SPECIAL REPAIRS TO BLDG NO 11D, 14C AND 16B AT GAUR ENCLAVE, PROVN OF SHED AT TRG AREA OF AMC CENTRE, PROVN OF RAIN WATER SHELTER AT DILKUSHA ENCLAVE AND CERTAIN ROOF SHEETING AND SHED WORK AT AFT UNDER GE WEST LUCKNOW

Amount

Demolition of brick or stone boulder masonary, built in cement mortar including all quions, arches, Pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles all as specified and directed.

Material and Labour for brick work with fly ash bricks old size , straight or curved on plan, exc 6m mean radius, built in CM 1:6 complete all as specified and directed.

Material and Labour for brick work with fly ash bricks old size , straight or curved on plan, exc 6m mean radius as in half brick thick wall, built in CM 1:4 complete all as specified and directed.

Taking down cement or cement lime plaster on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.

Material and Labour for rendering 15mm thick in CM 1:6 on brick work or concrete surface and finishing the surface even and smooth without using extra cement complete all as specified and directed..

Material and Labour for rendering 15 mm thick cement plaster in CM 1:4 with water proofing compund (@ 3% by weight of cement) on fair faces of brick work or concrete surface and finishing the surface even and smooth without using extra cement all as specified and directed. (Note:- Water proofing compound shall be measured and paid seprately.)

Supply only integral water proofing compound conforming to IS 2645 complete all as specified and directed.

Material and Labour for rendering 10mm thick in CM 1:3 on ceiling of concrete surface and finishing the surface even and smooth without using extra cement complete all as specified and directed..

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises all as specified and directed.

M&L for Non skid ceramic coloured floor tiles (Premium quality) shade as approved size 7-8mm thick area of each tile exc 0.06 Sqm but not exc 0.11 Sqm set in neat cement slurry and pointed with white or colour cement to match over 15mm thick cement screed in cement mortar 1:6 as in floors complete all as specified and directed

M&L for Non skid ceramic coloured floor tiles (Premium quality) shade as approved size 7-8mm thick area of each tile exc 0.11 Sqm but not exc 0.18 Sqm set in neat cement slurry and pointed with white or colour cement to match over 15mm thick cement screed in cement mortar 1:6 as in floors complete all as specified and directed

M&L for Non skid ceramic coloured floor tiles (Premium quality) shade as approved size 7-8mm thick area of each tile exc 0.11 Sqm but not exc 0.18 Sqm set in neat cement slurry and pointed with white or colour cement to match over 10mm thick cement screed in cement mortar 1:4 as in skirting complete all as specified and directed

Material and Labour for coloured digital glossy ceramic tiles 300 x 600 x 7 to 8mm thick on vertical surfaces such as skirting/dado set and jointed in neat cement slurry & pointed in colour cement to match the surface over and including 10 mm thick rendering in cement morter (1:4) complete all as specified and directed.

M& L for Virified Ceramic tiles double charged dark shade 8 to 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15mm thick screed bed in cement & sand mortar 1:6, complete all as specified and as directed.

M& L for Virified Ceramic tiles double charged dark shade 8 to 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm in skirting/dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 10mm thick rendering in cement & sand mortar 1:4, complete all as specified and as directed.

Dismantling stone slab and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed.

M&L for 18-20mm thick Granite stone slab, machine cut and polished as in cooking platform in full lenght,and window cills bedded and jointed with grey cement slurry and pointed to match the shade of granite sotne, laid over and including 20mm thick screed bed in cement mortar 1:4, including rubbing, grinding, making hole for gas pipe line and including making sandwitch moulding to edges complete all as specified and directed.

M&L 18-20mm thick granite stone slab, machine cut and polished in shelves and partition in cupboards, jointed with grey cement slurry and pointed with white cement (1:2) using marble dust with admixture of pigment to match the shades of granite stone, including rubbing, grinding, polishing on both sides including making moulding to edges complete all as specified and directed.

