CERTAIN REPAIRS TO ALUMINIUM DOOR WINDOW JOINERY PLUMBING SANITARY FITMENTS INCLUDING PETTY REPAIRS IN OTM ACCN AND EM INSTALLATIONS AT 2003 STN AND REPAIR MAINT OF 500 KLD AND 300 KLD STP PLANTS AT AFSSR UNDER GE AF GURGAON

Amount

Taking down Shutters of any description exc 1 sq. m and n exc 2 sqm each complete all as specified and as directed.

Taking down Chowkat or frames with shutters(without taking off shutters from the frames) exc 1.5 but n.exc 4.00 sqm each complete all as specified and as directed.

Taking down and romoving Chowkats or frames not exc. 1.5 sq.m with shutter (without taking off shutters from the frames) complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premise complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floors and paving n. exc. 15 cm thickness (below or above ground level) complete all as specified and as directed.

Taking down cement plaster on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and as directed. (Note the area includs in this up to 4th stories building.)

S&F for Anodised powder coated aluminium frame for doors, windows, ventilators and fixed type partition wall with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed.

S&F for 5.5 mm Sheet plain/tinted glass, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane, rubber beading, glazing clips and all necessary fittings complete all as specified and as directed.

S&F for 12 mm PVC board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination,fixed with screws to timber frame work complete all as specified and as directed.

S&F for powder coated Anodised aluminium door and/or window/ventilator shutters(side hung or fixed type), aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges,anodised aluminum snap beading screws etc. complete all as specified and as directed. (thickness of powder coating not less than 50 micron)

M&L for Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, complete all as specified and as directed.

S&F Framed mild steel work as in door frame including pintel hinges, stops, hand made sliding bolts etc. complete conforming to Fe-410-0 or Fe-310-0 complete all as specified and as directed.

S&F in repairs Factory made solid panel PVC door shutter 30mm thick(style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall becovered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottim rail. Penelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and as directed.

S&F PVC Door Frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinfoced with MS Square tub, suppling & fixing in opening as per specification and drawing complete all as specified and as directed.

S&F 100mm Butt hinges, meduim weight, cold relled stainless steel and fixed complete all as specified and as directed.

S & F for aluminium anodised, barrel tower bolts of extruded section 125mm long and fixef complete all as specified and as directed.

S&F 4mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and as directed.

S&F 30 mm thick 2nd class Hard wood Glazed and skelton shutters, open rebated and prepared to receive glass, guaze etc, divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars any numbers, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securiing glass etc, sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.20(a) and fitted to chowkats complete all as specified and as directed.

S&F 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both side complete all as specified and as directed.

S & F for Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed.

S&F 250mm Aluminium alloy, anodised, sliding door bolt with hasp, staple(bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of exctruded sections or cast aluminium alloy and fixed complete all as specified and as directed.

M&L Glazed coloured ceramic tiles in vertical surfaces 450x350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick in cement mortar 1:3 on fair faces of brick work or concrete surface as backing coat coat of dado/skirting etc complete all as specified and as directed .

M&L for Non skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick Screed bed or bedding layer of mortar for lying floor finished in Cement Mortar 1:4 complete all as specified and as directed.

M&L for Non skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick Screed bed or bedding layer of mortar for lying floor finished in Cement Mortar 1:4 complete all as specified and as directed.

Demolition of Cement Concrete in sunken floors and pavings exc 15 cm thickness above or below ground level and disposing the rubbish to a distance exceeding 50 Mtr but not exceeding 100 Mtr away to low lying areas complete all as specified and as directed.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in floors in CM 1:3 with water proofing compound, finishing even and smooth without using extra cement complete all as specified and as directed

Supply only integral water proofing compound complete all as specified and as directed.

M&L for applying evenly a coat of epoxy compound of Dr Fixit or equalvent as approved by Engrineer-In-Charge as in sunken portion of WC including cleaning surfaces complete all as specified and as directed.

M&L for Cement concrete 1:7:12 type F-2 (using 40mm graded brick aggregates) as in sunken slab, filling and mass concrete complete all as specified and as directed.

M&L for 40mm thick PCC 1:2:4 type B-1 (using 20mm graded stone aggregates) as in floor finishing even and smooth without using extra cement complete all as specified and as directed.

Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar complete all as specified and as directed.

