Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹77.2 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹79.7 L+₹1.4 L (1.74%)Rejected-Finance 126 NARANG COLONY JANAK PURI NEW DELHI 110058 | NEW DELHI | NEW DELHI | DELHI | 110058 | L2 | Rejected-Finance Being not lowest tenderer | |
| 3 | L3₹79.7 L+₹1.4 L (1.76%)Rejected-Finance 3788 SHAH GANJ GB ROAD NEW DELHI 110006 | NEW DELHI | DELHI | DELHI | 110006 | L3 | Rejected-Finance Being not lowest tenderer | |
| 4 | L4₹83.8 L+₹5.5 L (7.04%)Rejected-Finance 0 00 NEAR KRISHNA PETROL PUMP GEEDAM ROAD JAGDALPUR BASTAR CHHATTISGARH 494001 | BASTAR | CHHATTISGARH | 494001 | L4 | Rejected-Finance Being not lowest tenderer | |
| 5 | L5₹85.1 L+₹6.8 L (8.67%)Rejected-Finance F 83 GREEN PARK MAIN NEW DELHI 110016 | NEW DELHI | NEW DELHI | DELHI | 110016 | L5 | Rejected-Finance Being not lowest tenderer |
Tender Value
₹1.1 Cr
EMD Value
₹1.8 L
Closing Date
25 Jan 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE AF TUGHLAKABAD
HQ CWE AF TUGHLAKABAD AF STATION, TUGHLAKABAD PO SANGAM VIHAR NEWDELHI-110080
IMPROVEMENT TO CERTAIN SMQs BUILDINGS NO. P-70,71 AND 76 AT AF STN PALAM UNDER GE (AF) GURGAON NO.1
2023_MES_633370_1
CWE/TKD/GUR/TOKEN-79 OF 2023-24
Open Tender
Civil Works
Item Rate
365 days
GE (AF) Gurgaon No.1
As per NIT conditions
8 documents required · 8 mandatory
₹1,000
GE (AF) Gurgaon No.1
₹1.8 L
Yes
13 Mar 2024
18 Dec 2023
27 Jan 2024
18 Dec 2023
25 Jan 2024
18 Jan 2024
Amount
Sch 'A' - Part-I (Earth Work, Dismatling and Demolition)
Dismantling of existing brick tiles in single layers on roof including tree and glass cutting, complete in all respect as specified and as directed by Engr-in-charge.
Demolition of existing mud in roofs of any thickness including plastering and leeping (whether full thickness removed or only a part thereof) (Including 4 Story building) and removing of mud as per direction by Engr in charge.
Taking down Cement Plaster from wall and ceiling of any description from Brick/concrete surfaces including raking out Joints, hacking for Key, scrubbing down with Water, etc., and removing same from the Site(s), complete all as specified and as directed. Note :- Rate included for four storey building including scaffolding and all safety measures. The rate shall be quoted accordingly.
Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store & rubbish off the premises, complete in all respect as specified and as directed by Engr-in-charge.
Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete in all respect as specified and directed by Engr-in-charge.
Dismantling of boarding, any description, fixed in any position with nails/ screws, complete in all respect as specified and directed by Engr-in-Charge.
Demolition of brick work or stone/boulders masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etac but excluding ashlars facings, dressed stone work and precast concrete articles complete all as specified and directed by Engineer-in-Charge.
Demolition of Cement Concrete (un-reinforced) of any description, not exc. 150mm thickness (above or below Ground Level) and removing the same from Site(s), complete all as specified and as directed.
Taking down door frame/ window frame with shutter of area n exc 1.50 sqm (upto 4 storey bldg), each and removing to store, complete all as specified and directed by Engr-in-Charge.
Taking down door frame/ window frame with shutter of area exc 1.50 but n exc 4.0 Sqm (upto 4 storey bldg), each and removing to store, complete in all respect as specified and directed by Engr-in-Charge
Taking down shutters only of size exc 1.00 Sqm but not exceeding 2.00 Sqm and removing to store complete all as specified and as directed.
Dismantling and re-fixing of existing PNG pipelines with reqd mtrls by M/s IGL, complete all as specified and directed by Engr-in-charge.
Removal of demolished bldg matrl eincluding loading, unloading and stacking at destination, distance more than 05 km complete all as specified and directed by Engr-in-charge.
Dismantling of old existing Cast Iron pipes of any description, jointed in cement mortar up to 100 mm dia and removing to store.
Taking down carefully copper/aluminium point wiring (light, Fan, Socket or power) fitting such as switches, ceiling roses, pendents, regulators, sockets etc complete removing material to store for keeping in safe custody and making good disturbed surfaces of walls, floors etc all as specified as directed.
Taking down carefully by unscrewing from the boards/outlets boxes fittings and fixtures such as switches, sockets ceiling, rose, lamp holders, tube light fittings, regulators etc and making good of disturbed surfaces
Taking down of existing old unserviceable submain wiring complete all as specified and as directed.
Taking down of existing old unserviceable distribution box including MCB complete all as specified and as directed.
Taking down existing damaged EWC alongwith complete PCC and lime concrete from sunken floor along with removal of debris away from the site exe 100m and n.exe 200m complete all as specified and directed. Note:- The quoted rate shall inclusive of removal of debris from any floor of the building
Sch 'A' - Part-I (B/R Work)
M&L Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 (Including 4 Story building)complete all as specified and as directed.
M&L providing cement concrete in roof or mud stops using type B-1, 1:2:4 (20mm graded aggregate) rounded or chamfered on edges or making slop on roof (Including 4 Story building) complete all as specified and as directed
M&L 25 mm, thick PCC 1:2:4 TYPE B-0 (using 12.5 mm graded stone aggregat) as in padding of floor/ roff surfaces finishees even and smooth surface, complete all as specifeid and directed.complete all as specified and as directed
M&L for 15 mm thick cement plastering in CM 1:4 on brick/concrete surfaces of roof and parapet, mixed with liquid water proofing compound as per manufacture instructions , finished even and smooth without using extra cement (Including 4 Story building) complete all as specified and as directed by Engineer-in-Charge. Note :- Water proofing compound shall be measured & paid separately.
Supply only liquid water proofing compound. Note:- The Contractor shall submit purchse voucher for claiming payment. The Engr-in-Charge shall deface the Purchase voucher and will fwd alongwith RARs/Final Bill. Non-Submission may lead to non Payment
Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated , 3 mm thick water proofing membrane,black finished reinforced with non-woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufactured of density at 25°C, 0.87 - 0.89 kg/litre and viscocity 70 - 160 cps. Over the primer coat the layer of membrane shall be laid using butane torch and sealing all joints etc., and preparing the surface complete. The joints and over lap shall be carried out as per manufature instructions. NOTE: - (i) The vital physical and chemical parameters of the membrane shall be as under : (a) Joint strength in longitudinal and transverse direction at 23°C as 650/ 450N/5cm. (b) Tear strength in longitudinal and transverse direction as 300/ 250N. (ii) The Contractor shall submit purchse voucher for claiming payment. The Engr-in-Charge shall deface the Purchase voucher and will fwd alongwith RARs/Final Bill. Non-Submission may lead to non Payment
M&L Appling one coat Bitumen water proofing aluminium heat resistance paint over APP membrane as per manufacture instructions complete all as specified and directed by Engr-in-Charge. NOTE: - The Contractor shall submit purchse voucher for claiming payment. The Engr-in-Charge shall deface the Purchase voucher and will fwd alongwith RARs/Final Bill. Non-Submission may lead to non Payment
Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with liquid water proofing cement compound as per manufacture instructions consisting of applying : (i) Fixing of 25mm dia GI pipe (medium Grade, ISI marked) spout of length 45 cm. (ii) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. (iii) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. (iv) Third Layer of 15 mm thick cement plastering in CM 1:4 over second layer after curing, mixed with liquid water proofing compound as per manufacture instructions , finished even and smooth without using extra cement. (v) Fourth Layer of applying a coat of blown bitumen 85/25 or 90/15 conforming to IS : 702 applied hot @ 1.45 Kg per square metre of area for each course,then pasteing of polythene film, 150 micron, matural colour with cold cut back adhessive. After Applying the water tightness shall be checked for 24 Hrs. (vi) Fill rest voulume of sunken floor by providing cement concrete (PCC 1:4:8) (20 mm Aggregates). Note:- Size of Sunken Floor is 1.20m x 0.90m x 0.50m
Providing and fixing in repair white vitreous china pedestal type water closet (European type W.C. pan) with seat and white lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, complete all as specified and as directed by Engineer-in-Charge. NOTE:-The Contractor shall submit purchse voucher for claiming payment. The Engr-in-Charge shall deface the Purchase voucher and will fwd alongwith RARs/Final Bill. Non-Submission may lead to non Payment
M&L for gunniting to RCC works in column beams, slabs, chajja, facia, landing, balconies etc by dismantling of RCC (loose concrete) and chipping of unsound/weak concrete material with manual Chisel and/ or by standard power driven percussion type and cutting of steel bar including cleaning the exposed concrete surface and reinforcement with wire brushes etc , after that cleaning the steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry and placing steel bars at location where the balance steel dia is less than half including fixing the steel bars in position using epoxy resin anchor grout of approved make and painting with ant rust coating on exposed steel. The surface then be fixed by welded with hard drawn steel wire fabric of size 75 x25 mm mesh or other suitable size wire mesh to be fixed (dia of wire shall not be less than 4mm) & firmly anchored to the concrete surface by means of "L" shaped mild steel shear key welded with existing reinforcement. The surface then be treated with epoxy bonding adhesive having coverage 2.20sqm/kg of approved make and providing gunniting with a minimum pressure of 2 to 2.5 Kg sqcm and providing, mixing and applying 25mm thick gunniting of SBR polymer (of approved make) modified Cement mortar in proportion of 1:4 (1 cement: 4 graded coarse sand with polymer minimum 2% by wt. of cement used) as per specifications complete all as specified and directed by Engineer-in-Charge. Note:- (i) The quoted rate shall be inclusive of all the works. (ii) Work to be carried out as in patches as directed by Engr-in-charge (iii) Rate for scaffolding upto fifth storey shall be included in quoted rate. (iv) All demolished material removed from MOD land completely distance exe 5 km. (v) The prepared area shall be neatly cleaned (vi) The rate of TMT shall not be included in the quoted rate.
