Annual Electrical maintenance to panathur crematorium in ward no.105

Annual Electrical maintenance to panathur crematorium in ward no.105

Supply of Air Freshner cakes

Supply of Room Freshner

Supply of Urinal cakes

Supplying & fixing of Insulation Refractory STANDARD bricks suitable for crematorium furnace having the bulk density of max of 0.60 gm/cm2 and maximum working temperature of 1300 degree c. the size of...

Supplying & fixing of STD IS 8 Alumina Refractory bricks suitable for electrical crematorium furnace having maximum working temperature of 1300 degree centigrade .The size bricks - 75 x 115 x 225mm in...

Supplying & fixing of Refractory Slabs MCL suitable for electrical crematorium furnace having the required mechanical strength and chemical composition as per IS 2042 and IS-1528 max working temperatu...

Supplying & fixing Body Laying With 70% aluminiumMoulded RefractoryBricks MCL suitable for electrical crematorium furnace having the required mechanical strength and chemical composition as per IS-204...

Supplying of refractory cement fine ACC-50 (25 kg/bag) for casting refractory bricks

Supplying of refractory cement FIRECRETE super (25 kg/bag) for casting refractory bricks

Supplying & fixing of Refractory cement white heat K ACC make for casting refractory bricks. 25 kgs bag

Supplying of Acoustic Set Thermotex Liquid Blinder suitable for casting refractory bricks. 40 kgs bucket

Supplying & fixing of FIBER blank kit 96 grade suitable for electrical crematorium furnace heat insulation- 7300 x 610 x 25mm

Supplying & fixing of FIBER blank kit 128 grade suitable for electrical crematorium furnace heat insulation- 7300 x 610 x 25mm

Supplying & fixing of SS stud of size 304 x 250 x 10mm with locking washer for door work

Supplying & fixing of Refractory Slabs IS-8 high aluminium suitable for electrical crematorium furnace having the required mechanical strength and chemical composition as per IS 2042 and IS-1528 mx wo...

Supplying & fixing of 3.5 KW Heating coils made out of 5.8mm thick APM wire heating Zone should be 950mm length End terminal rod SS 304 grade 10mm dia 550mm length suitable for vertical mounting syste...

Providing servicing repairing and overhauling of existing body charging trolley complete.

Servicing & cleaning of Scrubber,Tank,Scrubber duct,Exhaust Blower, Exhaust Duct Furnace to Chimny and cleaning of chimny (6 monts once)

Furnace main door servicing include of bearing replacement 2 no's and door lifting chain replacement

Supply & erection of 1HP single phase 50Hz water pump (open well Submersibal pump set)

Supply & erection of Smoke exhaust motor 7.5 Hp 3 phase 50Hz1500rpm induction motor ABB make with table lock pully 180 dia 2 Nos grove

Supply & erection of SS310 pipe Thermocouple 19 mmOD & 700mm length simplex

Supply & erection of 2 wire Temperature controller range 0 to 1200.c of size 99 x 99MM

Providing door lifting mechanism set for manually operating made out by 2 bearings 30mm dia and 50mm dia bore shaft and 40 x 40 x 100mm shifting block with handle and mounting bracket.

Supply & erection of 22211CK bearing for exhaust motor

Supply & erection of 311H sleeve adapter

Supply & erection of B-58 belt

Supply and replacement of Smoke exhaust motor fan shaft fabricated out of SS310 dia 50mm x 780mm length with balancing impler 2nos key slot of 10 x 10mm with computer balancing impler-380mm dia160m...

Supply and fixing of HORIZONTAL heating element suitable to operate on 220 volts 50Hz(4.5 KW capacity of heating element) element shall be made out of 8 SWG 25mm dia 6 mm pitch total length 3100 mm s...

Supply and fixing of HORIZONTAL furnace coil holding bricks (240 X 300 X 80mm) made out of refractory material to with stand a temperature of 1000 C using required refractory cement and other binding ...

Fabricating supplying and fixing of SS reducer of size 300mm x100mm dia 2mm thickness 300mm height suitable for electrical crematorium scrubber system made out of SS 304 grade material for complete in...

providing painting to slf supportingchimney of height 30 mtr wit silver 400 c20 ltrs fixing avition light lighting arrester with 2 core 1.5 sqmm copper cable and ss fabricated top canopy 2 mm thinknes...

Supplying & Fixing of copper flat used for connecting heating element with PVC insulation of size 25 x 4mm

Fabricating supplying and fixing of furnace main door front sheet with 4mm thickness checkered plate of size 1350mm x 1350mm size and bearings of 3 nos Guiding wheel 4 Nos with shaft including bear...

Scrubber work Fabricating supplying and fixing of SS Fabricated 304 sheet 3x3x3 feet 3mm thickness water tankusing 40x40x5 mm iron L angle-30 mtrs SS flat:40x5 mm25mtrsSS pipe 2 inches 6 mtrs Gate v...