BID NO-UED/267/2025-26

A) Erection Part

ERECTION PART 11kV HT Line

Erection of S.T Two Pole Str. 11 Mtr. Long :- Digging of Pit fixing of insulator, disc and drilling of holes in X-Arm , Bracing Set, Top Clamp, erection of pole, fixing of barbed wire and danger plate, filling of Pit , Alluminium Paint and ramming & painting of poles complete in all respect.

Stringing and sagging conductor:- Laying of conductor stringing and sagging, binding with insulator complete in all respect.

Laying of G.I Wire, Stringing, Sagging and binding complete in all respect.

Fixing of earthing pipe of pit for coal earthing, fixing of G.I wire to system filling of pit and remaning work complete in all respect.

Erection of Stay Set HT:- Digging of Pit fixing of Stay Rod, filling of Pit, Nozeiling & Tightning complete in all respect.

Mannual carriage from road to site ,transportation charges from central store to site and loading- unloading in all respect (IN ALL HEAD) average distance at site

ERECTION PART 11/0.4kV,63 KVA Sub-Station

Erection of63 kva S/Stn. Str including dismentled existing 11/0.4kv,63 kva Sub-Station and shifted to another site .:-Digging of Pit for S/T Pole and earthing, drilling of holes in X-arm, preparation of plate form str. Member CI, Alluminium Paint AI i.e X-arml, Knee bracing set, erection of D-pole,errection of plate form, ercetion of x-Arm, drop out, fuse unit, linghting arrestor, MCCB Switch of LT Box, Energy Meter, Erection of T/F, and earthing conn. to T/F G.O Switch lightning etc. erection of Stay Set, Erection of Jumper, Pipe earthing 3 Nos., Erection of LT cable, brabed wire and painting, 3 Nos. earthing to S/Stn. by prov. 50Kg Salt charcole in each earthing i/c construction of trench for earthing as per REC Board Standard complete in all respect.

Supplying and fixing wovenplains G.I. Wire fencing of mash 50x150mm (Aproximate quantity 24 m2) icluding vertical post 2 mtrs. ISA hight and 0.60mtrs. embeded in concrete 1:2:4 (6Nos) ISA 65x65x6 mm & steel gate including all fitting (approximate weight 30 Kg. ) complete.

Mannual carriage from road to site ,transportation charges from central store to site and loading- unloading in all respect (IN ALL HEAD) average distance at site

SUPPLY PART. 11kV HT Line

Prov. Steel Tublar 11 mtr long with cap. (Provided By HPSEBL)

Prov. RCC Muff

Prov.AAAC 7/4.26 mm Conductor (Provided By HPSEBL)

Prov.G.I.Wire No. 8 SWG in mtr. (Provided By HPSEBL)

Prov.X-Bracing Set.MS Angle Iron (50x50x6 mm) Length 2125 mm x2 Nos.

Prov.X-Arm (Horizontal) MS-Channel Iron (100x50x6mm) Length 2340 mm x2 Nos. ( ∆) Formation.

Prov. MS Channel Iron (75x40x6 mm) Length 2800 mm

MS Channel Iron (75x40x6 mm) Length 2800 mm for holding the 11kv G.O.Switch handle

G.O. Switch Handle Supporting (Channle Iron 75x40x6 mm) Length 460mm

Prov.GO AB Switch Unit (11kV, 400A, 25 KA )

Prov.D.O Fuse Unit

Prov.Nuts and Bolts of Various Sizes

Prov.MS Half Clamp (Provided By HPSEBL)

Prov.MS Full Clamp

Prov.Barbed Wire

Prov.Eye/Earth Hook

Prov.11kv Pin Insulator with pin complete in all respect

Discs insulator sets (comprising 1 No. Disc: ^^(Porcelain, BS, 12 kV, 90 kN) including Dead End Clamps etc.) (Provided By HPSEBL)

Prov.11kv Stay Set

Prov. Stay Wire (7/3.15 mm) (10 kg. per Stay Set)

Prov.11kv Earthing set complete in all respect.

Prov.Red Oxide (1.5 Ltr. Per Pole)

Prov.Alluminum Paint

Prov.11kv Danger Plate (250x200x1.6 mm)

SUPPLY PART

Supply PART 11/0.4kV,63 KVA Sub-Station

Distribution Transformer (Ordinary) 11/0.4 KV, 63KVA (Provided By HPSEBL)

Steel Tubular Poles (9 m, Working load>200Kgf/m2) (Provided By HPSEBL)

Muffs with concrete filling

X-Arm (Channel Iron (100X50X6mm) Length 2800mm X 2 No's) for incomer Line. Provided by HPSEBL

MS Angle Iron (50X50X5mm) Length 2800mm x1 No's for LA's .

X-Arm (Channel Iron (75X40X6mm) Length: ( 2800mm x 4 No's) for supporting DO fuse unit & GO switch (Provided By HPSEBL)

Transformer Belting & Knee Bracing

X-Arm: [Channel Iron (100x50x6 mm), Length : 2800 mm X 2 Nos] for Transformer Bed Provided by HPSEBL

X-Arm [Channel Iron (100x50x6 mm), Length : (460 mm) x 2 Nos for supporting Main Channel of Transformer]

MS Angle Iron (50X50x6 mm), Length : (2800 mm) x 2 Nos

MS Angle Iron (35X35x5 mm), Length : (460 ) x 2 Nos

MS Angle Iron (50X50x6 mm), Length : (950 mm) x 2 Nos for Bed Knee Bracing

Transformer LT Distribution Box and GO Switch fixing Assembly

MS Angle Iron (50X50x6 mm), Length: (2800 mm) x 2 Nos

MS Angle Iron (50X50x6 mm), Length: (450 mm) x 1 Nos

GO Switch Handle Supporting: [Channel Iron (75x40x6 mm), Length: 460 mm

GO AB Switch Unit (11kV, 400A, 25 KA) Tripple pole O/D type

D.O Fuse Unit

Surge Arrester, 9 kV Station Class (Porcelain Type)

Discs insulator sets (comprising 1 No. Disc: ^^(Porcelain, BS, 12 kV, 90 kN) including Dead End Clamps etc.) (Provided By HPSEBL)

Stay set complete

Stay Wire (7/3.15 mm) (7.0 kg per Stay Set)

Pipe Earthing Set

LT Distribution Panel Box with MCCB (40A, 25 kA, 4P) and SFU (16A, 4No, rewirable)

Half Clamp (M.S. Flat 50X6 mm)

Full Clamps (M.S. Flat 50X6 mm)

Nuts and Bolts of Various Sizes (Galvanised / Coated) [Preferably 16 mm Φ or more (with flat and spring washers)]

Aluminium Thimble

Thimble copper 200 amps

Danger Plate

Barbed Wire

LT Cable (3.5 Core) 70 mm²

Energy Meter (3-Phase, 4-Wire) DLMS compliant 50 A CT Type for 100KVA Transformer Provided by HPSEBL

Aluminium Paint.

Prov.Red Oxide (1.5 Ltr. Per Pole)

Please Enable Macros to View BoQ information