M & L for 20mm thk prepolished granite stone slabs in steps, jambs,pillars,windows cills,cooking platforms, floors and the like laid over cement mortar 1:4, 15 mm thick set and jointed in neat cement slurry and pointed in white cement with pigment to match complete all as specified and as directed.

M&L for Rough cast plaster on brick walls consisting under coat of cement and sand mortar 1:3 not less than 10mmm thick and while it is still in plastic state the rough cast mixture consisting of crushed stone or fine gravel mixed of size 6mm with coarse sand and cement in the ratio 1:1:1 shall be applied and finish even complete all as specified and as directed.

M&L for 25mm thick Cement concrete 1:2:4 type B-O(using 12.5mm graded aggregate) as in flooring, finished surfaces even and smooth without using extra cement complete all as specified and as directed.

Taking up or down steel tubing 15 mm bore, and connections, including cleaning for re-fixing or removal to store in repairs complete all as specified and as directed.

Taking up or down steel tubing 20mm bore, and connections, including cleaning for re-fixing or removal to store in repairs complete all as specified and as directed.

S&F 15 mm bore tubes CPVC all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.

S&F 20 mm bore tubes medium grade galvanised with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.

S & F in repairs 15mm bore Bib taps, fancy type chromium plated cast copper alloy with crutch or butterly handle, screwed down, screwed with cup for iron pipe or for brass ferrule and fixed complete all as specified and as directed.

S & F in repairs 15mm bore Stop Valve/ angle valve fancy type chromium plated , cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends with cup for iron pipe or for unions and fixed complete all as specified and as directed.

S & F in repairs 15mm bore Pillar taps central hole Basin mixer with regular spout without popup waste system with 450 mm long braided hosedd 20 mm carttridge size fancy type, cast copper alloy, chromium plated, complete all as specified and as directed.

S & F in repair 15mm bore brass CP wall mixer with provision for overhead shower with 115mm long bend pipe on upper side, connecting & wall flange fancy type, cast copper alloy,chromium complete all as specified and as directed.

S & F in repair single towel rall 450mm long fancy type chromium plated fixed with PVC plug and steel screw complete all as specified and as directed.

S & F in repair towel ring round with round flange fancy type cromium plated fixed with PVC plug and steel screw complete all as specified and as directed.

S & F in repair soap dish, vitreous China white, approximate size 160x 160x90mm complete all as specified and as directed.

M & L in repair for hand shower (and/or health faucet) with 8mm dia 1.20 mm lonf flexible tube and wall hook complete all as specified and as directed.

S & F in repair for PVC conection 15 mm size with PTMT nuts of length 450 mm long complete all as specified and as directed.

S & F in repair Swivel shower of PTMT any colour for fixing with 15mm pipe. (Minimum weight 40gms complete all as specified and as directed.

S & F in repairs Vitreous Chine wash down water closet pan single piece with UF seat cover hinges, fixing accessories set, cistern fitting of size 365x655x760 with S trap complete all as specified and as directed.

S&F in repair vitreous China wash basin white, flat back size 550x400mm including S&F 32mm dia waste coupling, waste PVC pipe complete all as specified and as directed.

S&F in repair sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed.

M&L for 15mm thick Rendering on fair faces of brick work or concrete sureces in Cement Moratar 1:6 finished surface even and smooth without using extra cement complete all as specified and as directed.

M&L for 15mm thick Rendering on fair faces of brick work or concrete sureces in Cement Moratar 1:4 finished surface even and smooth without using extra cement complete all as specified and as directed. Note the area includs in this up to 4th stories building

M&L for 5 mm thick Rendering on ceiling surface fair faces of brick work or concrete sureces in Cement Moratar 1:3 finished surface even and smooth without using extra cement complete all as specified and as directed. Note the area includs in this up to 4th stories building or Ht of ceiling upto 9.00 m

S& F in repair stain less steel decorative cutrain rod of 25 mm bore inluding 2 nos steel finale and bracket 02 Nos etc and fixed to wall with plastic rowl plug and steel screw complete all as specified and as directed.

Hacking out old broken glass(any thickness, size, quality or description) from wooden frames or metal frame including punching or drilling out old glazing pin/ spring clip or glazed with oil putty or fixed with window beads complete all as specified and as directed.

S&F 4mm thick Sheet glass, ordinary quality and glazing with oil putty or wooden beading to wooden frame or steel frame in square n exc 0.5sqm each pane complete all as specified and as directed.

