Popularly known as I TM Flanged / Socket Tailpiece) suitable for making flanged connection with the plain barrel of C. I. Spun Pipes ( as per - IS - 1536 /2001) and D. I. Pipes ( as per IS: 8329 / 2000).The Tailpiec to be supplied complete with sealing rubber gasket of S.B.R, C.I. Follower Glands and M.S. Nut Bolts.The whole assembly should be mechanically and hydraulically tested to the provisions as laid down in IS:1538 /1993. The rates are inclusive of cost of material, freight charges, loading, transportation and unloading at departemental store, excluding GST levied by Gol and GoM in all respect, etc. complete as directed. ii) 100 mm diameter.

iii) 150 mm diameter.

vi) 250 mm diameter

vii) 300 mm dia

Providing double flange sluice valve confirming for IS- 14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc.Sluice valves - PN -1 (Without by pass) iv) 100mm dia

Providing and supplying Air Valves as per IS-14845 and MJP’s standard specifications double orifice type combined with screw downisolating valve,small or ifice elasticball restingonagunmetal orificenipple, large orificevulcaniteballseatingonmouldedseat ring, inlet face and drilled, including insurance, third party inspection charges, loading, unloading, transportation upto departmental stores, excludingGST levied by GOI & GOM in all respect etc. complete. iii) 80 mm

Providing and supplying ISI standard MS specials of required thickness with 3 coats of approved make epoxy paint (Shalimar, Ciba or Mahindra & Mahindra make) from inside and outside excluding all statutory duties & taxes such as GST levied by GOI & GOM in all respect, inspection charges, transportation to stores / site, and stacking, etc. completee) Plain ended specials or plain ended branch flanged specials of all diameters.

Sub Estimate No. 2 :- M&R to Vinchur & Yeola Water Supply scheme -- Repairs to roads in Vinchur & Yeola industrial area

Picking the road surface including sectioning etc. complete (WBM surface.)

Providing earth work in embankment with approved materials obtained from other sources upto lead of 50m. including all lifts, laying in layers of 20cm. to 30cm. thickness breaking clods, dressing to the required lines, curves, grades & section, watering and compaction with vibratory roller with V-Sat attachment to achieve not less than 97 % of standard proctor density etc. complete ( Material obtained from Other sources)

Providing and constructing 75 mm. thick Modified Penetration Macadam (MPM) road surface including all materials, preparing the existing road surface, spreading 40 mm. stone metal layers 100% crusher broken metal with conical crusher plant heating and spraying the bitumen of specified grade @ 2 Kg/sqm, spreading 12 mm.size chips compacting with three wheel static roller having weight 8 to 10 MT. to achive the desired degree of compaction as per Technical Specification Clause 506 etc. complete. Including picking of existing WBM surface. (VG-30 bulk bitumen rates are considered to arrive at rates

Prime coat - Providing and applying primer coat with bitumen emulsion on prepared surface of granular Base including cleaning of road surface and spraying, primer at the rate of 0.60 kg/sqm using mechanical means.

DENSE BITUMINOUS MACADAM: Proving and laying dense bituminous macadam using crushed aggregates of Grading 1, premixed with bituminous binder of specified grade of Bitumen @ 4.50 per cent by weight of total mix and filler, transported to site with VTS , laid over a previously prepared surface, finished to the required grade, level, alignment, and rolling to achieve the desired density for 76-100 mm compacted thickness .USING Batch mix type hot mix plant with SCADA, Sensor Paver, Vibratory roller with Stone Dust filler.(VG-30 bulk bitumen rates are considered to arrive at rates) a) 50 mm thick with heating aggregate

Providing and applying tack coat on the prepared surface heating by fames in Boiler and spraying bitumen with sprayer on Dry / Hungry B.T. surface 3 kg/10 sqm. (VG-30 bulk bitumen rates are considered to arrive at rates) .

BITUMINOUS CONCRETE:--Providing and laying bituminous concrete using crushed aggregate of grading 1, premixed with bituminous binder @5.40% by weight of total mix and filler, transported at site with VTS, laid over a previously prepared surface, finished to the required grade ,level, alignment, and rolling to achieve the desired density for 50mm compacted thickness with drum mix plant with SCADA, Sensor paver and Vibratory roller excluding prime/Tack coat etc. complete Bitumen of specified grade with stone dust filler. (VG-30 bulk bitumen rates are considered to arrive at rates a) 25 mm thick with heating aggregate

Royalty Charges

Providing earth work in embankment with approved materials obtained from other sources upto lead of 50m. including all lifts, laying in layers of 20cm. to 30cm. thickness breaking clods, dressing to the required lines, curves, grades & section, watering and compaction with vibratory roller with V-Sat attachment to achieve not less than 97 % of standard proctor density etc. complete ( Material obtained from Other sources)

K G Dube & Sons (BID ID -6613943)