Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹38.6 LAccepted-AOC | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹43.8 L+₹5.0 L (12.8%)Rejected-Finance 02 JAMEEWAR COMPLEX RING ROAD HANUMAN NAGAR GONDIA MAHARASHTRA 441614 | GONDIA | MAHARASHTRA | 441614 | L2 | Rejected-Finance Other than Lowest Bidder | |
| 3 | L3₹43.9 L+₹5.0 L (12.9%)Rejected-Finance 86 MAHEWA EAST NAINI PRAYAGRAJ U P | PRAYAGRAJ | PRAYAGRAJ | UTTAR PRADESH | 211008 | L3 | Rejected-Finance Other than Lowest Bidder | |
| 4 | L4₹43.9 L+₹5.0 L (13.0%)Rejected-Finance HIG 40 TYPE B DEV PRAYAGAM ADA COLONY JHALWA PRAYAGRAJ U P 211015 | PRAYAGRAJ | PRAYAGRAJ | UTTAR PRADESH | 211015 | L4 | Rejected-Finance Other than Lowest Bidder | |
| 5 | L5₹44.0 L+₹5.2 L (13.3%)Rejected-Finance 41B 1H JAYANTIPUR PREETAM NAGAR ALLAHABAD | L5 | Rejected-Finance Other than Lowest Bidder |
Tender Value
₹49.7 L
EMD Value
₹99,400
Closing Date
10 Jan 2023, 2:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) Bamrauli
GE (AF) Bamrauli
ADDITION / ALTERATION AND RENOVATION OF AIRMEN MESS AT 820 SU AND OTHR SANCTION WORKS UNDER GE (AF) BAMRAULI
2022_MES_568940_2
8758/E8
Open Tender
Civil Works
Works
180 days
GE (AF) Bamrauli
Please refer Tender documents.
6 documents required · 6 mandatory
₹500
GE (AF) Bamrauli
₹99,400
Yes
27 Jan 2023
4 Jan 2023
11 Jan 2023
4 Jan 2023
10 Jan 2023
4 Jan 2023
Amount
Demolition of cement concrete (un-reinforced) in ground floors and pavings not exceeding 15cm thickness (below and above ground level) and removing the unserviceable materials to a distance not exceeding 100m all as specified and as directed.
M & L for 25mm thick PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in leveling course to floor complete all as specified and directed.
M&L for Machine cut Kota stone 550X550 slab flooring 20 - 25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, screed bed or bedding layer of mortar 20 mm thick for laying floor finished in CM 1:4.complete all as specified and directed.
M&L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with ditto as complete all as specified and directed.
M&L for Preparation of existing kota stone rubbing and polishing, complete all as specified and directed.
Dismantling of floor,hearth or wall tiling includinguding cement mortar bedding but not backing and rubbish off the premises.
M&L for Non skid ceramic jointless coloured tiles 7 to 8mm thick (square/ rectangular) area of each tiles exceeding 0.18 sqm but not exc 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed with white as coloured cement to match the shade of tile laid over and including 15mm thick screed bed in cement mortor (1:6) complete all as specified and directed.
M&L for glazed ceramic tiles in vertical surfaces of size 450x300x7-8mm thick set and jointed in neat cement slurry and pointed with white or coloured cement to match the shade of tile fixed over and including rendering 10 mm thick in cement mortor (1:4) on vertical surface as in backing coat all as specified and directed.
M&L for Non skid ceramic jointless coloured tiles 7 to 8mm thick (square/ rectangular) area of each tiles exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed with white as coloured cement to match the shade of tile over and including 15mm thick screed bed in cement mortor (1:6) complete all as specified and directed.
Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out all as sfd and directed.
Excavation not exceeding 1.5 m deep and getting out hard and dense soil as per specifications and drawing all as sfd and directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm. all as specified and directed.
Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m. all as specified and directed.
M&L for Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface all as sfd and directed.
M&L for PCC 1:4:8 type D2 using graded stone aggregate cement concrete in foundations, filling and mass concrete all as sfd and directed.
M&L for brickwork with sub class 'B' bricks, straight or curved on plan exc 6m mean radius built in CM 1:6, complete all as specified and directed.
S&F Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as sfd and directed.
S&F Mild steel TMT bars 6 to 8mm dia and over, cut to length, bent to shape required, includingcranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as sfd and directed.
M&L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) all as specified and directed.
M&L for Formwork to sides and soffits of floor or roof beams, beam haunch ings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc.
M&L for Formwork to edges of concrete flats, breaks in floors, openings in concrete walls, floors and roofs and sides of RCC/PCC bands in walls, horizontal or sloping, and similar work all exceeding 20cm wide.
M&L for RCC M-25 as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like all as specified and directed.
M&L for RCC M-25 20mm graded stone aggregate Beams, cantilevers, bressummers, lintels over 1.5m span all as specified and directed.
M&L for rendering 5mm thick in CM 1:3 finish even and smooth without using extra cement in ceiling complete all specified and directed.
M&L for preparation of new plastered ceiling surface and applying three coat of white wash of ceiling all as specified and directed.
M&L for rendering 15mm thick on faces of brick work or concrete surfaces finished even and smooth without using extra cement in CM 1:4, all as specified and directed.