M &L for preparing including scrapping properly the old/new entire surface with appliying 2-3 mm thick putty on wall surface in external or internal surface finished even and smooth complete all as specified and as directed.

M & L for prepring old plaster surface applying one coat acrylic emulsion , white or tinted on wall surface with roller brush complete all as specified and directed.

M & L for new plaster surface applying two coat acrylic emulsion , white or tinted on wall surface with roller brush complete all as specified and as directed.

M & L for prepring old plaster surface applying one or more coat acrylic emulsion , white or tinted on ceiling surface with roller brush complete all as specified and as directed.

M&L for preparing of new surface and applying Two or more coats exterior weather coat paint over 1 to 1.5 mm coat of putty complete all as specified and as directed.

M&L for preparing of old surface and applying Two or more coats exterior weather coat paint over 1 to 1.5 mm coat of putty complete all as specified and as directed.

M&L for preparing new wooden surfaces of any description, not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint over pink primer complete all as specified and as directed.

M&L for Preparing old painted surfaces of wood of any description, not otherwise described, over 10cm width or girth and one coat of synthetic enamel paint complete all as specified and as directed.

M&L for preparing old painted steel and iron surfaces of any description, over 10cm in width or girth, not otherwise described and applying one coat of synthetic enemal paint complete all as specified and as directed.

Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and as directed.

M&L for 6 mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Alumi?nium framework with screw fixed to wallcomplete all as specified and as directed.

Dismantling of boarding fix with screws as in kitchen cabnit/ cup board/ partition/ shutteretc and simlar work complete all as specified and as directed.

S&F PVC Board Scratch and strain free (weight not less 10.5 Kg/Sqm) in Door, Shelves for Cup Boards or Kitchen Cabinets, one side laminated and one side palin, 18/19mm thick as required, jointed by means of PVC Adhesive Solvent and fixed using Self-tapping Aluminium Screws, and Fixed-in-repairs, complete all as specified and as directed.

S&F Stainless Steel Silver chrome Door Handle 100mm long, suitable for fixing of Brass screws inside of the board etc, and Fixed-in-repairs, complete all as specified and as directed.

S&F Magnetic Door Catcher medium grade to hold approx 1000 mm opening cabinet door and Fixed-in-repairs complete all as specified and as directed.

S&F Stainless steel frog hinges suitable for kitchen cupboards 22 mm PVC Board etc for smooth movement, and Fixed-in-repairs, complete all as specified and as directed.

Excavation in trenches in soft/loose soil not exceeding 1.5 m depth and n.exc 1.5 m wide for laying of pipes/cables etc and getting out complete all as specified and as directed.

Returning, filling in including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick in soft/loose soil complete all as specified and as directed.

Removing excavated material to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and as directed.

M & L for sand cushioning with a layer of sand 80 mm thick before laying of cables and 150 mm thick after laying of cables in trenches, or in Existing duct as directed for electric cables for protection incl.consolidation complete all as specified and as directed.

M&L for brick protection with sub class B bricks,laid dry flat over electric cables in trenches complete all as specified and as directed,

Lifting and taking out the sewage submersible pump set and motor of capacity 10 to 15 HP including column pipe by dismantling nut bolt washers and rubber packing etc including disconnecting of submersible cable complete from the sewage sump /well and lowering back the pump after repairing /removing the sludge from the pump including making electrical connection with the existing panel /starter and connecting the complete the column pipe assembly with nut bolts, washers/ packing to the existing header without any leakage complete all as directed. Note :- Rate are deemed to be inclusive for jointing of Submersible Cable , reconnecting the delivery pipe line of submersible pump sets to water mains , testing for satisfactory running & continuous flow of water complete.

All as per item No. 80 described here in before but of capacity 2 HP to 7.5 HP complete all as specified and as directed.

M&L for electric arc welding at places like flanges/pipe line, joints , strip of clarifier tank, approach ladder to aeration tank etc complete all as specified and as directed.

M&L for rewinding of Submersible motor by taking out burnt copper winding, cleaning the casing & slots with wire brush & washing with pressure water & shall be dried , rewinding the motor using required gauge of super enameled copper winding wire, varnishing and stamping and overhauling etc. Making the winding leak proof & taking out the electric connection with suitable size of submersible cable up to 03 Meter, Capacity of motor 10 HP to 15 HP complete all as specified and as directed .

All as per Item No 83 above but 5 to 7.5 HP Capacity.

M&L for repairing and testing of pump centrifugal/mono block/non clogging upto 5 to 12.5 HP of any make and type including welding work, rotor turning and balancing, re-metaling of shaft bush bearing, keys, mechanincal seal, SS shaft impeller and other such accessories etc required to make pump functional and testing on load complete all as specified and as directed .

M&L for repairing of electric motor upto 5 HP 50 Hz 400/415 volts of mono block/centrifugal pump of any make and type with super enameled copper winding wire including bearing bushes and other accessories etc required to make motor functional and testing on load complete all as specified and as directed

M&L for repairing of electric motor 15 to 20 HP 50 Hz 400/415 volts of mono block/centrifugal pump of any make and type with super enameled copper winding wire including bearing bushes, varnishing and stamping and overhauling. making the winding leak proof etc. and other accessories etc required to make motor functional and testing on load complete all as specified and as directed .

M&L for Disconnecting and taking down treated sewage transfer pump set up to 15 HP horizintal type and replacement of burnt copper winding, cleaning the casing & slots with wire brush & washing with pressure water & shall be dried , rewinding the motor using required gauge of super enameled copper winding wire including bearing bushes, mechanical seal rotor tunring & balancing, shaft SS impeller varnishing and stamping and overhauling etc. Making the winding leak proof & taking out the electric connection with suitable size of submersible cable up to 03 Meter and re-assembling and fixing the pump set complete in the same location and testing all as specified and as directed .

M & L for servicing of air blower with positive displacement type twin lube root blower with Motor of 12.5 HP to 15 HP capacities, including Opening the blower motor blower shaft, shaft Key ways, shaft holes etc and M & L for replacing the gland packing, gland nuts, coupling, replacement of oil seal including oil and rewinding of blower motor with super enameled copper winding wire as per existing size including re-fixing the same to the original position and commissioning testing complete all as specified and as directed .

S & F Fan belt B-45 suitable for Air blower including taking down complete all as specified and as directed.

M & L for Periodical Cleaning of equalizing tank /grit chamber/ oil grease chamber/stilling chamber of Sewage Water in the tank and Removing of settle down Sewage sludge cum mud/De-Silting etc and making good the patches on walls internally or externally in cement mortor 1:3 where required all as required at site and directed by the Engineer-in-Charge at AF Stn Gurgaon for Sewage tank of STP 500 KLD of under mentioned sizes complete all as specified and directed :- (a) Collection tank dia 6m and depth 9m x 4m - (Sump Well/ Equalization tank). (b) Screen/ grid Chamber. (c) Aeration tank - dia-9m and depth 5m. (d) Clarifier - dia 7.4 mtrs and depth 4.5 mtrs. (e) Sludge drying bed of size 10 m x 4.5 m x1.5m. Note: The rate quoated by the tenderer is deemed to be included in the unit rate of the following :- (a) Diesel Driven Pump Set of appropriate capacity with operators including necessary POL required at site for De- Watering of Sewage septic water including PVC heavy duty flexible hose pipe for suction and delivery purposes. (b) Lorry/Tractor mounted septic storage tank of appropriate capacity not less than 3 KL should be used for disposing off the same to the location where approved by the Delhi Canttonment Board/MCD. (c ) Necessary Oxygen Mask, Gloves, Gum Boot and all other safety aspects to be observed including necessary Phawda, Steel Bucket, Manila rope etc. required at site complete all as specified and as directed.

M & L for Cleaning of filter medial tank (ACF & DMF) , pumping out all sludge and foreign material including washing the entire tank and scraping the walls with wire brushes and making good the patches on walls internally or externally where required complete all as specified and as directed. (Make: MM Aqua/Venayaka Engineers/ Ion Exchange)

Supply and pouring Bio media made of plastic and corrugated shape having surface area 260 sqm/cum in MBBR complete all as specified and as directed.

Supply only DWPE chemical for sewage treatment plant complete all as specified and as directed.

Material and labour for replacement of quartz silica sand 32-64 grade complete all as specified and as directed.

Material and labour for replacement of quartz silica sand 16-32 grade complete all as specified and as directed.

Material and labour for replacement of quartz silica sand 8-16 grade complete all as specified and as directed.

Material and labour for replacement of quartz silica sand 4-8 grade complete all as specified and as directed.

Material and labour for replacement of activated carbon IV 1000 complete all as specified and as directed.

Taking out complete pebbles from the filter and and refilling the same pebbles after washing /cleaning thoroughly complete all as specified and as directed.

M & L for Periodical Cleaning of equalizing tank /grit chamber/ oil grease chamber/stilling chamber of sewage Water in the tank and Removing of settle down Sewage sludge cum mud/De-Silting etc and making good the patches on walls internally or externally in cement mortor 1:3 where required all as required at site and directed by the Engineer-in-Charge at AF Stn Gurgaon for Sewage tank of STP 300 KLD of under mentioned sizes etc complete all as specified and directed :- (a) Equilizer tank/ /grit chamber/ oil grease chamber/stilling chamber of Sewage Water of size - 6.30m x 4.70m x 6m - 01 No. (b) Sludge holding tank of size - 2.6mx2.6mx3m-01 No. (c ) Fab-1 & Fab-2 of size - 2.1m x 2.1m x 5.80m - 02 Nos. (d) Tube Settler Tank - 4.1m x 2.5m x 3.8m - 01 No. (e) Treated water Tank 9.3 m x 3.4 m x 4.1m-01 No. Note: The rate quoated by the tenderer is deemed to be included in the unit rate of the following :- (a) Diesel Driven Pump Set of appropriate capacity with operators including necessary POL required at site for De- Watering of Sewage septic water including PVC heavy duty flexible hose pipe for suction and delivery purposes. (b) Lorry/Tractor mounted septic storage tank of appropriate capacity not less than 3 KL should be used for disposing off the same to the location where approved by the Delhi Canttonment Board/MCD. (c ) Necessary Oxygen Mask, Gloves, Gum Boot and all other safety aspects to be observed including necessary Phawda, Steel Bucket, Manila rope etc. required at site and all as directed by the Engineerin-Charge.

Supply and mixing of Sodium hypochloride having 10% chlorine content etc required at site complete all as specified and as directed.

Supply and mixing of Poly aluminium chloride 100% purity etc required at site complete all as specified and as directed.

M&L for repair,servicing,fixing, testing and commissioning of existing 0-6 LPH electrically operated, metered, adjustable dosing pump with accssories including lead tubing , connecting nuts injection check valve with 60 ltr PE/ FRP tank fitted with agiatator all as directed by engineer -in - charge E tank with PE/FRP/HDPE lid and level gauges, mounted on tank complete all as specified and as directed.

M & L for carrying sample testing of sewage water as per relevant IS of STP and submission of detailed test report to the office of the Engr-in-charge and testing in Govt approved laboratory as approved by GE. (a) Carrying out minimum essential testing of sewage water as per relevant IS mandatory for chemical, odour, PH value,TSS, BOD, COD, total nitrogen, sulphate, oil and grease, ammonical Nitrogen (NH3-N) and Bacteriological total colliform organism and other characterstics as per relevant IS of sewage water. (i) Cost of sterilized bottle as required. (ii) cost of sample collection from Site to laboratory including transportation charges are included in the quoted rate.

M & L for Carrying sample for testing of treated water of STP and submission of detailed test report to the office of the Engineer-in-charge. Details are as under:- (a) carry ing out minimum essential testing of treated water as per IS 3025 & IS 1622 mandatory for chemical , colour, odour, PH value, TSS, BOD,COD, Total residual chlorine, total Nitrogen, sulphate, oil and grease, Ammonical nitrogen(NH3-N) and Bacteriological total coliform organism per 100ml (MPN) and Ecoli in 100ml. (b) Treated sewage water shall confirm to the following characterstics:- (i) TSS : < 10 mg/litre. (ii) BOD : < 10 mg/ litre. (iii) COD: < 150 mg/litre. (iv) Ph: 6.5 -8.5. (v) Total coliform: < 100 MPN/100 ml (desired nil). (vi) Resudual CI> 1 mg/litre. Rest of the characterstic of the treated water shall be as per IS 3025 & IS 1622. (i) Cost of sterilized bottle as required. (ii) cost of sample collection from Site to laboratory including transportation charges are included in the quoted rate.

Supply only compressure oil complete all as specified and as directed.

Supply, laying , jointing, welding & testing MS pipe ( Heavy duty Class 'c') including fitting as required of following sizes laid in treches or laying or floor for connecting to various STP accessories and to connect outgoing water main from Non clogging submersible pump including taking down the unserviceable pipe complete all as specified and as directed. Note:- MS flange and flange joint, bends etc complete with jointing material shall deemed to be included in the unit rate of this item.

(a) 100 mm bore.

(b) 80 mm bore.

(c) 65 mm bore.

(d) 50 mm bore .

(e) 40 mm bore.

S & F in repair GI tubing and connections including all fittings such as bends, belows tee, unions, sockets, flange welding on both side of a length of 6 mtr span etc or laid complete in trenches of size 50mm dia including taking down etc complete all as specififed and as directed.

M & L for High density polyethylene pipes (HDPE) of size 50mm of pressure rating 6 Kgf/cm2 fixed complete laid in trenches etc complete all as specified and as directed.

M & L for High density polyethylene pipes (HDPE) of size 90mm of pressure rating 6 Kgf/cm2 fixed complete laid in trenches etc complete all as specified and as directed.

M & L for Earthing complete with GI earth plate electrode 600 mm x 600 mm x 600 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of the plate not less than 1.5 metre below normal ground level, connected to and including using galvanised strip 25×4mm mm as earthing lead by means of bolts, nuts, check nuts and washers of galvanized iron or steel, earth pit surrounded by picked layer of coal dust and common salt, 15cm thick all around bottom and top and watering pipe 20mm bore of GI medium grade with funnel and 40 mm dia GI protection pipe medium grade all as shown in electrical plate No 3 of SSR Part-I and connected to earthing test point, main switch board and testing on completion including excavation, earth work concrete pit with 50mm thick RCC cover in RCC 1:2:4 type B-1 duly reinforced with MS bars 6mm dia @ 150C/C both ways and pit chamber in PCC 1:2:4 type B-1 with 2 Nos suitable lifting handles of 12mm MS bar complete all as specified and as directed.

Supply and fix cast iron flanged drilled heavy duty sluice valve 100 mm dia with ISI mark with stainless steel spindle and check nut and plan PN-1.6 complete with rubber insertion, nuts and bolts with washers etc complete all as specified and as directed. Note. Rate for Nuts, bolts, gasket, etc. shall be included in the unit rates.

Supply and fix in butterfly valves suiatable for GI/MS pipe complete including dismantling the old one all as specified and as directed by Engr-in-Charge for the following sizes :-

(a) 100 mm bore.

(b) 80 mm bore.

(c) 65 mm bore.

(d) 50 mm bore.

Supply and fix Gun Metal globe or Gate valve iron wheel head screwed both ends for iron pipes of size 50mm dia bore complete all as specified and as directed.

Supply and fix in replacement MCCB 100 A ,3 pole ,25 KA with adjustable thermal & fixed magnetic setting with bus bar spreader links for connecting both incoming and outgoing cables with suitable connections with suitable size of glands etc complete including testing & commissioning complete all as specified and as directed.

Supply and fixing in replacement of MCCB 250 A, 4 pole, 36 KA with adjustable thermal magnetic setting with bus bar spreader links for connecting both incoming and outgoing cables with suitable connections with suitable size of glands etc complete including testing & commissioning complete all as specified and as directed.

Supply and fix in replacement MCCB 160 A ,3 pole ,36 KA with adjustable thermal & fixed magnetic setting with bus bar spreader links for connecting both incoming and outgoing cables with suitable connections with suitable size of glands etc complete including testing & commissioning complete all as specified and as directed.

Supply and fixing in replacement of flat submersible 3 core 6 sqmm cable PVC insualted unsheathed multistranded copper conductor water proof suitable for submersible pump set complete all as specified and as directed.

Supply and fixing in replacement of flat submersible 3 core 10 sqmm cable PVC insualted unsheathed multistranded copper conductor water proof suitable for submersible pump set complete all as specified and as directed.

Supply and fix in replacement of cast iron pipes with spigot and socket ends centrifugally cast 100mm dia size Class LA, in any length, laid in trenches all as specified and as directed.

Supply and fix in replacement of cast iron pipes with spigot and socket ends centrifugally cast 150mm dia size Class LA, in any length, laid in trenches all as specified and as directed.

M&L for CI fitting for spigot and socketed pipes such as bends (any type, radius and angle) Tapers any type (straight, bend, increasing or double socket etc) Tee pieces single branch 'Y' juction double branch cross (all sockets or socket and spigot) collars, caps and plugs of any size complete all as specified and as directed.

M & L for trenchless boring under roads/ crossing or fixed to wall/ pole, GI tubing light grade of size upto 150mm bore for protection of UG cables complete all as specified and as directed.

