GE (W)/HSR-50/2024-25 SPL REPAIR TO CTL ROOM AND VC ROOM AT HISAR MIL STN

Amount

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets and frame work complete all as specified and directed.

S&F PVC 5mm thick solid PVC of wall lining/panelling of wood grain printed colour on one side and inclusive of solvent cement and fixing at site inclusive of framework as required and as per specifications and drawing complete all as specified and directed.

S&F windows roller blind made of several horizontal slats of fibre cloth (wooden textured) along a roller and inclusive of all connected items complete all as specified and directed

M&L15mm thick cement plaster on the fair face of brick or concrete surface in cement mortar 1:6 finished even and smooth without using extra cement, complete all including taking down of existing plaster as specified and directed.

M&L15mm thick cement plaster on the fair face of brick or concrete surface in cement mortar 1:4 with WPC@ 200 ml per bag of cement finished even and smooth without using extra cement, complete including taking down of existing plaster all as specified and directed. Note :- The quoted rates are inclusive of WPC.

M & L for preparation of newly plastered surface of walls incl scaffolding and applying two coats of OBD using roller over two coat of 1mm thick wall care putty on wall complete all as specified and directed.

M & L for complete removal of existing treatment of old surface of any layer using mechanical sander with internal dust extraction system and applying two coats of OBD using roller of make: berger/Shalimar/Asian Paints over two coat of 1mm thick wall care putty of same make on wall complete all as specified and directed.

M&L preparing new plastered surfaces of walls and applying three coat of cement base paint and complete all as specified and directed.

M&L for preparation of old decorated plastered or unplastered surfaces of walls by brooming down or steel wire brushing, scrapping down smoke soots, moulds, moss and efflorescent salts and trading oil & greasy spots including cornices etc using mechanical sander with internal dust extraction system and applying one coat of cement base paint, white or tinted using roller complete all as specified and as directed.

Taking down chowkat or frame with shutters area exe 1.5 sqm but not exe 4 sqm each (without taking off the shutters from the frame) incl cutting holes for hold fast and making good the disturbed surface using 10 mm thick plaster in CM in 1:4 and finishing the same matching to adjacent surfaces complete all as specified and directed.

M&L Powder coated Aluminium window Shutters , Aluminium Section weighing 0.55 Kg/Rm incl necessary joining cleats , glazing clps , rubber neoprene , packing , handle 2 Nos, locking systems ,locking systes , hinges , anodised aluminium snaps bidding , screws, including aluminium decogrill with SS Mosquito wire mesh in each window shutter opening etc complete all as specified and directed.

S&F sheet glass 5.5 mm thick ordinary quality in squares exc 0.5 sq m including 25 micron black film and complete all as specified and directed.

M&L Powder Coating (minimum thickness of powder coating 50 micron) Aluminium Door,Windows ,ventilators, with one or more rebates including joining cleat for fixing etc complete all as specified and directed.

M&L for coloured met/glossy finish ceramic tiles 8-10 mm thick of size 600mm x 1200 mm in Floors etc set & jointed with 10-12 mm thick tile adhesive of same make and flush pointed with matching colour Epoxy , including demolition of existing tiles and making the surface even to receive tile adhesive using avg 10mm thick screed bed in cement mortar 1:4 complete all as specified and directed.

Description all as per item No 15.00 above but in skirting and making the surface even to receive tile adhesive using avg 10mm thick cement plaster in cement mortar 1:3 complete all as specified and directed.

M & L for 12 mm thick frosted toughned glass doors of reqd size incl creating a design and pattern on full portion of toughened glass as per user requirement incl locking arrangement, premium large size handles:2 nos on each door , and all necessary fittings and masonary works for fixing/ functioning of the door including taking down of existing door and making the surface even and finishing the same and complete all as specified and directed.

S&F 5mm thick Solid Wood grain printed PVC wall panelling sheet incl of solvent cement and fixing on site on frame as per specifications incl 5mm thick PVC sheet fillet of width 35 mm for wall panelling inclusive of fixing on to wall to make PVC frame grid to receive each sheet as per as per specifications complete all as specified and directed.

M& L for 12mm thick gypsum board as per approved profile of ceiling incl L Shape GI perimeter section 22mm x22mm x 0.45 mm and GI main T Cross runner section 24mmx 38mm x 0.33 mm in grid reqd as per approved profile of GI incl of fixing the GI board on frame with self tapping screw,including of fixing the main sections to the structure soffit with approved adjustable hangers of MS flat 30 x 4mm at distance n exc 1 m in both directions and at every turning locations incl necessary welding, screws and approved steel members for the same and filling all the joints and screw marks with the tape and making the surface smooth with putty and finishing the surface with two coats of OBD over a coat of primer and complete all as specified and directed. Note: ceiling plan area (length x width) shall only be measured for payment purpose

Dismantling floor hearth or wall tiling incl cement mortar bedding complete all as specified and directed.

M&L 20 mm thick Z Black Granite work (table rubbed and polished) in steps,staircase treads and risers, jambs,pillars,window-cills, cooking plateform, and like in cement mortar(1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and complete all as specified and directed.

M&L for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed.

Taking down carefully copper/ Aluminium point wiring ( light, fans, socket, power socket) complete including taking out existing unserviceable terminal boxes and conduit with switches/sockets/fan regulators and fittings such as ceiling roses, pendants, tube lights fittings lamp holders, brackets light fittings, rectangular blocks DB MCCB etc and making good disturbed surface of wall/ floor etc to match with the existing the surface etc complete all as specified and directed.

Material and labour for point wiring with 1.5 sqmm (22/.3mm) PVC insulated and unsheathed FRLS single core multistranded copper conductor for one light/fan/bell point in and including PVC rigid non metallic concealed conduit 19/20 mm dia medium duty, ISI marked to be terminated & including pressed modular steel boxes & cover plate of module as required on site.including 1.5 sqmm (22/.3mm) PVC insulated and unsheathed FRLS single core multisrtaned copper earth continuity conductor controlled by one switch and/or one regulator complete including repairing the surfaces in Cm 1:3 and finishing the surface as per existing treatment complete all as specified and directed.

Description all as per item No 24.00 above but One three pin 5 Amp socket outlet point on independent board controlled by one nos, one way switch on independent board complete all as specified and directed.

Description all as per item No 24.00 above but One three pin 5 Amp socket outlet point on same board controlled by one nos, one way switch on same board complete all as specified and directed.

Description all as per item No 24.00 above but point wiring with 2.5 sq mm single core FRLS cables and earth continuity wire with 2.5 Sq mm single core cable for one 3 pin 15 Amps socket out let point controlled by one nos, one way switch on independent board complete all as specified and directed.

S&F Modular switch 1 way 6A 1 module Single pole, one way, 230 volts all as specified and directed.

S&F Modular switch 1 way 16A 1 module all as specified and directed.

S&F Modular socket 6A -2/3 pin combined 2 module type 230 volts AC complete all as specified and directed.

S&F Modular socket 6A/16A -2/3 pin combined 2 module type AC complete all as specified and directed.

S&F Modular lamp holder, insulated body with back plate suitable for batten fittings and complete all as specified and directed.

S&F Modular ceiling rose surface bakelite 65mm x 50mm, 3 terminals with back plate etc complete all as specified and directed.

S&F modular fan step regulator 120W-2 module suitable for 1200/1400 mm sweep ceiling fan etc complete all as specified and directed.

S & F for wall mounted LED tube light fitting 20 watts batten not less than 120 lumen/watt for surface mounted, high transmissitivity diffuser, high lumen output box type fitting, 230 volts and intregrated electronic driver connector block etc complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed.

S&F Sheet metal enclosure distribution board SPN,8 way, double door powder coated, protection class IP-42 suitable for mounting MCB DBs confirming to IS-13032, IS-8632,BS5484 with min 200 Amp raiting copper bus bar complete all as specified and directed.

Supply and fixing in repair MCBs SP 6 to 32Amps, B-curve, 240 volts, 10 KA rupturing capacity, IS-8828 marked, of the under mentioned type and rating and fixing in DBs (DBs Catered separately in this schedule) complete all as specified and directed. Note : Make of the MCB should be the same as that of DB

Supply and fixing MCBs SPN 40 Amps, 240 volts, 10 KA rupturing capacity, IS-8828 marked, of the under mentioned type and rating and fixing in DBs (DBs Catered separately in this schedule) complete all as specified and directed. Note : Make of the MCB should be the same as that of DB

Supply & Fixing sheet metal enclosures with socket plug top and MCBs single pole and neutral enclosure with a 2 pin and earth plug and socket complete with one SP MCB of 20 Amp rating 240 volt complete all as specified and directed.

Supply & fixing LED light 36 watt Recess Mounting type, white/warm white with mounting arrangement (Recess suitable for 2x2 Grid Hanging) Sheet aluminium housing with high quality LGP and PMMA diffuser, Separate HPF driver suitable for armstrong and grid ceilling LED 240 volt alongwith fixing arrangements completed all as specified and directed.

S&F Warm white LED Strip 30 Watt, 240 Volt surface light fitting indoor decorative type LED fitting suitable for fall ceiling alongwith fixing arrangements complete all as specified and directed.

S&F Warm white LED Strip 30 Watt, 240 Volt with blue colour illumination surface light fitting indoor decorative type LED fitting suitable for fall ceiling alongwith fixing arrangements complete all as specified and directed.

S&F Warm white LED Strip 30 Watt, 240 Volt with red colour illumination surface light fitting indoor decorative type LED fitting suitable for fall ceiling alongwith fixing arrangements complete all as specified and directed.

S&F Round type series downlight of 18 watt with low depth, powder coated glare finish to deliver warm white/cool white illumination with optimized heat sink for efficient dissipation suitable for fall ceiling complete all as specified and directed.

S&F Square type series downlight of 18 watt with low depth, powder coated glare finish to deliver warm white/cool white illumination with optimized heat sink for efficient dissipation suitable for fall ceiling complete all as specified and directed.

Taking down old unserviceable submain wiring including fitting & fixtures and making good of the surface to match with the existing complete all as specified and directed.

M & L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLS cable with stranded copper conductor of size 6 Sq mm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessories ISI marked heavy duty of suitable size including concealed in wall etc one run of PVC insulated with 6.0 Sqmm (nominal area) stranded copper conductor FRLS cable as earth wire complete all as specified and as directed. Note:- Three runs of 6 sqmm cable for phase, two run of 6 sqmm cable for earthing and one run of PVC conduit will be measured as one unit.

M & L for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground vertically (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.50 mtr deep below normal ground level), connecting to GI earth wire 4mm dia by means of bolts, nuts, check nuts, and washers of galvanized iron or steel including 15 mm dia. medium grade protection pipe for earth lead complete with charcoal and common salt including watering arrangement with galvanized iron pipe light grade 20 mm dia, PCC Chamber, CI frame and cover, MS funnel with wire mesh all as shown in electrical plate no 3 of SSR part I including excavation and earthwork in any type of soil/strata and testing on completion complete all as specified and directed. Note :- GI earth wire 4 mm dia and 15 mm dia protection pipe upto 7.5 mtr from earth plate is deemed to be included in rate quoted.

M/S RAJESH KUMAR & SONS (BID ID -3159625)

m/s krishna engineers1 (BID ID -3154547)

PRINCE CONSTRUCTION (BID ID -3159972)

m/s Ravindra Traders (BID ID -3159012)