REPAIR/REPLACEMENT OF INTERNAL WIRING ALLIED WORKS OF OTM ACCN AT PH-II AREA

Taking down carefully point wiring for one light, socket or power etc incl all fittings such as switches sockets, holders, fan requlators etc and making good the disturbed surface of wall, ceiling etc including seperating serviceabel light fittings, switches etc and keeping in safe custody for reuse and removal of unserviceable materials from site complete all as specified and directed.

M & L for concealed point wiring complete with 1.5 sq mm FRLSH,PVC insulated multi stranded copper conductor single core cable 1100 volts grade (Red Colour use for Phase & Black Colour use for Neutral),drawn into and including non metalic PVC rigid conduit medium grade of suitable size and conduit accessories fixed on wall, floor, roof etc. and including provision of FRLSH,PVC insulated multi stranded copper conductor single core 1.5 sq mm conductor for earth continuity (Green Colour) and connected to common earth dolly and including pressed steel terminal flush boxes made out of 1.6 mm thick MS sheet suitable for modular switches concealed in wall and modular cover plate with frame for housing the switches socket,outlet etc.,all as specified and directed by Engineer-in-Charge for one light point controled by one one way 5/6 Amp switch. Note :- (i) Cost of PVC conduit, cutting chases of wall, making good disturbed wall surfaces including finishing with cement mortor 1:4, matching with existing colour/paint of surface and modular box, modular cover plate with frame are deemed to be included in the quoted rate. (ii) Length of point wiring up to 7.50 meter and to be measured from switches to ceiling rose or to the actual load.

All as per Item No 2.00 here-in- before but for one calling bell point controlled by one one way Bell switches.

All as per item No. 2.00 here-in-before but for 5 Amp socket on same board control by other switches.

All as per BOQ item No 2.00 here-in-before but for one power pointt using by 2.50 sq mm FRLSH,PVC insulated multi stranded copper conductor single core cable 1100 volts grade (Red Colour use for Phase & Black Colour use for Neutral), and with and including FRLSH,PVC insulated multi stranded copper conductor single core 2.50 sq mm conductor for earth continuity (Green Colour) , on independent board ( but Not below the switch board of light points in the same vertical plane).

All as per BOQ item No 2.00 here-in-before but for one power pointt using by 4.00 sq mm FRLSH,PVC insulated multi stranded copper conductor single core cable 1100 volts grade (Red Colour use for Phase & Black Colour use for Neutral), and with and including FRLSH,PVC insulated multi stranded copper conductor single core 4.00 sq mm conductor for earth continuity (Green Colour) , on independent board ( but Not below the switch board of light points in the same vertical plane).

Supply & Fixing switch modular type 6 Amp one way, one module, single phase, complete all as specified and directed. (Note : Item to be measured if executed under new point wiring)

S&F socket outlet 5 Amps, 5 pin, modular type, 2 module , single phase with shutter complete all as specified and as directed. (Note : Item to be measured if executed under new point wiring)

Supply & Fixing switch modular type 15/16 Amp one way, two module, single phase, complete all as specified and directed.(Note : Item to be measured if executed under new point wiring)

S&F socket outlet 15/16 Amps,6 pin, modular type, 2 module , single phase shutter typed complete all as specified and as directed. (Note : Item to be measured if executed under new point wiring)