Supply, laying and testing cable XLPE insulated, screened, PVC badded,galvanised steel strip or wire armoured, Heavy duty, electric power cable with Aluminum conductor 1100 Volts Grade, Cross-Sectional area as mentioned under complete all as specified and as directed:-

(a) 35 Sqmm, 3.5 core.

(b) 50 Sqmm, 3.5 core.

(c) 70 Sqmm, 3.5 core.

S & F in replacement MS Coloumn pipe of bore 100 mm and 3 meter length with socket of size 100 mm dia 6 mm thick duly screwed as well as welded on both ends , lowering and fixing into the Sewage well by using nuts, bolts , gasket and washers complete all as specified and as directed.

S & F in replacement CI non return valve 100 mm dia complete all as specified and as directed.

Disconnecting/removing the old unserviceable burnt parts from the FASD starters and supply and fix the new items as per exiting the model for AC 415 V,50 HZ 3 phase suitlable for lthe motors complete all as specified and as directed.

(a) Power Contactor, 3 pole, MNX-12 with front mounting Aux contacts block1 NO + 1NC of range AC1 -30 A & AC3 - 12 A of Make - L&T Cat No. CS94108 and Aux contat block Cat No CS94112^ complete all as specified and as directed.

(b) Power Contactor, 3 pole, MNX-18 with front mounting Aux contacts Block1 NO + 21NC of range AC1 - 30 A & AC3 - 18 A of Make - L&T Cat No. CS94100 and Aux contact block Cat No CS94112^ complete all as specified and as directed.

(C) Power Contactor, 3 pole, MNX-22 with front mounting Aux contacts 1 NO + 21NC of range AC1 - 32 A & AC3 - 22 A of Make - L&T Cat No. CS94980 and Aux contact block Cat No CS94113^ complete all as specified and as directed.

(d) Power Contactor, 3 pole, MNX-25 with frot mounting Aux contacts 1 NO + 21NC of range AC1 - 45 A & AC3 - 25 A of Make - L&T Cat No. CS94110 and Aux contact block Cat No CS94114^ complete all as specified and as directed.

(e) Power Contactor, 3 pole, MNX-32 with Aux contacts 1 NO + 1NC of range AC1 - 55 A & AC3 - 32 A of Make - L&T Cat No. CS94110 complete all as specified and as directed.

(f) Power Contactor, 3 pole, MNX-40 with Aux contacts 1 NO + 1 NC of range AC1 - 55 A & AC3 - 40 A of Make - L&T Cat No. CS94190 and Aux contact block Cat No CS94114^ complete all as specified and as directed.

(g) Power Contactor, 3 pole, MNX-45 with Aux contacts 2 NO + 2 NC of range AC1 - 80 A & AC3 - 45 A of Make - L&T Cat No. CS97074 complete all as specified and as directed.

(h) Power Contactor, 3 pole, MNX-50 with Aux contacts 2 NO + 2 NC of range AC1 - 85 A & AC3 - 50 A of Make - L&T Cat No. CS97076 complete all as specified and as directed.

(j) Power Contactor, 3 pole, MNX-70 with Aux contacts 2 NO + 2 NC of range AC1 - 100 A & AC3 - 70 A of Make - L&T Cat No. CS97076 complete all as specified and as directed.

(k) Power Contactor, 3 pole, MNX-80 with Aux contacts 2 NO + 2 NC of range AC1 - 100 A & AC3 - 80 A of Make - L&T Cat No. CS97077 complete all as specified and as directed.

(l) Power Contactor, 3 pole, ML-2 with Aux contacts 2 NO + 2 NC of range AC1 - 40 A & AC3 - 32 A of Make - L&T Cat No. SS90701 complete all as specified and as directed.

(m) Bimetal over load relay MN-2 type directly mounted/operated of range 9-15 Amp of Make L&T Cat No. SS94142OOVO complete all as specified and as directed.

(n) Bimetal over load relay MN-2 type directly mounted/operated of range 14-23 Amp of Make L&T Cat No. SS94144OODO complete all as specified and as directed.

(o) Bimetal over load relay MN-5 type directly mounted/operated of range 30-50 Amp of Make L&T Cat No. SS94136OOGO complete all as specified and as directed.

(p) Bimetal over load relay MN-5 type directly mounted/operated of range 66-110 Amp of Make L&T Cat No. SS94137OOKO complete all as specified and as directed.

(q) single phase preventer suitable for 3 HP to 60 HP pump sets complete all as specified and as directed.

J.P. Enterprises

SHAKSHI ENTERPRISES

akhil enterprises