Repair of flooring in Fist lab in Physics block

Amount

Dismantling tile work in floors and roofs laid in cement mortar including stacking of serviceable material including disposal of mulba outside the University Campus. For thickness of tiles 10 mm to 25 mm

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material outside university campus In cement mortar

Providing and laying in position cement concrete of specified grade including cost of centring and shuttering - All work upto plinth level 1:5:10 (1 Cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size)

Providing and laying 40 mm thick cement concrete Flooring 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size) for under flooring for tile work.

Providing and laying double charged vitrified floor tiles in 60 * 60 cm(thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 ( 1 Cement: 4 coarse sand) including grouting the joints with cement and matching pigments etc complete. ( Johnson/Kajaria/ RAK Make )

Removing dry or oil bound distemper by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete

Repair to plaster of thickness 12mm to 20 mm including cutting the patch & preparing & plastering the surface of the walls complete including disposal of rubbish outside the University Campus. With cement mortar 1:4 coarse sand. (Internal & External Plaster upto floor V level). Nothing extra shall be paid for scaffolding

Providing and Applying white cement based Putty of average thickness 1mm of approved brand & manufacture on wall surface to give an even finish

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade New work (two or more coats) over and including priming coat with cement primer

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade (two or more coat excluding priming coat)

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade (one or more coat on old surface)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :one or more coats

Brick work using 2nd class common burnt clay building bricks in foundation, plinth and in super structure in cement mortar 1:6 (1cement: 6coarse sand) including cost of scaffolding, formwork etc. complete (All work upto floor V level).

15mm thick cement plaster 1:4 (1cement: 4 sand) on ceiling/walls for (Interior/exterior plastering). All work upto floor V level.

Regarding terracing of mud phuska covered with tiles or bricks in cement by dismantling tiles or bricks, removing mud plaster, preparing the surface of mud phuska to proper slope relaying plaster gobri leaping & tiles or bricks, grouted in cement mortar 1:3 including replacing unserviceable tiles with new ones & disposal of unserviceable material to the dumping ground (the cost of the new tiles excluded) outside University Campus

Providing gola (Angular Fillet) 75 x75mm in cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : In 75x75mm deep chase

Making khurras 45x45cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20mm nominal size) over P.V.C. sheet 1mx 1mx400 micron, finished with 12mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement rounding the edges and making the finishing outlet complete.

Raking out joints in cement mortar and preparing the surface for repainting or replastering including disposal of rubbish outside the University Campus.

Flush pointing with cement mortar 1:3 (1 cement: 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement for flat tile bricks on top of mud phaska:With F.P.S. brick tiles

12mm thick one side prelaminated particle board (decorative lamination on one sides and other side balancing lamination) grade-1, medium density flat pressed three layer particle board FPT-1 like or graded wood particle board FPT-1 conforming to IS : 3087 bondedwith BWP type synthetic resin adhesive as per IS : 848 and prelamination conforming to IS: 12823 Grade-1, Type II marked.

Renewing glass panes, with existing wooden fillets.Float Glass panes of Thickness 4mm (weighing 10 Kg/Sqm)

Supply of Labour for different works Mason

--------------do--------------- 2nd Class Carpenter

-------------do---------------- Mazdoor

ANIL KUMAR PURI

Rattan Chand

KRANTI LAL KHAJURIA