PROVN OF MAINTENANCE CELL INSDE ARMY WAR COLLEGE AND SPL REPAIR TO WINDOWS, VENTILATORS AND CHAJJAS FOR BLDGS CC 62, CC 90 AND CC 91 (ADM BLOCKS) AT AWC UNDER GE (AWC) MHOW

Amount

Earth work in excavation of all kind of soil by mechanical means (Hydraulic excavator) means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5m, as directed by Engineer-incharge

Earth work in excavation of all kind of soil by mechanical means (Hydraulic excavator)/ in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. complete all as specified and directed.

Description same as per Item No. 2.00 but each additional 1.5 m or part thereof in depth beyond the first 1.5 m complete all as specified and directed.

Returning filling in, including spreading, leveling, watering and well ramming in layers n. exc 25 cm thick in any type of soil complete all as specified and directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc 1.5 m above the starting point complete all as specified and directed.

M & L PCC 1:4:8 type D-2 using 40 mm graded aggregate as in mass concrete, foundation and any other location etc. complete all as specified and directed.

M&L for RCC (design mix) M25 ( 20 mm graded aggregates) as in foundations, including rafts, footings, foundation beam, plinth beams, bases for columns, etc, basement slabs, under reamed piles and mass concrete complete all as specified and directed.

M&L for RCC (design mix) M25 ( 20 mm graded aggregates) as in Columns, pillars, peirs, posts, and struts complete all as specified and directed.

M&L for RCC (design mix) M25 ( 20 mm graded aggregates) as in Beams , cantilivers , bressummers , lintles over 1.5 M span complete all as specified and directed.

M&L RCC M-25 (Design mix) using 20mm graded stone aggregate as in slabs supported on walls, beams, and columns complete all as specified and directed.

M&L RCC M-25 (Design mix) using 20mm graded stone aggregate as Chajjas complete all as specified and directed.

Use and waste of formwork to rough finished sides of concrete foundations, footings, bases of columns, raft and raft beam, sides and soffits(if any) of foundation and plinth beams and similar work, vertical or to batter surfaces for rough finished flat surfaces of concrete, complete all as specified and directed.

Use and waste of formwork fair finished surface of concrete as in Square, rectangular or polygonal to sides of columns, pillars, posts, struts, piers etc.complete all as specified and directed.

Use and waste of formwork fair finished surface of concrete to sides and soffits of floor or roof beam, beam hauchings, bressummers, lintels, shelves etc. including supports, overhangs, etc, complete all as specified and directed.

Use and waste of form work to soffits of suspended slab such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick (Horizointal or slooping) complete all as specified and directed.

Use and waste of formwork to chullah hoods, chajjas, troughs and similar items including edges complete all as specified and directed.

Use and waste of form work to edges of concrate flats, treads, breaks in floors, and roof n.exc 20 cm wide and sides of RCC/PCC bands in walls horizontal or sloping and similar work exc 10 cm but not exc 20 cm wide complete all as specified and directed.

S & F TMT bars 10 mm dia and over, cut to length, bent to shape as required incl cracking, bending spirally for hooking for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia, complete all as specified and as directed

Description same as per Item No. 18.00 but 6mm to 8mm dia complete all as specified and directed.

Description same as per Item No. 18.00 but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders etc complete all as specified and directed.

M&L brick work with fly ash modular bricks straight or curved on plan exc. 6 m mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L brick work with fly ash modular bricks straight or curved on plan to any radius in half brick thick walls, built in in cement mortar 1:3 complete all as specified and directed.

M & L 40 mm thick Damp proof course in cement concrete 1:2:4 type B-0 with incorporating integral water proofing compound in the manner specified by the manufacturer and in the proportions indicated, to horizontal or vertical surfaces including necessary formwork complete all as specified and directed. Note:- WPC will be measured and paid separately.

M & L PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in cills, steps, seismic and other similar bands, plinth courses, string courses, parapets and railing upto 60 cm in height, coping, kneelers, apex stones bed plates, etc and the like including weathering, slightly rounded or chamfered angles and throating, as directed including necessary use and waste of form work, complete all as specified and directed.

M & L rendering 10 mm thick on brick wall/cement block wall or concrete surfaces in cement mortar 1:6, surfaces finished even and smooth without using extra cement , complete all as specified and as directed.

M & L 5 mm thick rendering in cement mortar 1:3 on concrete surfaces as in ceiling surface finish even and smooth without using extra cement , complete all as specified and directed..

M & L Plastering 15 mm thick in two layers of 10 mm thick in bottom and 5 mm thick with WPC of top layer in Cement Mortar 1:4 on brick wall/cement block wall or concrete surfaces, surfaces finished even and smooth without using extra cement , complete all as specified and as directed. Note:- WPC will be measured and paid separately.

Supply only liquid water proofing compound all as specified and directed

M & L for preparation of newly plaster surfaces of ceiling and applying three coat of white wash complete all as specified and directed.

M & L Preparation of new wall surface and apply two coat of white wash on wall surface including washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete all as specified and directed.

M&L for applying 3 mm thick wall care putty on wall on internal old/new wall surfaces as per manufacturerer instruction complete all as specified and as directed

M & L for applying two coats of oil bound distemper over a coat of alkali resistant primer on prepared wall putty surfaces of internal wall all including washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete all as per specified and directed.

M&L preparing of newly plastered or unplastered surfaces of walls, cornices etc and applying two coats of cement base paint over one coat of cement primer, complete all as specified & directed.

M&L moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed.

M&L vitrified ceramic tiles mat finished light shade 09 to 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 Sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm screed bed in cement mortar 1:6 complete all as specified and directed

Descripton same as per Item No. 35.00 but in vertical surface including 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed.

M & L 20 - 25 mm thick machine cut Kota stone slab in flooring or treads of steps over and including 20mm thick screed bed in cement mortar 1:4, laid and jointed with grey cement slurry mixed with pigment to match with shade of slab/rubbing, polishing etc. complete all as specified and directed. Note:- (i) The size of Kota stone slab shall not less than 550 mm x 550 mm cut size, except the location where the balance portion remain less than size as specified above.

Description same as per Item No. 37.00 but as in riser of steps, skirting, dado and vertical surfaces including 10 mm thick rendering in CM 1:4, complete all as specified and directed.

M & L PCC 1:3:6 type C-1 using 20 mm graded stone aggregate as in plinth protection or similar places, surface finished even and fair without using extra cement incl necessary use and waste of form work complete all as specified and directed.

S & F framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

S & F Powder coated aluminium sliding glazed windows with three track shutter sliding (two shutters glazed and one shutter wire mesh) making good the adjacent side of jombs of windows by plastering in CM 1: 3 even and smooth complete etc . shifting of existing cooler stand where required complete all as specified and as directed by Engr-in-charge and should have following specification complete all as specified and as directed by Engr-in-charge. (i) Windows frame of cross section 101mm x 44mm x 1.5mm thick. (ii) Three way track for sliding shutters of cross section 91.8mm x 31.75mm x1.1mm thick. (iii) Sliding shutter frame of cross section 40 x 18 x 1mm thick. (iv) 4 mm thick tinted glass superior quality. (v) IDPE Rubber guasket for fixing of glass. (vi) Locking cleats per shutter -01 Nos. (vii) Sliding rollers per shutter - 02 Nos. (viii) Aluminium wire cloth 0.30mm nominal dia of wire and average width of aperture 1.56mm for shutters 01 Nos.

S&F powder coated aluminium ventilator cross section 63.5x38.10x1.5mm consisting of two partions upper portion shall have louvers with 3mm thick pin headed glass and aluminium wire cloth 0.30mm nominal dia of wire and average width of aperture 1.56m fixed with aluminium beads and securing on outer face of frame and lower portion of ventilation shall be fixed with 3mm thick pin headed glass with IDPE rubber gasket including aluminium beads, including preparation of jombs all around in CM 1:3 finishing even and smooth complete all as specified and directed.

S&F Pressed steel frames size 105x60 mm for doors with one or more rebates including necessary fixing lugs, hold fast, hinges, lock strike plate, etc., complete all as specified and directed.

S & F 35 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, complete all as specified and as directed

M & L Preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise description, over 10 cm width or girth apply two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F factory made Solid PVC Door Frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS Square tube, all as specified and directed.

S&F 30 mm thick factory made solid panel PVC door shutter (style) consisting of frame made out of M.S. tubes of 19 gauge thick & size 19mmx19mm for stiles and 15mmx15mm for top & bottom rails. M.S. frame shall have a coat of red oxide primer of approval make and shall be covered with 5 mm thick heat moulded plain colour PVC ‘C’ channel of size 30x50mm forming stiles and 5 mm thick wide pvc sheets for top rail ,lock rail and bottom rail on either side and 10 mm (5mmx2mm) thick having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour 5mm thick PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with 30 mm widex5 mm thick pvc ,sheet suitable PVC sheet beading, and joined together with solvent cement on either side,and additional 5 mm thick pvc stripes of 20 mm width is to be struck on interior side of "C" channel using pvc solvent adhesive complete at site as per specification complete all as specified and as directed.

S&F aluminium anodised barrel tower bolts 150 mm long of extruded section and fixed complete all specified and directed.

S&F aluminium anodised barrel tower bolts 200 mm long of extruded section and fixed complete all specified and directed.

S&F aluminium handles, size 150 mm cast type, anodised complete all as specified and directed.

S & F butt hinges, size 100 mm type C-21 extruded aluminium alloy with galvanised mild steel hinge pin, anodised ISI marked complete all as specified and directed

S&F 250 mm long aluminium alloy, anodised sliding door bolt with hasp, staple(bolt type) and fixing clips of sheet, cast of extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy fixed complete all as specified and directed.

S & F 25mm dia Stainless steel curtain road with barrket/supporter as approved design complete all as specified and directed

S & F Vitreous chaina wash down water closet pan (pedestal pattern), white including pedestrial pan and PVC trap, including seat cover for pedestial pan and connecting to drain or outgoing pipe and to flushing pipe, antisyphonage pipe etc complete all as specified and directed.

S & F 10 litres capacity PVC low level cistern ‘ white’ with inlet, float valve and handle including flushing pipe of PVC 32 mm dia and connection to pipes complete all as specified and directed.

S & F chromium plated fancy type stop cock/angle cock 15 mm dia cast copper alloy screwed down, high pressure, with crutch or butter fly handle screwed both ends for iron pipe or for unions and fixed, complete all as specified & directed.

S & F PVC connection 15 mm dia 600 mm long with PTMT nuts at both ends complete all as specified and directed.

S & F 15 mm bore bib taps chromium plated fancy type cast copper alloy crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule, and fixed complete all as specified and directed.

S & F 15 mm bore two way bib taps long body, chromium plated cast copper alloy long body , screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and directed.

S & F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified and directed.

S & F counter top vitreous china wash hand basin white or any colour , flat back of size 550mmx400mm fixed on and including fixing only of pilar tap, 32mm dia brass waste coupling and 32 mm dia PVC waste pipe complete all as specified and directed.

Supply only 15 mm dia bore fancy type chromium plated swan neck pillar tap, cast copper alloy, with capstan heads, screwed down high pressure with long screwed shanks and fly-nuts, screwed for iron pipe and fixed, complete all as specified and directed.

S & F brass chromium plated tubular towel rail, 20mm dia D type 60 cm long between flanges complete all as specified and directed.

S & F Vitreous China bowl urinal flat back, size, of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe complete all as specified and directed.

S&F PVC (SWR) 75 mm bore pipes single socketed in any length with rubber ring joints with solvent cement fixed to walls/flooor incluidng clamping complete all as specified and directed.

Description same as per Item No. 66.00 but bore of pipe 110 mm complete all as specified and directed.

S & F 110 mm dia bore PVC (SWR) bends any radius with solvent cement joints, fixed to complete all as specified and directed.

Description same as per Item No. 68.00 but bore of pipe 75 mm complete all as specified and directed.

S & F 110 mm dia bore PVC (SWR) junction single, single (T) equal or unequal, joints with solvent cement,complete all as specified and directed.

Description same as per Item No. 70.00 but bore of pipe 75 mm complete all as specified and directed.

S & F PVC (SWR) nahani trap/floor trap with grating having diameter of outlet 75 mm including jointing to waste pipe with solvent cement complete all as specified and directed.

S & F 110 mm bore PVC(SWR) vent cowl including taking out existing unserviceable cowl complete all as specified and directed.

S & F of CPVC 20 mm outer dia pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors, complete all as specified and directed.

S & F of CPVC 25 mm outer dia pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors, complete all as specified and directed.

S & F of CPVC brass elbow (3/4" X ½") for 20 mm outer dia CPVC pipe complete all as specified and directed.

S & F of CPVC brass Tee 20 mm outer dia CPVC pipe complete all as specified and directed.

S & F of CPVC Male Brass Threaded Adaptor (MTA/ MBTA) for 25 mm outer dia pipe complete all as specified and directed.

S & F of CPVC Ball Valve for 25 mm outer dia pipe complete all as specified and directed.

S & F of CPVC Tank Adaptor for 25 mm outer dia pipe complete all as specified and directed.

S & F of CPVC union for 25 mm outer dia pipe complete all as specified and directed.

Description same as per Item No. 81.00 but 20 mm outer dia complete all as specified and directed.

S&F Rotational moulded poly-ethylene water storage tanks ( cylinderical vertical with closed top ) 3-layer 500 litres capacity ,hoisted and fixed in position complete all as specified and directed.

S&F ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball , suitable for 25 mm bore pipe, screwed for iron pipe and fixed. (Minimum weight 25mm-455 gms.) complete all as specified and directed.

M & L non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exc 0.18 sqm , in floors etc.set jointed in neat cement sluury and pointed in white or coloured cement to match over & incl 15 mm thick screed bed built in CM 1:6, complete all as specified and directed.

M&L Glazed ceramic coloured tiles on vertical surfaces 450x350x7 mm / 450x300x7mm thick set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10mm thick backing coat to receiving to wall tiles in Cement mortar 1:4, complete all as specified and directed.

M&L Granite 20 mm thick(of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking plateforms and like including pointing in white cement(1:2) using marble dust with admixture of pigment to match with shade of granite over & incl 20 mm thick screed bed built in CM 1:4, complete all as specified and directed.

M&L Rounding to edges of stone slabs one edges, such as in steps, cooking platform, and other similar situations for bullnosing / moulding to exposed edges( any type) and polishing to match the adjoining surfaces complete all as specified & directed.

Cutting holes in brick walls built in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required all as specified and directed complete all as specified and directed.

M & L 25mm thick cement concrete type B-0, 1:2:4 (12.5 mm graded aggregate) as in levelling course in floor, complete all as specified and directed.

S & F tubular rolled sections as post, rafter, purlin, and its connected wk for shed structure and similar work complete using ERW or induction butt welded tubes conforming to I.S. 1161-1976 grade St.-240, complete all as specified and directed.

S & F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in sun shade, roof covering/ cladding to wall, and similar work fixed with self tapping screws complete all as specified and directed.

M & L Preparation of new or previously untreated steel and iron surfaces of any description, not otherwise description, over 10 cm width or girth apply two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer complete all as specified and directed.

M&L Water proofing treatment on "Non approachable / non accessible roof" surface (Horizontal & Vertical surfaces) in following sequence through authorized applicator of the manufacturer all as specified and directed complete all as specified and directed. Note:- (i) cleaning of new rendered surfaces properly and drying the surfaces. (ii) Applying a coat of oxidised bitumen based solvent primer @ 0.30 Kg / Sqm (iii) Laying 3 mm thick APP modified water proofing membrane with 100 mm over laps sealed and bounded to the surfaces by 'torchon' method. (iv) Applying two coats of bitiminous aluminium paint @ 200 Gram / Sq M (minimum) in two coats complete all as specified and directed. Make incorporated : HYPERPLAS POLYSTER OF IWL (INDIA) LTD or equivalent in Pidilite industrries Ltd /STP Ltd all as specified and as manufacturer instruction complete.

Exacavation in trenches, n. exc 1.5m wide and n. exc 1.5 m in depth for foundation etc or for shaft ,wall, cesspits, manholes, pier holes etc. n. exc 10 Sqm on plan and n. exc 1.5m in depth in any type of soil etc complete all as specified and directed.

M&L Salt glazed stoneware drain pipes 150 mm internal dia of grade ‘A’ laid in trenches & jointed as specified, complete all as specified and directed.

M & L 1:3:6 type C-2 using 40 mm graded stone aggregate cement concrete bed to drain pipe including packing under and haunching against side of pipe for 150 mm bore of pipe complete all as specified and directed.

M & L providing pre-cast cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate as in landings, cover slabs, chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces etc set in cement mortar 1:4 including chamfered weathering, throating etc with necessary form work complete all as specified and directed.

Surface excavation exc 30 cm 15 cm depth & average 15 cm deep & getting cut in soft/loose soil all as specified and directed by Engineer-in-Charge.

M & L Plastering 15 mm thick in Cement Mortar 1:4 on brick wall/cement block wall or concrete surfaces, surfaces finished even and smooth without using extra cement , complete all as specified and as directed.

S & F Reinforced concrete pipes 300 mm bore, class NP2 , laid and jointed complete with collars, including demolition and breaking up drain pipes, complete all as specified and directed.

M&L for River sand filling in trenches below and above/ arround UG cable for cable protection, in duct under & above the cables incl punning arround cable complete all as specified and directed.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required, complete all as specified and directed.

M & L machine pressed precast concrete 60 mm thick glossy interlocking paver block M-35 Grade to IS 15658-2006, with grey cement and pigment laid over and including 25 mm thick dry sand cushioning, filling of joints with sand, complete all as specified and directed. Colour and shape approved by GE.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames)exc 1.5 sqm but not Exc 4.0 sqm each and removal from site complete all as specified and directed.

M&L preperation of new plastered surface and applying one coat of oil bound distemper over 1mm thick wall care putty complete all as specified and directed.

Taking down Chowkhats or frames not exc. 1.5 sq.m each with shutters ( without taking off shutters from the frames) complete all as specified and directed.

M & L for reparing of RCC projection, chajjas,roofs,facia, colum etc by necessary preparation i.e scrapping, cutting, chiseling, derusting and cleaning exposed reinforecement, surfaces of damaged, loose RCC surfaces and applying one coat of cement slurry and filling the surfaces with cement concrete (1: 1-1/2: 3) using 12.5 mm graded crushed stone aggregate and reinforeced with welded mesh of weight exc 2Kg per sqm but n.exc 3Kg/sqm with or without facia and finished exc 5sqm each and thickness of RCC using coarse sand in patches area not each and thickness of RCC member n.exc 70mm at any height complete all as specified. Note : - Cost of formwork and welded mesh shall be deemed to be included.

M&L point wiring with 1.5 sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed FRLSH copper cable, 1100 volts grade, with multi stranded copper conductor drawn through and including non-metallic, rigid non mettalic PVC conduit (medium grade) concealed in wall / ceiling with and including 1.5 sqmm single core PVC insulated, multistranded, unsheathed, FRLSH copper conductor cable as continuous earth continuity conductor (green in colour) with pressed steel modular terminal boxes any size/module, conceiled on walls and fixed by neans of brass screws incl modular cover plates and cover frme any size/module, for mounting or housing switches, socket outlets, fan regulators, etc. including all other fixing accessories for the One light / fan /bell controlled by one, one way switch 5/6 Amps all as specified and directed. Note:- Blank plate of the same make are deemed to be included in the rate.

Description same as per Item No. 109.00 here in above but One 3 pin, 5/6 amps socket outlet point on independent board controlled by one, one way 5/6 amps switch complete all as specified and directed.

Description same as per Item No. 109.00 here in above but One 3 pin, 5/6 amps socket outlet point on same board controlled by one, one way 5/6 amps switch complete all as specified and directed.

M&L point wiring with 2.5 sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed FRLSH copper cable, 1100 volts grade, with multi stranded copper conductor drawn through and including non-metallic, rigid non mettalic PVC conduit (medium grade) concealed in wall / ceiling with and including 2.5 sqmm single core PVC insulated, multistranded, unsheathed, FRLSH copper conductor cable as continuous earth continuity conductor (green in colour) with pressed steel modular terminal boxes any size/module, conceiled on walls and fixed by neans of brass screws incl modular cover plates and cover frme any size/module, for mounting or housing switches, socket outlets, fan regulators, etc. including all other fixing accessories for one 15A socket point independent complete all as specified and directed.

S&F in Ceiling rose three terminals surface bakelite type, AC, 50 HZ, 230V complete all as specified and directed.

S&F modular switch 1 way 6 A , 1 module complete all as specified and directed.

S&F modular socket 6 Amps 2/3 pin combined 2 module complete all as specified and directed.

S&F switch modular type 16 A, 1 module complete all as specified and directed.

S&F socket modular type multipurposes 6/16 A, 2 module complete all as specified and directed.

Supply and fixing TV socket outlet complete all as specified and as directed.

S&F Telephone socket complete all as specified and as directed.

S & F for for Bell push modular 6 Amps single module complete all as specified.

S & F for Bell Electric Ding dong type suitable for operation on 230 volt 50 HZ A C supply complete all as specified and as directed

S & F for wall mounted LED tube light fitting 18 to 20 watts batten with, system efficency >= 120 lumens/watts for surface mounted, anodized extruded aluminium housing, high transmissitivity diffuser, high lumen ouput box type fitting, 230 volts and intregrated electronic driver connector block etc with warranty option of 5 years from date of installation complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed.

Supply and fixing wall mounted LED tube light fitting 10 watts comprising batten of extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver 10 W LED 2 feet long 110 lumens/watts ,THD less than 15% complete all as specified and directed.

S & F for Decorative wall mounted luminaire made out of polycarbonate with unbreakable globe suitable for LED bulb and provosion of LED bulb 9/10 watts 5 star rated complete all as specified and as directed.

M&L for Modular angular holder with LED Bulb 9/10 watts, 5 star rated complete all as specified and as directed

M&L for LED Bulk head fitings 6.5 to 10 watts designed for modern homes available with premium quality diffuser for glarefree light and easy to install snapfit installer, making good of surfaces complete all as specified and directed.

S & F LED bldg security light fitting 30 watts, with system efficacy >= 110 lm/W made up of pressure die cast aluminium housing with acylic cover as diffuser with IP-66 protection complete incl mounting pipe made of GI tubing 40 mm size 1M length bend into size with mounting brackets nut bolt and washers all as specified and directed.

S&F vertical DB TPN 4 way, IP43, IK09, metallic type double door 415V 50 Hz with provision for MCCB TP/TPN as incomer and MCB SP as outgoing incl blank plates, fixing flush to the wall incl connecting of XLPE cables as incomer and submain wiring as outgoing incl MCB SP 40 Amps "C" series - 04 nos complete all as specified and as directed

Supply & Fix MCB SPN 32 Amps current rating 'C' series 10 KA breaking capacity and of same make as that of item no. 128.00 complete all as specified and directed.

Supply & Fix MCB SP 6 to 32 Amps current rating 'C' series 10 KA breaking capacity and of same make as that of item no. 128.00 complete all as specified and directed.

S&F Exhaust fan non metalic single phase 230 volt of size 250 mm sweep with louver and of same make as that of item no. 128.00 all as specified and as directed

Supply and fix in ceiling fan 1200 mm sweep , BLDC fan,BEE rated 5 star ceiling fan or above with 350 RPM or above with power factor of >/=.0.90 for air delivery of 220 M/Cum minimum service value of 7 with electronic modular type fan regulator 2 module or with remote, complete all as specifeid and as directed.

M&L for Tubes, 'light grade,galvanised, with all fitting of size 40 mm ;laid in trenches, under floors,roads,along poles for protection of cable with all necessary fittings and sealing ends complete all as specified and directed.

Sub main wiring with 2 single core,10 Sqmm, PVC insulated PVC unsheathed stranded FR LSH copper conductor cable in and including PVC concealed/ surface conduit of earth wire with 1 x 10.0 Sq mm copper cable fixed along with the sub main in PVC conduit and connecting to earth dolly complete all as specified and directed.

M & L for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground vertically (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.50 mtr deep below normal ground level, connecting to GI earth wire 4mm dia by means of bolts, nuts, check nuts, and washers of galvanized iron or steel connected to earth test point including 15 mm dia. medium grade protection pipe for earth lead complete with charcoal and common salt including watering arrangement with galvanized iron pipe light grade 20 mm dia, PCC Chamber, CI frame and cover, MS funnel with wire mesh all as shown in electrical plate no 3 of SSR part I including excavation and earthwork in any type of soil/strata and testing on completion complete all as specified and directed. Note :- GI earth wire 4 mm dia and 15 mm dia protection pipe upto 7.5 mtr from earth plate is deemed to be included in rate quoted.

Supplying and laying un-reinforced precast concrete cable cover, Class LV, Type I, flat, size 250 mm x 150mm x 40mm complete all as specified and directed.

Supplying, laying, fixing, jointing and testing LT under ground XLPE insulated, galvanised steel strip or wire armoured heavy duty electric cable with aluminium conductor , multi stranded 1100 volts grade, cross-sectional area 25 sq. mm 4 core, ISI-7098 marked, with electric connection lugs, laid in trenches/under floor under PCC/interlocking tiles incl making good of surface with PCC/ cementing or fixed naked with walls/on poles/in ducts/in GI pipes etc complete all as specified and directed. Note: Excavation, earth work, sand cushioning, protection tiles/brick/block shall be measured and paid seperately.

M/S DADISA CONSTRUCTION

Goyal Construction

R. S. JAIN AND SONS

M/S Ashish Construction