M&L for preparation of new plastered surface cement base paint two coat for new plaster surface over one coat primer of wall complete all as specified and directed.
M&L for 15mm thick rendering in CM 1:6 on fair faces of brick work, surfaces finished even and fair without using extra cement complete all as specified and directed
M&L for preparation of new plastered surface and applying three coat of white wash of wall all as specified and directed
S&F Steel windows or ventilators, fixed type, with glazing bars all as specified and directed.
M & L for pressed steel frames of size 165 x 60 mm for doors with one or more rebates including necessary fixing lungs,hinges,lock strike plate etc complete, as specified.
M & L for PCC 1:3:6 type C-0 using 12.5 mm granted stone aggregate as hold fast/filling in pressed steel frame
Excavation in post holes (or similar holes) each n. exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around. In layers n. exc 25cm, for hard/ dense soil.
S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensil strength of 550 Mpa as in roof covering to wall fixed with self tapping screws as specified.
S&F steel work in tubular including special shaped washer etc. complete using ERW or induction butt welded yubes conforming to I.S 1161-1979 St grade St-240
S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. Confirming to Fe-410- W(GdeE-250) quality-B etc complete all as specified and directed.
S&F plate girder or single stanchions, built up of one beam or channel section with flange plates, caps, bases splices angle brackets cleats and other connections
M&L for PCC 1:2:4 type B-2 (Using 40mm graded stone aggregate) as fdn filling and mass concrete for post holes.
M&L for Preparation of new surfaces of steel of any description over 10cm grith or width, not otherwise described with one coat of red oxide followed by two coats of synthetic enamel paint.
M&L for Preparation of old surfaces of steel one coats of synthetic enamelled paint over a coat of red oxide on steel surfaces over 10 cm width or girth over new/old steel surfaces etc, complete all as sfd and directed.
Taking down chowkhat or frame with shutters (without taking of shutters from the frame) N. exe 1.5 sqm each any type of wooden /door (wooden , aluminium & Steel etc)
S&F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded all as specified and directed
S&F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded all as specified and directed
S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E- 165 all as specified and directed
Hacking out old broken glass (any thickness, size, quality or description) from wooden frames, glazed with putty or fixed with beads complete all as specified and as directed.
S&F Sheet glass 3mm , ordinary quality and glazing with oil putty in square n exc 0.5sq. m in each pane all as specified and directed
S&F Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.00mm and fixed with tinned tacks, or galvanised wire staples all as specified and directed
S&F in repair Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.00mm and fixed with tinned tacks, or galvanised wire staples all as specified and directed
S&F in position premium sand textured finished mineral fibre acoustical ceiling tiles of size 600x600x16mm thick and placed on GI grid powder coated snap grid ceiling 600x600 module consisting of wall angle section19x19 mm and tee section with web height of 38mm and flange 15mm (colour white) (having rotary stitching on all T Section) with suspension system as shown in sketch 'B' and as approved by GE Note : (i) Ceiling tiles shall be of make Armstrong brand "DUNE RH99 (Bevelled/Tegular) or equivalent brand of make as specified in Appendix 'B' to particular. (ii) Thickness og GI section shall not less be less than 3mm and shall be procured from the tile manufacturer. (iii) Section and hanging system shall have galvanising of minimum 90 grams per sqm and same make of tile. (iv) Work shall be executed by manufacturer's authorised vendor.
S&F Waste fitting brass chromimum plated 32mm dia, for wash hand basins etc with long screw shanks & fly nuts, plain end, bedded in red lead cement and other end fixed all as specified and directed.
S&F in repair 32 mm dia PVC waste pipe 90 cm long fexible type for Wash basin/urinal all as specified and directed.
Demolition of plain cement concrete in any position including roof padding/ lime concrete/ mud phuska,Tar felt or HP tiles in cement mortar bedding etc complete all as specified and directed.
M&L for rendering 10mm thick rendering in CM 1:4 over concrete surfaces of roof mixed 5% liquid water proofing compound by weight of cement or as per manufacturers instruction including surfaces finished even and fair without using extra cement complete all as spd and directed. note: Liquid water proofing compound paid seperately.
M&L for Liquid water proofing compound
M&L for Provision of Roof treatment consisting of the following items and operations :-(a) Cleaning the roof surface from dust / dirt and any other foreign materials and applying a coat of bituminious primer @ 0.30 liters per square meter uniformily after the surfaces fully dried complete all as specified and directed.(b) M&L for applying a coat of hot blown bitumen grade 85/25 conforming to IS 702 over primed surface of roof slab @ 1.20 Kg/Sqm complete all as specified and directed. (c) M&L for APP based polymeric water proofing membrane minimum weight 3.6 Kg / Sqm and minimum 3mm thick reinforced with polyster non wove fabric (weight not less than 150 gms/Sqm or as per IS), laid over hot bitumen surface by torched application with the strict supervision of manufacturers technical supervisor including cutting & chasing 100mm x 75mm in the parapet to insert the APP membrane and sealed with and including PCC (1:2:4) type B-0 (Mixed with and including polymer based liquid water proofing additive @ 5% by weight of cement or as per manufacturer’s specification). Membrane shall be laid with 100mm side/end lap on prepared surfaces as per manufacturer instruction work shall be carried out strictly with the technical tradesmen and supervision of technical staff of manufacturer.
