M/o Building (C/o One Room With Toilet for Library in Community Center Hoshiyarpur) Noida

CAPABILITY STATEMENT

* It is Compulsory for the bidder to fill this statement and the bidder must upload only those document that support this statement

Tender Reference No : 28/NOIDA/DyGM/SM-WC-03/2025-26 Select

Tender :-M/o Building (C/o One Room With Toilet for Library in Community Center Hoshiyarpur) Noida Provided

Name of Tenderer QUALIFIED

TOTAL NIT COST OF PROJECT (In Rs.) 2094706.65

S. NO. ELIGIBILITY CRITERIA (Value To Be Filled By the Tenderer (In Indian Rs.) Status FINAL STATUS

1 SOLVENCY (Issued within a period of minimum six months). 40% OF TOTAL ESTIMATED COST NOT QUALIFIED NOT QUALIFIED

2 EXPERIENCE (WITH GOVERNMENT/SEMI- GOVERNEMTN/ PSUs ONLY) completed works during the last 7 years ending last day of the month previous to the one in which applications are invited Three similar completed works each costing not less than the amount equal to 40% of estimated cost put to tender NOT QUALIFIED

Two similar completed works each costing not less than the amount equal to 60% of estimated cost put to tender NOT QUALIFIED NOT QUALIFIED

One similar completed works costing not less than the amount equal to 80% of estimated cost put to tender NOT QUALIFIED NOT QUALIFIED

For Similarity of Works:- Experience in only building construction, CC road, footpath, drain, box culvert, central verge, painting, common maintenance of roads, building, boundary wall, interlocking tiles, drain & cement related woks will be acceptable. Experience in sewer and water supply works will not be acceptable

RESULT OF EXPERIENCE NOT QUALIFIED

3 TURNOVER (During the immediate LAST 3 consecutive financial years) 30% OF TOTAL ESTIMATED COST

YEAR1 0 NOT QUALIFIED NOT QUALIFIED

Average annual financial turnover on construction works should be atleast 30% of the estimate cost during the immediate last 3 consecutive fiancial years. Affidavit should be submitted by the contractor/firm with C.A. Certificate.

4 Required Technical Staff Select

5 Required Machinary Select

6 Character Certificate of Indivisual /partners /directors issued by District Megistrate Select

7 Affidavit of not blacklisted Select

8 Address Proof/Id. Proof of indivisual /partners/directors. Select

9 Registration certificate of GST Select

10 Filled in form Capability Statement. Select

11 Affidavit for No Blood Relation in Noida Authority.

12 Certified Copies of relevant pages of following documents: Select

a) Memorandum and Article of Association showing objectives of the Company / firm and authority to sign the e-Bid/contract or delegate the power to others for signing the e-Bid/contract. Select

b) Place of registration. Select

c) The power-of-attorney authorizing the tenderer to sign the e-Bid/ contract. Select

d) PAN certificate of the company/firm. Select

e) GST registration certificate of the company/firm. Select

f) Rs 100 Photo affidavit as per attached proforma in Tender Document

Select, At Par, Excess (+), Less (-) IOCL

Tender Inviting Authority:

Name of Work: M/o Building (C/o One Room With Toilet for Library in Community Center Hoshiyarpur) Noida

Contract No: 28/NOIDA/DyGM/SM-WC-03/2025-26

NOTE (GST WILL BE PAID TO APPLICANT AS PER NORMS)

Sl. No. Item Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category

1 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exccding 30 cm in depth, 1.5m in width or 10 sqm on plan) including disposal of excavated lead upto 50 mtr. & lift upto 1.5Mtr. dispose earth to be leveled & dressed. : All kinds of soil. The Contractor has to detect Different utilities like sewer line, water Supply line, electric cable, telephone cable, gas pipe line etc. using utility detecting machine before start of excavation and shall start excavation only after getting permission of Engineer-in-Charge Cum Excess(+) Full Conversion INR

2 Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) DSR 18/I.No. 4.1.8/P- Cum Excess(+) Full Conversion INR

3 Earth work in embankment in ordinary soil embankment to be in 20cm. layers breaking clods, watering rolling each layers with 0.5 tonne roller or wooden/steel rammer and rolling every third or top most layer with power roller of minimum 8 tonne roller including ramming dressing the surface to required level and slope including all lift and all lead(earth shall be brought from place which is beyond Noida area) including carriage of earth by mechanical transportation and all T & P labour etc. required for proper completion of work (earth shall be arranged by the contractor at his own cost. Cum Excess(+) Full Conversion INR

4 Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles above 25 mm and up to 40 mm Sqm. Excess(+) Full Conversion INR

5 Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) Cum. Excess(+) Full Conversion INR

6 Providing and laying in position ready mixed M-25 grade concrete for reinforced cement concrete work, using cement content as per approved design mix, manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work, including pumping of R.M.C. from transit mixer to site of laying, excluding the cost of centering, shuttering finishing and reinforcement, including cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer - in - charge. (Note :- Cement content considered in this item is @ 330 kg/cum. Excess/less cement used as per design mix is payable/ recoverable separately). All works upto plinth level Cum Excess(+) Full Conversion INR

7 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level, Thermo Mechanically Treated bars of grade Fo_500D or more. Iten No.-5.22.6 Kg Excess(+) Full Conversion INR

8 Centring and shuttering including strutting, propping etc. and removal of form work for. Foundation, footings, bases of Columns etc for mass concrete. Sqm Excess(+) Full Conversion INR

9 Centering and shuttering including strutting, propping etc. and removal of form for : Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. Sqm Excess(+) Full Conversion INR

10 Centering and shuttering including strutting, propping etc. and removal of form for : Suspended floors, roofs, landings, balconies and access, platform DSR 18/I.No. 5.9.3/P- Sqm Excess(+) Full Conversion INR

11 M- 150 Brick Work In 1:6 cement & fine sand 1.25 F.M. mortar in foundation and plinth including supply of all materials, labour and T&P etc. requried for proper compietion of the work. SOR I.NO.6.02/ 303 Cum Excess(+) Full Conversion INR

12 Brick work with non modular flyash brick conforming to IS: 12894, Class designation 10 average compressive strength in super structure above plinth level up to floor V level in SOR I.NO. 24.01 NEW ITEM Cement Mortar 1:4 (1 Cement 4 Coarse sand) Cum Excess(+) Full Conversion INR

13 Reinforced cement concrete work in beams, suspended floors roofs having slope up to 15 degree landings balconies shelves chajjas lintels bands plain window sills staircases and spiral stair cases above plinth level up to floor five level excluding the cost of centering shuttering finishing and reinforcement with 1:1.5:3(1 cement: 1.5 coars sand ( zone- III ) : graded stone aggregate 20 mm nominal size ). 28.57 Cum 8444.41 Excess(+) Full Conversion INR

14 12 mm cement plaster of mix : 1:4 (1 cement : 4 coarse sand) (DSR-18/I-13.4.1/P-222) Sqm Excess(+) Full Conversion INR

15 Washed stone grit plaster on exterior walls of height upto 10 M. above level in two layers,under layer 12mm cement plaster 1:4 (1 cement : 4 coarse sand ) furrowing the under layer with scratching tool,applying cement slurry on the under layer @ 2 Kg of cement /Sqm top layer 15mm cement plater 1:1/2:2 (1 cement: 1/2 C sand: 2 stone chipping 10mm N.S.) in panels with groove all around as per approved pattern i/c scrubbing and washing the top layer with brusshes and water to expose the stone chipping complete as per. Sqm Excess(+) Full Conversion INR

16 Forming groove of uniform size in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer, including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge : 15 mm wide and 15 mm deep groove. DSR 18/I.No. 13.73.1/P-228 Rm Excess(+) Full Conversion INR

17 Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1: 4 (1 cement : 4 coarse sand) 25 mm thick. Sqm Excess(+) Full Conversion INR

18 Kota stone slabs 25 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. DSR-18/I. No. 11.27 Sqm Excess(+) Full Conversion INR

19 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigment etc., complete. DSR 18/I.No. 11.37/P- Sqm Excess(+) Full Conversion INR

20 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. DSR 18/I.No. 8.31 sqm Excess(+) Full Conversion INR

21 P/F CPVC pipes, having thermal stability for hot & cold Water supply including all CPVC plain & brass threaded fittings 20 mm nominal outer dia Pipes mtr Excess(+) Full Conversion INR

22 P/F CPVC pipes, having thermal stability for hot & cold Water supply including all CPVC plain & brass threaded fittings 25 mm nominal outer dia Pipes mtr Excess(+) Full Conversion INR

23 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. DSR/I. no. 18.48 per litre Excess(+) Full Conversion INR

24 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40mmflush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid. DSR-2018/I.No:17.2.1 Each Excess(+) Full Conversion INR

25 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively. each Excess(+) Full Conversion INR

26 Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 15 mm nominal bore. DSR 18/I.No. 18.49.1/P-300 Each Excess(+) Full Conversion INR

27 Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. : 15 mm nominal bore. DSR/I. no. 18.52.1 Each Excess(+) Full Conversion INR

28 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Surgeon type wash basin of size 660x460 mm with a pair of 15 mm C.P. brass pillar taps with elbow including operated levers. DSR/I. no. 17.7.8 Each Excess(+) Full Conversion INR

29 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 75 mm diameter. DSR 18/I.No. 12.41.1/P- Mtr. Excess(+) Full Conversion INR

30 U-PVC pipe (working pressure 4 kg) Cm square single shocket pipe 110 mm dia mtr Excess(+) Full Conversion INR

31 12 mm thick frameless toughened glass door shutter including providing and fixing top & bottom Sqm Excess(+) Full Conversion INR

32 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters : 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. DSR 13/I.No. 9.21.1/P- Sqm Excess(+) Full Conversion INR

33 Grading terracing of mud phaska covered with tiles or bricks Sqm Excess(+) Full Conversion INR

34 Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design :In 75x75 mm deep chase (DSR-18/I-12.21.1/P-189). Rm Excess(+) Full Conversion INR

35 Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (DSR-18/I-12.22 each Excess(+) Full Conversion INR

36 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. Each Excess(+) Full Conversion INR

37 Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. DSR 18/I.No. 10.25.2./P- Kg Excess(+) Full Conversion INR

38 Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. 10 litre capacity - White. DSR 18/I.No. 17.18.1 Each Excess(+) Full Conversion INR

39 Providing and fixing on wall face unplasticised PVC moulded fittings/ accessories for unplasticised Rigid. PVC rain water pipes conforming to IS: 13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10 mm gap for thermal expansion Single Tee with Door 110x110x110 mm. DSR/1, no. 12.42.3.2 each 176.48 Excess(+) Full Conversion INR

40 Mirror polishing on marble work/Granite work/stone work where ever required to give high gloss finish complete. DSR-18/1.NO-8.6 Sqm Excess(+) Full Conversion INR

41 Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast Jugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately). Second class teak wood DSR-18/1.No. 9.1.1 Cum 105345.15 Excess(+) Full Conversion INR

42 Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of shutters (over all area of door shutter to be measured) Over Item no. 9.20 and 9.21. DSR-2018/1. no. 9.23 Sqm 348.45 Excess(+) Full Conversion INR

43 Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc, complete 2nd class Ieak wood 50x12 mm. DSR-2018/1.no. 9.40,1,1 Mtr 116.35 Excess(+) Full Conversion INR

44 Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 nim dianicter bolts, nuts and wooden plugs and embedding in coment concrete block 30x10x15cm 1:3:6 mix (1 cement: 3 coarse sand: 6 graded stone aggregate 20min nominal size) DSR-18/1, No. 9.53 Each 124.81 Excess(+) Full Conversion INR

45 Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS: 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm) with necessary accessories and screws etc, complete, DSR-2018/1.no.9.83 Each 838.75 Excess(+) Full Conversion INR

46 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe 40 mm dia DSR-16/I.No: 17.28.2.2 each Excess(+) Full Conversion INR

47 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931: 15mm nominal bore. DSR/I. no. 18.53.1 Each Excess(+) Full Conversion INR

48 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 25 mm nominal bore. DSR/I. no. 18.17.1 Each Excess(+) Full Conversion INR

Total in Figures

Quoted Rate in Figures Select

Please Enable Macros to View BoQ information