M&L 20-25 mm thick Kota stone slab, machine cut and polished as in flooring, bedded and jointed with grey cement slurry and pointed with white cement (1:2) using marble dust with admixture of pigment to match the shade of stone, laid over and including 15mm thick screed bed in cement mortar 1:6, including rubbing, grinding and mirror polishing complete all as specified and directed.

M&L 20-25 mm thick Kota stone slab, machine cut and polished as in risers of steps, skirting, dado and pillar etc bedded and jointed with grey cement slurry and pointed with white cement (1:2) using marble dust with admixture of pigment to match the shade of stone, laid over and including 10mm thick screed bed in cement mortar 1:4, including rubbing, grinding and mirror polishing complete all as specified and directed.

M&L for machine pressed chequerred cement concrete tiles coloured of size 300x300x20-22mm thick, set, jointed and pointed in neat cement slurry over and including 15mm thick screed in CM 1:6 as in floor complete all as specified and directed.

M&L for machine pressed chequerred cement concrete tiles coloured of size 300x300x20-22mm thick, set, jointed and pointed in neat cement slurry over and including 10mm thick screed in CM 1:4 as in skirting/dado complete all as specified and directed.

Taking down steel tubing and connection 15mm bore incl cleaning for refixing or removing from site and Supply, fixing, laying & testing 15 mm dia (Nominal bore) galvanised iron water tubing 'medium grade' with and including all GI fittings such as flanges, unions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc. fixed complete to walls and ceilings or laid in floors and testing complete all as specified and directed.

Taking down steel tubing and connection 20mm bore incl cleaning for refixing or removing from site and Supply, fixing, laying & testing 20 mm dia (Nominal bore) galvanised iron water tubing 'medium grade' with and including all GI fittings such as flanges, unions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc. fixed complete to walls and ceilings or laid in floors and testing complete all as specified and directed.

M & L for Cutting chases, pinning in, for concealed water tubing etc. in brick walls and making good to disturbed surface in cement mortar 1:3, cutting not exceeding 10cm in girth complete all as specified and directed.

M & L for Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1: 3 complete all as specified and directed.

Supply and Fixing in repairs 100 mm bore cast iron sand cast soil waste and vent pipe in any length with or without ears with cement joints and laid under floors fixed to walls complete all as specified and directed.

Supply and Fixing in repairs 75mm bore cast iron sand cast soil waste and vent pipe in any length with or without ears with cement joints and fixed to walls or laid under floors complete all as specified and directed.

Supply and Fixing for 100mm bore cast iron branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) with or without ears complete all as specified and as directed.

Supply and Fixing for 100mm dia plain cast iron bends (any radius) diminishing pieces or tapers for complete all as specified and as directed.

Supply and Fixing for 75mm dia plain cast iron bends (any radius) diminishing pieces or tapers for complete all as specified and as directed.

Material and Labour 100mm dia cast iron floor/nahani trap, with grating including jointing to waste pipe, fixed in plain cement concrete 1:2:4 type B-0 (using 12.5mm graded stone aggregate) complete all as specified and directed.

Material and Labour 75mm dia cast iron floor/nahani trap, with grating including jointing to waste pipe, fixed in plain cement concrete 1:2:4 type B-0 (using 12.5mm graded stone aggregate) complete all as specified and directed.

S & F in repair PVC (SWR) Pipes 110 mm bore single socketed in any length with rubber ring joints , fixed on walls complete all as specified and directed.

S & F PVC (SWR) bends any radius 110mm size complete all as specified and directed.

S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white including fixing bolts, seat cover (white), (excluding flush pipe) and 'P' or 'S' trap, including connection to trap and flushing pipe, antisyphonage pipe etc including provision of PCC (1:5:10) type E2 in filling, making good to floor, complete all as specified and directed.