M&L for Cement concrete tiles 20cm x 20cm x 20mm thick with grey cement no pigment and 20mm thick screed (1:6) cement mortar complete all as specified and directed.
Taking down chowkhat or frame with shutters (without taking of shutters from the frame) exe 1.5 sqm each but n. exc 4 sqm each any type of door (wooden , aluminium & Steel etc)
M&L for Flush shutters 30mm thick, solid core construction, with block board core & plywood face panels, commercial type on both sides
M&L for Glazed and skeleton shutters, open rebated and prepared to receive glass, gauz e, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats
S&F Aluminium, anodised barrel tower bolts of extruded section and fixed for 200 mm length
S&F 300mm Aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded section & fixing blots & sliding bolts of extruded section or cast aluminium alloy & fixed
S&F 100mm Butt hinges, medium weight, cold rolled mild steel, and fixed
S&F Aluminium handles, 150mm fabricated type anodised
S&F in repair 18mm thick celuka PVC sheet minimum 600 Kg/Sqm density grade 1 quality of both side plain white colour rigidiam glossy finish fixed with screws, solvent cement/adhesive as per manufacturer instruction to make cabinet sides top and bottom and shelves inside the cabinet includinguding fitting complete ( Each cup board having -04 No's Aluminium Box Hinge, Handle-2 Nos, Hasp & staple-1 No) etc as per specification and includinguding complete fittings all as specified and directed by the Engineer-in-charge.
Supply and fix drapery rod 19 mm inner dia ( thickness not les than 1.6mm) stainless steel fancy type bracket fixed with rawl plug or screw on walls/beam and shall be provided with fancy finial at ends all as specified and directed by engineer-in-charge.
Supply and fix curtain brackets mild steel with matching with the curtain rod complete all as specified and directed
S&F MS flat iron as in hold fast etc and similar work.
M&L for Preparing surfaces of any description not otherwise described over 10 cm width or girth of new or previously untreated wooden surfaces and applying two coats of synthetic enamel paint over a coat of pink primer
M & L for cement concrete type C-1, 1:3:6 ( using 20mm graded stone aggregate), 50 mm thick , in plinth protection laid in bays not exceeding 2 Sqm each and finishing even and fair on top without using extra cement with 6mm wide joints throughout the thickness of plinth protection in concrete bays all as specifed and directed.
M&L for Preparation of old plaster surface of wall applying one coats of Appx exterior emulsion paint on wall surfaces complete all as specified and directed.
M&L for Preparation of old internal surface by washing, rubbing down and applying one coat of white wash on wall surfaces all as specified and directed.
M&L for Preparation of old surface by washing, rubbing down and applying one coat of white wash on ceiling surfaces all as specified and directed.
M&L for complete removal of existing treatment of wall, preparation of old surface by washing, rubbing down and stopping of distemper and painted surface and applying two coat oil bound emulsion on wall surfaces white or tinted
M&L for complete removal of existing treatment of wall and applying two coats of cement base paint over a coat primer complete all as specified and directed.
S&F in repairs PVC valve less, syphonic action type, white low level flushing cistern of capacity 10 litre with inlet ball valve float and handle including brackets and 32 mm dia PVC flush pipe complete all as specified and directed
S&F Towel Rail 600mm long of aluminium fixed with and including chromium plated brass screws and wooden / plastic cleats (minimum weight 270 gms) as in repairs complete all as specified and as directed.
Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories).
S & F of 110 mm dia(SWR) pipes single socketed, in any length with rubber ring joints fixed to walls complete all as specified and directed
S&F PVC connections 15mm size with PTMT nuts of length 450mm as in repairs complete all as specified and as directed.
S&F in repair 15 mm Bib tap long body with wall flange fancy type chromium plated brass screwd for iron pipe with capstain head complete all as specified and directed
S&F Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe of bore of pipe 15mm fixed as in repairs all as specified and as directed.
Dismantling water tanks 500 ltr all as specified and directed
S & F 500 litres capacity rotational moulded polyethylene water storage tanks triple layer,white colour (Cylindrical vertical with closed top) hoisted and fixed in position including dismantling all as specified in SSR Part I complete all as specified and directed
S&F 20 mm dia Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed all as specified and directed.
Taking up or down 15 mm dia steel tubing and connections including cleaning for refixing or removal to store complete all as specified and directed.
Supply and fixing 15 mm bore galvanised steel water tubing 'medium grade' with all fittings and fixed to walls, ceiling or laid in floors etc. complete all as specified and directed.
M & L for chequered cement concrete with tiles of size 20cm x20cm x 25 mm 15MM thick screed bed in CM 1:6 set jointed and pointed in neat cement slurry and pointed with coloured cement to match.
M&L for 100mm thck Cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in Sub base flooring/mass concrete/foundation or floor complete all as specified and directed
M&L for 75mm thick for PCC 1:3:6 type C-1 as in plinth protection , complete all as specified and directed
M&L for Granite (of any type) slab 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shede of granite stone including and polishing screed bed or bedding layer of mortar 15 mm thick for laying floor finished in CM 1:6. complete.
Taking down chowkats or fromes exc 1.5sqm but not exc 4 sqm each (with taking off shutters from the frame) & removing from site complete all as specified and directed
S&F powder coated for aluminium anodized sliding door of partly paneled and partly glazed with 5.5mm thick plain sheet glass of ordanary quality and 12mm thick particle board of interior grade both side laminated and aluminium section weight not less than 0.55 kg/RM with and including self closing hydraulic door closer & floor srping etc with all fittings complete all as specified and directed.
M&L for aluminium window (Powder coated ) three track with anodized aluminium frame sliding/openable including wheel powder coated of section 62.5x37x2.5 mm thick shutter with bottom & middle rail of section 112.5x37x2.5mm and style & top rail of section 83x37x2.5mm thick with centrally locking arrangement with lock rail of rebate including joints cleat fixing of builders hardware fittings necessary and gazing with 5.0mm thick ordinary plain glass including wire mesh shutter necessary fittings fixuters & aluminium snap beads complete. Notes : (i) Glass filling in panels to windows shall be measured and paid for separately under respective item of this schedule as supply only (ii) Thickness of powder (epoxy polyster) coating shall not be less than 50 micron (iii) Shade/tint of powder coating (epoxy polyster) shall be as approved by GE. (iv) Frame shall be measured under respective item of this schedule.” (v) Stainless steel wire cloth measured and paid for separately under respective item of this schedule.
Supply 5.50 mm thick tint glass/pin head type for aluminium ventilators / window etc. complete, all as specified and directed
M & L for pressed steel frames for doors with one or more rebates including necessary fixing lungs,hinges,lock strike plate etc complete, as specified supplied & fixed (125 x 60mm)
M&L for cutting holes in brick walls built in cm for inserting hold fasts and making good dismantled portation in cm (1:3) or PCC (1:2:4 ) type B-1, exc half brick but n exc. One brick etc complete.
S&F MS works as of angles or tees,fixed independently cut to shape drilled incl. bending and welding angles of grade 410-FE including Dismantling all as specified and directed
S&F 110 mm bore PVC (SWR) bends any radius complete all as specified and directed
S&F 75 mm bore PVC (SWR) bends any radius complete all as specified and directed
S & F in repair 75 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls complete all as specified and directed.
S & F in repair 110 mm dia(SWR) pipes single socketed, in any length with rubber ring joints fixed to walls complete all as specified and directed.
S&F PTMT grating doom 100mm dia including removing the old grating (minimum weight- 25 gms)
S & F in repairs 75MM PVC Nahani trap, setting and jointing with solvent cement and fixed in Cement concrete type B-1 (1:2:4) complete all as specified and directed
S&F Health faucet, brass, chromium plated with pipe length 1200mm, washers, connections etc., complete all as specified and as directed.
Taking up or down 20 mm dia steel tubing and connections including cleaning for refixing or removal to store complete all as specified and directed.
Supply and fixing 20 mm bore galvanised steel water tubing 'medium grade' with all fittings and fixed to walls, ceiling or laid in floors etc. complete all as specified and directed.
M&L for Cutting chases brick walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends and making good cutting exceeding 20cm girth for concealed water tubing or concealed conduit wiring, etc.complete all as specified and directed.
S&F in repair Stop valves, fancy type, chromium plated with long shank and cup (concealed type) cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of bore of pipe 15mm as in repairs complete all as specified and as directed.
S&F in repair brass Chromium plated shower rose 125mm size with or without swivel joints, including fixing to steel pipe or union complete all as specified and directed.
S & F steel plate rack of size 900mm x 600mm x 200mm of best quality made out of 1.00 mm thick sheet complete all as specified and directed(Anjali/Blue Star).
S&F sinks made of stainless steel 1.0 mm thick kitchen with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or includingfixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mmcomplete all as specified and as directed.
S&F sink with drainage board made of stainless steel 1mm thick for kitchen with plugs, washer and waste in repairs including in cement mortar to dwarf wall or including fixing cantilever brackets and connection union to pipe overall size 915mmx460mm bowl size 410mmX330mmX160mm.complete all as specified and as directed.
M&L for Pre-cast cement concrete type B-1 (1:2:4) (using 20mm graded aggregate) as in manhole cover slabs set in cement mortar 1:6 including necessary formwork complete all as specified and directed.
Demolition of cement concrete (un-reinforced) in ground floors and pavings not exceeding 15cm thickness (below and above ground level) and removing the unserviceable materials to a distance not exceeding 100m all as specified and as directed.
M&L for 40mm thick Cement concrete type B-1, 1:2:4 (20mm graded aggregate) with 1.20 x 1.20 mtr panel joints all as specified and directed.
S&F Aluminium dividing strips, 1.5mm thick, inserted in position, conform to design 38mm deep all as specified and directed.
Taking down cement plaster on brick or stone walls, etc, incl raking out joints, hacking for key, scrubbing down with water, etc & prepare to receive new plaster complete all as specified and directed
M&L for Preparation of old decorated plastered or unplastered wall surfaces and applying one coat of cement base paint on wall surfaces
M&L for Preparation of old plastered surface of ceiling and applying three coats of white wash.
M&L for Preparation of new plastered surface of wall and applying two coats of oil bound distemper over a coat of primer birla white care Putty on wall obtain smooth finish etc including balance area complete removal.
M&L for complete removing of existing treatment on wall surface and applying two coat of OBD birla white care Putty on wall obtain smooth finish etc complete all as specified and directed.
Demolition cement concrete of depth not exc 1.0 mtr with manaual / mechanical concrete breaker and removing the debries out side MOD land all as specified and directed
Excavating in trenches soft/loose soil n.exc 1.5M wide and n.exc 1.5M in depth, for foundation etc or shafts, wells, cesspits, manholes, pier holes etc getting out etc complete all as specified and directed.
M&L for 25 mm thick damp proof course in cement concrete in 1:2:4 to horizontal or vertical surfaces including necessary formwork complete all as specified
M&L for brick work with sub class 'B' bricks, straight or curved on plan exc 6M mean radius, built in cement mortar 1:4 (half brick wall) etc complete all as specified and directed.
M & L for PCC 1:2:4 using 12. 5 mm graded aggregates as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, complete all as specified.
M&L for Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates etc(Fe 410-W(Gde E-250) quality-A ) etc complete all as specified and directed.
M&L for light shade Ceramic digital coloured tiles (Premium quality)10 mm thick (square/ rectagular) polished,area of each tiles not exceeding 0.36 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including 15mm thick screed bed layer in CM (1:6) complete all as specified and directed.
S & F solid PVC door frame of size 50mm x 47mm made out of 5mm single side prelam PVC sheet & edges will be painted to match with prelam sheet, reinforced with M.S. square tube and fixing in opening as per specification & drawing complete all as specified and as directed by the Engineer-in-Charge
S & F Factory made solid panel pvc door shutter 30 mm thick (style) consisting of frame made out of M. S. tubes for top & bottom rails. M. S. frame shall be covered with heat moulded plain colour PVC `C` channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M. S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supply & fixing in the frame at site as per specification & drawing complete all as specified and as directed by the Engineer-in-Charge.
S&F Vitreous china wash down water closet pan (one piece type) ivory with PVC sheet cover & flushing cistern, flushing pipe), including making good the floor with adjacent floor finishing and making connection to flush pipe etc complete including making functional and removal rubbish/waste materials to a distance n. exc 50m, complete all as specified and directed. Make of WC : ( Jaguar, Hindware, CERA, Parry ware)
S&F 15 mm bore Angular Stop cock with wall flange (CAT NO OPP-15053PM) screwed down, high pressure both ends for iron pipe or for unions and fixed complete all as specified and directed. (Make Hindware/Jaquar).
S&F 600 mm long Stainless steel towel rail Cat No ACN 111SN all as specified and directed. Make Jaguar.
S&F Stainless steel toilet paper holder with flap Cat No ACN 1153S all as specified and directed. Make Jaguar.
S&F Soap dispensor with glass bottle Cat No ACN 1135N all as specified and directed. Make Jaguar.
S&F 600 long glass shelf Cat No ACN1171N etc complete all as specified and directed. (Make Jaquar).
S&F 8 mm dia health faucet ABS SS Braided Hose 1.2 m long flexible tube & wall hook Cat No ALD -573 etc complete all as specified. (Make:Jaquar).
S&F CP connection 600 mm long braded hose with MIOXI nipple, 15 mm nut , O ring and rubber washer for 15 mm bore of pipe all as specified and directed.(Make : Jaquar Cat No ALD 801B).
S&F Looking mirror of 5mm thick glass including hanging arrangements and provision to receive LED back lights to give glow and decent look from out side complete.( LED lights measured and paid seperately in E/M schedule)
S&F 75 mm dia PVC (SWR) floor trap plaint with stainless steel grating including jointing with solvent cement complete all as specified and directed.
S&F 110 mm dia gully trap,setting jointing towith solvent cement complete all as specified and directed
S&F for PVC (SWR) Junction single (Single T) equal or unequal of 110mm with access door etc all as specified and directed.
S&F for PVC (SWR) Junction single (Single T) equal or unequal of 75mm with access door etc all as specified and directed.
S&F CP grating 100mm dia complete all as specified and directed.
S&F 20mm dia gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe and all as specified.
S&F 110mm dia PVC (SWR) vent cowl etc all as specified and directed.
M & L for PCC 1:3:6 type C2 using 40mm graded aggregate as in foundations, filling and mass concrete complete all as specified and as directed by the Engineer-in-Charge.
M & L for cutting holes into or through or brick walls built in cement morotr area nexc 15oSqcm and N exc 400 sqcm depth upto 10 cm complete all as specified and as directed by the Engineer-in-Charge.
M & L for Providing, cement concrete 1:2:4 type B0 using 12.5 mm graded aggregate as in roof kerbs or mud stops, rounded or chamfered on edge complete all as specified and as directed by the Engineer-in-Charge.
Dismantling of plain or corrugated plain or corrugated steel sheeting , any gauge , thickness, including nainital pattern roof covering all as specified and as directed
Distmantling of wrought iron or mild steel work of any description not otherwise specially provided for all as specified and as directed
Excavation over areas n exc 1.5m deep and getting out in soft/ loose soil all as specified and directed by Engr-in-Charge
Removing exacavated/ demolished material exc 1.50km but not exc 5km and depositing where directed at a level n. exc 1.5m above the starting point. Including demolished material complete all as specified and directed by Engr-in-Charge
M&L for 10 to 12 mm thick exterior tiles of any colour size 300x300mm in neat cement slurry and pointed in white or coloured cement to match the shade tiles including 15mm thick screed bed layer in CM (1:6) complete all as specified and directed.
M&L for PCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in coping, bed plates benching etc slightly rounded or chamferred angles and throating, complte all as specified and directed.
M&L for Extra for forming fair finished drain or drain channel 30 cm inner girth in cement concrete using extra cement including forms moulds mitred stopped ends etc complete all as spd.
M&L for Providing pre - cast cement concrete as in cover slab (1:2:4) type B-1 using( 20 mm graded crushed stone aggregate) as in manhole cover of any size including RCC ring/Frame and MS frame set in CM (1:4) etc complete all as specified and directed.
M&L for RCC NP3 pipe dia 150 mm bore laid and jointed with collars in cement mortar complete all as specified.
M&L for PCC 1:3:6 type C2 using (40mm graded stone agg) to drain pipes 150mm dia including packing under, and haunching against the sides of pipes after they are laid and tested complete all as specified and directed.
M&L for Cutting into existing manholes, brick wall (ground/first floor) for connecting new drain pipe/bend/Tee of following sizes and making good to pipe or wall leak proof and rendering cutting out existing benching for and forming branch channels (½ round or ¾ section) manholes and filling cut of walls by cement concrete (1:2:4) type B-1 using 20 mm graded crushed stone aggregate smooth finish and reforming benching as required for following internal dia of pipe complete all as directed by Engineer-in-Charge.
M&L for 75mm thick PCC (1:2:4) type B-1 using 20mm stone agg as in sub base/ flooring complete all as specified and directed.
M & L for non skid Heavy duty Endura tile 400x400x12mm thick coloured joint free in floors etc set and jointed in neat cement slurry and pointed in colored cement to match over and including 15mm thick screed in CM 1:4 complete all as specified and directed.
Demolition of brick work or stone masonary built in cement mortar including all quoins, arches, pillars etc complete.
M&L for powder coated anodised aluminium doors (sliding/hanging type) with frame size 101.60X44.45X 2.00 mm thick and shutter aluminium anodised and top rail 47.62X 44.45 X 1.50mm and style 47.5 x 44.5 x1.5 mm , lock rail 83.50X 44.45 X 1.50 mm and bottom rail150.00X 44.50 X 2.50 mm incl necessary aluminium fittings like aluminium butt hinges 04 Nos , aluminium handles 150mm 02 Nos,aluminium tower bolts 200mm 01No, mortice lock 4 lever MS, hydraulic door closer of suitable capacity 01 No, aluminium door stoper 01 Nos, jointing cleats,glazing cleats,rubber packing , anodised aluminium shape beading, screws etc with panelling in two parts with 12mm thick prelaminated partical board in lower panel and 5mm thick tinted glass in upper panels incl all fittings& fixture complete all as specified and directed.
M&L for sand filling under floors or in foundations including watering and construction complete all as specified and directed.
S&F rebated mortice aluminium lock verticle type size 100mm with 4 levers complete all as specified and directed.
S&F for powder coating Anodised aluminium frame/shutters for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed.
M&L for anodised aluminium powder coated door shutters, aluminium section weighing 1.5kg/m (minimum) including all necessary fittings, joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws and lock etc complete all as specified and directed.
S&F aluminium door closer hyudraulically regulated disignation No 3 universal type suitable for door shutter of 851 to 1000 mm in width and of weight between 61 to 80 Kg and fixed complete all as specified and directed.
M&L for complete removal of existing treatment of old plastered surfaces of walls and applying two coats of plastic emulsion paint over a coat of primer with a thin layer of 1.5 mm thick wall care putty complete all as specified and directed.
S&F stainless steel Blood Basket
S&F stainless steel Plate Basket
S&F stainless steel Cup Basket
S&F aluminium handle in circular shape for pull of door shutter complete all as specified and directed.
M&L for Earthing complete with galvanised steel earth plate electrode 60 x 60 cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised iron wire 4mm dia as earth lead wire by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in Electrical plate No. 3, MES SSR Part I- 2009 with 15 mm dia medium grade GI pipe as a protection to earthing lead and 20 mm dia medium grade GI pipe for watering purpose including excavation & earth work in any type of soil, funnel, wire mesh, RCC pit with cover, cast iron frame complete and connected to earthing test point all as specified or indicated including testing on completion. Notes (i) The concrete pit shall be PCC (1:3:6) type C-1, 40mm thick precast cover slab of RCC with suitable Mild steel handle in lieu of cast iron cover shown in electrical plate No 3 of MES SSR Part-I (ii) PCC pit shall be provide at least 500 mm away from the earth pit and not on just on the eath pit and extra cost of additional length of water pipes and fittings junction etc shall be deemed to be included in the rate. (iii) Item includes the cost of 7.5 metre earth lead wire and GI pipe for protection of earth wire. Any varriation in quantity shall be adjusted.
M& L for sub main wiring with 2 run of single core PVC insulated and PVC Unsheathed, multistranded copper condutor of nominal area 6 sqmm FRLS, 1100 Volts grade cable drawn into and including rigid non metalic PVC Conduit of including all fittings and one run of PVC insulated and PVC unsheathed, multistranded copper conductor of nominal area 6 sqmm FRLS 1100 volts grade cable continuous earth wire of green colour code complete. Note:- (a) Two runs of 6.0 sqmm cable and one run of 4 Sqmm cable as earth lead with conduit shall be measured as one unit length for payment. (b) Quoted rate shall deem to be included cost of cutting chasses in wall for concealling conduit and making good to match with existing finish.
S&F factory made, sheet metal enclosure distribution boards, double door type, protection class (IP-42), suitable for mounting MCBS confirming to IS-13032, IS8623, BS-5484 with min 200 Amps rating copper bus bar, SP and N 4 ways, 220 volts. Note : MCB/ shall be measured and paid seperatly under respective item of this schedule.
Supply and fixing 240V, 10 KA 'C' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB complete with connection testing and commissioning.
Supply and fixing 240V, 10 KA 'C' curve miniature circuit breaker (MCB) of single poles and Neutral and current carrying capacity 40 to 63 AMP, in the MCB DB complete with connection testing and commissioning.
Supply and fixing of Exhaust fan, copper wound winding of 300mm swep, 1400 RPM, 750 CMH, 230 volts, 50 Hz, single phase complete with louvers, making of hole & grouting nut & bolts and connecting with 3 run of 1.5 sqm, multi core, PVC insulated copper cable from ceiling rose and making good the disturbed surface with existing colour matching complete all as specified and directed. Make : Bajaj Model No. FRESHEE.
S & F water heater storage type (Geyser) vertical type with suitable size of fastner and incl provision and connecting up of SS braided pipe with adopter for inlet and outlet water connection, having adjustable knob for temperature control and inner tank material of superior glass lined tank and outer body material ABS with high pressure with standing capacity upto 8 bar pressure complete all as specified of capacity 25 ltr having heating element 1.5 KW and complete all aspecified and directed by Engineer-in-Charge .
Supply & fix in repair factory made epoxy powder coated Load line Distribution Board TPN-4 ways with metal door (IP-43 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including insulated 200 Amp copper bus bar, Isolated neutral bar, standard DIN rail, Earth bar and cable ties for cable management, top and bottom removeable gland plates with knockouts and suitable for one TPN- MCCB 100 Amp as incomer and 6 to 63 Amp SP MCBs outgoing complete all as specified and conforming to IS : 8623.
Supply and fix in repair MCCB 63 Amps, FP 415 volts 16 KA 50 HZ with thermal magnetic setting complete all as specified and directed by Engineer in charge.
Supply installation commissioning and testing hi wall split units indoor and outdoor complete with cordless remote control unit and with in built air ioniser and plasma filter for better indoor air quality with minimum 5 star rated, invertor type and capacity 2 ton including breaking necessary hole in wall any type for fixing indoor and outdoor unit and making good disturbed surfaces with cement mortar and paint to match existing surface, all as required including necessary connections complete all as specified and directed. Make : Corrior / Voltas / Blu star.
Supply and fix Voltage stabilizer for automatic operation, single phase naturally air cooled outdoor type,Built-In Thermal Overload Protection,Low & High Voltage cut-off Protection & designed for input variation between 150 V to 285 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 5 KVA ,all as required including necessary connections complete all as specified and directed Make: V GUARD(Model No: VND500) / BLUEBIRD(Model No:BA514A)or equivalant .
Supply and fix AC starter unit consisting of one 25 Amp capacity starter, one 240 volt 25 Amp 10 KA SPN MCB, one 25 Amp sockets and one 25 Amp plug top prewired.
Supply, laying, jointing & testing of underground LT cables XLPE insulated, PVC sheathed, aluminium conductors, multistranded, armoured heavy duty 1100 Volt grade cross sectional area 25 Sqmm 3.5 core.
M& L for sub main wiring with 2 run of single core PVC insulated and PVC Unsheathed, multistranded copper condutor of nominal area 4 sqmm FRLS, 1100 Volts grade cable drawn into and including rigid non metalic PVC Conduit of including all fittings and one run of PVC insulated and PVC unsheathed, multistranded copper conductor of nominal area 4 sqmm FRLS 1100 volts grade cable continuous earth wire of green colour code complete. Note:- (a) Two runs of 1.5.0 sqmm cable and one run of 1.5 Sqmm cable as earth lead with conduit shall be measured as one unit length for payment. (b) Quoted rate shall deem to be included cost of cutting chasses in wall for concealling conduit and making good to match with existing finish.
Taking out and relaying of LT cable of size 35 Sqmm to 120 sqmm including excavation, returning filling complete all as specified and directed.
Dismantling of existing LT Panel refixing including breaking of foundation etc complete all as directed. Note : (i) PCC work included in the quoted rates. (ii) Cable glands should be provided for all incoming and outgoing connections.
Supply and laying old size bricks of size 230mm x 113mm x 75 mm for cable protection complete all as specified and directed.
M & L for Point wiring with PVC insulated PVC unsheathed cable single core nominal area 1.5 sq mm FR with stranded copper conductor 1100 volts grade drawn into and including PVC conduit (concealed) 19mm internal dia with all PVC conduit fittings such as Tees. elbows, bend, reducers etc and 1.5 Sqmm unsheathed copper conductor earth wire connected to earth dolly including junction box, grid plate , bse plate suitable for modular switches, sockets, regulators. Note : (1) The rates of chase cutting on wall concealing conduit and steel terminal boxes are included in the unit rates. (2) Colour code of wire will be strictly followed, Red for Phase, Black for neutral and green for earth wire (3) Switches & sockets shall be measured and paid for separately. (a) One light/fan/bell point controlled by one switch single pole one way.
(a) One light/fan/bellpoint controlled by one switch single pole one way
(b) All as per item No 194 here-in-before but one 3 pin 6 amp switch socket out let independent .
(c) All as per item No -194.02 here inbefore but one 3 pin 5 amps socket outlet on the same board with other switch complete .
All as per item No 194 here-in-before but using 02 Nos. 4.0 sq mm size for main cable and 01 No.4.0 sq mm size as earth conductor for one 16 Amp switch socket outlet on independent board.
Supply and fix modular sockets 6 Amp 2 in 1 2/3 pin combined all as specified and directed.
Supply and fix switch modular flush type 15/16 Amp single pole one way 240 volt one module ISI marked
Supply and fix modular sockets 16 Amp 2 in 1 3/5 pin combined all as specified and directed.
Supply and fix ceiling rose surface bakelite 60x25mm three terminal
S&F LED batten luminaire surface mounted, 4 feet system wattage of 20 Watts, system lumen efficiency >90 lumen/watt, 6500k and including connecting from ceiling rose to fitting complete all as specified and directed.
S&F LED batten luminaire surface mounted, 2 feet system wattage of 10 Watts, system lumen efficiency >90 lumen/watt, 6500k and including connecting from ceiling rose to fitting complete all as specified and directed.
S & F LED light fitting 1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size.
Supply and fixing in repair Ventilating Fan 250mm sweep, non metallic resin body, single phase 240 volts AC 50 Hz including louvers, and copper cable 3 core of size 0.5 sqmm for connection from ceiling rose to fan complete all aspecified and directed by Engineer-in-Charge. Note : Old material deposited to MES store Yard
Supply and Fix in replacement of 35W High efficient LED Street light fitting with pressure die cast LM6 Aluminum housing and has lenses specially designed for Street Lighting with polycarbonate cover including provision of 40mm dia GI light grade pipe1.5 meter length bend to shape and necessary clamps etc for fixing the light fittings on pole fixed complete as specified and directed.
Supply & fix MCB DB SPN 8 way, double door, IP-43, IK-09, Isolated Neutral Bar and fixed flush to wall and suitable for universal mounting complete all as specified and directed.
S & F sheet metal enclosure with socket and plug top and MCB single pole and neutral enclosure with two Pin and earth plug and socket complete with one single pole MCB, 240 V, 20 Amp.
M& L for sub main wiring with 2 run of single core PVC insulated and PVC Unsheathed, multistranded copper condutor of nominal area 1.5 sqmm FRLS, 1100 Volts grade cable drawn into and including rigid non metalic PVC Conduit of including all fittings and one run of PVC insulated and PVC unsheathed, multistranded copper conductor of nominal area1.5 sqmm FRLS 1100 volts grade cable continuous earth wire of green colour code complete. Note:- (a) Two runs of 1.5 sqmm cable and one run of 1.5 Sqmm cable as earth lead with conduit shall be measured as one unit length for payment. (b) Quoted rate shall deem to be included cost of cutting chasses in wall for concealling conduit and making good to match with existing finish.
S&F LED Flood light fitting 100 Watt, 230 V AC outdoor type with multiple optics and equipped with ingress protection level minimum IP-65, with corrosion resistant cast aluminium body complete with electronic driver and LED panel and surge protector with all accessories internally pre-wired on existing pole complete all as specified and directed.
Supply and fix XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 6 Sq mm of 3 core complete all as directed by Engineer-in-Charge.
Supply, laying, jointing & testing of underground LT cables XLPE insulated, PVC sheathed, aluminium conductors, multistranded, armoured heavy duty 1100 volt grade cross sectional area 16 Sqmm 2 core complete all as specified and directed.
Supply, laying, & testing cable XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured electric power cables (heavy duty) 1100 volt grade with stranded aluminium conductor of size 35 Sqmm 3.5 core complete all as specified and directed.
Note :- Credit shown in credit schedule of tender document shall be considered by the tenderer while quoting the rates of various items of this schedule. The same shall be recovered from various payment to contractor before handing over old material.
M/S R S Traders
MOHAMMAD RIZWAN CONTRACTOR
R K CONSTRUCTION COMPANY
Bharat Trading Company
M/S A M ENTERPRISES
chauhan construction
M.R. ENTERPRISES
M/S SATISH KUMAR
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .