8477 SPL REPAIR TO BLDG NO 1A AT COLABA MUMBAI UNDER GE NW KUNJALI FITMENT OF ADDITIONAL 91 IN NOS FIRE SENSORES AT FMU MBI SS COMPLEX BLDG NO 49 AT NAVAL DOCKYARD MUMBAI And PROVISION OF WOODEN FLOORING IN GROUND FLOOR AT DOCKYARD HOUSE UNDER AGE B

Amount

Taking down shutters of any description exc 1 Sqm but n exc 2.00sqm each easing adjusting etc and refixing in the same opening completed all as specified and directed

S&F 8mm to 10mm thick wooden flooring and skirting including spung/polythene complete all as specified and directed. (Make-hego/pergo or equivelent)

French polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on old surfaceswith two or more coats

M&L for preparation of old decorated surfaces of wall and applying one coat of oil emulsion distemper all as specified and directed

Demolition of cement concrete in ground floor and pavings not excd 15cm thickness (below or above ground level).

Demolition of Brickwork or stone/ boulder masonary built in cement mortar including all quooins, arches, pillars etc but excluding ashler facings, dressed stonework and precast concrete articles.

Demolition of reinforced cement concrete, roofs, floors ( other than ground floor) beams, staircases, landing, chajjas and similar suspended works.

Dismantling stone slab and tiles of any descriprion or thickness in floors aprons etc. set and joined cement mortar all as directed.

Dismantling floor, hearth and wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premisses.

Taking down cement plaster on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc.

M&L for hardcore of broken stone gauge n.exc 63 mm deposited spread and levelled in layers n.exc 15 cm thick watered and rammed to a true surface all as specified and directed.

M&L for PCC 1:4:8 type D-2 (using 40 mm graded aggreagate) as in foundations, filling and mass concrete

M & L for brick work with sub class 'B' bricks straight or curved on plain exc 6m mean radius built in CM 1:6

M & L for brick work with sub class 'B' bricks straight or curved on plain to any radius in half brick thick wall built in CM 1:4

M & L for RCC 1:2:4 type B1 (using 20mm graded stone agg) Nominal mix as in foundations, including rafts, footings, foundation beams, plinth beams, bases for columns etc basement slabs, under reamed piles and mass concrete

M & L for RCC 1:2:4 type B1 (using 20mm graded stone agg) Nominal mix as in columns, pillars, piers, posts and struts.

M & L for RCC 1:2:4 type B1 (using 20mm graded stone agg) Nominal mix as in beams, contilivers, bressumers, lintels over 1.5m span

Formwork rough finished to sides of concrete foundations, bases of columns, raft and raft beams, sides and soffits (if any) of foundations and plinth beams, and similar work, vertical or to batter

Form work rough finished to sides of pillars, post, columns

Use and waste of form work to sides and soffits of floor or roof beams, beam haunchings,griders, bressummers, lintel, cantilivers, shelves including supports overhangs, etc also splays between floors and beams etc rough finished surface of concrete complete all as specified.

M&L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending , hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia.

All as per srl item No. 21 above but 5mm dia and over including 10mm dia in stirrups, spaces and binders etc all as specified.

M&L for 100 mm thick cement concrete 1:3:6, type C-2 (using 40 mm graded stone agg) as in sub base of floor all as specified and directed.

M&L for 20 mm thick granite (of any type) work (table rubbed and polished ) in steps, jambs, pillars, window cills, platforms and like in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite incl 20 mm thick screed bed in cement mortar 1:4 all as specified and directed.

M & L for light shade vetrified ceramic tiles 10mm thick (square/ rectengular) polished, area of each tiles not exc 0.36sqm (600 x 600mm) in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the floor including 15mm thick screed bed in cement mortar 1:4

M&L for non skid coloured ceramic stiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.18 Sqm but not exc 0.38 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15 mm thick screed bed in cement mortar 1:4 all as specified and directed.

M&L for machine cut shahabad stone slab flooring 16 to 20 mm thick over and incl 20 mm thick screed bed in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M & L for preparation of newly platered surfaces of walls and applying two coats of weather proof acrylic based paint (100% acrylic) over a coat of 1 to 2mm thick wall care putty all as specified and directed.

Rendering 15mm thick on brick or concrete surfaces in cement mortar 1:4 finished even and fair including mixing integral water proofing compound in the proportion as mentioned in manufacturer's instructions complete all as specified. (Water proofing compound to be measured and paid for separately).

M&L for Providing cement concrete in steps, seismic and other similar bands, parapets and railings up to 60 cm in hieght, coping, kneeless apex stones , bed plates, kerbs not provided for including weathering, slightly rounded or chamfered angles all as directed, 1:2:4 mix type B-0.

M&L for preparation of old decorated surfaces of walls, soffits, roof facia and applying one coat of weather proof acrylic based paint (100% acrylic) with necessary scafolding for high rise bldgs etc all as specified and directed.

M&L for Complete removal of existing treatment of old decorated surfaces of walls soffits, facia roof and applying two coat of weather proof acrylic based paint (100% acrylic) over one coat of cement base primer with necessary scafolding for high rise bldgs. etc all as specified.

Dismamtling wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/ slabs/blankets any thickness including cover fillets etc all as directed.

M & L for false ceiling made out of 600 x 600x 4 to 6 mm thick ceiling board/ tiles deep panel suspensor system madeout of powder coated GI sheet main tee of size 23.50x40x0.63mm and cross tee of size 23.50 x 23.5x0.63mm and angle size 19 x 19x 0.63mm including 3mm GI wire for suspending bolts necessary washers nut/ clits/ pin hook etc. for securing frame work to ceiling to the snap grid all as directed by Engr-in-charge including provn of necessary holes/ cuttings for providing light/ fan as required including making necessary recesses/ projected pattern complete all as specified and as directed. (Make - Armstrong/ Chanakya/ Everest)

Complete removal of existing treatment on wall surfaces by scrapping, washing & rubbing down and applying two coats of oil bound distemper over a coat 1 to 2 mm thick wall care putty (JK/ Birla) and primer incl preparation of surfaces complete all as specified and directed.

Taking down carefully old U/S point wiring copper/Aluminum (light/ fan /sockets/power) complete with switches, sockets, fan regulators, ceiling roses, lamp holders, brackets, removing material to store for keeping in safe custody and making good to disturbed surfaces as directed by Engineer-in-Charge

M & L for concealed point wiring with FRLS PVC insulated unsheathed multi stranded copper conductor cable of 1.5 sqmm size 1100 volts grade ( Make of Wire: Plaza/Gloster/Havells/Polycab) drawn through and including non metalic rigid PVC Conduit not less than 25mm width with all accessories fixed on wall including FRLS PVC insulated, unsheathed multistranded copper onductor cable of size 1.5 sqmm as earth continuty conductor connecting to common earth dolly including modular box with cover plate frame in any module ( ISI marked) for fixing the modular switches, sockets regulator etc complete all as specified for following:-

One light point controlled by one switch

One Fan point controlled by one switch

One 5 Amps switch socket combination on independent board

One 5 Amps switch socket combination on same board

M & L for point wiring with FRLS PVC insulated unsheathed multi stranded copper conductor cable of 2.5 sqmm size 1100 volts grade drawn through and including suitable size PVC non metalic rigid conduitnot less than 25mm width with all accessories fixed on wall including FRLS PVC insulated, unsheathed multistranded copper conductor cable 2.5 sqmm as earth continuty conductor, connecting to common eatrh dolly including modular box with cover plate frame in any module ( ISI marked) for housing one No switch socket 15Amps complete all as directed. Make of Wire: Plaza/Gloster/Havells/Polycab

M&L for concealed sub-main wiring with 2 runs of 2.5sqmm copper conductor cable (FRLS grade), 1100 volts grade PVC insulated and unsheathed multi-stranded, drawn in and including heavy grade PVC casing & caping not less than 25mm dia (internal width) with all accessories like tees, elbows, junction boxs, reducer etc as required, including one run of 2.5sqmm dia PVC insulated unsheathed copper conductor cable as earth dolly/mains, with all accessories like PVC elbow, PVC tee, etc including taking up/down old unservucable sub main wiring and making good the distrubed surfaces/location complete all as specified and directed. Note: (a) Colour coding shall be followed as (i) Phase- Red (ii) Neutral - Black (iii) Earth - green (b) Make of wire : Polycab/ Havells/ Finolex

M&L for concealed sub-main wiring with 2 runs of 4.0sqmm copper conductor cable (FRLS grade), 1100 volts grade PVC insulated and unsheathed multi-stranded, drawn in and including heavy grade PVC casing & caping not less than 25mm dia (internal width) with all accessories like tees, elbows, junction boxs, reducer etc as required, including one run of 4.0sqmm dia PVC insulated unsheathed copper conductor cable as earth dolly/mains, with all accessories like PVC elbow, PVC tee, etc including taking up/down old unservucable sub main wiring and making good the distrubed surfaces/location complete all as specified and directed. Note: (a) Colour coding shall be followed as (i) Phase- Red (ii) Neutral - Black (iii) Earth - green (b) Make of wire : Polycab/ Havells/ Finolex

S & F Flexible LED strip uses high brightness SMD LED as the light source for indoor application only. It is highly suitable for cove-lighting, decorative lighting etc and all as directed by Engr-in-Charge. Make- Bajaj /C&S/Wipro/Philips/Havells

S & F LED Driver 12 volt DC for LED strip as the light source for indoor application only. It is highly suitable for cove-lighting, decorative lighting etc and all as directed by Engr-in-Charge. Make- Bajaj /C&S/Wipro/Philips/Havells

Supply and fix ceiling rose surface bakelite three terminal of size 60x50 mm,240 Volts AC complete

S & F modular switch 1 way 6A,1 module all as specified and directed by EIC. Make: Anchor/Roma/Crabtree.

S & F modular socket, 6A - 2/3 pin combined 2 modules all as specified and directed by EIC. Make: Anchor/Roma/Crabtree.

S & F modular socket 6/16A,2/3 pin, combined 2 module all as specified and directed by EIC. Make: Anchor/Roma/Crabtree

S & F modular switch 1 way 16A,1 module all as specified and directed by EIC. Make: Anchor/Roma/Crabtree.

S & F wall mounted fan, 400 mm sweep, single phase oscillating complete fixing accessories required at site and making good the distrubed surface & connection copper cable from ceiling rose to exhust fan complete all as specified and directed by EIC. Make: model No Havells (D'zire')/Usha/CG/Orient.

S&F for modular fan step regulator, 120W - 2 modular all assspecified and directed by EIC. Make: Anchor/Roma plus/Legrand

S&F of double door type SPN DB 08 Way ,240V with 100A copper busbar each phase , double door type IK 09 protection suitable for housing MCB's all as specified and directed by EIC. Make: C&S/ Seimens/Havells. Note : MCB DBs shall be concealed in wall where ever posible including making good the surface to match with surrounding.

MCB FP 63 Amps, 10 KA,C' series 415V complete all as specified and directed. Make : Legrand/Seimens/GE

MCB SPN 63 Amps, 10 KA C' series 240V complete all as specified and directed. Make : Legrand/Seimens/GE

MCB SP 6 - 32 Amps, 10 KA C' series 240V complete all as specified and directed. Make : Legrand/Seimens/GE

Supply and fixing LED 2 x 18 Watt Wall light out door with high pressure die cast housing with toughened glass and individual LED with secondary optics and IP66 protection complete all as specified and directed by EIC.Make : Wipro/Jaquar/C&S/Philips/Bajaj

Supply and fixing LED 9 Watt Nebula Micro Spykz with high pressure die cast housing with toughened glass and individual LED with secondary optics and IP66 protection complete all as specified and directed by EIC.Make : Wipro/Jaquar/C&S/Philips/Bajaj

Supplying installation, Testing & Commissioning of Microprocessor based 2 loop capacity, Networkable analogue addressable type fire alarm control panel with min.600 character LCD display, The panel should be equipped with sufficient numbers of 1 loop with up to 10 to 15% spare capacity with each loop shall have a capacity of minimum 99 detectors and 99 analog addressable devices in one loop. Four access levels, capable of taking Flash Scan devices, flash EPROM sufficient numbers of programmable relay controls for controlling AHUs, pressurization fans, ventilation fans at fire pump room, monitoring of fire sprinkler and fire hydrant pump, 240 volts AC power supply, automatic battery charger, 24 volts sealed lead acid batteries sufficient for 24 hours normal working and then be capable of operating the system for 2 hours during an emergency conditions as required. and panels shall have provision of intigraton with BMS System.(UL/EN Approved) as per tender specificaiton.Panel shall be integrated with respective to the zoning of PA System so that incase of fire so PA System shall automatically come in announcement mode as per tender specificaiton. Make : Honeywell/Siemens/Bosch/Morley

LANDLINE FIRE ALARM AUTO DIALER WITH sms and Memory Available To Store 10 Phone Numbers dialling facility to reach the fire brigade to get the intimation about the location of the area Builtin Emergency Speech Dialer with 8 Numbers & 1/ 2 Messages,NO/NC contacts for both fire and fault, Automatic changeover arrangement to standby supply with battery charger with low battery indication,Fault/ failure indication such as MAINS FAIL, short, open, Battery FAIL etc,Micro-Controller Based System,Both Dialling Modes Can Be Used (Pulse/Tone),Recorded Message Playback Speaker Provision Available. Make : Agni/Ravel/Atss

Supply, Installation, testing and commissioning addressable Manual call point(Pull down/Break Glass Type). The device shall have an LED which shall blink in normal state and get steady on activation to monitor the health status of the device and shall be underwritters laboratories listed, semi flush type complete all as specified and directed. Make : Honeywell/Siemens/Bosch/Morley

Supplying installation, Testing & Commissioning of Addressable monitor modules for Sprinkler Flow Switch and Door Holders as per tender specification. Make : Honeywell/Bosch/Morley/Siemens

Supply fix and commissioning and test of addressable electronic hooter with built in amplifier unit with two tone generator of 100 meter range complete all as specified and directed. Make : Honeywell/Siemens/Bosch/Morley

Supplying installation, Testing & Commissioning of Analog addressable Multi Criteria (Optical +thermal) detector with mounting based LED for AFC(Above Celling & below celling .) as per tender specificaiton all as specified and directed. Make : Honeywell/Bosch/Morley/Siemens

Supplying installation, Testing & Commissioning of Addressable control modules for AHU, Access control Integration & stairs Pressurization Fan Hooters / Sounders / Strobes etc.as per tender specificaiton. Make : Honeywell/Siemens/Morley/Siemens

Supply and fix fault isolator module with automatic resetting arrangement complete all as specified and directed. Make : Honeywell/Edward/Bosch/Morley/Siemens

Supply & laying PVC FRLS armoured cable 1.5sq mm solid copper conductor 2 core, XLPE Insulated, Extruded PVC sheathed, galvanized steel strip, electric power cables (heavy duty) 1100 Volts grade, laid in duct / along pole/wall etc including making connection complete and making good the distrubed surface matching with existing surface complete all as directed. Make of wire : Polycab/ Havells/ Gloster Note : 1. The cost of Al thimbles/lugs and cable gland etc is incl in quoted rate and no extra payment will be made for it. Make; Polycab/ KEI/RR.

Supplying installation, Testing & Commissioning of Response indicator for Above celling detectors & Cabin Detectors Make : Honeywell/Bosch/Morley/Siemens

S & F addressable loop card Make : Honeywell/Edward/Bosch/Morley/Apollo NOTE FOR ITEM NOS. 57 TO 67 ABOVE QUOTED RATES INCLUDE MAKING ANY ALTERATION ON POP/GYPSUM CEILING AND TESTING OF FIRE ALARM PANEL AND PROVIDING TEST CERTIFICATE DULY SIGNED .

ASHOK ENTERPRISES

AGRAWAL ASSOCIATES