S & F in repairs vitreous china wash hand basin white flat back size 550x400mm incl 02 Nos angle iron bracket 40x40x5mm bracket CP waste coupling & PVC waste pipe, complete all as specified and directed.

S & F Vitreous china squatting pan Orissa pattern 'long pan' size 580x440mm white with 'P' or 'S' trap, front or back inlet with murga band and any pattern excluding flushing cistern and flush pipe including provision of lime concrete bedding complete all as specified and directed.

S & F in repair PVC low level flushing cistern 10ltrs capacity, syphonic action type, white with inlet ball valve, float and handle including brackets with 32mm dia flush pipe of polythelene of low or high density complete all as specified and directed.

S & F in repair 15mm bore PVC connection 450mm long with PTMT nuts and washer complete all as specified and directed.

S & F in repair single lever brass CP wall mixer 3-in-1 system with provision for over head shower with 115 mm long bend pipe, connecting legs and wall flange (without overhead shower) shower for iron pipe of 15 mm bore GI pipe complete all as specified and directed. d Make : Essco Jaquar cat No - TQT-519 / Player cat No- PAS 120/ Prayag cat No - 6680

S & F in repairs brass CP central hole basin mixer for mixing hot & cold water Deck Mount with connecting Legs screwed down for iron pipe of 15 mm bore size complete all as specified and directed.

S & F in repairs brass CP kitchen sink mixer for mixing hot & cold water with Swinging Spout (Wall Mounted Model) with connecting Legs & Wall Flanges screwed down for iron pipe of 15 mm bore size complete all as specified and directed.

S & F in repair for CP bib taps quarter turn 15mm fancy type Chromium Plated cast copper alloy with crutch or butterfly handle complete all as specified and directed Make : Essco Jaquar cat No - TQT512 / Player cat No- PAS 106 / Prayag cat No - 6608

S & F in repair Angle valve quarter turn cast copper alloy with capstan head chromium plated screwed down high pressure with long shanks and fly nuts screwed for 15mm bore pipe complete all as specified and directed Make : Essco Jaquar cat No - TQT526 / Player cat No- PAS109 / Prayag cat No - 6610

S & F in repairs 15mm bore, fancy type chromium plated shower rose 125mm dia with shower arm complete all as specified and directed. Make : Essco Jaquar cat No - EOS-542A / Player cat No- AS1016 / Prayag cat No - BS-67

S & F in repair Soap dish CP any size complete all as specified and directed..

S & F in repair Gun-metal, globe or gate valves 20mm with iron wheel head, screwed both ends for iron pipe complete all as specified and directed

S&F in repairs hand shower (health faucet), superior quality, round shape, single flow, brass chromium plated, with 1m long chrome finish flexible pipe with wall hook bracket etc. and all fittings for EWC complete all as specified and directed.

S & F in repair CP brass toilet paper holder with wall hook and bracket complete set of superior quality complete all as specified and directed. Make : Essco Jaquar / Player / Prayag

S&F in repair towel rail, superior quality, fancy type, brass chromium plated with flanges complete all as specified and directed. Make : Essco Jaquar / Player / Prayag

S & F in repairs PVC coloured bath cabinet, overall size 560x410mm decorative design with looking mirror including all fittings complete all as specified and directed.

Supply & fix in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

S&F glass corner shelves fancy type 6mm thick 250x250mm size and fixed over CP brass brackets complete all as specified and directed

S & F 300mm long Stainless steel six peg hanger chromium plated fancy type as approved by Eng-in-charge complete all as specified and directed.

S&F sink with drainage board made of stainless steel 1mm thick for kitchen with plugs, washers and wastes, including fixing with cast iron cantilever brackets, bedding in cement mortar on to dwarf wall, connecting union to pipe, overall minimum size 915mm x 460 mm with bowl size 410mm x 330mm x160 mm including 32mm dia waste pipe of polythelene of low or high density, 32mm bore chromium plated brass waste fitting with long screwed shanks and fly nuts, flange end bedded in red lead cement & other end fixed, making holes in walls for brackets and fixed in CM 1:3 or PCC 1:2:4 type B0, complete, including taking down old unserviceable sink incl 40mm dia Waste coupling of PTMT (half or full threaded) complete all as specified and directed.

Supply and Fixing in repair stainless steel kitchen plate rack made out stainless steel of not less than 1mm thick sheet of size 900mm x 600mm x 200mm of approved pattern complete all as specified and directed..

Dismantling PVC water tanks and removing for capacity exceeding 250 litres & not exceeding 500 litres etc. and S&F 500 litre capacity Rotational moulded polyethylene water storage tanks triple layered (cylindrical, vertical with closed top) ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. complete all as specified and directed.

Dismantling PVC water tanks and removing for capacity exceeding 500 litres & not exceeding 1000 litres and S&F 1000 litre capacity Rotational moulded polyethylene water storage tanks triple layered (cylindrical, vertical with closed top) ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. complete all as specified and directed.

S&F 20 mm ball valve high pressure of PTMT with apoxy coated aluminium rod and high density plastic ball screwed for iron pipe, complete all as specified and directed. Make: Prayag/Polytuf/Jindal.

Taking down chowkhat with shutter (without taking off shutter from the frame) and area exc 1.5 sqm but n.exc 4 sqm each complete all as specified and directed.

Taking down chowkhat with shutter (without taking off shutter from the frame) and area not exc 1.5 sqm each complete all as specified and directed.

Taking down shutters of any description exc. 1 Sqm but not exc. 2 Sqm each complete all as specified and directed.

Taking down and refixing shutters of any description exc. 1 Sqm but not exc. 2 Sqm each in same opening complete all as specified and directed.

Material and Labour for Cutting holes in brick walls in cement mortar for inserting holdfasts and making good dismantled portion exc. Half brick but not exc one brick in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required complete all as specified and directed.

M&L 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F 35mm thick 2nd class hard wood glazed & skelton shutters ,open rebated, prepared to receive glass, gauze etc, without sash bar edge of framing plain, chamfered or rounded, fitted with cut or mitred beads for securing glass, gauge etc sizes of members of shutters as specifed in SSR Part-I section 8 clause 8.24(a)supplied and fitted to chowkhats complete all as specified.

Material and Labour for 5.5mm thick plain sheet glass ordinary quality including glazing with putty or wooden beads/aluminium beading area n.exc 0.5 sqm in each pane complete all as specified and directed.

S&F 75x50mm single rebated factory made, 100% Solid WPC (Wood ploymer composite) paintable door frame made from 100% lead free (single extruded process) material with density not less than 780 Kg/Cum complete all as specified and directed. (Note :- (i) Door frame shall be water proof, termite proof, fire retardant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life. (ii) Rate includes M & L for fixing the frame with minimum 06 Nos holdfast / dash through bolts of suitable size as directed.)

S&F 60x63mm single rebated factory made, 100% Solid WPC (Wood ploymer composite) paintable door frame made from 100% lead free (single extruded process) material with density not less than 780 Kg/Cum complete all as specified and directed. (Note :- (i) Door frame shall be water proof, termite proof, fire retardant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life. (ii) Rate includes M & L for fixing the frame with minimum 06 Nos holdfast / dash through bolts of suitable size as directed.)

S&F 28 mm thick factory made, 100% Solid PVC flush shutter made from co-extruded three layer rigid foam sheet (Single extruded) with 0.8 to 1mm thick plain/decorative sunmica outer layer having density not less than 1400 Kg/Cum and central core not less than 600 Kg/Cum manufactured by an ISO 9001/2015 certified company complete all as specified and directed

S&F 19 mm thick factory made, 100% Solid PVC flush shutter made from co-extruded three layer rigid foam sheet (Single extruded) with 0.8 to 1mm thick plain/decorative sunmica outer layer having density not less than 1400 Kg/Cum and central core not less than 600 Kg/Cum manufactured by an ISO 9001/2015 certified company complete all as specified and directed

S&F 200mm long Aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F 100mm size mild steel butt hinges, medium weight, bright finish and fixed with screws complete all as specified and directed.

S&F 150mm size extruded aluminum alloy handles, fabricated type, anodised complete all as specified and directed.

S&F 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.

S & F 18/19mm thick 1st quality plywood interior grade both side with commercial face, grade BWR, type BB fixed with screw/ nails to timber frame work edge chamfered complete all as specified and directed.

M&L 0.90mm thick decorative laminates type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and directed.

S&F Continuous (piano) hinges, mild steel, bright finished or electro galvanised, with width of flap 30mm when open, and fixed with screws complete all as specified and directed.

S&F Ball catches (magnet catcher) with 8mm dia steel ball, brass body and striking plate including letting in, overall size 50x15mm and fixed to shutter complete all as specified and directed.

S&F cloth hanger rod 18-20mm dia steel chromium plated for hanging clothes in wardrobe including suitable brakets complete all as specified and directed.

S&F 100mm long Aluminium anodised, hasp and staple, with mild steel pin including bolt to hinge plate and fixed with screws complete all as specified and directed.

S&F in repair 25mm dia stainless steel curtain rod, superior quality, with end brackets and end knobs and fixed to wall with wooden plug/ PVC gully with CP screws and cup washers complete all as specified and directed.

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F in repairs stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F 300mm long, mild steel, ordinary rat tail rod pattern springs including including roller and roller plate complete all as specified and directed.

M&L for two coats of cement base paint over one coat of primer on newly plastered surfaces of wall including preparation of surfaces complete all as specified and directed.

M&L for two coats of cement base paint on old previously treated surfaces of wall including preparation of surfaces complete all as specified and directed.

M&L for three coats of white wash on new plastered surfaces of walls including preparation of surfaces complete all as specified and directed.

M&L for one coat of white wash on old surface of walls including preparation of surfaces complete all as specified and directed.

M&L for two coats of oil bound distemper on previously treated/untreated plastered surfaces of wall over one coat of primer and 1mm thick layer of wall care putty including preparation of surfaces complete all as specified and directed.

M&L for three coats of white wash on new plastered surfaces of ceiling including preparation of surfaces complete all as specified and directed.

M&L for two coats of white wash on old plastered surfaces of ceiling including preparation of surfaces complete all as specified and directed.

M&L for preparation of new or previously untreated surfaces of wood or wood based materials of any description over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparation of old or previously treated surfaces of wood or wood based materials of any description over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint complete all as specified and directed.

M&L for preparation of new or previously untreated surfaces of steel or iron of any description over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for preparation of old or previously treated surfaces of steel or iron of any description over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint complete all as specified and directed.

Demolition of cement concrete (reinforced) such as beams, roof, shelves, manhole cover, chajjas and similar suspended work (reinforcement cut to facilitate demolition) complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floor or pavings not exc 15 cm thickness below or above ground level complete all as specified and directed.

M&L for 75mm thick cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate as in plinth protection, laid in panels, finished surface even and smooth without using extra cement and forming 12mm wide expansion joints to the full depth, and filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade 'A' complete all as specified and directed.

M&L 75mm thick cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate as in sub bases of floors and pavings etc.complete all as specified and directed.

Excavating in trenches n.exc 1.5m wide and n.exc 1.5m in depth for foundation etc or for shafts, wells, cesspits, manholes, pier holes etc n.exc 10 sqm on plan and n.exc 1.5m in depth and getting out in soft/ loose soil complete all as specified and directed.

M&L PCC 1:4:8 type D-2 (40mm graded stone aggregate) as in foundations filling and mass concrete complete all as specified and directed

Returning, filling in, trenches including spreading, levelling, watering and well ramming in layers not exc. 25cm in soft/ loose soil complete all as specified and directed.

Removing surplus excavated material soils exc 50m but n. exc 100m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and directed.

Excavating in post holes (or similar holes) each n.exc. 0.5 cum getting out, returning, filling in, and ramming earth or broken rubble mixed with earth around in layer n.exc. 25 cm including watering and removing surplus soil to a distance n. exc 50m and making good surface in soft/ loose soil complete all as specified and directed.

M & L for Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out as in soft/loose soil complete all as specified and directed

M&L for hardcore of broken stone or boulders of gauge not exc 63mm, deposited, spread and levelled in layers n.exc 15cm thick, watered and rammed to a true surface complete all as specified and directed.

M & L for cement concrete 1:2:4 type B1 (using 20 mm graded stone aggregate) as in roof kerbs, benching, coping, padding, kneelers etc complete all as specified and directed.

M & L 40mm thick plain cement concrete 1:2:4 type B-0 (Using 12.5mm graded stone agreegates) Damp proof course to horizontal or vertical surfaces including necessary formwork with using water proofing compound as per manufatiurer's instructions complete all as specified and directed. (Note WPC shall be measured and paid seperately)

M&L RCC M-25 (Nominal mix) using 20mm graded stone aggregate as in lintels, chajjas, shelves and similar works complete all as specified and directed.

M&L RCC M-25 (Nominal mix) using 20mm graded stone aggregate as in slab supported on walls, beams and columns in floors, roofs, balconies, canopies, deck slabs etc complete all as specified and directed.

M&L Mild Steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L Mild Steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required including cranking, bending spirally for hooping for columns and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed

M & L for use and waste of Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide for rough finish surface of concrete complete all as specified and directed.

S & F in repairs 'E' board 600x600x4mm thick white prelaminated sett embossed reinforced designer ceiling board tiles of approved texture at all height laid on hot dipped galvanised iron imposed grid with 24mm wide T-section exposed flanges which shall be powder coated white. The frame work shall comprise of main runner made from 0.33mm thick GS sheet and of size 24 x 32 x 300mm and spaced at 1200mm centers securely fixed to the structural soffts by approved hangers at 1200mm, maximum centrers.Hangers of GI wire 4 mm dia to be fixed by approved rawl plug, level and jumper and screws etc. The last hanger at the end of each main runner shall not be greater than 450mm from adjacent wall, Flush fitting of 1200mm long cross tee (with double stiching) to be interlocked between main runners at 600mm centre to from 1200 x 600 mm modules cross tee longer than 600mm to be supported independently. 600x600mm dodules to be formed by fitting 600mm long cross tee centrally between the 1200mm cross Tee, perimeter wall angle shall be of 0.45mm thick GS sheet of size 19x19mm and 300mm long of white colour all as per manufacturer's instructions complete all as specified.and directed.

M&L for provn of roof treatment with polymeric water proofing membrane all as given below:- (a) Taking down existing water proofing treatment and cleaning of roof surface by washing and rubbing etc. and removing the retrieved material to a distance not exceeding 500m where directed. (b) Applying a coat of bituminous primer conforming to IS: 3384-1986 @ 0.25 Iit/sqm on prepared surface and allowed to dry. (c) Applying and laying 3mm thick APP membrane having non woven polyester matt at core and covered with high quality polymeric asphaltic protected thermo fusible HMHDPE film on both sides with over laps 10cm and 15cm at longitudinal and transverse direction respectively and sealed by flame, sealing all overlaps complete including treatment at all junctions and corners. The membrane shall be torched into groove on vertical plane and groove sealed with cement mortar 1:3. (d) M&L for machine pressed chequerred cement concrete tiles of size 250x250x20-22mm thick, set, jointed and pointed in neat cement slurry over and including 15mm thick screed in CM 1:4 complete all as specified and directed. Note PCC padding or plaster/rendering as required shall be measured and paid for seperately

M&L 10mm thick screed bed or bedding layer in CM 1:4 using 100% coarse sand over roof slab, finished surface even and smooth without using extra cement and mixed with 3% integral water proofing compound complete all as specified and directed. NOTE: (i) WPC shall be measured and paid seperately. (ii) Wherever screed bed is provided, PCC padding shall not be provided.

Dismantling plain or corrugated steel sheeting any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

S & F for 0.50 mm thick pre-painted galvalume aluminium zinc coating galvanised iron based corrugated steel sheet with side lap and end lap of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S & F for 0.50 mm thick pre-painted galvalume aluminium zinc coating galvanised iron based plain steel sheet with side lap and end lap of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M & L rolled sections as in main and cross beams, posts, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors fixed with angle cleats or other connecting plates Fe 410-W(Gde- E- 250) quality-A complete all as specified and directed.

M & L for mild steel Joist, channel, angle, or tee sections, circular tubes fixed independently as in post, lillars, stanchions etc, without connecting plates, etc. (Fe-290 Gde E-165) (cut to ordinary lengths i.e. within 20mm of the length indicated) complete all as specified and directed

M & L for Framed work as in gusset plates for framed truss, rafters, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings etc. welded, riveted or bolted of Fe- 410 -W (Gde- E- 250) quality- A complete all as specified and directed

Supply and fixing ornamental and intricate design mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specifed and directed

S & F 30mm thick 2nd class hardwood boarding for floor, planed one side, with butt joints and fixed with nails complete all as specified and directed

M&L Providing and laying 60mm thick factory made cement concrete interlocking paver block of M-35 grade confirming to IS-15658 (2006) with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc.,of required strength, thickness & size/shape, made by table vibratory method using rubber mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as specifed and directed. Make :-Mehtab Tiles /Tulip Infrastructure Saharanpur/ Any other equivalent ISI marked make as approved by GE

Taking down copper/ aluminium point wiring (light, fan, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc. removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls, floors etc. to match the existing complete all as specified and directed. NOTE: Credit for this items shall be made as per conditions separately.

Material and labour for point wiring with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed FRLSH copper conductor cable with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLSH copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 20mm dia or higher, medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall and replacement of sunken box for modular switches/sockets, regulators etc and making good to the disturbed surfaces to match with the existing finishes complete all as specified and directed for one light / fan point controlled by one switch complete all as specified and as directed. Note :- Modular cover plate & switch sockets etc shall be measured and paid seperately

All as per item no 131 above but for one 5 pin 6 Amp socket outlet point on the same board with other switch.

Supply and fixing Modular switch 1 way 6A, 1 module complete all as specified & directed.

Supply and fixing modular Socket, 6A - 2/3 pin combined 2 module complete all as specified & directed.

Supply and fixing white cover plate with frame modular type of 04 module complete all as specified & directed.

Supply and fixing white cover plate with frame modular type of 03 module complete all as specified & directed.

S&F ceiling rose, 3 terminal, PVC/ Polycarbonate, insulated body, surface bakelite sheet 63.50mm dia complete all as specified and directed.

Supply & fix modular type AC power unit with a two pin and earth plug and socket complete with one single pole MCB 20 A complete all as specified & directed.

Supply and Fixing wall/surface mounting luminaires integrated LED Batten 20 W, 6000 K,100 lumens/watt , 230V with extruded Aluminium housing 4 feet long with frosted PMMA/PC diffuser & integrated electronic driver complete including Electrical connection with PVC three core copper flexible wire & all necessary fixing arrangements all as specified and directed by Engr-in-charge. Make Phillips Smart brite cat no BN 021 LED 22S 6500 PSU GR/SI or/Havells Endura linear neo cat no enduralinear neo BS22WLED865SPCWH/ Bajaj LED batten BCLAB 20W WH LED P

M&L for two single core PVC insulated FRLS cable 4.0 sq mm nominal cross sectional area stranded copper conductor and one single core green PVC insulated 4.0 sqmm stranded copper conductor earth continuity FRLS cable drawn through non metallic rigid PVC conduit 20mm dia including all conduit and fixing accessaries concealed in wall including cutting chases in wall and making good disturbed surface to match of walls /ceiling complete including taking down old sub main wiring. (Note-The cost of PVC pipe and accessories shall be deemed to be included in the quoted rate)

S& F Decorative wall light fixture made up of Metal base, synthetic white in colour and square/round metal base with bend pipe and glass globe with nickel finish, ( B-22/E27 base), with 01 No. 7/9 W LED Bulb, 230 V, 6000K, complete incl all required electrical connecting arrangements all as specified and as directed. Make Phillips Model Grace or Jaquar lighting cat no JNL-NKL-WLBPGG001E27/ Havells decorative model Floretine WL 1LS B22 SS cat no LHFOAJE1TZ1I060 ( Note: Rates incl 01X 7/9 W LED Bulb with each fitting)

Supply and fixing wall/surface mounting luminaires (Mirror Light) integrated LED Batten( 2 feet) 10/12 W, 6500 K, 230V ,100 lumens/watt,with extruded aluminium housing & integrated electronic driver complete including Electrical connection with PVC three core copper flexible wire & all necessary fixing arrangements all as per specified and directed by Engr-in-charge.Make:Phillips smart brite cat no BN 021 LED 12S 6500/4000 PSU GR/SI or/Havells Endura linear neo cat no enduralinear neo BS10WLED865SPCWH/ HPL Neptune plus 10 w HLPT51510CW

S & F water heater storage type electric BEE five star rated of capacity 25 ltrs to operate on 230 volt AC, 2000 watt vertical type including 2/4 Nos full threaded fastener of size 100x10 mm with, 2 No washer, water connection with 02 Nos heavy duty PVC flexible pipe of size 15 mm, 450 mm length & suitable plug top of 16 Amp capacity complete all as specified and directed. Make:- Havells (Adonia seris) / Bajaj Montage / Jaquar & Co. Pvt Ltd NOTE:- Old water heater storage shall be deposited in AGE E/M yard.

S&F in replacement modular switches 1 way 6A,1 module complete all as specified and directed,

S&F in replacement modular switches 1 way 16A,1 module, complete all as specified and directed,

S&F in replacement modular bell push ,1 module, complete all as specified and directed

S&F in replacement modular 6 A sockets-2/3 pin combine 2 module, complete all as specified and directed

S&F in replacement modular 6A/16A sockets-2/3 pin combine 2 module, complete all as specified and directed

S&F in replacement fan step regulator modular, 2 module, complete all as specified and directed

S&F in replacement modular white cover plate with frame ,2 module, complete all as specified and directed

S&F in replacement modular white cover plate with frame ,3 module, complete all as specified and directed

S&F in replacement modular white cover plate with frame ,4 module, complete all as specified and directed

S&F in replacement modular white cover plate with frame ,6 module, complete all as specified and directed

S&F in replacement modular white cover plate with frame ,8 module, complete all as specified and directed

S&F in replacement modular white blanking plate single module, complete all as specified and directed

Taking down carefully water heater (Geysers) of any capacity from any position by disconnecting all connection and refixing the same including all electric connection and acessories as required after overhauling complete all as specified and directed.

Taking down carefully ceiling fan/exhaust fan of any capacity from any position by disconnecting all connection and refixing the same including all electric connection and acessories as required after overhauling, oiling, greasing etc. complete all as specified and directed.

m/s durgesh traders & constractions

M/S KAUSHIK CONSTRUCTION

M/S Reliance Construction

M/S SWATI CONSTRUCTION

rajan construction

m/s raghubar dayal

R K CONTRACTOR AND SUPPLIERS