Construction of 08 roomed double story building at HSS Zainpora Shopian.

Earth work in bulk excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil

Filling available excavated earth (exluding rock) in trenchs, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidated each doposited layer by ramming and watering, lead upto 50 m lift upto 1.5m

Providing and laying of stone soling (hand packed) including watering,dressing and ramming with all carriages loading,unloading and stacking etc.

Providing and laying in position cement concrete 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level. Mud mat.

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)Including cost of material involved complete.

Dry random rubble masonary with hard stone in foundation and plinth: with bond stone including carriage.

Providing & laying in position cement concrete of specified grade including curring but excld. the cost of centring and shuttering all work upto plinth level 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) Including cost of material involved complete.

Providing and laying in position reinforced cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) Including cost of material involved complete.

Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) Including cost of material involved complete.

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas

, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) Including cost of material involved complete.

Centering and shuttering including strutting , proping etc. and removal of form for : foundation, footings, basis of columns etc, for mass concrete.

Centering and shuttering including strutting , proping etc. and removal of form for : lintel beams , plinth beams ,girders, bressumers and cantelevers.

Centering and shuttering including strutting , proping etc. and removal of form for : columns , plillars , piers, abutments, posts and struts.

Centering and shuttering including strutting , proping etc. and removal of form for : Suspended floors, roofs, landings , balconies and access platforms.

12mm Cement Plaster of mix 1:4 (1 cement:4 fine sand) outer walls, Inner Walls.

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in :Cement mortar 1:4 ( 1 cement : 4 coarse sand) including Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level all carriages complete

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in substructure (for septic tank) including curing in :Cement mortar 1:4 ( 1 cement : 4 coarse sand) including all carriages complete

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick, Pre-laminated particle board with decorative lamination on both sides, Grade I, Type II IS : 14587

Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. With ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. 35mm

Providing and fixing 35 mm thick wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge : First Class Kail wood

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc including priming coat with approved steel primer all complete. Fixed to openings / wooden frames with rawl plugs screws etc.

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick, 4 mm thick glass pane (weighing not less than 10 kg/sqm) including beading for glass support.

Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour and shade with necessary screws etc complete. 125mm

Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour and shade with necessary screws etc complete. 75mm

Providing and fixing ISI marked oxidized M.S. tower bolt black finish, (Barrel type) with necessary screws etc complete. 150x10 mm

Providing and fixing ISI marked oxidized M.S. tower bolt black finish, (Barrel type) with necessary screws etc complete. 100x10 mm

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete in sub structure and DPC level Thermo-Mechanically Treated bars of grade Fe-500D or more.

Providing and fixing ISI marked oxidized M.S. sliding door bolts with nuts and screws etc complete: 300x16mm

Providing and fixing ISI marked oxidized M.S. eye hook with necessary screws eqivalent

6mm Cement Plaster of mix 1:3 (1 cement:3 fine sand) to ceiling.

Providing and applying Plaster of Paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm

Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1: 4( 1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigment etc. complete.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete

Finishing with Deluxe multi surface paint system for interiors and exteriors using primer as per manufacturers’ specifications: Two or more coats applied @ 1.25litre/10sqm over an under coat of primer applied @ 0.75litre/10sqm of approved brand and manufacture

Finishing walls with water proofing cement paint of required shade on New Work ( two or more coats applied @ 3.84kg/10Sqm

Providing and fixing wood work in frames of doors, windows, clerestory windows & other frames, wrought framed & fixed in position with holdfast lugs or with dash fasteners of required dia and length. First class kail wood.

Providing and applying priming coat with ready mixed grey or pink primer of approved brand and manufacture on wood work ( hard or soft Wood)

Painting with synthetic enamel paint of approved brand and manufacturer of required colour to give an even shade. Two or more coats on new work over an under coat of priming coat in wood work.

Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. (a) 15 mm nominal dia

Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required :White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps.

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C waste fittings complete:32mm dia

Providing and fixing PVC P&S Trap for water closet or wash basin including PVC Wate fittings complete.

Providing and fixing PVC floor trap including PVC waste fittings complete. 100mm

Providing and fixing PVC floor trap including PVC waste fittings complete. 75mm

Providing and fixing of soil, waste and vent pipes S&S PipesType-B

PVC Cowell 50mm dia

Providing and fixing of PVC stay and clamps for PVC Pipes

Providing and fixing of PVC bends of required degree. 100mm

Providing and fixing of PVC bends of required degree. 75mm

Providing and fixing of Tee Junction of required degree. 100mm

Providing and fixing of Tee Junction of required degree. 75mm

Providing and fixing of PVC Reducer 100-75 mm dia.

Providing and filling the joints with spun yarn cement slurry and cement mortar 1:2 (1 cement : 2 fine sand) in S.C.I / C.I pipes 100 mm dia. Pipe

Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete: 100 mm dia. Pipe, Sand cast iron S and S as per IS:3989

Providing and fixing plain bend of required degree: 100 mm dia. pipe Sand cast iron S and S as per IS:3989 PVC or equivalent.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet,outlet and overflow pipes but without fittings and the base support for tank. (Triple Layer)

Providing and fixing water closet squatting pan (Indian type W.C.pan ) with 100 mm sand cast Iron 'P'or 'S' trap, 10 liter low level white PVC. flushing cistern, including flush pipe (of approved make ) with manually controlled device (hand lelever) conforming to IS:7231, with a llfitting sand fixtures complete, including cutting and making good the wall sand floors wherever required White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge. Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc. PN-16 pipe, 16mm OD(SDR-7.4)

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge. Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc. PN-16 pipe, 20mm OD(SDR-7.4)

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge. Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc. PN-16 pipe, 25mm OD(SDR-7.4)

Providing and Fixing PPR Unions

PPR Union 16mm

PPR Union 20mm

PPR Union 25mm

Providing and fixing of CP fittings of Jacquar, Cera or equivalent including all fixtures complete as directed by Engineer In Charge

Towel Rail

Bib Cock

Angle valve

Soap Case

Ball Valve

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providng and Fixing of Geysers 50Litre 2000watt storage water heater (white) including all fittings and fixtures make : venus, jacquar, racold or equivalent.

Structural steel welded in built up sections trusses and framed work incld cutting,hoisting fixing in positon and applying a priming coat of approved steel primer incl. painting all complete. Welded.

Providing and fixing of Aluminium windows, doors ventilators made out of 50mm x 45mm section of shutters including rubber gascuts, aluminium beeding fitted with 5mm glass and framework of aluminium 100 x 50 mm section fitted with all required standard hardware.

Providing and fixing high rib color coated corrugated galvanized PPGI sheets 1000-1020mm cover width 28-35mm high crests at 250-255mm TCT (total coated thickness) high tensile SMP galvalumesteel with silicon modified polester coating of approved colour of total thickness of 35 micron comprising 20 micron exterior coat of SMP over 5 micron polyster back coat over 5 micron primer coats on both surfaces including side and end lap andusing 8mm galvalume hex self drilling fastener on each crest of sheet for connection with purlins and seam bolts at 300mm centers on all side and end lapps etc. (measured for unit of laid area) 0.5mm thick ( TATA, JSW or EQ brand) i/c all carriages/H/Load i/c 60cm wide ridges and valleys wherever required i/c all fittings and fixtures in roof sheeting (Tile Profile).

Providing ridges or hips of width 60 cm over all width plain G.S sheets fixed with polymer coated J or L hooks.bolts and nuts 8mm dia G.I. limpet and bitumen washers complete 0.50 mm thick with zinc coating not less than 275 gram/m2

Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6mm, with 40mm dia, steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarsesand : 8 graded stone aggregate 40 mm nominal size),inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design 450 x 450.

Carriage for Different Materials.

Crushed aggregate average lead of 20Kms.

Sand average lead of 20 kms.

Disposal lead of excavated earth