Karnataka

AOC

Works

Buildings

Janthagalli Govt. Lower Primary School(GF) and Varuna Govt. High School(GF & FF) Mysuru Taluk, Mysuru District, Karnataka under CSR scheme

Karnataka Power Corporation Limited

KPCL Executive Engineer CIVIL Office SHIVA PROJECT ShivanaSamudra | Karnataka

Amount: ₹35.3 LCloses: 23 Jul 2026Closed

Timeline

Published8 Jul 2026
Closed23 Jul 2026
Awarded—

Bids

1 Bid23 Jul 2026

#	Company	Amount	Status
1	SANTHOSH KUMAR M ₹29.3 Laccepted-aoc	₹29.3 L	accepted-aoc

Tender Value

₹35.3 L

EMD Value

₹70,700

Closing Date

23 Jul 2026, 11:00 pmClosed

Tender Inviting Authority

Office Inviting Bids

Karnataka Power Corporation Limited

Contact Person

Ramesh T N

Mobile Number

8310609337

Work Description

Janthagalli Govt. Lower Primary School(GF) and Varuna Govt. High School(GF&FF) Mysuru Taluk, Mysuru District, Karnataka under CSR scheme

Tender Information

Tender ID

KPCL/2026-27/BD/WORK_INDENT4361

Reference Number

KPCL/2026-27/BD/WORK_INDENT4361

Tender Type

Open

Product Category

Buildings

Form of Contract

Two Tender Document System(Two Cover)

Location

KPCL Executive Engineer CIVIL Office SHIVA PROJECT ShivanaSamudra

Source Website

Subscribe to view

Documents Required

8 documents required · 8 mandatory

Technical Bid

RequiredAnnual Turnover Certificate

RequiredWork done certificate

RequiredIncome tax PAN

RequiredIndependent PF code

RequiredKPWD contractor registration certificate

RequiredGST registration certificate

RequiredDeclarations as per annexure-A of bid document

RequiredThe statements showing the value of existing commitments and on-going works as well as the stipulated period of completion remaining for each of the works listed should be countersigned by the Employer in charge, not below the rank of an Executive Engineer or equivalent.

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by any State Government/Government of India/Union Territory

The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of KPP portal due to internet connectivity issues and technical glitches at bidders end.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

Bidder shall pay Contract Management Module processing fees as per e-portal.

The tender is of two cover system.

The original documents should be produced for verification at any stage of tender process as and when sought for, failing which, the bids are liable for disqualification.

Rates shall be quoted in Tender Schedule-B (Financial Bid) in the website itself.

For those tenderers whose Technical bids satisfy the eligibility criteria and who has furnished all the necessary documents, only their financial Bids will be opened.

The tender document is part and parcel of the agreement.

Conditional tenders will not be accepted.

KPCL reserves the right to verify any information/documents furnished by the tenderer should the circumstances so warrant. In case the information or the documents furnished are found to be incorrect/false or invalid then the EMD furnished by such tenderer shall be forfeited.

Right to reject any or all the tenders without assigning any reasons rests with the accepting authority.

The successful bidders shall give an undertaking that they would abide by the provisions of the Employees Provident Fund Act.

The contractor shall obtain insurance coverage for all the workers working in this area.

The rates quoted by the Bidder shall be exclusive of GST but inclusive of all applicable taxes, levies, duties and cess, building welfare cess (if applicable) etc., as per latest GOK and Government of India prevailing as on the date of NIT.

The Bidder shall quote his rates inclusive of PF as per the applicable rates as issued by the PF Department from time to time.

The bidder should take into account the prevailing royalty charges while quoting their rates and submit the Material Dispatch Permit (MDP) receipt, if not submitted penalty shall be charged as per the joint secretary, Energy Department letter no. Energy26 PPT 2022 dtd:26.04.2022

KPCL shall recover the Income tax etc., at the prevailing applicable rates.

The successful bidder should strictly adhere & ensure the minimum wages Act to the labours prevailing as per the Govt. rules & regulations. The bidder should maintain register of labour deployed and wages paid for the workers and shall produce the documents whenever called for by the competent authority and remittance towards PF shall commensurate with the labour component for the work involved.

Contractor should have independents PF Code. The Contractor shall remit PF of labourers to contractors permanent PF code Number only and Not to the KPCL PF Sub - Code.

In case the dates notified above are declared as holiday, the immediate next working day shall be reckoned.

If the contractor makes any alterations in the conditions of the contract or puts any condition of his own, such tenders are liable for rejection.

Further details of the work or any clarifications can be obtained from the Office of the Executive Engineer (Civil), KPC Ltd., Shivasamudram, Malavalli Taluk, Mandya District-571430, during office hours. Mobile-918310609337.

The tender Notification along with Blank Tender Form will be accessible in the KPP portal website (www.kppp.karnataka.gov.in).

Aspiring Bidders/Contractors who have not obtained the user ID and Password for participating in KPP portal in Karnataka Power Corporation Limited may now obtain the same from the website www.kppp.karnataka.gov.in.

Corrigendum/modification/corrections, if any, will be published in the website only.

In case the agency fails to execute the work properly, engineer may entrust the work to the other agency at the cost and risk of original agency.

The tender shall be valid for 180 days from the Last date of submission of bid.

Contract Performance Guarantee: The successful bidder has to furnish a e Bank Guarantee from a banks integrated by NeSL with KPPP towards Contract Performance Guarantee (CPG), for an amount equivalent to 5% of the contract value plus additional performance security for unbalanced tender with an appropriate validity period (i.e. Validity period for CPG is the Contract period & maintenance period i.e., 24 Months. Validity period for Additional performance security is till completion of work) within 20 days from the date of issue of Work Order (WO) to the successful bidder. The e Bank Guarantee (eBG) shall be furnished. The total contract period is 24 Months (including monsoon period) The Security deposit for the tender shall be valid till contract period plus Additional performance security for unbalanced tender shall be valid till completion of work.

The statements showing the value of existing commitments and on-going works as well as the stipulated period of completion remaining for each of the works listed should be countersigned by the Employer in charge, not below the rank of an Executive Engineer or equivalent. Self-declarations by bidder, any false information provided by the bidder will be evaluated seriously and bid will be rejected.

Technical Criteria

Past Experience

The intending bidder should have satisfactorily completed as a prime contractor at least one Similar nature of work of value not less than Rs. 17.67 Lakhs in the preceding Five financial years (ie., 2021-22, 2022-23, 2023-24, 2024-25 and 2025-26). The certificate issued by the Competent Authority not below the rank of Chief Engineer in case of KPCL works and not below the rank of Executive Engineer and equivalent in case of other Government Organizations is to be uploaded in the Technical bid. (Work done of previous years shall be given weightage of 10% per year to bring them to the present price level of financial year 2026-27).

Work Done Certificate

Capabilities of Vendor

Tender capacity: (A x N x 2.5 - B), where A - Maximum value of Civil Engineering works executed in any one year during the last five years (updated to 2026-27 price level) taking into account the completed as well as works in progress. N - Number of years prescribed for completion of the works for which Tenders are invited. B - Value at 2026-27 price level of existing commitments and on-going works to be completed during the next 08 months.

Others -- FORMAT for EXISTING COMMITMENTS and ONGOING WORKS

Financial Status

The Intending bidder in his name should have achieved in at least two financial years an average annual Financial Turnover of value not less than Rs. 35.33 Lakhs during the preceding five completed financial years (ie., 2021-22, 2022-23, 2023-24, 2024-25 and 2025-26). The bidder shall submit the certified copy of Turnover certificate along with Profit & loss statement duly certified by the chartered Accountant along with UDIN for the respective two years & the same shall be uploaded along with the technical bid. (Financial turnover of previous years shall be given weightage of 10% per year to bring them to the present price level of financial year 2026-27).

Audited CA Certificate of Annual Turnover

Others

Income tax PAN

ITR Filed Copy (Mentioning PAN)

KPWD contractor registration certificate of Class III & above

PWD Registration Certificate (Class I/II/III/IV)

Independent PF code

Valid EPF Certificate

Valid GST registration certificate

GST Registration

Declarations as per Annexure A & B of bid document

Others -- Declarations

Not applicable

Others -- Not applicable

Not applicable

Others -- Not applicable

Not applicable

Others -- Not applicable

Not applicable

Others -- Not applicable

Not applicable

Others -- Not applicable

Work Locations

Fee & Financial Details

Tender Fee Amount

₹890

EMD Fee Amount

₹70,700

Important Dates

Last Activity

23 Jul 2026

Published

8 Jul 2026

Bid Opening

25 Jul 2026

Download Ends

20 Jul 2026

BOQ Preview

•

Janthagalli Govt. Lower Primary School(GF) and Varuna Govt. High School(GF & FF) Mysuru Taluk, Mysuru District, Karnataka under CSR scheme

•

Earth work in surface excavation for stripping, seating of bund, Road way, by manual means for lowering & leveling the ground for all works other than foundation & depth in all kinds of soil not excee...

•

Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per dr...

•

Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, to...

•

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

•

Providing and laying in position Cement Concrete for all Foundation works.The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super...

•

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...

•

Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)

•

Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fine agg...

•

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...

•

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

•

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS21...

•

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...

•

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openi...

•

Providing Salwood frames of doors, windows, clerestory windows,ventilators and other frames, wrought, framed or assembled including making plaster grooves (excluding cost of cement concrete and side c...

•

Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size grani...

•

Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround doo...

•

Providing & fixing of 2.5 track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elasto...

•

Providing and fixing suitable plaster mesh 150mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for ...

•

Providing lath plaster with cement mortar 1:3, 5cms thick with 6mm dia mild steel bars at 20 cms. c to c both horizontally and vertically fixed with chicken mesh for drop chajja,facia, backing to cup ...

•

Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including corners wherever required smooth rendering, providing and removing scaffolding,in...

•

Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including corners wherever required smooth rendering, providing and removing scaffoldin...

•

Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1...

•

Providing wall black boards in 12mm thick with CM 1:3 and applied with primer & two coats of acrylic emulsion black paint including finishing etc.,complete Ground Floor

•

Providing wall black boards in 12mm thick with CM 1:3 and applied with primer & two coats of acrylic emulsion black paint including finishing etc.,complete First Floor

•

Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of the ...

•

Providing and laying Polished Glazed Vitrified tiles with thickness 10 mm in floor with different sizes with water absorption less than 0.08%and conforming to IS:15622, of approved brand & manufacture...

•

Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with whitecement slurry over existing rough plaster surface using glazed ti...

•

Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer....

•

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...

•

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With water thinnable cement primer on wall surface having VOC content less tha...

•

Wall painting with premium acrylic emulsion paint of interior grade,having VOC (Volatile Organic Compound ) content less than 50 g/L of approved brand and manufacture, including applying additional co...

•

Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint ...

•

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With ready mixed pink or grey primer on wood work (hard and soft wood) having ...

•

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @ 0.80 L/10 m² of approved brand and manufacture includ...

•

Lettering with black Japan paint of approved brand and manufacture to give an even shade including preparing the surface after thoroughly cleaning the surface to remove all dirt, dust and foreign matt...

•

Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied ...

•

Providing and fixing bright finished brass butt hinges with necessary screws etc. complete : 125x85x5.5 mm (heavy type)

•

Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge : SS Tower Bolts 250x10mm

•

Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge :SS Handles 200mm

•

Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge :SS Handles 300mm

•

Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge :SS Door stopper 75mm

•

Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge SS Aldrop 16mm dia, 300mm

•

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal exp...

•

Concealed Conduit system Supplying heavy gauge PVC conduit pipe 25mm dia 2mm thick confirming to IS2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc.,and running before concr...

•

Supplying heavy gauge PVC Conduit Pipe 25dia 2 mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement ...

•

Supplying and fixing PVC/metal conduit Deep junction box 25 mm deep Junction box

•

Supplying and flush mounting powder coated/ galvanized metal box suitable for mounting modular switch plates.The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall. 1-...

•

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6A One Way Switch

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. Stepped Fan Regulator Two Module

•

Supplying and Fixing Metal Fan Box with Round Hook.

•

Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm2 (Earth wire) FRLS multi st...

•

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100Vgrade, multi strand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

•

Supplying of .feet PVC Batten with integrated LED tube.W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI greater than 80. Power Input: 220-240V@50/60Hz & P...

•

Fixing all types and all capacities of 1'x4' / 2'x2' LED Light fittings indoor on the wall / ceiling / rafters / girders with necessary supporting frame, using 2310.0076" twin twisted PVC insulated wi...

•

Supplying of Ceiling Fan with Capacitor rating As per guideline of BEE 5 star rating and IS:374/79 and also comply with IS: 1709/1984 with latest amendment, Rated voltage 220 V/50 Hz, Rated power inpu...

•

Fixing a ceiling /wall mounting fan of all capacities and all types, to the existing S hook with fan regulator to the existing board together with supplying and fixing5A. ceiling rose, necessary lengt...

•

Supplying and fixing regular MCB distribution boards on wall/woodboard/ flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/ 3ph...

•

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' cure, indicator ON/OFF, energy cross-3 with Short circuit breaking cappacit...

•

Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5m long buried in a pit . The pit shoul...

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

Bid Doc - CSR Mysuru_Tender cap.docx

Tender Document • 2.89 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].