NIT No. 18 Item 02

Providing and fixing 63A TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in the cubicle panel, making connections, etc. as required. Make-DJB Approved.

Supply of 72 W LED fitting street light luminaire of versatile pressure die cast aluminum with high power LED as light source, electronic driver with all accessories: Make-Philips/Bajaj/Havells/Crompton greaves Or DJB Approved make.

Supply of PVC armored aluminum conductor cable 1.1 KV of size 4X10 Sq.mm Make: - Grandly/Gloster/Havells

Supply of SMC junction boxes anti corrosive water resistance UV Protected High temp resistant, confirming, to UL 94 VO standard ERDA Approved suitable for all kinds of weather able condition, retardant and high dielectric strength maintenance free Make- Syntax/Binani.

Supply of Copper wire single core 440 volts flexible Unsheathed of size 1.5 sq mm Make: - Finolex/Grandly/Glostrer/Havells.

Supply of HDPE pipe 63/50 i/o dia for protection of armored aluminum cable. Make-Any DJB Approved

Supply of G.I. bend which is twisted to 105-degree angle 1.0 mtr long B class 35mm dia aluminum painted suitable for outer diameter of lights.

Supply of M.S. clamp with nut & bolts duly painted suitable for 35mm dia G.I. bend and connection box as required.

Supplying, installing, testing and commissioning of 63A capacity TPN tap off box made of 1.6mm thick sheet steel enclosure duly painted with powder coating on existing rising mains complete with TPN disconnect or FSU and HRC fuses, connections, earthing etc. as required.

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of 10 sq. mm size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.

Installation of 72-watt LED fitting on the 8 mtr pole with fixing of connection box with the help of clamps along with G.I. bend duly clamped with the pole from earth to the connection box inside which the cable to be inserted. The job also includes wiring and connections from connection box to the lights at top with copper wire taken proper thumbling, tapping etc. as per I.E.R. to make the unit functional.

Installation of Junction boxes on each street light pole with the help of nuts and bolts etc. The junction boxes should have Mini SPMCB of 10A. Make of MCB-Havells/L&T/Any DJB Approved.

Painting of Street Light Pole of 8 mtr Long & Landscape light 4 Mtr approx. first with red oxide primer then with good quality aluminum paint two or three coats as per site requirement taking all safety measures and arranging all tools and tackles as per site requirement.

Testing and commissioning of complete street light poles in the presence of Engineer In Charge till full satisfactions.

Transportation charges to & fro.

Devraj Enterprises

MK ENGG.CO.