Zone-02_Construction of Road and Pathway from Shri Anmol Tripathi House to Shri Anand Narayan Singh House in Bajrang Nagar Colony in Ramrepur

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kind of soil .(DSR 2023 SI NO. 2.8.1)

Supply of GSB closed graded for grade-1 including spreading compacting the same GSB specification including spreading in unifrom thicknes, hand packing, rolling with three wheel 80-100 KN static roller in stages to proper grade and camber, applying and bromming stone screening/binding materials to fill up the interestices of coarse aggregate, watering and compactiong to the required density. (All quantity taken in loose)

Providing and Laying prime coat with bitumen emulsion on prepared WBM / existing surface (Approved Rate )

Providing and laying Dense Graded Bituminous Macadam with higher capacity batch type HMP using crushed aggregates of specified grading, premixed with 60/70 (VG-30) bituminous binder @ 4.5 percent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor controll to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tendem rollers to achieve the desired compaction as per MORTH Specification clause No. 505 complete in all respect.

Tack Coat on Bituminous Surface Providing and applying tack coat with bitumen VG-10using bitumen pressure distributor at of 0.30 kg per sqm on the prepared bituminous surface cleaned with mechanical broom.

Providing and laying Bituminous Concrete with higher capacity batch type HMP using crushed aggregates of specified grading, premixed with 60/70 (VG-30) bituminous binder @ 5.4 percent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor controll to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tendem rollers to achieve the desired compaction as per MORTH Specification clause No. 507 complete in all respect.

Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand,compacting and properembedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge. 80 mm thick C.C. paver block of M-35 grade with approved colour design and pattern DSR 2023 SI NO 16.91.2

Providing & Fixing of stainless steel , inauguration stone with letter writing on granite stone with ADM podiam size (.765x.615 ) including supply of all materials labour and T $P etc . Required For proper completion of the work as directed by E/I Analysis