M&L TMT steel bars of any dia cut to length bent shape required, including cranking bending binding with mild steel wire (annealed) not less than 0.9mm dia quality conforming to relevant IS complete all as specifieds
M&L for 'Washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 marble chipping 5 to 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water (mixed with H2SO4 @ 5% scrubbing and washing shall continue till the stone chipping are sufficiently exposed to its natural colour) to expose the stone chippings .complete all as specified (Payment for providing grooves shall be made separately).
M&L 'Forming groove of uniform size of 15 x15 mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer, including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge :
M&L for 15mm thick rendering in CM 1:4 on fair faces of brick or concrete surfaces including finishing even and smooth without extra cement all as specified and as directed by Engineer in Charge.
M&L for 15mm thick rendering on brick or concrete surfaces in internal surfaces in cement mortar 1:6, finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge.
M&L for 5mm thick rendering in CM 1:3 on concrete/gunniting surface as in ceiling finished even and smooth w/o using extra complete all as specified and directed by Engr-in-charge
M&L for preparation of newly plastered surface and including applying two coat of Acrylic Smooth exterior paint (100% acrylic) @1.67 Kg/ 10 sqm of approved colour and shade over and including a priming coat of exterior primer applied @2.20 Kg/ 10 sqm, over and including 1mm thick (avg) thick putty punning, complete in all respect as specified and as directed by Engr-in-Charge. Note:- (i) Work be carried out includig necessary scaffolding upto G+3 floor bldgs (ii) The Contractor shall submit Purchase Voucher for the same of full qunatity used at site. The Engr-in-Charge shall check the qunatity and shall verify the same before forwarding the RAR/Final Bill. Non-Submission may lead to non-payment or as part thereof.
M&L for preparation of old plastered surface and including applying two coat of Acrylic Smooth exterior paint (100% acrylic) @1.67 Kg/ 10 sqm of approved colour and shade over and including a priming coat of exterior primer applied @2.20 Kg/ 10 sqm, over and including 1mm thick (avg) thick putty punning, complete in all respect as specified and as directed by Engr-in-Charge. Note:- (i) Work be carried out includig necessary scaffolding upto G+3 floor bldgs (ii) The Contractor shall submit Purchase Voucher for the same of full qunatity used at site. The Engr-in-Charge shall check the qunatity and shall verify the same before forwarding the RAR/Final Bill. Non-Submission may lead to non-payment or as part thereof.
M&L for applying two coat of Distemper oil emulsion including chalk whiting by Auto Roller over and including a coat of primer over and including 1 mm thick(avg) putty punning including prepartion of new surface by Sanding Machine and Auto Roller complete all as specified or as directed by Engineer-in-charge.
M&L for preparation of newly plastered ceiling surface and applying three coats of white wash complete and all as specified and as directed
M&L for applying two coats synthetic enamel paint of approved make and design over and including a coat of red oxide/zinc chrome primer including preparation of new steel/iron surfaces exc 10cm in width or girth all as specified and as directed by Engineer-in-charge.
M&L for preparation of new wooden surfaces of any description, not otherwise described, over 10cm width or grith and applying two coats of synthetic enamel paint of approved make of specified texture over and including a coat of pink primer complete all as specified and directed by Engineer-in-Charge.
M&L for preparing old plastered surface of walls and applying one coats distemper oil emulsion over and including a coat of primer complete all as specified.
M&L for preparation of old decorated plastered or unplastered surface of ceilings and applying one coat of white wash, complete in all respect as specified and directed.
M&L for preparation of old surfaces of wood or wood based materials over 10cm width or girth and applying one coats of synthetic enamel paint complete all as specified.
M&L for preparation and old decorated surfaces of steel and iron surfaces of any description over 10 cm width or girth and applying one coats of synthetic enamel paint of approved make over and including a coat of primer complete all as specified and as directed.
M&L for 50 mm thick PCC 1:2:4 Type B0 (12.5mm Graded Stone Aggregate) as in sub floor etc., including rough top surface to receive floor finish complete all as specified and as directed.
Material and labour for First quality Non-skid Ceramic coloured tiles jointless, 7-8 mm thick (area of each tile exceeding 0.09 Sqm but not exceeding 0.16 Sqm) laid in floors with neat cement slurry @ 3Kg/Sqm over and including 15mm thick screed bed of cement mortar (1:6) and including pointing in white cement with pigment to match the shade of tiles including dismantling of floor, hearth or wall tiling including cemetn mortar bedding including removing from the premises complete all as specified and directed.
M&L for glazed ceramic coloured designer concept tiles matching with existing tile 350x250x7 or 450x350x7mm size as in walls set and jointed in neat cement slurry over 10mm thick recuing in cement mortar (1:4) and pointed in coloured cement to match for work on vertical surface such as skirting dado etc all as specified and as directed by Engr-in-Charge.
S & F mild steel work conforming to Fe-290, Gde E-165as in railing, bands, hold fasts, wall ties, wind ties straps, supports and stay for,Steps,laddar. rain water pipes,clamps and similar articles complete all as specified and directed.
S & F Framed work such as grills, gratings, with ornamental & intricate design for windows, ladder etc., with ends of bar shoulder &/or riveted, or forged into spikes; framed guard bars, incl hinges, framed balusters, walk ways; railings & similar work conforming to Fe 290 GDE -E-165
S&F Framed bracket of angles or box section cut to shape, drilled, including bending & welding, as necessary, gusset plates, riveting, etc. for window sun Shade, n exc 10kg each brackets, conforming to Fe 290 GDE -E-165
M&L for pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed in repair with self tapping J hooks including dismantling of existing sheet in any position complete all as specified and directed by Engr-in-Charge.
Providing and fixing 12 mm thick Marine plywood conforming to IS: 710 with 0.9mm thick decorated laminate both side pasted with adhesive as in kitchen cabinet shutter and shelves, panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows complete all as specified and directed. Note:-The Contractor shall submit Purchase Voucher for the same of full qunatity used at site. The Engr-in-Charge shall check the qunatity and shall verify the same before forwarding the RAR/Final Bill. Non-Submission may lead to non-payment or as part thereof.
M&L for brick work with sub class 'B' bricks straight or curved on plan exceeding 6m mena radius built in cement mortar 1:6 complete all as specified and directed by Engr-in-charge
M&L for 75 mm thick, PCC (1:3:6) type C-1 using 20 mm graded stone aggregates as in path , plinth protection and paving laid in panels finished even and smooth without using extra cement complete all as specified and directed. Note:- The groove demarcating panels shall be filled with hot blown bitumen
M&L glossy chequered cement concrete tiles 300x300x25mm thick, set jointed and pointed in near cement slurry in floors with white cement and pigments in any colour machine preassed glazed , over cement screed bed 20 mm thick cement motor 1:4 all as specified and as directed by Engr-in-charge.make nitco/arena or equivalent all as specified and directed by Engr-in-Charge. Note: - The contractor shall submit sample as per make listed in Appx 'B' of PS or any ISI marked subjcet to independent testing testing report by GE. The contractor shall submit purchase voucher of tiles for claiming payment.
M&L for ISI marked Rotational moulded polyethylene water storage tanks (cylindricalvertical with closed top) conforming to ISI : 12701, colour of opaque white or as approved by Engineer-in-charge, hoisted and fixed in position all as specified in SSR part-I for capacity 1000 liters incl hoisting fixing at speciifed location including tank nipple, union and Lowering/removing of unserviceable Water Storage Tank with Float Valve of any description complete all as specified and directed. NOTE: - (i) The rate includes making necessary holes for inlet, outlet & over flow pipes. The base support i/c fittings & fixtures for tank shall be paid separately. (ii) The Contractor shall submit purchase voucher and the same shall be defaced by the Engr-in-Charge before making payment. Non-submission may lead to non-payment
M&L for ISI marked Rotational moulded polyethylene water storage tanks (cylindricalvertical with closed top) conforming to ISI : 12701, colour of opaque white or as approved by Engineer-in-charge, hoisted and fixed in position all as specified in SSR part-I for capacity 500 liters incl hoisting fixing at speciifed location including tank nipple, union and Lowering/removing of unserviceable Water Storage Tank with Float Valve of any description complete all as specified and directed. NOTE: - (i) The rate includes making necessary holes for inlet, outlet & over flow pipes. The base support i/c fittings & fixtures for tank shall be paid separately. (ii) The Contractor shall submit purchase voucher and the same shall be defaced by the Engr-in-Charge before making payment. Non-submission may lead to non-payment
S&F in repairs ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed 25 mm bore complete all as specified and directed by Engineer in charge.
S&F in repairs, 20 mm Bore gun metal Gate/Globe half turn valves with iron wheel/Lever fixed-in-repairs complete all as specified and directed by Engineer in charge.
S&F for 20mm dia CPVC SDR 11 pipe fixed to concealed/wall, ceilling,laid in floor etc incl all fittings with solvant anf brass threaded fittings for fixing taps etc including Taking down unserviceable 15 mm Steel Water Tubing 20mm with Fittings and Connections, including water tighteness test etc., complete all as specified and as directed.
S&F for 25mm dia CPVC SDR 11 pipe fixed to concealed/wall, ceilling, laid in floor etc incl all fittings with solvant and brass threaded fittings for fixing taps etc including Taking down unserviceable 20 mm Steel Water Tubing with Fittings and Connections, etc., including water tightness test complete all as specified and as directed.
S&F Galvanised Steel Water Tubing 15mm Bore (dia), ‘Medium Grade’ ISI marked with all Fittings, fixed to concealed or on Walls, Ceiling or laid in Floors or any other Situation including Taking up down unserviceable Steel Water Tubing with Fittings and Connections, etc. complete all as specified and as directed.
S&F Galvanised Steel Water Tubing 20mm Bore (dia), ‘Medium Grade’ ISI marked with all Fittings, fixed to concealed or on Walls, Ceiling or laid in Floors or any other Situ-ation including Taking up or down unserviceable Steel Water Tubing with Fittings and Connections, etc. complete all as specified and as directed.
S&F in repairs Angle Stop Cock 15mm Bore (dia), Chromium Plated, screwed down, screwed for Iron Pipe or for Brass Ferrule and fixed-in-repairs complete all as specified and as directed.
S&F in repair Brass CP Health Faucet, as Approved, including Taking down unserviceable Health Fosset of any description, complete as all specified and directed.
S&F in repair Brass CP fancy Bib Cock 15mm Bore (dia), Chromium Plated Long Body, screwed down, screwed for Iron Pipe or for Brass Ferrule and fixed-in-repairs, complete all as specified and as directed.
S&F in repair 2 in one Bib Taps 15mm Bore, Cast Copper Alloy,with crutch or butterfly screwed down, screwed for Iron Pipe or for Brass Ferrule and fixed-in-repairs, complete all as specified and as directed.
Providing & fixing White vitreous china water closet squatting pan (Indian type) Orissa pattern W.C Pan of size 580x440 mm along with "S" or "P" trap including dismantling of old WC seat and "S" or "P" trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge including provision of 150mm thick Lime Concrete Bedding complete all as specified and as directed.
S&F in repair PVC Flushing Cistern 10 LITRE capacity conforming to IS : 7231, Low Level Valve Less, Symphonic Action type, White, with Inlet, Ball Valve, Float and Handle including a Pair of Cast Iron Brackets duly Painted/Erecting Stand and PVC connection pipe 15mm size, PVC Flush Pipe of polythene 32mm dia for Low Level Flushing Cistern including Cutting and Pinning in Ends, Making Good Disturbed Surfaces in Cement Mortar 1:3 and fixed including Taking down/out Unserviceable Flushing Cistern and connected Items, complete all as specified and as directed.
S&F in repair Vitreous China Wash Hand Basin 630X450mm in size, White (Flat Back Type) with 32mm dia Brass Chromium Plated Waste Fitting,UPVC Bottle trap, Chromium plated pillar tap, UPVC’ 32mm bore Waste Pipe, a Pair of Cast Iron Brackets duly Painted/ Erecting Stand including Cutting and Pinning in Ends, Making Good Disturbed Surfaces in Cement Mortar 1:3 and fixed including Taking down Unserviceable Wash Hand Basin and connected Items, complete all as specified and as directed.
S&F in repair for high pressure PVC connection pipe 15mm dia with Brass CP Check nut and rubber washer complete with 600 mm length complete all as specified and as directed by Engr-in-Charge.
S&F in repairs Vitreous China Soap Dish, Single, as Approved, fixing with Brass Chromium Plated Screws including Taking down unserviceable Soap Dish of any description, complete as all specified and directed.
S&F in repairs Brass CP Towel Rail 600mm Long, as Approved, fixed complete as all specified and directed.
S&F in repair Chromium plated shower roses with Stainless Steel extension rod with swivel joints, of 125 mm size,including fixing to steel pipe or union complete all as specified and as directed by Engr-in-Charge.
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes 110 mm in Bore (dia), Single Socketed conforming to IS : 13592 Type B (SWR), including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion including taking down of old pipe of any size and discription and removal from site complete all as specified and directed.
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes 75 mm in Bore (dia), Single Socketed conforming to IS : 13592 Type B (SWR), including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion including taking down of old pipe of any size and discription and removal from site complete all as specified and directed.
S&F 75mm dia Sand cast iron S&S pipe as per IS: 1729 for soil, waste and vent pipes in any length with or without ears with cement joints fixed to walls complete all specified and directed.
S&F 100mm dia Sand cast iron S&S pipe as per IS: 1729 fo soil, waste and vent pipes in any length with or without ears with cement joints fixed to walls with oval access door complete all specified and dirceted.
Providing and fixing on wall face unplasticised - PVC moulded followings fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type B(SWR), including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion complete all as specifed and directed
Single tee with door : 75 mm
Bend 87.5° : 75 mm
Bend 87.5° : 100 mm
Providing and fixing 75mm bend of Sand cast iron S&S as per IS - 1729 of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete complete all as specifed and directed
S&F 75mm dia Sand cast iron S&S as per IS - 1729 branch pieces, single (equal or unequal) ordinary or inverted (Spigot or socket type) or with paralled branches with ovel access door
Providing and fixing 100 mm bend of Sand cast iron S&S as per IS - 1729 of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete complete all as specifed and directed
S&F 100mm dia Sand cast iron S&S as per IS - 1729 branch pieces, single (equal or unequal) ordinary or inverted (Spigot or socket type) or with paralled branches with ovel access door
M&L in repair of 75mm outlet CI floor/nahani trap with steel grating including jointing and breaking/ dismantling any type of floor and making good cement concrete to the B-1 (1:2:4) and testing after repairs and taking down existing trap etc complete all as specified and directed by Engr-in-Charge
S&F stack clamp out of 50 mm by 5 mm flat GI angle and 16 mm dia round iron stays/ U bolt and nut with washer for 75 and 100 mm dia pipe, complete in all respect as speicifed and directed.
S&F in repair Stainless Steel Kitchen Sink with Drainage Board of Overall Size 915X460mm and Bowl Size 410X330X160mm, made of Stainless Steel 1.0mm thick Sheet with Plugs, Chromium Plated Waste Coupling and Washer including Bedding in Cement Mortar 1:4 to Dwarf Wall or fixing Cantilever Brackets and Connection to Pipe including Taking down unserviceable Sink and Connected Items complete all as specified and as directed by Engr-in-Charge.
S&F in repair,Stainless steel Plate rack of size 24"x36"x10"(all dimensions in inches) complete all as specified and directed by Engr in charge Cat Part No-KR-572 of Make-Shakti or equivalent out of makes specified in list of makes.
S&F Coloured powder decorative end Knob for vista rod 25mm dia fancy type as directed.
S&F Mild steel works Fe-290, Gde -165 as in framed works such as door frame using box section/ grills/ guard bar and railing with ends of bars shoulders and or riveted or forged into spiked complete.
Providing and fixing pressed steel door frames of size 125x 60 mm conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface including fixing with adjustable lugs with split end tail to each jamb as directed by Engineer-in-charge:
M&L PCC 1:3:6 type C-1 using 20 mm graded stone aggregate for filling in bed block of hold fast etc complete all as specified and as directed.
Providing and fixing Second class teak wood wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). complete all as specified and directed.
Providing and fixing factory made PVC Solid moulded Architrave door frame of size 50x47 mm with awall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer’s specification and direction. NOTE:- The purchase Voucher of materials shall be submitted for claiming payment. Non Submission may lead to non payment
Providing and fixing ISI marked 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters complete all as specified and directed.
S&F 35 mm thick factory made, second class teak hard wood, plain framed, panelled shutter (two panel) with lock rail and the size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated, open repated and prepared to receive framing plain chamfered or rounded fitted with cut and mitered heads for securing glass etc complete all as specified and directed.
S & F for 30 mm thick factory made solid panel both side prelaminated PVC door shutter with smooth finish confirming to criteria of testing as per IS : 4020, consisting of frame made out of MS tube of 19 guage thickness & size 19x19mm for stiles and 15x15mm for top & bottom rails MS frames shall have a coat of red oxide primer of approved make and shall be covered with 5mm thick heat moulded both side prelaminated PVC `C' channel of size 30x50mm forming styles and 5mm thick 75mm wide both side prelaminated PVC sheets for top rail lock rail and bottom rail on either side and 10mm (5mmx2) thick 20mm wide cross both side prelaminated PVC sheet as gap insert for top rail and bottom rail panelling of 5 mm thick both side prelaminated PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rail with 30 mm wide x 5 mm thick both side prelaminated PVC sheet beading on either side and joined together with solvent cement, adhesive and an additional 5 mm thick PVC strip of 20 mm width is to be struck on the interior side of 'C' channel using PVC solvent adhesive complete as per manufacturers specifications & drawings ass as directed. NOTE:- The purchase Voucher of materials shall be submitted for claiming payment. Non Submission may lead to non payment
S&F steel windows with glazing bars, side hung shutters with projecting type hinges, including steel handle, and steel peg stay dovetailed or welded ,complete in all respect as specified and directed.
S&F steel windows without glazing bars, side hung shutters with projecting type hinges, including steel handle, and mild steel flat strip for fixing wire mesh with nut and bolt, dovetailed or welded ,complete in all respect as specified and directed.
S&F factory made steel ventilator with top hung shutter including hinges steel peg stay, complete in all respect as specified and directed.
S&F Mild Steel Butt Hinges 100mm, Medium Weight, Cold Rolled ISI Marked and fixed, complete all as specified and as directed.
S&F 200 mm ISI marked Aluminium alloy, anodised, sliding door bolt with hasp, staple (Bolt type ) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed by Engr-in-Charge.
Providing and fixing Powder coated aluminium tower bolts of size 200x10mm, ISI marked, (minimum thickness of powder coating 50 micron)) transparent or dyed to required colour or shade, with necessary screws etc. complete all as specified and directed
Providing and fixing Powder coated aluminium handles of size 150 mm, ISI marked, (minimum thickness of powder coating 50 micron) transparent or dyed to required colour or shade, with necessary screws etc. complete all as specified and directed
Providing and fixing glazing with float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) in aluminium/wooden/steel door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket/ oil putty/ bead etc. complete as per the architectural drawings and the directions of engineer-in-charge .
S & F in repair stainless steel grade 304 wire gauge with 0.5 mm dia. wire and 1.4mm wide aperture with matching wood/alumium beading and fixed with tinned tacks to stainless steel screws etc complete all as specified & directed.
S&F in repair stainless steel 25mm dia tubular curtain rods fancy type including chromium plated brass brackets and fixing with walls and making good of disturbed surface etc complete all as specified and direced by Engr-in-Charge.
M&L for Welding by gas or electric plant including transportation of plant at site etc. complete. complete all as specified and directed
S&F Brass Hat Pegs, Solid body, 175 mm to 250 mm and fixed, complete in all respect as specified and as directed by Engr-in-Charge.
M & L for PCC 1:2:4 Type B1 (using 20mm Graded stone aggregate) as in for fixing posts, bed plates, anchor blocks, corbels, brackets, including necessary form work etc. complete all as specified and as directed.
Sch 'A' - Part-I (E/M Work)
M&L for point wiring complete with 1.5 Sqmm (nominal area) PVC insulated, multi stranded, FRLSH copper conductor cable unsheathed in and including 20 mm medium grade ISI Marked concealed PVC conduit with all fittings and including PVC insulated FRLSH copper conductor cable of size 1.5 sq mm as earth wire all as specified and as directed by Engr-in-charge, NOTE:- (i) The works includes cutting and making good disturbed surfaces and rate deemed to included in quated rate. (ii) The contractor are requetsed to plan the work so that laying of conduit is finished during plaster stage (iii). The contractor shall submit Purchase voucher of All type of FRLSH wires used at site
For one light/fan/exhaust point controlled by one way switch all as specified and directed.
One 3 pin socket outlet 5 amps on the same board with the other switches, with cable 1.5Sqmm size.
One 3 pin socket outlet 5 amps on independent board (The distance of independednt board shall not be more than 3.00 m)
One bell/buzzer point controlled by one push button on the same board with other switch or independent with cable 1.5sqmm size
One light point controlled by two 2-way switches, with cables 1.5 sq. mm size
All as per item No 118 here in before but using 2.5 sqmm single core multi stranded copper conductor PVC insulated and unsheathed, ( FRLSH ) cable for 1 5 Amp socket outlet on independent board including 2.5 sqmm multi stranded copper conductor cable of green colour as continuous earth wire with lugs etc including taking down of old u/s wiring required complete all as specified and directed.
Supply and fix in replacement of switch piano, flush type single pole, one way, 5 Amps, 240 volts all as specified and directed at site.
Supply and fixing in replacement of socket outlet, 3 pin 5 Amps all as specified and directed at site.
Supply and fix in replacement of switch piano, flush type single pole, one way, 15 Amps, 240 volts all as specified and directed at site.
S & F Socket outlet piano type 2 in 1, 3 pin, 5 and 15 amp flush type complete all as specified and directed by Engr-in-Charge.
S & F 5 Amp 2 way flush type complete all as specified and directed by Engr-in-Charge.
S&F Bell push, flush type, 5 amp complete all as specified and directed by Engr-in-Charge.
Supply & Fixing of Ceiling Rose, 3 phase polycarbonate isolated body complete all as specified & directed by Engineer - In-Charge.
S&F five-stepped type electronic fan regulator flush type on the existing phenolic laminatedsheet etc complete all as specified and directed
Supply & Fixing of Buzzer, Ding Dong AC. 230 volts, single pole complete all as specified and directed at site.
NOTE for Item no. 125 to 133 (i) The Contractor shall submit Purchase Voucher for the same of full qunatity used at site. The Engr-in-Charge shall check the qunatity and shall verify the same before forwarding the RAR/Final Bill. Non-Submission may lead to non-payment or as part thereof.
Taking down and Fixing only old serviceable Buzzer, Ding Dong A and connecting up including provision of cable from ceiling rose after cleaning complete all as specified and as directed.
Removing and refixing LED lights/Mirror light/ bulkhead fitting of any capacity, 220V, AC decorative box type after cleaning with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.
Supply and fixing LED lights fitting 1x 16W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.
Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed.
S&F in repair bracket made of GI pipe light grade 40mm bore bent to shape as required at site for street light fitting 1.2 m in length and fixed on wall/pole including necessary MS clamps, nuts, bolts etc complete all as specified and as directed.
S&F submain wiring with unsheathed multi-stranded FRLSH copper conductor cable 1100 volts grade drawn through in and including PVC rigid conduit medium grade of not less than 25mm dia with conduit accessories and concealed in wall/surface of ceiling for two runs of 6 Sqmm single core FRLSH Grade and one run of 6 Sqmm PVC insulated copper conductor FRLSH for earth continuity wire between main DB to Sub main DB/ AC plug points complete all as specified and as directed. Note :- Two run of single core cable with one run of earth continuity conductor and PVC conduit and accessories will be measured as one length including cutting chasing in wall complete. Note: Rates are deemed to be included for chases of conduit and sunking for boxes cutting and making holes in wall/floor for passing in or through conduit.
Ditto as above item but 2x1.5 sq. mm + 1x1.5 sq. mm earth wire complete all as specified and as directed.
Ditto as above item but 2x4 sq. mm + 1x4 sq. mm earth wire complete all as specified and as directed.
Ditto as above item but 2x2.5 sq. mm + 1x2.5 sq. mm earth wire complete all as specified and as directed.
Material and labour of existing electric energy meter incl fixing/concealed of new meter steel box of size 270x225x135 mm inside the wall and fixing the meter inside the box incl connection of inccomming and outgoing cable with all fitting acessaries complete all as specified by engr-in-charge.
Supply and fix in replacement of factory made epoxy polyster powder coated distribution board SP&N 8 way fabricated from minimum 1.6 mm thick CRCA sheet with double door (IP-43 protection) fixed flush to wall and standard DIN rail, earth bar and cable ties for cable management, suitable for one incoming and 6 outgoings complete all as specified and confirming to IS: 8623 (Make: Legrand /Siemens). Note: Cutting on wall and taking out old one and then flushing new DB and making all the connection as before and any accessories required to fix the DB including making good the disturbed surface is deemed to be included in quoted rate. Make: Legrand /Siemens/Schneider.
S&F in repalcement of MCB SP 6-32 Amps ,10 KA 230 Volts ,50 HZ complete all as specified and as directed by Engineer -in -charge .Make : Make: Legrand /Siemens/Schneider.
Removing MCB from old unseviceable distribution board and refixing of MCB in new distribution board complete all as specified and directed by Engineer-in-charge.
S&F in repalcement of MCB SPN 63 Amps ,10 KA 230 Volts ,50 HZ complete all as specified and as directed by Engineer -in -charge .Make: Legrand /Siemens/Schneider.
Supply and fix in replacement of factory made epoxy polyster powder coated VTPN distribution board Triple pole MCB 4 way 415V fabricated from minimum 1.6 mm thick CRCA sheet with double door (IP-43 protection) fixed flush to wall and standard DIN rail, earth bar and cable ties for cable management, provision for 125 Amps MCCB as one incommer and 12 outgoings single pole MCB with 2 Neutral bar, 2 Earthbar, Fully insulated busbar rated capacity above 160Amp, shrouded Neutral bars and cable ties for cable management complete all as specified and confirming to IEC 61439-3,Reversible door IP 43 & IP 54. Make: Legrand /Siemens/Schneider. Note: Cutting on wall and taking out old one and then flushing new DB and making all the connection as before and any accessories required to fix the DB including making good the disturbed surface is deemed to be included in quoted rate.
Supply & Fixing MCCB 125 Amps 4 Pole, 415 V, fixed thermal & fixed magnetic setting electromechanical type with Ics=75 % of Icu , with breaking capacity 16 KA conforming to IS: 13947-II complete all as specified and as directed.
M& L for earthing complete with galvanized steel earth plate electrode 60cmx60cmx6.3mm thick, buried directly in ground(earthpit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead with 4mm dia with protection pipe 15mm GI Light grade PIpe by means of bolts, nuts and check nuts and washers of GI or steel all as shown in Electrical plate No 3 including earth work funnel with watering arrangement, wire mesh, GI pipe 20mm internal dia light grade buried directly vertical and adjacent to the electrode for watering , PCC pit 1:3:6 type C1 and RCC chamber cover in 1:2:4 type B1 of size 550 x 550mm with 8 mm dia TMT bar of 100mm C/C both ways including of returning, filling in and removal of surplus soil to a distance not exc 50 m as specified and directed by Engr-in-charge including testing on completion. Note: The strip/wire upto 7.5mtr included in the quoted rate.
S&F Single pole and neutral enclosure with a two pin and earth including plug and socket complete set with one single pole and neutral MCB of 20 Amps,complete all as specified and directed.
Hanging only ceiling fan (M.D. supply) and connecting up including provision of cable from ceiling rose or connector to fan and M&L Painting of ceiling fans complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc
Taking down and Fixing only exhaust fan (M.D. supply) and connecting up including provision of cable from ceiling rose/connector to fan after cleaning complete all as specified and as directed.
Schedule of Credit
Atish Builders LLP
Commercial Traders
POOJA ENTERPRISES
Green Leaves
Parveen Builders
M/S Parshant Associates
BRIJ MOHAN LAL AND CO.
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .