Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹24.1 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹26.2 L+₹2.1 L (8.59%)Rejected-Finance 306 SHIV BARI MARG PANCHVATI NAGAR BATHINDA 151001 PB | BATHINDA | BATHINDA | PUNJAB | 151001 | L2 | Rejected-Finance Other than L1 | |
| 3 | L3₹26.4 L+₹2.3 L (9.63%)Rejected-Finance | L3 | Rejected-Finance Other than L1 | |
| 4 | L4₹31.2 L+₹7.1 L (29.3%)Rejected-Finance | L4 | Rejected-Finance Other than L1 |
Tender Value
Refer Docs
EMD Value
₹80,000
Closing Date
9 Nov 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) BHISIANA
GE (AF) BHISIANA PIN-151201
AS PER BOQ/PRICE SCHEDULE
2022_MES_557152_1
GE/BHI/T-10/2022-23
Open Tender
Civil Works
Item Rate
273 days
GE (AF) BHISIANA
AS PER NIT/TENDER DOCUMENT
6 documents required · 6 mandatory
₹500
GE (AF) BHISIANA
₹80,000
Yes
21 Dec 2022
12 Oct 2022
11 Nov 2022
12 Oct 2022
9 Nov 2022
26 Oct 2022
18 Oct 2022 - 22 Oct 2022
Amount
Taking down cement plaster on brick or stone masonry Including raking out joints, hacking for key scrubbing down with water etc complete all as specified and as directed by Engineer in Charge.
M&L for 15 mm thick plaster in 1:4 cement mortar and finishing the surface even and fair without using extra cement including applying two coat of cement base paint over a coat of primer after preparation of new plastered surfaces, complete all as specified and as directed by Engineer in Charge.
Material and labour for 15mm thick cement plaster in CM (1:6) on fair faces of brick or concrete surfaces and finishing the surface even and fair (without using extra cement) etc including applying two coats oil bound distemper (OBD) over a coat of primer and after preparation of plastered surfaces complete all as specified and directed.
S&F in repairs15 mm bore 3 in 1 brass CP wall mixer for mixing hot and cold water with L bend and hand shower 1.2 mte cp flexible pipe screwed down for iron pipe of make Prayag -Cat No-6680 or equivalent Make Mentioned as per Appx "A".
Material and labour for 15mm thick cement plaster in CM (1:6) on fair faces of brick or concrete surfaces and finishing the surface even and fair (without using extra cement) etc and Material & Labour for applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm ver and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. complete all as specified and directed.
M&L for 5 mm thick cement plaster in CM (1:3) on fair faces of concrete surfaces as in ceiling and finishing the surface even and fair (without using extra cement ) etc,and applying two coats of white wash on Ceiling, complete all as specified and as directed by Engineer in Charge.
Demolition Brick work built in Cement Mortar and in any Position including all Quoins, Arches and Pillars, etc., complete all as specified and as directed by Engineer in Charge.
M&L for Brick work with subclass B bricks, staright or curved on plan exc 6.00 mtr mean redius, built in 1:6 cement mortar complete all as specified and as directed by Engineer in Charge.
Material and labour for 15mm thick cement plaster in CM (1:4) on fair faces of brick or concrete surfaces and finishing the surface even and fair (without using extra cement) etc. complete all as specified and as directed by Engineer in Charge.
Material and labour for preparation of new plastered surfaces and applying two coats of cement base paint on walls, pillars cornices over a coat of alkali resistant primer of same make complete all as specified and as directed by Engineer in Charge.
M&L Preparing the plastered / unplastered old decorated surfaces of walls and applying one coat of white wash on wall surface complete all as specified and as directed by Engineer in Charge.
Ditto as per item No. 11 above but on ceiling complete all as specified and as directed by Engineer in Charge.
M&L peparation of old surfaces and applying one coats of plastic emulsion paint, interior grade of approved shade complete all as specified and as directed by Engineer in Charge.
M&L for providing 1mm thick plaster of paris putty (JK/ Birla wall care/ Berger) on wall surfaces finishing the surface even and smooth Complete all as specified and directed.
M&L for Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm complete all as specified and as directed by Engineer in Charge.
Material and labour for preparation of previously treated / untreated surfaces of chequered or interlocking tiles and applying two coats of indigo washable paint over and after applying a self priming coat of Indigo floor coat emulsion diluting the emulsion with 30-40% water complete all as specified and directed by Engineer-in-charge. Note: Paint Shall be applied as per Manufacturer Instructions.
M&L for preparation of old painted surfaces of eaves gutter and CI pipes any description, n. exc 30 CM girth including holderbats, distance pieces, etc.and applying a coat of japan black paint complete all as specified (length measured over bends, branches etc.) directed by Engineer-in-charge
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), and rubbish off the premises complete all as specified.
Material and labour Coloured Non Skid ceramic tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed or bedding in 1:6 CM complete all as specified and directed.
Material and labour for glazed ceramic coloured tiles of size 450x350x7mm thick thick on vertical surfaces set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles including 10mm thick cement plaster 1:4 CM to receive vertical tiles compete all as specified and as directed.
Material and labour for coloured joint free vitrified tiles 10 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM (1:4) for laying floor finishes complete all as specified.
Material and labour for coloured joint free vitrified Tiles 10mm thick (square/rectangular) on vertical surfaces as in skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick cement plaster in CM 1:4 to receive vertical tiles complete all as specified.
Material and labour for coloured joint free vitrified tiles 10 mm thick (square/rectangular) area of each tile exceeding 0.42sqm but not exceeding 1 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM (1:4) for laying floor finishes complete all as specified.
All as per item above but as in skirting including 10mm thick cement plaster 1:4 CM to receive vertical tiles compete all as specified and as directed.
Material and labour Coloured Non Skid ceramic tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed or bedding in 1:4 CM complete all as specified and directed.
M&L for 18-20 mm th granite of any type work ( table rubbed and polished) as in cooking platforms and like in cement mortar (1:4) including pointing in white cement 1:2, using marble dust with admixture of pigment to match the shade of granite stone including cutting and polishing laid on 15 mm thick screed bed in CM 1:4 set and jointed. including dismantling/demolition of existing floor/slab finishes.
S&F in repair Vitreous china premium/ 1st quality wash down water closet wall hung EWC white/ ivory/off white (closed pattern incl all ecessary accessories like rag bolts/ gel gasket etc. (excluding flushing cistern & flush pipe) complete in all respect all as specified.
Demolition of cement concrete in any description and in any position not otherwise specifically provided complete all as specified and directed.
M&L for Cement concrete 75 mm thick type B-2, 1:4:8 (40mm graded aggregate),finishing cement concrete complete all as specified and directed.
M&L for Machine pressed precast concrete inter locking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness with grey cement and pigment, M-35 grade complete all as specified and directed.
M&L for laying spreading/ levelling sand cushioning under interlocking tiles thickness n. exc 50mm including watering and consolidation complete all as specified and directed.
M&L for Cement concrete 100 mm thick type B-2, 1:4:8 (40mm graded aggregate),finishing cement concrete complete all as specified and directed.
M&L for cement concrete chequered tiles with grey cement &pigment 300 x 300 x 25 mm thick machine pressed set jointed and pointed in neat cement slurry over cement screed bed of mortar 15mm th in CM 1:6 complete all as specified and directed.
S&F in repairs 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls with and including MS/PVC clamps @ 2.0 mtr spacing with nut bolts/ nails including dismantling of old AC rain water/sewage stacks pipe etc..
Material and labour 15 mm dia tubes medium grade galvanised with all fitting and fixed to walls and ceilings or laid in floors including taking down and cleaning for removal from site etc complete all as specified.
M&L for 20 mm dia tubes, medium grade, galvanised with all fitting and fixed complete to walls and ceilings or laid in floors including taking down and removal from site complete all as specified and as directed by Engineer-in-charge.
M&L for Rotational moulded polyethylene water storage tanks 500 ltr capacity (cylindrical vertical with closed top) with 20mm tank nipple hoisted and fixed in position all as specified and directed including dismantling water tanks exc 250 ltr and nexc 500 ltr and removing from site complete all as specified and directed.
M&L for Rotational moulded polyethylene water storage tanks 1000 ltr capacity (cylindrical vertical with closed top) with 20mm tank nipple hoisted and fixed in position all as specified and directed including dismantling water tanks of capacity 1000 ltr and removing from site
S&F in repairs Ball valves 20mm high pressure of PTMT (Min weight 210 gms) with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed complete all as specified and as directed by Engineer in Charge.
S&F in repairs 20 mm ( Min weight 45 gms) GI Tank Nipple suitable for HDPE water tank complete all as specified and as directed by Engineer in Charge.
S&F in repairsHand shower (Health faucet) with8mm dia, 1.20mtr long flexible tube & wall hook fixed and installed complete all as specified and as directed by Engineer-in-charge. CAT No-ALD-573 of make Jaquar or equivalent Make Mentioned as per Appx "A".
S&F in repairs Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe & waste pipe) complete all as specified and as directed by Engineer-in-charge.
S&F in repairs vitreous china casket type EWC with flush tank and seat cover and all accessories, flags and bedded in white lead cement and outer end fixed and installed complete all as specified and as directed by Engineer-in-charge. CAT No-SLS-WHT-6851S of make Jaquar or equivalent Make Mentioned as per Appx "A".
Material & labour for appying one coat of water proofing indigo paint in any colour over concrete/stone surfaces of water fountains after preperation of surfaces and applying water proofing putty as required having area of 75 sqm andn.exc 100 sqm complete all as specified and as directed.
Material & labour for appying one coat of water proofing indigo paint in any colour over concrete/stone surfaces of water fountains after preperation of surfaces and applying water proofing putty as required having area upto 200 sqm and n.exc 250 sqm complete all as specified and as directed.
S&F in repair Factory made PVC cupboard sides, top & bottom frame (Each side measured Seperately ) , 30 mm thick (hollow) with a wall thickness of 5mm made out of extruded 5mm thick plain PVC sheet reinforced with 19 mm x 19 mm MS square tubes of 19 gauge thickness throughout the frame and mitre cut at two corners and jointed with two numbers 150mm long brackets of 10 mm x 10 mm square tubes and cupboard frame shall be fixed to the wall using 65/100mm long MS screws through the frame by using PVC fasteners. A minimum of 4 nos of screw to be provided for each vertical member and minimum of 2 nos of srew to be provided horizontal member & including leeping to front of frame with plain/printed/prelam PVC sheet etc complete as per manufacter's instructions and all as specified and directed included in the item. including dimantling old boarding complete all as specified. Note :- Making good the disturbed side plastering and Painting with existing colour (OBD )
S&F 5 mm thick termite proof, water proof and fire retartant plain PVC sheet jointed together & fixed on back side of Cupboard frame using solvent cement adhesive included in the item. including dimantling old boarding complete all as specified.
S&F Factory made PVC drawer of required size(Each side measured Seperately ) constructed by joining two nos 5 mm thick plain PVC sheet at the sides and bottom joint together with solvent cement adhesive complete all as specified and directed.
S&F 5 mm thick termite proof, water proof and fire retardant laminated PVC sheet jointed together at front side of Cupboard drawer frame using solvent cement adhesive complete all as specified and directed by Engr-in-charge.
S&F 5 mm thick termite proof, water proof and fire retartant plain PVC sheet exc 25 mm wide but not exc 75 mm wide fixed as a liping to sides of Cupboard frame using solvent cement adhesive complete all as specified and directed by Engr-in-charge.
S&F in repair chromium plated soap dish Make Cera or equivalent in approved make complete all as specified and as directed by Engineer in Charge.
S&F aluminium handle 150 mm cast type anodized complete all as specified and as directed by Engineer in Charge.
S&F in repair 10 ltr capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and andle including including mounting brackets complete ll as specified and directed.
S&F in repair china wash down water closet padestal pattern white excluding flush and fix to position, including connection to drain etc complete all as specified and as directed by Engineer in Charge.
S&F in repair plastic water closet seat white close pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified as direected.
S&F in repairs vitreous china WHB white flat back size 550 x 400 mm including brackets, 32 mm dia waste fittings brass CP for WHB with long shank screwed and fly nuts , flags and bedded in red lead cement and outer end fixed complete all as specified and as directed by Engineer-in-charge.
S&Fin repairs 15mm dia Pillar taps fancy type cast copper alloy, with capstan heads,chromium plated,screwed down high pressure, with or without lettered Hot or Cold with long screwed shanks and flu-nuts screwed for iron pipe, complete all as specified and as directed by Engineer-in-charge.
S&F in repairs 15 mm bore Stop Valve fancy type chromium plated with long shank and cup (concealed type) ,cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union, complete all as specified and as directed by Engineer-in-charge.
S&F in repairs 15 mm bore Stop/angle Valve fancy type chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union, complete all as specified and as directed by Engineer-in-charge.
S&F in repairs 15 mm bore Fancy type Chromium plated bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed by Engineer-in-charge.
S&F in repairs PVC connections 15 mm size with PTMT nuts of length 450mm complete all as specified and as directed by Engineer-in-charge.
S&F in repair 75mm dia PVC (SWR) floor trap, with grating including jointing with solvent cement complete all as specified and as directed by Engineer-in-charge.
S&F in repairs Brass Chromium plated shower rose 125 mm size with or without swivel joints,including fixing to steel pipe or union complete all as specified and as directed by Engineer-in-charge.
S&F in repairs single lever concealed divertor bath & shower 40mm (Forged body) PRAYAG cat No-8991 or equivalent in approved Make Appx "A" complet all as specified and as directed.
S&F in repair corner glass shelf assembly 300 size with CP railing make jaquar CAT NO ACN-CHR-1173 or equivalent Make Mentioned as per Appx "A"complet all as specified and as directed.
S&F in repairs sinks made of stainless steel l.00 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in ement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complet all as specified and as directed.
S&F in repairs sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; ncluding bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, complet all as specified and as directed.
S&F in repairs MS powder coated curtain rods of 20mm bore, including 02 Nos MS/PVC powder coated brackets in each curtain rod and 02 Nos PVC feneals (golden colour as per sample) with necessary screws and rowl plugs complete all as specified and as directed by Engineer in Charge.
S&F in repairs 2way bib cock with wall flange fixed and installed complete all as specified and as directed by Engineer-in-charge. CAT No-ALI-85041 of Jaguar or equivalent Make Mentioned as per Appx "A" complete all as specified and as directed by Engineer in Charge.
S&F in repairs vitreous china wall hung type WC with conceled flushing cistern and UF seat cover and all accessories, flags and bedded in white lead cement and outer end fixed and installed complete all as specified and as directed by Engineer-in-charge. CAT No-LYS-WHT-38951 of Jaguar or equivelent in approved make complete all as specified and as directed by Engineer in Charge.
S&F in repairs vitreous china wall hung type urinal with sensor and all accessories, fixed and bedded in white lead cement and outer end fixed and installed complete all as specified and as directed by Engineer-in-charge. CAT No-URS-WHT-13255 & SNR-CHR-51097 of make Jaquar or equivalent Make Mentioned as per Appx "A" complete all as specified and as directed by Engineer in Charge.
Dismantling of wrought iron or mild steel work of any description not other wise provided for complete allas specified and as directed.
Dismantling ceiling boards (fibre, pulp, insulation etc.) any thickness, including cover fillets & snap grid frame work of any description, complete all as specified and as directed by Engineer in Charge..
S&F of anodised aluminium snap grid of size 605 x 605mm frame work for false ceiling incl 2mm dia GI wire for hangers where ever reqd all as specified.
M&L perforated partical board for insulation & accoustic purpose 60cmx60cm and 12mm thick fixed with nails to frame work on snap grid and applying two coats of oil bound distemper over a coat of alkali resistant primer on exposed surfaces and all as directed.
Dismantling Asbestos cement (corrugated, semicorrugated, etc.),fibre sheets in roof coverings any gauge, thickness and in any position including Nainital or similar pattern roof coverings complete allas specified and as directed.
M&L for Pre-painted galvalume zinc coating GI Based corrugated steel sheet 0.45 mm thick of an colour having tensile strength of 550 Mpa as in roof coverings / clading to wall, fixed with self tapping screws complete all as specified and as directed by Engineer in Charge.
M&L for Bitumastic gola, with 80/25 bitumen and coarse sand mixture. 1:3 by weight, 8cmx8cm at the junction of roofing to vertical surfaces complete all as specified and as directed by Engineer in Charge.
Material and labour for preparation of new steel surfaces of any description not otherwise described over 10cm width or grith and applying two coats of synthetic enamel paint over a coat of red oxide primer over new surfaces complete all as specified and as directed by Engineer in Charge.
Taking down Chowkhats or frames not exc 1.5 Sqm each (without taking off shutters from the frames) complete all as specified and as directed by Engineer in Charge.
Taking down shuttter of any description exc 1 sqm but n exc 2 sqm each complete all as specified and directed.
Taking down Chowkhats or frames exc 1.5 Sqm but n exc 4 sqm each (without taking off shutters from the frames)complete all as specified and as directed by Engineer in Charge.
S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm plain coloured PVC sheet reinforced with MS square tube, in same opening as per specification and drawing .
Factory made solid panel PVC door shutter 30mm thick (stile), consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, supplying & fixing in the frame at site as per specification and drg.
S&F of Anodised alluminium frame for doors, windows, ventilatrs with one or more rebates includingAluminium beading, rubber bead, Tension rods joining cleat for fixing etc, complete all as specified and as directed by Engineer in Charge.
S&F of anodised aluminium door shutters, alluminium sections weighing .55 kg/M including necessary joining cleats , glazing clips, rubber neoprene packing, handles 2 Nos in each door , hinges anodised aluminium snap beading screws etc, with powder coating of any colour (thickness of powder coating not less than 50 micron) complete all as specified.
S&F in repairs aluminium powder coated window/door grills , mesh size 50mm x50mm thickness 3.8mm complete all as specified and as directed by Engineer in Charge.
SF Powder coating (Powder coating not less than 50 micron)Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, nodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and as directed by Engineer in Charge.
S&F 300mm mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed by Engineer in Charge.
S&F 100mm Butt hinges medium weight, cold rolled mild steel complete all as specified and as directed by Engineer in Charge.
S&F 200mm Aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and as directed by Engineer in Charge.
S&F 300 mm Mild steel Sliding door bolts plate type stove enamelled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts,four on bolt plate and two on staple plate and fixed complete all as specified and as directed by Engineer in Charge.
Material and labour for Factory made PVC cupboard shutter of 30 mm thick consisting of frame made out of MS tubes of 19 gauge thickness and size 19mm x 19mm covered with panneling of 5mm plain plus 5mm thick prelaminated PVC sheet fitted in the MS frame and sealed to the front stiles and rails which should having 20mm x15mm wide PVC biding and attached to back stiles and rails (which should have a 5mm 45 degree bend portion as beding) and decorative PVC beding is used on the front side of pannel externally impart perfect finish to the shutter and joint together with solvent cement adhesive complete all as specified and directed including Takin out/ dismantling existing Board complete all as specified and as directed by Engineer in Charge.
Material and labour for , Factory made PVC centre partition shelfs of 25mm thickness consisting of MS Frame made out of MS tubeof 19 guage thickness and size of 15x15mm inserted all around the hollow profile section and insert 15mmx15mm MS tube in the centre of this section and liped with 10 mm (5mm x2 ) thick plain PVC sheet at the top and bottom and 20mm wide and 15mm thick on sides using solvent cement adhesive and fixed with concrete wall/ brick wall by necessary holding arrangements including Takin out/ dismantling existing Board complete all as specified and as directed by Engineer in Charge.
S&F in repair 40 mm wide Mild Steel telescopic channel fixed to drawer with screws complete all as specified and as directed .
M&L Continous piano hinges stainless steel ,bright finish width of flaps when open 40 mm complete all as specified and directed by Engr-in-charge.
Supply and fixing Chromium plated Stainless Steel handles , 100 mm size polished bright.complete all as specified and directed by Engr-in-charge.
S&F in repair mortice latch with two levers of aluminium anodised body 65 mm long complete as all specified and directed by Engineer in Charge.
Supply and fixing Magnetic catcher for cupboards complete as all specified and directed by Engineer in Charge complete all as specified and as directed by Engineer in Charge.
S&F 5.5 mm thick tinted glass ordinary quality and glazing with oil putty or with wooden/ alluminium shutter (supplied alongwith shutter) exc 0.50 sqm each complete all as specified.
M & L 12 mm thick both sides prelaminated Particle board, exterior grade, fixed with screws to frame work in cup board shutters, partitions, shelves etc. complete allas specified and as directed.
M&L for Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed as in repairs complete allas specified and as directed.
S&F in repairs Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg of aluminium (extruded section body) and fixed complete all as specified.
S&F Butt hinges Aluminum 100 mm type C21 complete all as specified and as directed
S & F Pressed steel frames for doors with one or more rebates including necessary fixing lugs,hinges, lock strike plate, etc of size 125 X 60mm including PCC (1:3:6) type C-1 using 20mm graded aggregate as in back of frame complete all as specified and directed .
S & F Pressed steel frames for doors with one or more rebates including necessary fixing lugs,hinges, lock strike plate, etc of size 105 X 60mm including PCC (1:3:6) type C-1 using 20mm graded aggregate as in back of frame complete all as specified and directed .
Supply and fixing IInd class hard wood (Hollock) 35mm thick plain framed, factory made panelled shutters (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS-1003 (part – I), kiln seasoned and chemically pressure treated complete.
Supply and fix glazed and skelton shutter 2nd class soft wood 30mm thick,open rebated and prepare to receive glass, gauge etc. (without sash bars) edge of framing plain chamfered or rounded fitted with cut and mitred beads for securing complete.
S&F rolled mild steel as in cooler stands (framed/unframed) purlins, rafter,trusses, rails and wind tie etc (Tee, Angle, channel or flat sections) incl distance pieces etc of grade Fe 410-W quality A including fixing with fastners at site complete all as specified and as directed.
M/s Luxmi Constructions
STELLAR PROJECTS
Aman Enterprises
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .