Construction of Balance Work for State Central Library Building at CTS No. 4094/1, University area, Kalina Santacruz (E), Mumbai (Including Electrical Work)

Amount

Dewatering on brake horse power basis by using water pump including diversion of stream, providing coffer dams, earthen bunds, etc. as may be necessary for foundation and other parts of the works and pumping out water during and after excavation as may be required by using 10.0 BHP to 19.0 BHP pump, etc. complete.

Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.)

Excavation for foundation in hard murum including removing the excavated material upto distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.50 m)

Excavation for foundation in Hard murum including removing the excavated material upto a distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift from 1.5 to 3.0m.)

Excavation for foundation in Soft rock and old cement or lime masonry foundations including removing the excavated material upto a distance of 50 metres beyond the building area and stacking as directed, including dewatering, preparing the bed for the foundation and necessary back filling with available earth /murum, ramming, watering including shoring and strutting etc. complete (lift upto 1.5m)

Excavation for foundation in Soft rock and old cement or lime masonry foundations including removing the excavated material upto a distance of 50 metres beyond the building area and stacking as directed, including dewatering, preparing the bed for the foundation and necessary back filling with available earth/murum, ramming ,watering including shoring and strutting etc. complete. (Lift from 1.5m To 3.0 m.)

Excavation for foundation in Hard rock by chiselling, wedging, line drilling, etc. including trimming and levelling the bed, removing the excavated material upto a distance of 50 metres beyond the building area stacking as directed, dewatering and back filling with available earth/ murum watering, ramming etc. complete. (Lift upto 1.5 m).

Filling in plinth and floors with approved excavated materials in 15 cm to 20 cm layers including watering and compaction complete. Spec. No.: Bd.A.10 Page No. 262

Removing any kind of debris including loading in truck and conveying to dumping point approved by BMC, unloading, spreading etc. complete. With all leads and lifts. (Lead 15Km).

Lowering down the debris obtained from breaking and removing the cement plaster / burnt brick masonry of the first floor by any means without causing dust nuisance and damage to structure, stacking the same as and where directed including cleaning the site complete.

Filling in plinth and floors with contractors’ material/brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc. complete.

Providing preconstructionalantitermite treatment as per I.S. V excavation at the rate of 5 litres of emulsion concentrate of 1.0 percent of chlorophyrifos per square meter of surface area covering 10 years guarantee on bond paper.

Providing preconstructionalantitermite treatment as per I.S. 6313 (Part-II) treatment by treating the backfill in immediate contact with foundation at the rate of 5 litres of emulsion concentrate of 1.0 percent of clorophyrifos per square metre of vertical surface area covering 10 years guarantee on bond paper.

Providing preconstructionalantitermite treatment as per I.S. 6313 (Part-II) by treating the top surface of plinth filling at the rate of 5 litres of emulsion concentrate at 1.0 percent of clorophyrifos per square metre of surface area covering ten years guarantee on bond paper.

Providing preconstructionalantitermite treatment as per I.S. 6313 (Part-I) to the soil along the external face of building by punching holes of 1.2 of 1.5 C.M. diametre about 30 -60 cm deep at 15 cm c/c as close to the wall as possible and to inject 0.5 percent of aldrin or clorophyrifos at the rate of 7.5 litres per hole and sealing the same with proper filling and covering 10 years guarantee on bond paper.

Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete.

Providing and laying Cast in situ/Ready Mix cement concrete in M15 of trap/ granite/quartzite/gneiss metal for bed blocks, foundation blocks and such other items including bailing out water, plywood/steel formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.), with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand

Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. columns as per detailed designs and drawing or as directed including centering, formwork, cover blocks laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand

Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including centering, formwork,cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand.

Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic microprocessor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand

Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C.coping to plinth or parapet and sill of doors and windows moulded as per detailed drawings or chamfered as approved by the Engineer including centering, formwork, cover blocks, laying/pumping, compacting , curing , finishing and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic microprocessor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand

Providing and fixing bituminous pad 25mm thick for expansion joints in retaining wall, compound wall etc. complete.

Providing and laying Cast in situ/Ready Mix cement concrete M- 25 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including centering, formwork, cover blocks, laying/pumping, compactionfinishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic microprocessor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand

Providing and laying Cast in situ/Ready Mixcement concrete M- 25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including centering, formwork, cover blocks, laying/pumping, compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic microprocessor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand

Providing and fixing in position HCRM / CRS (Corrosion Resistant Steel) bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.

Providing and fixing during laying in RCC Slab rectangular 2 mm thick M.S. sheet fan hook box of size 180x100 mm with required depth with holes or notches as required, bottom and top sides of 1.6 mm M.S. sheet fixed with 3.5 mm dia. round headed screws together with 12 mm dia. M.S. bar bent to shape with hooked ends for fan hook and painting to exposed surface

Providing uncoursed rubble masonry of trap / granite / quartzite / gneiss stones in cement mortar 1:5 in basements including scaffolding, bailing out water manually, racking out joints when plastering is to be done striking joints where no pointing or plastering is to be done and watering etc.complete.

Providing second class Burnt Brick masonry with conventional/I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually, striking joints on unexposed faces, raking out joints on exposed faces and watering etc. Complete

Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete

Providing Bricks masonry in cement mortar 1:4 using Second class burnt bricks in half brick thick wall including mild steel longitudinal reinforcement of 2 bars of 6 mm diameter / 2 hoop iron strips 25 mm X 1.6 mm at every third course, properly bent and bounded at ends scaffolding, raking out joints and watering complete.

Providing Autoclaved Aerated Concrete Block masonary of Ecolite or equivalent make conforming to IS:2185 (Part 3) - 1984 in extra fine jointing mortar of fixoblock of UltraTech or equivalent in superstructure including striking joints, raking out joints and scaffolding etc. Complete. (The test shall be carried out conforming to IS:6441 (Part I) - 972)

Providing Autoclaved Aerated Concrete Block masonary of Ecolite or equivalent make conforming to IS:2185 (Part 3) - 1984 in extra fine jointing mortar of fix oblock of UltraTech or equivalent in Half brick thick wall including striking joints, raking out joints and scaffolding etc. Complete. (The test shall be carried out conforming to IS:6441 (Part I) - 1972)

Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing complete. Spec. No. : Bd.L.2 Page No. 368

First Floor

Second Floor

Third Floor

Fourth Floor

Fifth Floor

Sixth Floor

Providing internal cement plaster 20mm thick in two coats in cement mortar 1:4 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc. complete.

First Floor

Second Floor

Third Floor

Fourth Floor

Fifth Floor

Sixth Floor

Providing internal cement plaster 20 mm thick in a single coat using Ready to use wall plaster to concrete, brick surfaces in all positions including scaffolding and curing. Providing groove at joint of B.B.Masonry and concrete members complete C ) cement mortar 1:4 With Prior Approval of Concerned S.E.

Providing internal cement plaster 12 mm thick in a single coat using Ready to use wall plaster to concrete or brick surface in all positions including scaffolding and curing complete. Providing groove at joint of B.B. Masonry and concrete members complete. a) cement ratio 1:4 With Prior Approval of Concerned S.E.

Providing and applying 13 mm thick internal plaster in gypsum (Stucco plaster) of approved make with neat smooth finish at all heights and locations for masonry (except tone masonry) and concrete surfaces including scaffolding, hacking of concrete surface, finishing etc. complete as per manufacturers specifications and as directed by Engineer in charge.

First Floor

Second Floor

Third Floor

Fourth Floor

Fifth Floor

Sixth Floor

Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete.

Providing applying and Making Heritage type artistic Dholpuri Plaster of mixture of stone crystal material with Bubble Spray with Rough & Tough Chemical Solvent on new or old plastered Surfaces of 1.5mm Minimum Thickness for making the finished surface waterproof and crackless in heavy rainfall area with appropriate finish, design, finishing and design approved by Engineer in Charge.

Providing and fixing chicken mesh of 22 gauge, with about 30 cm. width at the junction of R.C.C members and brick work, of approved quality including fixing mesh in position by necessary drilling in concrete /B.B.masonry and or tying by binding wire etc. complete.

First Floor

Second Floor

Third Floor

Fourth Floor

Fifth Floor

Sixth Floor

Providing fine cement finish 1.5 mm thick over green plaster surface including scaffolding curing etc. complete.

Providing and laying Rough Shahabad Stone Flooring 25mm to 30mm thick and of required width in plain/ diamond pattern on a bed of 1:6 C.M. including cement float, striking joints, pointing in cement mortar 1:3 curing and cleaning etc. complete.

Providing and laying machine cut machine Polished Kota stone flooring 25mm to 30mm thick and required width in plain/ diamond pattern on bed of 1:6 C. M. including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. complete.

First Floor

Second Floor

Third Floor

Fourth Floor

Fifth Floor

Providing and fixing in required position skirting or dado of polished Kotah Stone slab 25 mm to 30 mm thick fixed on base on plaster of cement mortar 1:4 including cement float, filling joints with cement slurry, curing rubbing, polishing and cleaning complete.

First Floor

Second Floor

Third Floor

Fourth Floor

Fifth Floor

Sixth Floor

Providing and laying machine cut machine polished machine cut Kota stone slabs 20 to 25 mm thick for treads and risers of steps and staircases, with rounded nosing for the treads on a bed of 1:4 cement mortar including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. complete.

First Floor

Second Floor

Third Floor

Fourth Floor

Fifth Floor

Sixth Floor

Providing leather finished polishing to Kota / Marble / Shahabad / Kadappa Stone slab by continuous grinding in 4 coats of different bits to receive rough and matty finish including buffing process before laying and fixing of stone as per drawing and design, including cleaning, washing and finishing etc. complete.

First Floor

Second Floor

Third Floor

Fourth Floor

Fifth Floor

Sixth Floor

Providing Mirror polishing to Kota Stone including using all necessary stones and equipment’s cleaning, washing etc. complete. For Flooring

First Floor

Second Floor

Third Floor

Fourth Floor

Fifth Floor

Providing Mirror polishing to Kota Stone including using all necessary stones and equipment’s cleaning, washing etc. complete. For Skirting

First Floor

Second Floor

Third Floor

Fourth Floor

Fifth Floor

Providing and laying in position flooring of telephone black /Amba White / Cat bary brown / Ruby red / Ocean Brown granite stone of approved shade and size 18 mm to 20 mm thick on bed 1:6 cement mortar including cement floats striking joints, pointing in C.M. 1:3 curing and cleaning etc. complete.

First Floor

Second Floor

Third Floor

Fourth Floor

Fifth Floor

Sixth Floor

Providing and fixing machine cut machine polished 18 mm to 20 mm thick telephone black / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone for treads and risers of steps and staircases of approved colour and shade with rounded moulding and three grooved line for the treads on bed of 1:4 Cement mortar including float filling joints with neat cement slurry curing polishing and cleaning etc. complete.

First Floor

Second Floor

Third Floor

Fourth Floor

Fifth Floor

Sixth Floor

Providing and laying telephone black / Amba White / Cadburybrown / Ruby red / Ocean Brown granite stone of 18 to 20 mm thick for door frame/ dado/ window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing the sharp edges wherever necessary, curing, etc. complete.

First Floor

Second Floor

Third Floor

Fourth Floor

Fifth Floor

Sixth Floor

Providing and fixing machine cut mirror polished 18 mm to 20 mm thick telephone black granite / Amba White / Catbary brown / RBI red / Ocean Brown granite stone partition with rounding the edges etc. complete. Both side polish

First Floor

Second Floor

Third Floor

Fourth Floor

Fifth Floor

Sixth Floor

Providing leather finished polishing to Granite Stone slab by continuous grinding in 4 coats of different bits to receive rough and matt finish including buffing process before laying and fixing of stone as per drawing and design, including cleaning, washing and finishing etc. complete.

Providing and laying in position flooring of Italian Marble of approved shade and size 18 mm to 20 mm thick on bed 1:6 cement mortar including cement floats,chemical compound, striking joints, pointing in C.M. 1:3 curing and cleaning etc. complete. Spec. As directed by Engineer in charge.

Providing Mirror polishing to Italian marble including using all necessary stones and equipment’s cleaning, washing .Floor Scrubbing marble stone with Single Disc Mirror Polishing using scrubbing pads then using floor polishing to remove dust & dirt & apply polish powder & single disc machine to make it shine and increase the gloss etc.complete.Spec. As directed by Engineer in charge

Providing and laying vitrified rustic matt stone finish tiles having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10mm thickness and confirming to IS. 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc. complete.a) Flooring

First Floor

Second Floor

Third Floor

Fourth Floor

Fifth Floor

Sixth Floor

Providing and laying vitrified rustic matt stone finish tiles having size 590 mm to 605 mm x 590 mm to 605 mm to 8 to 10mm thickness and confirming to IS. 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid ?on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and cleaning. etc. complete.b) Skirting

First Floor

Second Floor

Third Floor

Fourth Floor

Fifth Floor

Sixth Floor

Providing and laying vitrified mirror/glossy finish tiles decorative type having size 590mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS.15622-2006 (group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete

First Floor

Second Floor

Third Floor

Fourth Floor

Fifth Floor

Sixth Floor

Providing and laying vitrified mirror/ glossy finish tiles having size 590 mm to 605 mmx 590 mm to 605 mm of 8to 10mm thickness and confirming to IS. 15622 -2006 (group Bla) of approved make, shade and pattern for dado and skirting in required position fixed in 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete.

First Floor

Second Floor

Third Floor

Fourth Floor

Fifth Floor

Sixth Floor

Providing and fixing 1.5 mm thick polyvinyl vinyl chloride flooring including levelling the base with white cement including pasting with appropriate material cleaning the surface etc. complete

Providing and laying chequered tiles of approved quality of size 30 cm x 30 cm, confirming to corresponding I.S. for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with cement slurry cleaning curing etc. complete.

Providing and constructing granite kitchen platform with fixing of stainless steel sink 600 mm x 450 mm size as per detailed drawing including vertical both side polished kadappah stone 25 to 30 mm thick supports with kadappah top 35 to 40 mm thick and polished granite 16 to 20 mm top with side strips of granite at front and both sides of platform raised with two vertical granite supports 15 cm height and top granite of 75 x 40 cm including cutting, opening for sink of required size in kadappah as well as granite etc. complete.

Providing and fixing heavy duty inter locking concrete Coloured paving blocks of 40 mm thickness of having a strength of 200 Kilogram/ Sq.cm. of approved quality and shape on a bed of crushed sand of 25 to 30 mm thick including skirting joints and cleaning etc. complete

Supply & Fixing of Rock / Stone Finished outdoor vitrified flooring Tiles 20 mm thick and required width wide in plain pattern including Cement float, filling joints, with neat cement slurry, Natural sand, curing and cleaning complete. with prior approval of concerned Superintending Engineer.

Providing, supplying & fixing 5 mm metallic spacer of approved shade of reputed make etc complete as per detailed drawings and as directed by engineer in charge.

Providing, supplying & filling Epoxy Grout between tiles with reputed make etc complete as per detailed drawings and as directed by engineer in charge

First Floor

Second Floor

Third Floor

Fourth Floor

Fifth Floor

Sixth Floor

Providing with fixing china mosaic treatment with design inlay above brick bat coba with preparing bed in cement slurry, fibres and waterproofing compound with proper slope and making watta and nosing to parapet wall avoid leakages, curing and covering 10 years Guarantee against leak proofness on Court fee stamp paper of Rs. 500/-including ponding test etc. complete.

Providing and fixing frame work of galvanised iron for suspended false ceiling which includes galvanised iron perimeter channels of size 27 mm and 0.5 mm thick having one flange of 20 mm and another of 30 mm along with perimeter of the ceiling, fixing in brick wall / partition with the help of rawal plugs and screws, suspending galvanised iron intermediate channels of size 45 mm and 0.9 mm thick with two flanges of 15 mm each from the soffit at 1200 mm centers with steel galvanised iron hanger of width 25 mm x 0.5 mm fasteners, ceiling section of 0.5 mm thickness having curved wedge of 51.5 mm and two flanges of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with the help of connecting clips and in direction perpendicular to the intermediate channel at 450 mm centers, 12.5 mm dry walls screws at 230 mm centers; fixing screws mechanically either with screw driver or drilling machine with suitable attachment etc. complete.

First Floor

Second Floor

Third Floor

Fourth Floor

Fifth Floor

Sixth Floor

Providing and fixing false ceiling of 10 to 12 mm thick decorative boards of fibrous plaster of paris including scaffolding if necessary, all architectural work like mouldings, cornices, coves, domes, cups as per detailed drawings and three coats of spray painting to boards etc. complete. (Excluding frame work, runners and mild steel suspenders).

First Floor

Second Floor

Third Floor

Fourth Floor

Fifth Floor

Sixth Floor

Providing & Applying Indian Marine Calelalite Treatment to Plaster of Paris false ceiling to make water-repellent surface.

First Floor

Second Floor

Third Floor

Fourth Floor

Fifth Floor

Sixth Floor

Providing and fixing 15 mm thick eco-friendly densified edge calcium silicate false ceiling (like aeroltie) of approved texture spintone /cosmos /hexa or equivalent of size 595mm x 595mm in true horizontal level, suspended on interlocking metal grid of hot dipped galvanized steel sections (galvanising at @12 gm/sq.m including both sides)consisting of main T runner suitably spaced at joints to get required length and size 24X38mm. made from 0.33mm thick(minimum ) sheet, spaced 1200mm center to center and cross T of size 24X28mm made of 0.33mm thick(minimum ) sheet to be interlocked at the middle of the 1200x600 mm panel to form the grid of size 600x600mm resting on periphery walls/partitions on a perimeter wall angle precoated steel of size 24x24x3000 made of 0.4 mm thick (minimum) sheet with the help of all plugs at 450mm and laying 15 mm thick densified edges calcium silicate ceiling tiles of approved texture (spintone/cosmos/hexa) in the grid, including light fittings , fixtures , smoke detectors etc., wherever required. Main T runners suspended from ceiling with using G.I. slotted cleats of size 25x35x1.6 mm fixed to ceiling using 12.5mm dia. And 50mm long dash fasteners, 4mm G.I. adjustable rods with galvanized steel levels clips of size 85x30x0.8mm, spaced at 1200mm center to center along main T bottom exposed with 24mm of all T-sections shall be prepainted with polyester baked

First Floor

Second Floor

Third Floor

Fourth Floor

Fifth Floor

Providing and Fixing of GI Lay in Plain metal ceiling consisting of 600x600mm Lay in tiles of pre coated galvanized steel in 0.5 mm thickness in Global white color tile to be laid on grid systems with 15mm wide T - section flanges color white having rotary stitching on the Main Runner, 1200 mm and 600 mm Cross Tees. Providing and Fixing of GI Lay in Plain metal ceiling consisting of 600x600mm Lay in tiles of pre coated galvanized steel in 0.5 mm thickness in Global white color tile to be laid on grid systems with 15mm wide T - section flanges color white having rotary stitching on the Main Runner, 1200 mm and 600 mm Cross Tees.products approved as per GRIHA and BS 476 etc. complete.

Providing and applying Two coats of wall care Putty of 2mm thickness for plastered surface and 5-6mm thickness finished concrete surface to Ceiling and Walls to prepare surface evenand smooth of Brands BIRLA WHITE, BERGER, BISION, J.K., make, etc complete a) For plastered walls/ceiling 2mm

First Floor

Second Floor

Third Floor

Fourth Floor

Fifth Floor

Sixth Floor

Providing and applying 2 coats of 100% Pure acrylic low VOC and APEO & HCHO free water-based paint of approved colour that belongs to class 1 flame spread resistance of approved make Paint should provide durable and long lasting silk finish with a high crack tolerance of upto 1mm. Paint should have an outstanding washability with high resistance to wide range of bacteria and fungus. Paint has to be applied on smooth and uniform surface prepared by an acrylic copolymer low VOC &Odour putty. This surface should be primed with water based low VOC Primer. The work activity should cover all aspects of applying paints from surface preparation as directed by Engineer in charge.

First Floor

Second Floor

Third Floor

Fourth Floor

Fifth Floor

Sixth Floor

Providing and applying washable oil-bound distemper of approved colour and shade to old and new surfaces in three coats including scaffolding, preparing the surfaces. (Excluding the primer coat) complete. Spec. No.: Bd.P.5 Page No. 413

Providing and applying priming coat on concrete/ masonry/ Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etc. complete.

Providing and applying two coats Apex Ultima Puranature Anti- Pollution Or equivalent approved brand, paint should decomposes organic substances and inorganic gases(NOx, VOC’s, CO, SOx, formaldehydes, etc.) in presence of natural or artificial light. It contains Graphene and nanoparticles of titanium oxide. and Absorbs CO2 (4.8 kg/15 l). plaster crack should be filled by Acrylic base Crack seal/Textured Crack filler, Paint has to applied on one coat of Apex Ultima Puranature Anti-Pollution Primer or Equivalent. Warranty Should be given by the Manufacturer The work should be done by the Manufacturer Recommended applicator and he should be able to furnish stage wise onsite technical reports from the concerned company technologist.

Providing and applying two coats of synthetic enamel paint of approved colour to new /old structural steel work and wood work in buildings, including scaffolding if necessary, cleaning and preparing the surface (excluding primer coat) etc. complete.

Providing and fixing in position powder coated aluminium louvered windows / ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38 mm x 1.22 mm box type, 5 mm thick sheet glass louvers, of approved quality etc. complete.

First Floor

Second Floor

Third Floor

Fourth Floor

Fifth Floor

Sixth Floor

Providing and fixing fly proof mesh shutter to ventilator / window using CCTW members of size 45 x 22 mm for frame work and 35x 22 mm for middle support and fixing fly proof mesh on it and covering TW battens of size 20 x 10 mm including priming and two coats of oil painting to the new wood and steel work and all labour charges including all fixture and fastenings etc. complete

First Floor

Second Floor

Third Floor

Fourth Floor

Fifth Floor

Sixth Floor

Providing and fixing in position (as per 1868 / 1982) Aluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 mm at weight 0.637 kg/Rmt. with window frame bottom track section 92 x 31.75 x 1.30 mm at weight 1.070 kg/Rmt. Top and side track section 92 x 31.75 x 1.30 mm at weight 0.933 kg/Rmt. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 kg/Rmt. and handle and top section 40 x 18 x 1.25 mm at weight o.417 kg/Rmt. As per detailed drawings and as directed by Engineerincharge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etc, complete. With colourAnodising without box

Sliding Window- 3 Track (2 Glass shutter + 1 flymesh) of approved make with DGU, providing and fixing of Sliding Window- 3 Track (2 Glass shutter + 1 flymesh ). For details refer to specifications. As directed by Engineer in charge.

Providing and fixing in position U.P.V.C. (Unplasticized Poly Vinyl Chloride) having multi-chambered outer frame section (73 x 50)mm with an outer wall thickness of 2mm & steel reinforcement, multichambered slider frame (73x 60) mm with steel reinforcement, multichambered slider sash (46x 82) mm with steel reinforcement designed to give optimum strength, 5 mm thick toughened double glass with 12 mm spacer of good quality including aluminium track, Inter-locking profile, coextruded beadings, EPDM gaskets, silicon sealant,sliding handle, fixtures and fastenings (couplings, hinges) including with all required screws and nuts with all necessary U.P.V.C. sections as per the detailed drawing and as directed by Engineer-In-Charge etc. complete.

First Floor

Second Floor

Third Floor

Fourth Floor

Fifth Floor

Sixth Floor

Providing & fixing of Casement fixed window of approved make with DGU. The extruded aluminium sections of Alloy 6063 tolerances confirming to DIN standard from approved raw material V2 / V4 as directed by Engineer in charge.

First Floor

Second Floor

Third Floor

Fourth Floor

Fifth Floor

Sixth Floor

Terrace Floor

Providing and fixing aluminium grill diamond mesh type DG202 of 7.5 mm thick including fixing in position anodisedaluminium frame section of 80 x 38 mm x 1.22 mm size box, cutting to the required size with all wastage, labour, lead lift etc. complete.

Providing and fixing in position Panelling for Door and windows jam's made up of 19mm thick waterproof plywood of approved quality make (Century, Commander, Biz,etc.) for sides and exposed parts are finished applied with formica of approved shade sticked with approved quality glue of Fevicol make and abrotape including nails, screws,complete as per detailed drawings and as directed by Engineer in Charge

Providing and fixing frame with/ without ventilator of size as specified with Country cut teak wood for doors and windows including chamfering, rounding, rebating, iron hold fast of size 300mm x 40mm x 5mm with oil painting, etc. complete

First Floor

Second Floor

Third Floor

Fourth Floor

Fifth Floor

Sixth Floor

Providing and fixing solid core flush door single/ double leaf 35mm thick decorative type exterior grade as per detail drawing with approved face laminate 1 mm thick on both faces as approved and as directed with all necessary lipping and with aldrop (15” heavy duty handles with 12” heavy duty latch, 12” tower bolt, 125mm heavy duty hinges, heavy duty stoppers with necessary SS screws, nuts, bolts, oil paint to lipping etc complete as directed by Engineer in charge

First Floor

Second Floor

Third Floor

Fourth Floor

Fifth Floor

Sixth Floor

Providing and fixing solid core flush door single/ double leaf 35mm thick decorative type exterior grade with vision panel having 5 mm glass as per detail drawing with approved face laminate 1 mm thick on both faces as approved and as directed with all necessary lipping and with aldrop (15” heavy duty handles with 12” heavy duty latch, 12” tower bolt, 125mm heavy duty hinges, heavy duty stoppers with necessary SS screws, nuts, bolts, oil paint to lipping etc complete as directed by Engineer in charge

First Floor

Second Floor

Third Floor

Fourth Floor

Fifth Floor

Sixth Floor

Providing and fixing Commercial Flush Door approved quality make (Century, Commander, Bizetc.) for sides with BTC patti size 20mm X 10mm and exposed parts are finished applied with 4mm Plywood base Original wooden plank palliate sheet both side of approved shade sticked with approved quality glue of Fevicol make and abrotape including decorative moulding and Ammonium Thiocyanate Distillate Polish to all the surfaces with approved pattern of S S Finish Brass door Accessories, 15" handles and approved quality nails, screws, complete as per detailed drawings and as directed by Engineer in Charge

First Floor

Second Floor

Third Floor

Fourth Floor

Providing and Fixing 30 MM thick BOTH SIDE PRELAMINATED SOLID PANEL PVC DOOR SHUTTER consisting of frame made out of M.S tubes of 19 guage thickness and, size 19 x 19 mm for styles and 15 x15 mm for the top and bottom rails, M.S frame shall have a coat of metal primer of approved make and manufacture. M.S frame shall be covered with heat moulded PVC 'C' channel made from 5 mm (+/0.25) thick prelaminated sheet of density 600 kg/cbm ,of size 30mm thickness 70mm width out of which 50mm shall be flat and 20mm shall be tapered in 45? angle on either side forming stiles ; and 5 mm thick ,95 mm wide PVC sheet out of which 75 mm shall be falt and 20 mm shall be tapered in 45 on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be falt and 20 mm shall be tapered on both sides to form lock rail.Top,bottom and lock rail shall be provided either side of the panel. An additional 5 mm (+/0.25) thick PVC strip of 20 mm width is to be stuck on the bottom side of the ' c ' channel prelaminated panelling of 5 mm (+/0.25) thick PVC sheet to be fitted inside the M.S. frame welded/ sealed to the styles and rails with 5 mm (+/0.25) x 30 mm PVC sheet beading on either side and joined together with solvent cementadhesive etc ,10 mm thickness (5 mm (+/0.25) x 2 nos ) 20 mm wide cross PVC sheet as gap insert for the rail and bottom rail. Door to be fixed to frames with 3 nos M.S.powder coated

First Floor

Second Floor

Third Floor

Fourth Floor

Fifth Floor

Sixth Floor

Providing and fixing in position Entrance Main Door Shutter made up of 3mm to 19mm thick plywood of approved quality make (Century, Commander, Biz, etc.) for sides and exposed parts are finished applied with 4mm plywood base Original wooden plank Palliate Sheet of approved shade sticked withapproved quality glue of Fevicol make and abrotape including Ammonium Thiocyanate Distillate Polish to all the PalliateSheet Exposed surfaces with PU Finish and necessary fittings nails, screws, the shutter frame having 8mm glass make of (Modiguard, saint Gobain, etc.) complete as per detailed drawings and as directed by Engineer in Charge.

Providing and fixing in position, Double shuttered aluminium extruded powder coated openable door of specified size with aluminium door frame of powder coated section 101.60 x 44.75mm,3.18mm thick and shutter comprising of powder coated section having bottom and lock rail of size 150mm x44.5mm x3.00mm thick top rails 47.62x44.45mm x3.00mm thick, vertical style 47.62x44.45mm, 3.00mm thick and for shutter plain glass panes 5mm thick for top panels and 12mm thick both side laminated phenol bonded particle board panels for bottom panels etc., I.S.I. mark, heavy duty, Hydraulic floor spring of 150 Kilogram capacity, having heavy duty concealed lock, necessary beading, glazing clips, PVC gaskets, 250mm length aluminium tower bolts, 150mm dia. pad handle, etc. as per detailed design and drawing or as directed by engineer incharge including all materials, labours, and equipment etc.complete.

First Floor

Second Floor

Third Floor

Fourth Floor

Fifth Floor

Sixth Floor

a) Fire Door 45mm 1HR FRL (60/60) 3 Criteria - INTEGRITY / INSULATION/ STABILITY WOODEN DOOR - Fire Door Tested in accordance to IS: 3614 Part 2 Providing of Tufwud make 60 min Fire rated doors system duly tested for 3 criteria - Integrity, Insulation and Stability Criteria as per the IS: 3614 Part 2 and BS: 476 part 22 at National Test House, Govt of India labroatory and/or with Central Building Research Institute, Govt of India undertaking with standard heating conditions as specified in IS:3614 Part II 1992 and BS: 476 part 20 & 22 1987 to achieve the required integrity, insulation and stability (i.e. to restrict the heat radiation, temperature rise on the non fire side to the maximum of 140° C above the ambient temperature on the exposed surface of the shutter. The fire doors are tested with NCBN technology ("Non Combustible by Nature"). with prior approval of concerned Superintending Engineer. A) Door Frame: Supplying 'Tufwud' brand frames for Fire resistant door shutters 1st class Malaysian Hardwood Frame densified (810 kg/cum) and pressure treated with fire retardant chemicals in vacuum impregnation vessel under 160 psi pressure as per IS:401and kiln seasoned to moisture below 15% as per IS:1141 of section 120 X 60 mm spray quoted with 2 coats of intumescent paint of minimum 200 micron, with single row of Brush- Type ASTROFLAME intumescent strip of size 10mm x 4mm affixed in the slit of the Frame for fire and smoke sealing, etc. complete.

First floor

Second Floor

Third Floor

Fourth Floor

Fifth Floor

Sixth Floor

b) Shutter : Providing of 65mm thick asbestos free composite - 3 criteria - fire, heat and smoke check Acoustic Door Shutter with flame guard of 120 minutes IS3614 part -II comprising of 2x9mm Calcium Silicate boards, Chemical treated internal timber with Fire retardant chemicals in pressure impregnation vessels under 160 PSI pressure as per IS:401and kiln seasoned to moisture below 15% as per IS:1141 frame work of 100x32 mm with 32mm thick infill of ceramic fiber (density 128Kgs/CMT), vermiculite mix faced with 6mm Fire retardant High Density ply, internally lipped with hardwood beading, and pasted in Hydraulic Press under 50 tonnes pressure, spray quoted with 2 coats of In tumescent paint of minimum 200 micron, and with 1 row of Brush- Type Astroflame® intumescent strip (imported) of size 10mmx4mm concealed for fire and smoke sealing in the grooves in the shutter on all edges except bottom, without any external lipping.

First floor

Second Floor

Third Floor

Fourth Floor

Fifth Floor

Sixth Floor

c) Vision Panel: 1 HR rated E Class clear high stress fire rated glass is pre fabricated strategically inside the shutter structure with 10 mm inside the shutter on all sides with Uglazing. An additional insulated powder coated 'Z' channel of 16 swg MS sheet to be fixed for reinforcement of the joints. With clear fire resistant glass panes 11mm thick having minimum 120 minutes fire Description

First floor

Second Floor

Third Floor

Fourth Floor

Fifth Floor

Sixth Floor

Providing and Fixing mat finish stainless steel (of 302 grade ) railing with top pipe of 50 mm dia. and vertical pipe of 38 mm dia at 0.60 m c/c or as required and horizontal pipes of 25 mm dia in three rows, all pipes of 2 mm thick including buffing,fabricating fixtures and fastening including pipe base of appropriate diameter and ball base of 75 mm dia above newel post of 75 mm diameter etc. complete (Prior approval of sample and brand by Ex.Engineer is necessary before use)

First floor

Second Floor

Third Floor

Fourth Floor

Fifth Floor

Sixth Floor

Providing and fixing best quality 950 high GRC railing in accordance to the dimensions mentioned in drawings of proved maked equivalent. While Portland Cement manufactured by ‘JK Cement’ or equivalent , Quartz , Fine Silica Sand, Allkali Resistant Glass Fiber manufactured by ‘Saint Gobain’ or equivalent , super Plasticisers manufactured by BASF or equivalent and U.V resistant Synthetic inorganic pigments should be used for pigmentation manufactured by ‘BAYFERROX’(Germany) or equivalent. The material casting should take place in synthetic Rubbe/FRP Mould manufactured by ‘reckli’ or equivalen.The fixing of jali should be ‘Dry fixing’ i.e to be done with stainless.

Providing and fixing 40mm diameter and 1.5mm thick Stainless steel hand railing in S.S.304 Grade including fabricating, fixtures, erecting, necessary welding, grinding, finishing, buffing to stainless steel pipe etc. complete

First floor

Second Floor

Third Floor

Fourth Floor

Fifth Floor

Sixth Floor

Providing and fixing 900mm high S.S.304 Grade Stainless steel railing with 40mm diameter and 1.5mm thick at top,40mm diameter and 1.5mm thick vertical supports spaced at 1.5m center to center and 8mm thick toughened glass including fabricating ,fixtures, erecting , necessary welding , grinding , finishing, buffing to stainless steel pipe etc. complete

Second Floor

Third Floor

Fourth Floor

Fifth Floor

Sixth Floor

Providing structural steel work of rectangular hollow steel section for steel trusses, other similar trussed items like purlin and members with all bracing, gusset plates etc. as per detailed designs and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted/bolted/ welded connections and one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade complete. Spec. No.: As directed by Engineer-in-charge.

Providing and fixing mild steel grill work for windows, ventilators etc. 20 kg/sqm as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete.

First floor

Second Floor

Third Floor

Fourth Floor

Fifth Floor

Sixth Floor

Providing and fixing collapsible steel gate in one / two leaves with hot rolled vertical channels of 18 x 9 x 3 mm minimum size, crossings of M.S. flats of size 18 x 5 mm T or E section for runner of minimum 40 x 6 mm size for flange, M.S. flat for top runner of minimum size 40 x 12 mm with roller wheels confirming to grade F.G. 150 fitted with snap headed rivets of minimum size 6 mm max. spacing of vertical channels be 100 mm enclosed gate position and clear space of 150 mm between two sets of crossings with hold fasts, stoppers, spaces, handles, locking arrangement and one coat of red lead primer & oil painting etc. complete. (I.S. 10521-1983).

Providing and fixing rolling shutter fabricated from steel laths of minimum thickness 0.9 mm with lock plate of 3.15 mm thickness reinforced with 35 x 35 x 5 mm angle section fitted with sliding bolts and handles for both sides, deep M.S. channel section of depth and thickness not less than 65 mm and 3.15 mm respectively with hold fast arrangements, M.S. Bracket plate 300 x 300 x 3.15 mm minimum size and shape with square bar, suspension shaft of minimum 32 mm diameter, hood cover of M.S. sheet not less than 0.9 mm thickness and of any size at top and safety devices including mechanical gear operation arrangement consisting of worm gear wheels and worms of high grade cast iron or mild steel and one coat of red lead primer etc. complete. (I.S. 62481979) (Without mechanical gear)

Providing and fixing 6 mm polycarbonate multiwall Ultra-Voilet protected sheet for roofing over fabricated steel structure as per detailed design, including fixing the polycarbonate sheet with alluminium angle and flat anodised and dyed as per approved shade including all water proofing materials, nuts bolts hardware, labour including all scaffolding etc. as required. (Only actual area of polycarborate sheets to be considered for measurements).

Design, structural calculation, fabrication and installation of steel structure (vertical column, horizontal ring beam, main steel Arch. inclined Arch. etc.) for roof cover with white colour / translucent both sides PVDF tensile polyester fabric as shown in general arrangement drawing attached with the bid. The offer should be of fabrication and supply of structural steel and cables fittings for the tensioned membrane structure. The offer should be inclusive of C.N.C. based laser and plazma cut members / plates along with special edge finish. The structure shall be composed of the steel arches, pre-stressed cable systems as shown in the drawing holding the membrane as well as glass panels. The glass panels will be fixed on the lateral members connecting the pair of arches inclusive of necessary hardware, fittings and joinery details etc. all complete. All the dimensions and rise of arch etc. shall be as per the G.A. drawings. Membrane procurement, fabrication and installation with edge cable and tension accessories fittings and fixtures. The main supporting ring beams are to be provided made out of four plates of necessary sizes as per the structural analysis and design. All the structure steel shall be furnished with acrylic polysiloxane coatings for high performance aesthetics and anticorrosion protection. The offer shall include cost of all material, labour, transportation,all type of taxes and overhead charge etc. Testing charges of all tests on material and fabrication parts as per specification and direction of Engineer in charge. The work shall be carried out as per approved drawings, condition and direction of Engineer in charge

Providing and fixing Ductile iron ManHole Covers/Strom Water Grating and Grating with frame of Various sizes, weight and types and load bearing capacity as per EN-124, equivalent NECO with prior approval of concerned Superitending Engineer.

Structural glazing - Proving supplying and fixing aluminium structural glazing using approved make verticals 115.90mm x 57mm and horizontals (as structurally required for a maximum horizontal span of 1200mm) double loop multiwall holding sections with graphite grey powder coating sections, 2.8mm thick openable shutter section 18mm x 40mm tied to RCC wall and column surfaces. G.I. L brackets, anchor fasteners, bolts, nuts, screws and fixing 6mm one way reflective glass with 6mm x 6mm double sided tape and approved structural sealant as per Architect’s specifications and drawing etc. complete

GRC Cladding - Providing and fixing Glass Reinforced Concrete (G.R.C) n accordance to the dimensions mentioned in drawings of proved maked equivalent. While Portland Cement manufactured by ‘JK Cement’ or equivalent , Quartz , Fine Silica Sand, Allkali Resistant Glass Fiber manufactured by ‘Saint Gobain’ or equivalent , super Plasticisers manufactured by BASF or equivalent and U.V resistant Synthetic inorganic pigments should be used for pigmentation manufactured by ‘BAYFERROX’(Germany) or equivalent. The material casting should take place in synthetic Rubbe/FRP Mould manufactured by ‘reckli’ or equivalen.The fixing of jali should be ‘Dry fixing’ i.e to be done with stainless.

First floor

Second Floor

Third Floor

Fourth Floor

Fifth Floor

Sixth Floor

Providing and Fixing Processed Stone Cladding on wall surface/ plywood surface RCC pardi /Wall and all type o fInterior, Exterior Compound wall and Gate etc. of cladding processed stone with material of Processed clay, Wooden chips, Silica sand, Cement, GFRC admixtures, Colour pigments, Fiber upto thick of 230mm /25mm including scaffolding, fixing of screw, etc. (As directed by Engineer in Charge)

First floor

Second Floor

Third Floor

Fourth Floor

Fifth Floor

Sixth Floor

Dry wall cladding with clay tile; Designing, supplying and fixing of Clay tile of Wienerberger (Red Series or Grey Series) or Equivalent with suitable size and thickness not less than 20 mm as per manufacturer with approved colour and pattern with composition of finest powdered clay and colour mixtures. The clay tile shall be fixed on the suitable farming system by using continuous aluminium profiled section as per manufacturer with suitable size and spacing to withstand the structural design criteria specifled in the technical specification by using necessary HDG brackets, SS316 grade anchor bolts etc as per manufacturer specification. Cladding joints should be with open groove system. with prior approval of concerned Superitending Engineer.

Providing & fixing door closer for closing of doors with cap. To sustain weight of door of make tweka or similar type of ISI make

Providing & fixing Conceal door closer for closing of doors with cap. To sustain weight of door of make tweka or similar type of ISI make

Providing and fixing 12mm Plain Glass make of (Modiguard, Saint Gobain,etc) with cutting of edges with diamond polish fixed with Folding Bracket made up of brass oxidised as per specifications etc. complete.

Providing & fixing floor spring for opening of doors with cap. To sustain weight of 16.5 kg and 50000cycles of make tweka or similar type of ISI make

Supplying and installing Office Signages Glass /SS with Vinyl as per Rooms cabin as per Architects drawing and approved as Directed by Engineer-in-charge etc, complete.

Providing and applying, Designer 160 GSM Wall Paper approved quality, colour and Design to new surface including, scaffolding, preparing the surface (excluding primer coat)(Prior approval of sample and brand to be verify by Engineer in charge is necessary before use.)

Providing and fixing wooden flooring with imported make venner paper fixed on MDF board of 8mmthick and width of 200mmU Shaped Notch to old the sheets in perfect floorigdesignbrand of Stilex Wooden moulding of imported make veneer paper fixed on MDF wood with finished edgeswhich is used at the end of wooden flooring and to the notches for affixing the wood to the flooring with 8mm Hilton n=below flooring and rubber adhesive to stick (Sample to be

Office cum Computer Table made up of 3mm to 19mm thick waterproof plywood make (Century, Commander, Biz,etc.) for sides and table top and inner surfaces finished applied with Laminate of approved shade and sticked with approved quality glue of Fevicol including necessary telescopic channel, making of holes in plywood, desk hole for computer cables, Plastic Computer Desk Grommet Cable Hole Cover, cabrotape nails, screws,complete as per detailed drawings and as directed by Engineer in Charge

Office Side runner table made up of 3mm to 19mm thick waterproof plywood make (Century, Commander, Biz,etc.) for sides and table top and inner surfaces finished applied with Laminate of approved shade and sticked with approved quality glue of Fevicol including necessary sliding tracks along with sliding doors, cabrotape nails, screws,complete . Measurement shall be on plan area basis. as per detailed drawings and as directed by Engineer in Charge.

Providing and fixing in position Reception table made up of 3mm to 19mm thick waterproof plywood make (Century, Commander, Biz,etc.) for sides and table top and internal surfaces finished with Formica approved make as directed by the Engineer in Charge including decorative moulding in required position drawer slider (telescopic channel make of Solo, Polo and such other company) knob, handles required multipurpose lock complete as per detailed drawings and as directed.

Providing and fixing in position Dining table made up of 3mm to 19mm thick waterproof plywood make (Century, Commander, Biz,etc.) for sides and table top and internal surfaces finished with Formica approved make as directed by the Engineer in Charge including decorative moulding in required position etc complete as per detailed drawings and as directed by engineer in charge.

Providing and fixing in position Study Table of 0.60mtr X 1.20mtr made up of 3mm to 19mm thick waterproof plywood make (Century, Commander, Biz,etc.) for sides and table top and inner surfaces finished with Formica of approved shade and sticked with approved quality glue of Fevicol make including abrotape nails, screws, complete as per detailed drawings and as directed by Engineer in Charge

Providing and fixing bed side unit/dressing unit with necessary supporting system to fix on wall/wall paneling of 0.90 mtr in length, 100mm/150mm in height and 0.45 mtr wide platform of plywood aving drawer unit fixed in 35mm four side paneling. For sides and unit top surfaces, inner sides are covered with Formica and sticked with approved quality glue of favicol make and including abrotape nails, screws, complete as per detailed drawings and as directed by Engineer in Charge.

Providing and preparing Cupboard of size 2.1meter height, and 0.9 meter in width and 0.6 meter in depth, using 19 mm thick marine ply for all sides for preparing box ( back, sides , top and bottom ) , with 12 mm thick ply for internal shelfs purpose with white laminate inside surfaces and color laminate to out side surfaces with providing 19 mm thick marine ply for shutters to be fixed at front side doors with teak wood beding , door to be finished with laminate as per drawing , internal drawer will be made of 12 mm thick burma ply to all sides of drawer , front side of drawer to be finish with laminate and drawer internal surfaces will be finish white laminate , using telephonic channels fevicol , stainless steel screws, stainless steel hinges and bolts, wire nails , wooden polish for teak wood beding , and with required main handles for doors , handles for drawers and locking arrangment for wardrobe doors , and internal locker with magnetic ball catch arrangment complete, steel rod for hanging the cloth hangers . as per drawing and design complete & as directed by engineer in-charge.( measurement as per Elavational front area basis only.)

Side Rack made up of 3mm to 19mm thick waterproof plywood make (Century, Commander, Biz,etc.) for sides and table top and inner surfaces finished applied with Laminate of approved shade and sticked with approved quality glue of Fevicol including necessary sliding tracks along with sliding doors, cabrotape nails, screws,complete . Measurement shall be on elevation basis. as per detailed drawings and as directed by Engineer in Charge.

Fixing in position Storage 0.90mtr lenght, 1.2mtr height and 0.45mtr breadth made up of 18mm thick novapan Regular board melamine faced prelaminated partical board one side(12823 Gr.II, type II ) consisting of six compartments with shutter . Egdes sides and top stick with aminated to top, shutters with Fevicol of approved quality at the rate of 0.50 kg/sqm to formica and 0.20 kg\sqm to novapan, and nails, screws, handels, locks of godrej

Providing and fixing in position Box Panelling made up of 19mm thick plywood of approved quality make (Like Greenply,Century, Commander, Biz,etc.) for sides and exposed parts are finished applied with palliate sheet of approved shade sticked with approved quality glue of Fevicol make and abrotape including Ammonium Thoicyanate Distillate polish of all surface Nails,screws,complete as per detailed drawings and as directed by Engineer in Charge

Providing and fixing in position Wall Panelling made up of 12mm & 19mm thick plywood of approved quality make (Like Greenply,Century, Commander, Biz,etc.) for sides and exposed parts are finished applied with Formica of approved shade sticked with approved quality glue of Fevicol make and abrotape to all the surfaces with necessary fittings nails, screws, complete as per detailed drawings and as directed by Engineer in Charge

Providing and fixing in position Partition for corporate cabins made up of Bracing of 19mm 3 piece Waterproof ply 0.25 x 0.25mt Partitions and laying 9mm thick waterproof plywood make (Like Greenply,Century, Commander, Biz,etc.) on Bracing and exposed parts are covered with Formica finished and top with 12mm ply etc. Complete as directed by Engineer in charge

Providing and fixing glass fitting ( Glazing ) using spider fitting of required size and shape using necessary fixtures such as bolts,nuts etc. complete as directed by engineer in Charge.

Providing and fixing toughned glass partitions from 6mm to 12mm thick with all necessary stainless steel fixtures & pivot arrangement etc.complete. Spec. No. As directed by Engineer in charge.

Providing ,fixing& supplying 4 mm thick designer palliate sheet of approved make for fixing as directed by engineer incharge.

Providing ,fixing& supplying ply 19 mm thick & fixing as directed by engineer incharge.

Providing ,fixing& supplying ply 12 mm thick & fixing as directed by engineer incharge.

Providing, fixing & supplying marine ply 8 mm thick &fixing as directed by engineer incharge.

Providing and applying melamine polish of required finish to the wood work by spray machine including knotting and preparing the even surface by scraping, applying French polish , scaffolding if required etc. complete. Note:The work to be executed on prior approval of Superintending Engineer will be necessary.

Providing and Fixing High Back Executive Chair Revolving Chair having very Soft cushioning with recron and highest quality leather fabric which handrest with wooden and melamine polished to give comfort set at proper place etc complete as directed by Engineer in Charge

Providing and Fixing Medium Back Revolving Chair with Push back Mechanism Office Chairs having soft cushioning effect with lether / cloth to feel comfort PVC handrest are fittedetc complete as directed by Engineer in Charge

Providing and fixing Nilkamal Shell Chairs has Upholstered seat insert, Pneumatic seat height swivel Back features, designed-in lumbar support, polymer seat and back shell with padded upholstered seat,7/16-inches solid steel rod fixed arm and frame as directed by Engineer in harge.

Supplying of Outdoor Table & four Chair in PE Rattan VF GA 4040 (Table)1000X1000 mm of ventura (model Number VF GA4040 / A 35)as per Directed By Engineer Incharge

Providing & fixing Classic Bench - Area (0.6M X 1.5M), 3 Adults item consists of ISI marked structure.

Providing and fixing in position sofa for one seater made upof 19mm waterproof plywood of approved quality make (Century, Commander, Biz,etc.) finished with wooden legs sticked with approved quality of glue of Fevicol make and back fixed to wall cushioned with and on top 50mm & 10mm foam pasted over Waterproof Plywood and tighten with elastic belt (Feather Make) using approved quality rubber adhesive make of Spabe and recron used Reliance Grade 448 GG is provided covered with approved quality crushed leather fabric of (Weitisi, Monatana 9043) and approved quality and various types nails, screws,etc. Complete as directed by Engineer in charge

Providing and fixing in position sofa for two seater made upof 19mm waterproof plywood of approved quality make (Century, Commander, Biz,etc.) finished with wooden legs sticked with approved quality of glue of Fevicol make and back fixed to wall cushioned with and on top 50mm & 10mm foam pasted over Waterproof Plywood and tighten with elastic belt (Feather Make) using approved quality rubber adhesive make of Spabe and recron used Reliance Grade 448 GG is provided covered with approved quality crushed leather fabric of (Weitisi, Monatana 9043) and approved quality and various types nails, screws,etc. Complete as directed by Engineer in charge

Providing and fixing in position sofa For Three seater made upof 19mm waterproof plywood of approved quality make (Century, Commander, Biz,etc.) finished with wooden legs sticked with approved quality of glue of Fevicol make and back fixed to wall cushioned with and on top 50mm & 10mm foam pasted over Waterproof Plywood and tighten with elastic belt (Feather Make) using approved quality rubber adhesive make of Spabe and recron used Reliance Grade 448 GG is provided covered with approved quality crushed leather fabric of (Weitisi, Monatana 9043) and approved quality and various types nails, screws,etc. Complete as directed by Engineer in charge

Antique wooden centre table to size 0.70 x 0.70 x 0.45mtr with glass top

Antiqu wooden centre table to size 0.45 x 0.60 x 0.45 mtr with glass top

Antique wooden Corner table to size 0.45 x 0.45 x 0.45 mtr with glass top

Providing & fixing in position main curtain make of (GM/ Bombay dying or equivalent) of 0.75 m in width with balance road of approved quality & other required fixtures applied with power coating etc. provided with tussels to hold the curtain at one side of the wall, necessary feetings complete as directed by Engineer Incharge.

Providing & fixing in position sheer curtain make of (GM/ Bombay dying or equivalent) of 0.75 m in width with balance road of approved quality & other required fixtures applied with power coating etc. provided with tussels to hold the curtain at one side of the wall, necessary feetings complete as directed by Engineer Incharge.

Suppying and fixing vertical / roller blinds on windows made out of imported fibrics and rollers with level for rotic movement and stairing for side movement fitted in matching powder coated aluminium channel fixed in mannartio insure smooth operation as per Architect.s drawing and make approved as Directed by Engineer-in-charge etc.complete.

Providing cement based water proofing treatment to terraces (Indian water proofing or alike) with brick bats laid in required slope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with approved waterproofing compound and laying the brickbats on bottom layer in C.M. 1:5 admixed with approved waterproofing compound filling upto half depth of brickbats, curing this layer for 3 days, applying cement slurry over this layer joints of brickbats with C.M. 1:3 admixed with approved water proofing compound and finally top finishing with average 20mm. thick layers of same mortar added with jute fiber at 1 Kilogram per bag including finishing the surface smooth with cement slurry admixed with approved waterproofing compound. Marking finished surface with false squares of 300mm x300mm. making the junctions at the parapet rounded and tapered top for required height, with drip mould at the junction of plaster and parapet and curing and covering 10 years Guarantee against leak proofness on Cour fee stamp paper of Rs.500/- including ponding test etc. complete.

Providing and laying jointless Polydee-LM, a highly flexible elastometric coating for RCC/ cementitious surface for terrace waterproofing on B.B.Coba /R.C.C, after application of TP-42 Primer on perfectly clean surface (free from loose dust and foreign matter) application of 1st coat of Polydee-LM @ 700gms/ One Square Metre and applying 2nd coat of Polydee-LM @ 700gms/ One Square Metre and finishing the same with sprinkling the AG-10 granules on the wet coating. (After finishing covering the treatment with 25mm cement plaster for protection with fibrillated 6mm Ply plastfibre @ 125 gms /One Square Metre to be paid in separate item.) covering 7 years guarantee on Court Fee Stamp Paper of Rs. 100/- etc. complete.

PICC filling for Honey combing area atconcrete surface:-Providing and applying PolyIronite Ceramic Cementitious (PICC) material of Self cureing, High Abrasion resistant, Non shrink, High strength, UV resistant, repair mortar coating on Kelox water missble epoxy of concrete surface fill the honey combing area etc. on tacky primer coat upto 10mm thickness or as per the surface conditions including Cleaning the concrete surface of bridge by grinding the surface by grinder machine with wire brush/ diamond wheel, removing existing loose particles etc. by using grinder, wire brush, breaker machine, water jet (using other mechanical/ manual means) also removing of algae fungi by special chemical of clonon. etc. complete with all leads and lifts, Material, Machinery, Labour, Scaffolding etc. complete as per specification and as directed by engineer-in-charge.

Providing and laying in place 300 mmx 300 mmx 9.8 mm vitrified tactile warning and directional tiles of the approved brand, make and colour inside the buildings at in all corridors and lobbies, level differences etc. as per accessibility standards and as per the installation instructions prescribed by the manufacturer including zarri making wherever required and finishing including grouting the joints with white cement with matching pigments etc. up to the satisfaction of the engineer in charge complete.

Providing & fixing mural with art work in Fibre Reinforced Plastic material with 25 mm to 300 mm minimum embossed made up of rooflight resin and fibre glass including clay modelling, moulding& casting as per design & drawing etc. complete.

Providing and fixing Wooden Photo frames on wall including screwing, Prints on imported make canvas with matt finishing having wooden moulding to the sides of frames minium 35 mm thick with glossy / matt 4 mm Glass and artistic finish photo picture chosen by Engineer in Charge

Providing and laying damp proof course 50 mm thick in M20 cement concrete layer and bitumen / using cement with waterproofing compound curing, formwork etc. complete.

Providing water proof bedding for flooring of Bath and WC 25 mm thick in C.M. 1:3 including using approved water proofing compound in specified proportion as per manufacturers specifications for per bag of cement including leveling, curing and covering 10 years guarantee on court fee stamp paper of Rs.500/- including ponding test etc complete.

Labour charges for providing groove in external plaster having width and spaced as directed by engineer incharge etc. complete.

Providing and erecting Y type barbed wire fencing with seven rows of wire with 2.45 mm dia G.I. pipe (Rezan/ concentiDeletedire 0.75 mm dia) with hot dip and G.I. coated hooks as per drawing supported on M.S. angle 50x50x6 mm at 2.5 mtr. c/c including fixing and fastening with wire, painting M.S. angles with one coat of red lead primer and two coat of oil paint etc. complete

Providing and fixing plain galvanised iron sheets of 0.63mm thick (24 B.W.G.) for roofing without wind tiles including fastening with galvanised iron screws and bolts, lead and bitumen washers as per drawing etc. complete.(Weight of 5.5 kg/sq.m.).

Providing and fixing E board for roof work of approved quality size 900mm x 1200mm x 16mm fixing on M. S. horizontal batterns of 25mm x 25mm over the sloping truss members all iron work and polishing the battens & screwing with self trapping screw etc. complete.

Providing, fabricating and supplying and fixing panels of aluminium composite panel (ACP) cladding in pan shape in metaliccolour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two aluminium sheets (each 0.50 mm thick). The aluminium composite panel cladding sheet shall be coil coated with kynar 500 base PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face 1 and polymer (service) coating on face 2 as specified using steinless steel screws, nuts, bolts, washers, cleats, weather silicon, sealent, backerrods etc. The supporting frame structurre shall be made of aluminium rectangular section 38x38mm. The fastening brackets of aluminium alloy 6005 T5/ MS with hot deep galvinised with serrations and serrated washers to arrest the witn load movement, fasteners, SS 316 pins and anchor bolts of approved make in SS 316, nylon separators to prevent bi-metallic contacts or complete required to perform as per specification and drawing. (Prior Approval from S.E.'s essential)

Providing and fixing 90 cm x 60 cm Granite plate engraving 10 cm. height letter, figures including painting the lefters/figures with approved colour and shade complete

Providing and fixing 45 cm wide mild steel ladder of 40mm x 6 mm mild steel flat stringers and steps of 18 mm dia. mild steel bar for water tank including fixing it in (1:2:4) M-15 cement concrete block 60cm x 30cm x 30cm and painting the ladder complete. (Anti Corossive Paint)

Providing and fixing Orissa Pan of size 580x445x260 mm with approved make flush valve including trap, C.I. soil and vent pipe upto outside face of wall including 100mm dia. C.I. plug, bend and necessary pipe connection, etc complete. As directed by Engineer in charge.

First Floor

Second Floor

Third Floor

Fourth Floor

Fifth Floor

Sixth Floor

Providing and fixing white glazed urinal of series with Pressmatic auto closing valve of having 32mm diameter P.V.C. flush pipe with fitting and flushing of approved make and arrangement including lead soil pipe, lead trap & soil pipe connection upto the outside face of wall etc.complete as directed by Engineer in charge.

First Floor

Second Floor

Third Floor

Fourth Floor

Fifth Floor

Sixth Floor

Providing and fixing stainless steel sink of size 600 x 510 x 200 mm incluidng coupling, outlet pipe, elbow and other necessary fitting, finishing etc. complete.

Grab bars- Providing SS grab bars set for accessible toilets comprising of 4nos. Grab bars as specified below. (1nos. wing grab bar + 1nos. L shaped grab bar+ 2nos. straight grab bars = 1 typical set) 27 a) Swing grab bar (1NOS) Providing a S.S. 304 SWING HANDICAP GRAB BAR- 700 mm and of DIA: 32 MM and thickness 1.5 mm of the roved brand and make. 27 b) L Shaped grab bar (1NOS) Providing S.S. 304 L SHAPED DISABLED GRAB BAR of IZE- 600 MM (H) X 600MM (D) and 32 MM DIA. and thickness mm of the approved brand and make. 27c) Straight grab bar (2NOS) Providing S. STEEL 304 GRAB RAIL (600MM), 32 MM DIA. and thickness 1.5 mm of the approved brand and make.

First floor

Second Floor

Third Floor

Fourth Floor

Fifth Floor

Providing and fixing C.P. wall mixer with provision for overhead shower with 115mm long bend pipe and wall flange jaquar or equivalent ?make continental (CAT.NO. CON-273 UPR) including necessary sockets/union nut etc. complete.

Providing and fixing C.P. Angular stop clock with wall flange Jaquar make or equivalent continental (CAT.NO. CON-059) including necessary sockets/union nut etc. complete.

First floor

Second Floor

Third Floor

Fourth Floor

Fifth Floor

Sixth Floor

Providing and fixing C.P. a 2-Way BIB cock with wall flange of approved make including necessary sockets/ union nut etc. complete as directed by Engineer in charge.

First floor

Second Floor

Third Floor

Fourth Floor

Fifth Floor

Sixth Floor

Providing and fixing C.P. pillar cock long neck with aerator jaquar or equivalent make continental (CAT.NO. CON -021) including necessary sockets/union nut etc. complete.

First floor

Second Floor

Third Floor

Fourth Floor

Fifth Floor

Sixth Floor

Providing and fixing C.P. BIB cock with wall flange of approved make including necessary sockets/ union nut etc. complete as directed by Engineer in charge.

Providing and fixing sink cock with regular swinging spout (Wall Mounted Model) with wall flange with approved make incluidng other necessary fitting, etc. complete as directed by Engineer in charge.

Providing and Fixing C.P.Toilet paper holder jaquar make continental (Cat. No. AQ 7751) as per drawing and as per Direction of Engineer Incharge.

First floor

Second Floor

Third Floor

Fourth Floor

Fifth Floor

Sixth Floor

Providing and fixing on walls/ ceiling/ floor 15 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

First floor

Second Floor

Third Floor

Fourth Floor

Fifth Floor

Sixth Floor

Providing and fixing on walls/ceiling/floor 20 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

First floor

Second Floor

Third Floor

Fourth Floor

Fifth Floor

Sixth Floor

Providing and fixing on walls/ ceiling/ floor 25 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Providing and fixing on walls/ ceiling/ floor 32 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

First floor

Second Floor

Third Floor

Fourth Floor

Fifth Floor

Sixth Floor

Providing and fixing on walls /ceiling/ floor 40 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

First floor

Second Floor

Third Floor

Fourth Floor

Fifth Floor

Sixth Floor

Providing and fixing on walls/ ceiling/ floor 50 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete.

Providing and laying in trenches 50mm dai. CPVC pipe including necessary excavation, fittings. Refilling trenches etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Providing and fixing 100 mm diastabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete.

Providing and fixing 75 mm diastabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete

Providing and fixing ISI1729 /2002 grade 75mm dia Cast Iron Waste Water Pipe with lugs necessary fittings such as bends, tees, single junction, double junction, slotted vent, off sets on wall or in to the ground including filling joints with cement mortar 1:2 proportion fixing on wall by means by galvanised Mild Steel bracket of 30x5 mm plate and 8mm square rod with Galvanised Iron clamp with washer as per design drawing and as directed to keep pipe 50mm away from wall including necessary scaffolding and painting the exposed faces with on e coat of red lead oil paint and two coats of gray oil paint including removing the existing pipe if necessary and conveying and stacking in PWD Chowky or as directed by Engineer-in-Charge.

Providing and fixing ISI1729 /2002 grade 100mm dia Cast Iron Waste Water Pipe with lugs necessary fittings such as bends, tees, single junction, double junction, slotted vent, off sets on wall or in to the ground including filling joints with cement mortar 1:2 proportion fixing on wall by means by galvanised Mild Steel bracket of 30x5 mm plate and 8mm square rod with Galvanised Iron clamp with washer as per design drawing and as directed to keep pipe 50mm away from wall including necessary scaffolding and painting the exposed faces with on e coat of red lead oil paint and two coats of gray oil paint including removing the existing pipe if necessary and conveying and stacking in PWD Chowky or as directed by Engineer-in-Charge.

Providing and fixing Table top white wash basin of size 120x635x405mm rubber plugs and brass chain, with pillar cock, C.P.Angular stop cock long thread, continental including S.S. bottle trap of approved make having necessary pipe connection up to theoutside face of the wall.etc complete as directed by Engineer in charge.

First floor

Second Floor

Third Floor

Fourth Floor

Fifth Floor

Sixth Floor

Providing and fixing white european type wall-hung pan, of size 350mm x 355mm x 570 mm concealed flush tank with floormounting frame installing kit and drain pipe connection set for wall hung WC, with approved make square control plates including soil pipe, vent pipe upto the outside face of wall, 100mm dia C.I. plug bend inlet pipe all fittings,cutting & making good walls, floors etc. complete.

First Floor

Second Floor

Third Floor

Fourth Floor

Fifth Floor

Sixth Floor

Providing and fixing P.V.C. Rain water pipes of 160mm outer diameter and having wall thickness of 2.2 to 2.7 mm confirming to I.S. 13592-1992 including proper rainwater receiving recess with P.V.C. plug, bend, necessary fittings, such as, offsets, shoes, including fixing the pipe on wall using approved wooden cleats projecting 25mm to 40mm from face of wall a fixing with clips of approved quality and number ,filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on C.C. or masonry blocks, including necessary scaffolding and maintenance for 3 yrs for any leakages or dislocations of pipes. All the P.V.C. fittings and additional 2 piece socket clips shall be got approved from engineer in charge etc. complete. (The contractor shall give 3 yrs guarantee bond for payment)

Providing and fixing P.V.C. Rain water pipes of 110mm outer diameter and having wall thickness of 2.2 to 2.7 mm confirming to I.S. 13592-1992 including proper rainwater receiving recess with P.V.C. plug, bend, necessary fittings, such as, offsets, shoes, including fixing the pipe on wall using approved wooden cleats projecting 25mm to 40mm from face of wall a fixing with clips of approved quality and number ,filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on C.C. or masonry blocks, including necessary scaffolding and maintenance for 3 yrs for any leakages or dislocations of pipes. All the P.V.C. fittings and additional 2-piece socket clips shall be got approved from engineer in charge etc. complete. (The contractor shall give 3 yrs guarantee bond for payment)

Providing and fixing in position UPVC ultra violet stabilized 110 mm outer diameter cowl dome confirming to I.S.-4985 including making joints with solvent cement etc. complete

Providing and fixing Glass shelf 125 mm wide and 600 mm long with necessary chromium plated brackets providingT.W.gutties etc. complete

Providing and fixing chromium plated towel rod 16 mm dia and 75 cm. in length including all accessories complete.

First Floor

Second Floor

Third Floor

Fourth Floor

Fifth Floor

Providing and fixing 450mm x 550mm size superior type Belgium mirror with 16mm dia. nickel plated towel rod etc. complete.

First Floor

Second Floor

Third Floor

Fourth Floor

Fifth Floor

Sixth Floor

Providing and fixing 15cm x 10cm salt glazed stoneware gully trap in cement concrete 1:4:8 outside the building including cast iron grating in the sink, connecting glazed stoneware pipe, brick masonry chamber with cast iron lid and cast-iron grating for the gully trap.

Providing and fixing reinforced cement concrete cover of size 90 cm x 45 cm with frame over inspection chamber etc. complete. Heavy duty (225 kg)

Providing and constructing Brick Masonry Inspection Chamber 90cm x 45cm x 90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W.pipes, Brick Masonry, plastering from inside and C.I. lid cover of 75 kg with lid and frame fixed in cement concrete.

providing and constructing Brick Masonry Inspection Chamber 60cm x 45cm x 90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W. pipes, Brick Masonry, plastering from inside and with frame fixed in cement concrete with R.C.C. Cover medium duty 140 kg with frame etc complete.

Providing and fixing reinforced cement concrete cover of size Providing and fixing reinforced cement concrete cover of size 60 cm x 45 cm with frame over inspection chamber etc. complete. Medium duty (100 kg)

Providing and fixing 10cm C.I. Nahani Trap including C.I. grating bend and piece of C.I. pipe upto the outside face of the wall complete.

Providing and fixing 10 cm PVC nahani trap with grating etc. complete.

Providing and laying concrete pipes of I.S.NP. class of 225mm diameter in proper line, level and slope including necessary collars, excavation, laying, fixing with collars in cement mortar 1:1 and refilling the trench complete.

Providing and laying concrete pipes of I.S.NP. class of 300mm diameter in proper line, level and slope including necessary collars, excavation, laying, fixing with collars in cement mortar 1:1 and refilling the trench complete.

Providing and laying cement concrete pipe of IS 458:2003 NP-2 class of 450mm diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 and curing etc. complete.

Providing and laying cement concrete pipe of IS 458:2003 NP-2 class of 600mm diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 and curing etc. complete.

Providing and fixing H.D.P container Syntex or alike one piece moulded water tank made out of high density polythyler and built corrugated inclusive of delivery up to destination hoisting and fixing of accessories such as inlet,outlet overflow pipe inclusive of all tanks capacity between 200 to 1000 liters

Providing and Fixing on Site 40 Ltr. Drinking water cooler of approved make including transportation, fitting charges, accessories, etc. complete as directed by engineer in charge.

Providing and making ISI Mark ferrule connection of 50 mm dia. To water main including ferrule coupling cast iron bell mouth cover, built in non-return valve and fixing including excavation and reinstatement complete.

Providing and fixing 50 mm dia meter water meter with non- return valve including strainer, sockets/ unionnut and including water meter box making locking arrangement and lock. (Without chamber)

Providing and fixing mild steel grill railing weighing 15 Kilogram / One Square Metre with PVC hand rail cover and newel post for staircases, including fabricating, fixtures, drilling holes in concrete /other surface, erecting the grill work, necessary welding, fixing by nuts and bolts, fixing PVC handrail cover, with one coat of anticorrosive paint and two coats of oil painting with approved colour and shade, remaking the damaged surface, cleaning, etc. complete. Spec. One Number: As directed by Engineer in charge.

Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. pardi of laying/pumping, compacting and roughening them if pecial finish is to be provided and curing complete.(Excluding reinforcement and structural steel).with fully automatic microprocessor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand

Construction of granular sub -base by providing close graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader/ Paver on prepared surface and compacting with vibratory roller to achieve the desired density, complete as per clause 401 --Plant Mix Method and Grading - I Material

Construction of dry lean cement concrete Sub-base over a prepared sub -grade with coarse and fine aggregate (natural sand/VSI grade finely washed crushed sand) conforming to IS:383, the size of coarse aggregatenot exceeding 25mm,, cement contentnot to be less than150kg/cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpaat 7days, mixed in abatching plant/ Weigh batch mixer, transported to site with all lead sand lifts, laid with a paver with electronic sensor/ by suitable means as approved by Engineer-in -charge, compacting with vibratory roller, finishing, curing and including preparation of sub- grade surface if required etc. complete. with fully automatic microprocessor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete.

Providing and laying in situ cement concrete M -30 with tremix treatment for 200 mm thickness for Concrete Road is including laying plastic sheet for 125 micron thickness with groove cutting of 4 mm wide and 20 mm deep with necessary refilling with bitumen (excluding reinforcement) with Natural sand etc.complete

Supplying and erecting 1 phase 230V,50Hz submersible pump having discharge 130/475 LPM,Head 21/9 m & delivery pipe of necessary diameter erected with necessary H type clamps as per specification no. WP-OSP. Hp not more than 2 HP Qty:- (1working +1stand by)

Providing, Fixing, Testing & Commissioning of Hydro pneumatic pumping system consisting of 2 Numbers of pumps of Kirloskar/equivalent with Variable Speed Drive, Common inlet and out let manifolds, Numbern-return valves and isolating valves for each pump on the outlet side, pressure switches, outlet pressure gauge on the outlet manifold, a control panel to electrically switch on/off the pumps, , pressure vessel, all necessary interconnections for the above items[1 unit = (1 Numbers working + 1 stand by] Duty of each Pump = 3.4 lps @ 30 mtr Head, including all labours, GI pipe inside the pump room, all taxes if any.

Supplying, erecting, testing and commissioning including design of Automation for Tank Level & Bore well pumps Using Programmable Logic Controller system and Establishment Automatic wirless control system for overhead water tank, ground reservoir etc. complete. The system can be divided into four main parts: Level Sensor, PLC(Programmable Logic Controller), Relay and Motor, HMI(Human Machine Interface). The implementation is divided into four parts:- Sensor Positioning, Circuit Design, Ladder Programming & HMI Creation. The results shall be in four situations as Empty tank, Filling tank, Full tank & Draining for all tanks & bore well. The scope consists of providing operation manual, maintainace manual, training for clients team etc. complete. Payment shall be made based on sensor basis. as per Architects drawing/ images and make approved as Directed by Engineer-in-charge etc, complete.

Boring/drilling bore well of 300mm dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and bmitting strata chart/ bore log, including hire & running charges of all equipment’s, tools, plants & machinery required for the job, all complete as per direction of Engineer in charge, upto 90m depth below ground level.

RWH - Shallow Percolation Pit providing, constructing 2.0m deep shallow depth percolation pit comprising of 1.0m dia pre-cast RCC rings, 300mm thick side filling around outside of RCC rings (annular space) with 40mm size boulders including filling of percolation pit up to 0.5m depth (from bottom up) with 25-75mm clean washed gravels followed by 0.5m depth of 10-25mm of clean washed stones followed by 0.5m of washed river fine aggregate (natural sand/crushed sand VSI grade finely washed etc.) including netlon mesh between each gravel/fine aggregate (natural sand/crushed sand VSI grade finely washed etc.) media layer including covering with RCC slab, manhole frame & cover, PVC rungs etc. including arrangement for inlet & outlet pipe, excavation & backfilling as shown in the drawing. The rate shall be inclusive of all labour, material, wastage, scaffolding, transportation, taxes, including all leads, lifts at all levels. All material should be of approved make. All works complete as per the drawing, technical specification and direction of the Engineer in charge

RWH - Recharge Pit Providing and constructing recharge pit of 2.0m deep and 1.0m dia of pre-cast RCC rings with 6.5" dia x 25m deep borewell at the floor of recharge pit including installation of combination of solid /perforated PVC casing pipe wrapped around with netlon mesh including 300mm thick side filling around outside of RCC rings (annular space) with 40mm size boulders including filling of recharge pit up to 0.5m depth with 25-75mm clean washed gravels from bottom up followed by0.5m depth of 10-25mm of clean washed stones followed by 0.5m of washed river fine aggregate (natural sand/crushed sand VSI grade finely washed etc.) including netlon mesh between each gravel/fine aggregate (natural and / crushed sand VSI grade finely washed etc.) media layer including covering with RCC slab, manhole frame & cover, PVC rungs, PVC end-caps, fittings etc. including arrangement for inlet & outlet pipe excavation & backfilling as shown in the drawing.The rate shall be inclusive of all labour, material, wastage, scaffolding, transportation, taxes, including all leads, lifts at all levels. All material should be of approved make. All works complete as per the drawing, technical specification and direction of the Engineer in charge.

Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well-casing pipe of 150mm dia, conforming to IS:12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per the direction of Engineer in charge.

Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well screen pipes with ribs of 100mm dia, conforming to IS:12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per the direction of Engineer in charge.

Supplying, filling, spreading & levelling stone boulders of size range 5cm to 20cm in recharge pit, in the required thickness, for all leads & lifts, all complete as per the direction of Engineer-in-charge.

Supplying, filling, spreading & levelling gravels of size range 5mm to 10mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in charge.

Supplying, filling, spreading & levelling coarse fine aggregate (natural sand/crushed sand VSI grade finely washed etc.) of size range 1.5mm to 2mm in recharge pit, in required thicknessover gravel layer, for all leads & lifts, all complete as per direction of Engineer in charge.

Gravel packing in tube well construction in accordance with IS:4097, including providing gravel: fine/ medium/ coarse, in required grading & sizes as per the actual requirement, all complete as per direction of Engineer in charge.

Providing and Fixing of Mineral Fibre Board Acoustical Suspended Ceiling System with ultima (Bevelled Tegular) Edge Tiles of size 15mm Exposed GRID. The tiles should have Humidity Resistance (RH) of 99%, NRC0.7, Light Reflectance 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Colour White, Fire Performance UK Class 0 / Class 1 (BS 476 pt - 6 &7) in module size of 600 x 600 x 20mm, suitable for Green Building application, with Recycled content of 32%. The tile shall be laid on precoated G.I.channel on XL2 Clip having a web height of 32 mm with 15 mm wide T - section flanges colour white having rotary stitching on all T sections i.e. the Main Runner, 1200 mm and 600 mm Cross Tees with a web height of 32 mm and a load carrying capacity of 7.7 Kgs/M2 and minimum pull out strength of 100 Kgs.. The T Sections have a Galvanizing of 90 grams per M2 and need to be installed with Suspension system. The Tile and Grid system used together should carry a 10 year warranty. products approved as per GRIHA and BS 476 etc. complete.

Providing & Fixing in position Acoustical Doors along with 150x150 mm teak wood frame, doors made from50 mm Teak wood frame 600 x 600 ctoc filled with 1000 Gsm synthetic wool 50mm thick and 3mm Tec sound from both sides,12mm waterproof ply & veneer from both sides, including 150 mm heavy duty SS hinges (Geze/Dorma o req.) 4 no each leaf,with Door - closer (Dorma /Geze or eq.) including cost of required Cut-Outs, decorative mouldings /finishing -items/ melamine polish & Scaffolding as per Architectural & Acoustical Design & Instructions & Complete in all aspects. including all materials labour, finishing etc complete

Providing and Fixing in position 150mm in height Box Platform with frame of 31mm thk Plywood Plank at short span and 19mm thk Plywood Plank at long Span at 150mm c/c on both sides and top surface of it, made with 3mm to 19mm Waterproof plywood approved quality make (Century, Commander, Biz,etc.) and exposed faces are finished with Laminate of approved shade sticked with approved quality glue of Fevicol make and abrotape including decorative moulding and approved quality nails, screws, complete as per detailed drawings and as directed by Engineer in Charge

Providing and fixing 40x40x3 mm SS angle section at cornices on vertical edges of colums and wall where ever required for protection of edges as per directed by Engineer in charge.

Providing & fixing acoustic panelling to wall in glass wool/ racron& perforated acoustic board with 10 mm foam with fabric panel for acoustic panel purpose etc. complete as directed by Engineer in charge.

Providing &Fixing in position, 1000 mm wide Auto-glow Aluminium extruded strips on auditorium steps as per Design & Instructions & Complete in all aspects. Make Piccolo or Nexus

Providing & fixing in position, Carpet more than 800+gsm, made with 100% stain proof fibres of approved make along with 5mm underlay as per Architectural & Acoustical Design & Instructions & Complete in all aspects including all materials labour, finishing etc complete

Preparing instant Lawn(20 cm depth)-Excavating the ground to a required depth of 20cms, removing & conveying unwanted stuff to a required distance as directed. Filling fresh garden soil/silt & manure in excavated area in 3:1 proportion to a height of 20cms. Mixing garden soil and manure thoroughly well, leveling, and watering on previous night. Planting required variety of lawn grass as directed and maintaining till well established by watering, weeding, clipping, rolling, etc. complete.

Preparing Edging or Border: - Excavating the ground to a required depth of 20 cms. in the required area., removing and conveying unwanted stuff, rubbish to the required distance as directed. Filling the excavated part with fresh soil and manure in 3:1 proportion to a required height to 20 cms. Mixing, levelling, and watering the same. Planting rooted edging/border plants at distance of 20 cms. apart watering, weeding, stirring of soil, replacing casualties, pruning if necessary, etc. complete.

Planting large flowering/Shady trees(Ht. 2 mtr.):-Digging pit with size 0.9m x 0.9m x 0.9m,removing and conveying unwanted stuff to a required distance as directed. Filling the pit with approved excavated material upto a height of 0.30m. and remaining height of 0.60m.with fresh garden soil & manure in 3:1 proportion. Mixing soil & manure thoroughly well, levelling, as directed, watering previous night, planting two- to three-year-old minimum 2.0 Mtr. height, healthy trees sapling as per specifications. Maintaining till well established by watering, weeding, stirring of soil replacing of casualties etc. complete.

Preparing ground covers; -Excavating the ground to a required depth of 20cms.Removing & conveying unwanted stuff, rubbish to the required distance as directed. Filling the Excavated area with fresh garden soil &F.Y. Manure in 3:1 proportion to a height of 20 cms. Mixing, levelling, and watering the same previous night. Planting suitable ground covers as directed in staggering pattern, distance between two rows 25 cms, watering & maintaining till well established

Providing and Laying factory made coloured chamfered edge Cement concrete grass paver blocks of required strength,thickness & size/shape, made by table vibratory method using PU mould, laid in required colour& pattern over 50mm thick compacted bed of fine fine aggregate (natural sand/crushed sand VSI grade finely washed etc.), compacting and proper mbedding/laying of inter locking paver blocks into the fine aggregate (natural sand/crushed sand VSI grade finely washed etc.) bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine aggregate (natural sand/crushed sand VSI grade finely washed etc.) and cutting of paver blocks as per required size and pattern, finishing and sweeping extra fine aggregate (natural sand/crushed sand VSI grade finely washed etc.) and complete as per manufacturer specifications & direction of Engineer-in-Charge. 60mm thick CC paver block of M-35 grade concrete with approved colour and design & pattern.

Royalty Charges as per Revenue and Forest Department's notification dated 11/02/2010 as Maharashtra Minor Mineral Extraction Rules, 2010 and as per instruction in general notes on SSR 2017-2018 in P.W. Sanctioned schedule of rates for year 2017-2018 for items of lime stone, lime shell, stones, rubble, stone dust, shingles, gravel, murum, kankar, ordinary clay, ordinary earth (to be used for embankment and filling), slate and shell etc. Spec. No.: As directed by Engineer-in-charge.

Laboratory testing Charges required for material testing on the basis of testing frequency and charges fixed by Vigilance and quality control circle, Pune for the year 2017-18, as per S. E., Vigilance and quality control Circle, Pune, Letter No. 844, dated30.06.2017

A) Coarse aggregate

Water absorption, specific gravity, impact value, crushing value

Sieve analysis

Abrasion value

Flakiness index/Elongation index

Stripping value

Soundness

B) Sand

Fineness modulus (Sieve analysis), silt & clay content

Chloride & Sulphate content

Silt factor

C) Cement

Standard consistency, fineness specific gravity, setting time, comp. strength, soundness

D) Bricks

Water Absorption (Set of 5 Bricks), Compressive Strength(Set of 5 Bricks), Efflorescence (Set of 5 Bricks}.

E) AAC Block

Density Test(Set of 3 Block),Compressive Strength( Set of 8 Block) , Water Absorption (Set of 3 Block),

F) CERAMIC TILES I VITRIFIED TILES

Water Absorption, Modulus of Rupture (Set of 6 Tiles)

G) Flooring of natural stone (Kota, Marble, Granite, Tandur)

Water absorption, Specific gravity

H) MANGLORE TILES

I) CONCRETE

Compressive Strength OF C.C. Cube (Set of 3 cubes)

J) Concrete Mix Design

With all Tests on basic materials)

K) STONE RUBBLE

Crushing Value/Compressive Strength, Water Absorption & Specific Gravity,

L) Wood

Density & moisture content

M) SOIL/MURUM

Sieve Analysis

Liquid limit & plastic Limit.

Compaction Test (Proctor Density ).

C.B.R. Test (Lab) With compaction test.

C.B.R. Test (Field Determination Test) Excluding Transportation. As per IS 2720 Part XXXI

N) STEEL BAR TESTING

Above 16 mm (Set of 3 Bars) (Tensile strength, %, Elongation, Yield Stress, Weight-Per Meter, Bend I Rebend Test, Proof Stress.)

Upto 16 mm (Set of 3 Bars

Nitrol Solution Test. (Set of 3 Bars)

O) WATER

PH value, Sulphate, Chloried Contain

P) Ply Wood

Determination of Resistance to dry heat, Determination of Moisture Content, Determination of Density, Thickness of Plywood.

Test for Glue Adhesion

Q) Aluminium Section

Thickness, Mass Per Running meter,

R) PVC Pipe(Non Plastisides)

Weight per running meter, Diameter of pipe & wall thickness of pipe

Supplying and erecting HMS PVC conduit FRLS grade 20 mm dia. with PVC accessories on wall / ceiling as per specification No: WG-MA/CON.

Supplying and erecting HMS PVC conduit FRLS grade 25 mm dia. With PVC accessories on wall /ceiling as per specification No: WG-MA/CON.

Supplying and erecting HMS PVC conduit FRLS grade 25 mm dia. With necessary accessories in wall/floor with chiselling appropriately as per specification No: WG-MA/CC.

Supplying and erecting HMS PVC conduit FRLS grade 32 mm dia. With PVC accessories on wall / ceiling as per specification No: WG-MA/CON.

Supplying and erecting 20mm dia. corrugated flexible polypropylene conduit

Supplying and erecting 25 mm dia. corrugated flexible polypropylene conduit

Supplying and erecting UPVC reinforced flexible conduit 31/32 mm in dia. conforming to I.S. and approved make with required number of couplings, PVC bushes, check nuts etc. complete. (Note-1)

Supplying and erecting PVC trunking (PVC casing-n-capping) of size 25 mm with accessories on wall/ceiling as per specification No: WG-MA/CON.

Supplying and erecting mains with 3x1.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit /trunking /inside pole/Bus bars or any other places as per specification No: WG-MA/BW

Supplying and erecting mains with 3x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit /trunking /inside pole /Bus bars or any other places. as per specification No: WG-MA/BW

Supplying and erecting mains with 3x4 sq.mm FRLSH copper PVC insulated wire laid in provided conduit /trunking /inside pole /Bus bars or any other places. as per specification No: WG-MA/BW

Supplying and erecting mains with 3x6 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW

Concealing of provided M.S./ PVC switch box in wall with finishing as per specification No: WG-PW/CW

Supplying and erecting 8 module independent computer board comprising of ISI mark modular type 3 pin 6A multi sockets with safety shutter, duly erected on provided plate and box with wiring connections complete wirh ISI mark modular type switch 16 / 20 A with indicator, duly erected on provided plate and box with wiring connections complete with all eracting on PVC Surface modular switch box with double mounting plate for 8 modules duly erected.Supplying and erecting modular type blanking plate one module [ RA : Mod. Socket 6 A x02 nos. + Mod. switch 20 A-01 no. + Mod. Switch box 8 M - 01 no. Mod.Blank Plate 01 nos]

Supplying and erecting 6 module independent Printer board comprising of ISI mark modular type 3 pin 6A multi sockets with safety shutter, duly erected on provided plate and box with wiring connections complete wirh ISI mark modular type switch 16 / 20 A with indicator, duly erected on provided plate and box with wiring connections complete with all eracting on PVC Surface modular switch box with double mounting plate for 6 modules duly erected.Supplying and erecting modular type blanking plate one module [ RA : Mod. Socket 6 A -02 nos. + Mod. switch 20 A-01 no.+ Mod. Switch box 6 M - 01 no+ Mod.Blank Plate -01 nos.]

Supplying and erecting 3 module independent board comprising of ISI mark modular type 3 pin 16 A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete. with indicator, duly erected on provided plate and box with PVC Surface modular switch box with double mounting plate for 2 modules duly erected. Supplying and erecting modular type switch 16A/20A With Indicator. [ RA : Mod.16A Socket -01 nos. +Mod. switch 20 A-01 no. + Mod.3 module Box A -01 no.]

Supplying and erecting 3 module independent computer board comprising of ISI mark modular type 3 pin 6A multi sockets with safety shutter, duly erected on provided plate and box with wiring connections complete with ISI mark modular type switch 6A / 10A duly erected on provided plate and box with wiring connections complete. [ RA : Mod. Socket 6 A -01 nos. + Mod. switch 6 A(1-6-1) -01 no.+ Mod. Switch box 3 - 01 no. ]

Supplying and erecting modular type (two module) electronic step regulator for fan, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting Ceiling rose / Batten holder / Slanting holder / hanging cord switch / hanging bell push / pendant holder bakelite base 6A. erected on filled polypropylene board or polished double wooden block/ PVC junction box.

Supplying and erecting modular type 3 pin 6A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete

Supplying and erecting modular type 3 pin 6 / 16A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting modular type switch 6A / 10A duly erected on provided plate and box with wiring connections complete.

Supplying and erecting modular type switch 16A duly erected on provided plate and box with wiring connections complete.

Supplying and erecting PVC Surface modular switch box with double mounting plate for 1 module complete duly erected.

Supplying and erecting PVC Surface modular switch box with double mounting plate for 2 module duly erected.

Supplying and erecting PVC Surface modular switch box with double mounting plate for 3 module duly erected.

Supplying and erecting PVC Surface modular switch box with double mounting plate for 4 module duly erected.

Supplying and erecting PVC Surface modular switch box with double mounting plate for 6 module duly erected.

Supplying and erecting PVC Surface modular switch box with double mounting & front plate for 8 module complete duly connected.

Supplying and erecting PVC Surface modular switch box with double mounting plate for 12 module duly erected.

Supplying and erecting PVC Surface modular switch box with double mounting plate for 16 / 18 module duly erected.

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 1 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 2 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 3 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 4 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 6 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 8 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 12 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 16 / 18 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.

Supplying and drawing of 2x1.5 sq.mm. FRLSH grade copper wires with 1.5 sq.mm earth wire in provided concealed pipes for concealed type light/bell point wiring and terminating on modular accessories in box for point wiring for light/fan/bell as per specification No: WG-PW/CW

Supplying and drawing of 2x1.5 sq.mm. FRLSH grade copper wires with 1.5 sq.mm earth wire in provided concealed pipes for concealed type fan point wiring and terminating on modular accessories in box as per specification No: WG-PW/CW

Supplying and drawing of 2x1.5 sq.mm. FRLSH grade copper wires with 1.5 sq.mm earth wire in provided concealed pipes and terminating on modular accessories in box for point wiring for independent plug as per specification No WG-PW/SW

Point wiring for light/bell/exhaust fan in 20 mm FRLS grade HMS PVC conduit with 1.5 sq.mm (2+1E) FRLSH grade copper wire, modular type switch, earthing and required accessories as per specification No: WGPW/SW.

Point wiring for light/bell hybrid type (Surface type under false ceiling and concealed type for drops & switch boards on walls) in min 20 mm PVC conduit / casing n capping with 1.5 sq.mm. (2+1E) FRLSH grade copper wires, modular type switch, earthing and required accessories as per specification No: WGPW/HW

extra length for point wiring for light/bell hybrid type (Surface type under false ceiling and concealed type for drops & switch boards on walls) in min 20 mm PVC conduit / casing n capping with 1.5 sq.mm. (2+1E) FRLSH grade copper wires, modular type switch, earthing and required accessories as per specification No: WGPW/HW

Point wiring for ceiling fan (Surface type under false ceiling and concealed type for drops & switch boards on walls) in min 20 mm PVC conduit / casing n capping with 1.5 sq.mm. (2+1E) FRLSH grade copper wires, modular type switch, earthing and required accessories as per specification No: WG-PW/HW

Supplying and erecting modular type buzzer 220 / 250V, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting Electronic type cordless call bell erected on T.W. board having portable bell push working on 9V D.C. battery and (effective range upto 45 meter) bell on 250 V A.C. supply.

Supplying and erecting modular type bell indicator, duly erected on provided plate and box with wiring connections complete.

Supplying & fixing anchor type fastener fan hook, with 2 nos. of 10 mm dia x 75 mm long with necessary materials for ceiling fan.

Supplying and erecting fan hook box of 10 mm M.S. round bar bounded to the R.C.C. bars upto 50 mm length each side and pierced through a 16 S.W.G. thick aluminium/M.S. Bowl 100 mm dia. or equivalent square size and having depth upto 75 mm complete erected with duly painted by one coat of red oxide paint and two coats of paint erected in position and without any leakage of slurry of cement concrete on either side of the box and positioned to the bottom level of the slab.

Supplying and erecting ‘B’ class G.I .pipe / M.S. pipe down rod duly painted for fan complete erected with PVC three core flexible cable 1 sq. mm copper PVC wire.

Supplying and erecting fresh air cum exhaust fan of light duty 250 V A.C. 50 cycles 225mm. 1400 RPM rust proof body & blades, wire mesh, duly erected, complete.

Supplying & erecting 20 SWG G.I sheet metal cawl rectangular / round shaped with 25 x 25x 3 (mm) angle iron frame, metal mesh to avoid birds entry with necessary material, suitable for exhaust fan of 300 mm as per specification no FG-FAS/MSC

Supplying and erecting energy saving ceiling fan 230 V A.C. 50 cycles 1200 mm complete erected in position as per specification no. FG-FN/CF

Supplying and erecting blanking plate of suitable size on MCBDB.

Outdoor Type wheather proof IP 66 4P MCB Box

Providing & erecting hot dipped galvanised ladder type cable tray manufactured from 16 SWG (1.6 mm thick) GI sheet of 300 mm width & 100 mm height comprising all required standard accessories.

Providing & erecting hot dipped galvanised ladder type cable tray manufactured from 16 SWG (1.6 mm thick) GI sheet of 500 mm width & 100 mm height comprising all required standard accessories.

Providing & erecting hot dipped galvanised cover suitable for perforated type Cable tray manufactured from 18 SWG (1.2 mm thick) GI sheet of 150 mm width & 20 mm height complete with necessary hardware..

Providing & erecting hot dipped galvanised ladder type cable tray manufactured from 16 SWG (1.6 mm thick) GI sheet of 500 mm width & 75 mm height complete with necessary coupler plates & hardware.

Supplying, installation and testing of maintenance free earthing comprising of Electrode of 17.2 mm diameter Low Carbon Steel with 250 micron molecular copper bonded earthing rod of Length 3m along with 25 kg Carbon based environment friendly back fill ground enhancing compound required to fill up the excavated earth with required quantity complete, and recording the results Specification no. EA-MOBI

Providing pipe type earthing with 40mm. dia. G.I. pipe or 20 mm dia. G.I. Rod complete with all materials testing and recording the results as per specification no. EA-EP

Providing earthing with copper earth plate size 60 x 60 x 0.315 cm with funnel with a wire mesh for watering and brick masonry block C.l. cover with minimum 25 kg Carbon based environment friendly back fill Ground Enhancing compound complete with all materials, testing & recording the results as per specification no ESE -LA

Making trench in Hard murum/Tar road having 0.75 m depth and minimum 0.3mtr width as per IS for laying provided cables up to voltage level 1.1Kv cable complete as per specification No. CW-EXN-CTR

Supplying, installing, testing and commissioning FR, XLPE armoured cable 4 core 1.5 sq.mm. copper conductor complete erected on wall/ ceiling complete as per specification no. CB-LT/CU

Supplying and erecting PVC insulated PVC round sheathed 4 sq.mm (56 no. x 0.30 mm dia.) 3 core flexible multi stranded copper Industrial cable for voltage grade up to 1.1 kV

Supplying and erecting PVC insulated PVC round sheathed 2.5 sq.mm (50 no. x 0.25 mm dia.) 3 core flexible multi stranded copper Industrial cable for voltage grade up to 1.1 kV

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 16 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 25 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 50 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 70 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 95 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 150 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 185 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 240 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating XLPE insulated unarmoured cable 1100 V. 1 core 25 sq. mm. copper conductor complete erected with provided lugs, laid in provided control panel /distribution boards / pipe as per specification no. CBLT/CU

Supplying, erecting & terminating XLPE insulated unarmoured cable 1100 V. 1 core 95 sq. mm. copper conductor complete erected with provided lugs, laid in provided control panel /distribution boards / pipe as per specification no. CBLT/CU

Supplying and erecting GI strip of high purity required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint with joints required. As per specification no EA-EP.

Supplying and erecting copper strip of high purity required size used for earthing on wall and/or any other purpose with necessary copper clamps fixed on wall painted with bituminous paint with joints required. As per specification no. EAEP.

Supplying and erecting GI wire of high purity of required sizes used for earthing or any other purposes on wall with necessary G. I. Clamps fixed on wall/cable/ conduit with screws complete.

Supplying and erecting annealed bare copper wire of high purity of required sizes used for earthing on wall with necessary copper clamps fixed on wall/cable/conduit with screws complete.

Supplying and erecting anodized aluminium corridor / passage light LED fitting (4 feet) Max. 22W with high transitivity diffuser with system lumens output of Min.2200 lumens , min. efficacy of 100 lumen/W, CRI>80, CCT upto 6000K, Beam Angle of 110 deg., Ripple<5%, THD<10%, p.f. >0.95, operating range of 200-270V, surge protection of 2 kV, Life class of 50,000 Hrs. at L70B50, including driver, with end caps on provided PVC Block / wooden board with 3 years warranty.

Supplying and erecting LED square / circular Max. 11 W down lighter/Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 1200 Lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty.

Supplying and erecting LED square / circular Max. 14 W down lighter/Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 1500 Lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty.

Supplying and erecting LED square / circular Max. 18 W down lighter/ Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 2000 Lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty.

Supplying and erecting LED circular 24-28 W downlighter with Dali Dimable balast diming from 0% to 100% and 90deg 4000- 2800K,90-300V having pressure die-cast aluminimum housing with white front frame with opal translucent cover with provision for spring loaded mounting clips complete.

Supplying and erecting LED circular 14-20 W downlighter with Dali Dimable balast diming from 0% to 100% and 90deg 4000- 2800K, 90-300V having pressure die-cast aluminimum housing with white front frame with opal translucent cover with provision for spring loaded mounting clips complete.

Supplying and erecting single/double sided LED Signage board coloured in green/red with built in battery backup minimum 2hrs.Complete.Exit Sinage

Supplying LED concealed type foot / step light with aluminium body for indoor/outdoor application suitable for 4W-6W LED including driver and erecting by making necessary arrangement / recess in wall to make it flush with surface with 1 year warranty.

Wiring for plug on board with Switch socket surface /concealed type, copper wiring and earthing and with modular accessories as per specification No: WG PW/CW

Supplying & erecting CRCA sheet metal enclosures of 1.2mm thickness with 20A, 2 pin plug & earth socket and 20A, 3 pin plug top with 20A/30A single pole MCB having rated short - circuit breaking capacity (Icn) 10kA complete erected on angle iron/ GI frame.

Supplying and erecting CRCA powder coated corridor / passage light LED fitting (4 feet) Max. 17W with high transitivity diffuser with system lumens output of Min. 2000 lumens , min. efficacy of 120 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., Ripple<5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 4 kV, Life class of 50,000 Hrs. at L70B50, including driver, with end caps on provided PVC Block / wooden board with 3 years warranty.

Supplying and erecting LED Panel Light(600mm X 600mm) Max. 35 W having CRCA powder coated housing, polystyrene diffuser having system lumens output of Min 4200 Lumens, min. efficacy of 120 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50 including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty.

Supplying and erecting LED square / circular Max. 25 W down lighter/ Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 2750 Lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warrant

Providing and erecting clamps for box type / industrial type fittings with provided suspension down rod of 20 mm dia. H.G. conduit, the clamp shall be made of 25 x 3 (mm) MS flat with cutting, bending, drilling erected properly with necessary nut bolt as per direction.

Supplying and erecting double suspension pipe rod of 16 gauge 20mm.dia H.G. conduit duly threaded and painted with two coats of enamel paint for erection of fluo. tube light fitting with necessary check nuts and shielded copper flexible wire three core of 1 sq mm for connecting leads (for measurements half of the actual length both pipes used)

Supplying and erecting anodized aluminium corridor / passage / mirror light LED fitting (2 feet) Max. 12W with high transitivity diffuser with min. system lumens output of 1200 lumens, min. efficacy of 100 lumen/W, CRI>80, CCT upto 6000K, Beam Angle of 110 deg., Ripple<5%, THD<10%, p.f. >0.95, operating range of 200-270V, surge protection of 2 kV, Life class of 50,000 Hrs. at L70B50, including driver with end caps on provided PVC Block / wooden board with 3 years warranty.

Supplying & erecting inverter LED batten 20W tube light fitting with polycarbonate housing, heat sink, integrated HF electronic driver, Min. 2600 mAh Lithium ion Battery with charging time of 8-10 Hours and backup time of Min. 3 hrs. with minimum 25% of initial Watts having luminous efficacy of 100 lumen/watt, CRI>80, CCT of 6500K and THD<=20% having useful life of minimum 25000 hrs. with overheating protection with 2 years warranty.

Supplying and erecting integrated LED Bollard Cylindrical /Cubical shaped 800mm 8W IP65 & IK10 class having extrusion aluminium housing with polycarbonate diffuser, having system lumens output of Min. 800 Lumens, min. efficacy of 100 lumen/W, CRI>80, CCT upto 6500K, THD<10%, p.f. >0.90, operating range of 140-240V, inbuilt surge protection of 2 kV, Life class of 25,000 Hrs. at L50B50, including driver complete with 2 Year warranty as per specification No FG-ODF/FLS2.

Supplying & erecting integral post top lantern fixtures (mushroom type) suitable for LED lamp upto 12 W consisting of clear acrylic top cover, cast aluminium pole cap complete with accessories on provided pole /bracket as per specification no. FG-ODF/PTL

Supplying and erecting integrated LED flood light fitting Max. 155W IP65 & IK07 class having pressure die-cast aluminium housing, having system lumens output of Min. 18600 Lumens, min. efficacy of 120 lumen/W, CRI>70, CCT upto 6500K, THD<10%, p.f. >0.90, operating range of 140-270V, inbuilt surgeprotection of 4 kV, Life class of 50,000 Hrs. at L70B50, including driver with U shaped bracket with 3 Years warranty as per specification No FG-ODF/FLS2.

Supplying and erecting integrated LED Highbay Fitting 100W IP65 & IK08 class having die cast aluminium housing with polycarbonate diffuser with integrated optics, having system lumens output of Min. 15000 Lumens, min. efficacy of 145 lumen/W, CRI>70, CCT upto 6500K, THD<10%, p.f. >0.90, operating range of 140-240V, inbuilt surge protection of 4 kV, Life class of 50,000 Hrs. at L50B50 , including driver complete with 3 Year warranty as per specification No FG-ODF/FLS2.

Supplying and erecting bulk head LED fitting max. 10W with high transitivity diffuser with system lumens output of min. 1100 lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., THD<10%, p.f. >0.95, operating range of 140-260V, in built surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, IP66, IK09 rated on provided PVC Block / wooden board with 3 years warranty.

Providing & erecting 6 m high (clear height) galvanised octagonal pole with foundation bolts having bottom of 130 mm A/F, top 70 mm A/F on provided foundation as per specification no. OH-PL/OPL

Supplying and erecting street light Wall bracket made from 40 mm. dia ‘ G.I. pipe 1.2 m. in total length complete as per specification no. FG-BKT/WB

Providing and erecting galvanised 1000mm single arm sword type bracket with FRP dome and ball as per specification no. OH-PL/PBKT

Supplying and erecting integrated LED street light fitting 60W IP65 & IK08 class having single piece pressure die-cast aluminium housing, having system lumens output of Min. 6600 Lumens, min. efficacy of 110 lumen/W, CRI>70, CCT upto 6500K, THD<10%, p.f. >0.95, operating range of 140-270V, inbuilt surge protection of 10 kV, Life class of 50,000 Hrs. at L70B50, including driver complete with 3 Years warranty as per specification No FG-ODF/FLS2.

Supplying & erecting water tight terminal box of cast iron of size 300 x 200 x 150 mm complete on pole as per specification No. CB-SB

Making M- 20 grade reinforced cement concrete foundation by considering the safe soil bearing capacity at site as 10 T/sq.m at 1.5 m depth including supply of steel, concrete, excavation and fixing provided nut bolts with the help of template, duly plastered as per design complete (for 6m to 8m high octagonal /conical GI pole).

Excavating soft murum / soft soil road by chiselling for preparing pit for poles stay or earth plates or for laying cables, pipes & clearing the site by removing debris & making the site good complete.

Providing and making second class Burnt Brick masonry with conventional /I.S. type bricks in cement mortar 1:6 in foundation sand plinth of inner walls /in plinth external walls including bailing out water manually, striking joints on unexposed faces, raking out joints on exposed faces and watering etc. Complete.

Supplying & erecting conventional spike type air termination suitable to carry lightning stroke made up of heavy gauge 40 mm dia copper pipe of standard length with 5 Nos. copper spikes fixed on copper ball as air terminals duly threaded in copper pipe erected on provided foundation complete.

Carrying out core cutting of size 3" to 5" dia x 15" length in the C.C./rock/stone wall with the help of specialized core cutting machine in proper manner and finishing the site as original.

Supplying & erecting of Wall Mount 20/32A industrial Socket with standard mouting accessories as completed

Supplying, erecting ,Testing & commissioning Ceiling or wall Mounting type 250A Capacity at 40oC ambient temperature Air Insulated type Bus Trunking Aluminium Conductor having purity not less than 99.6% with Tin plated at joints suitable for (3L+N) 415V, 50 Hz A.C Supply with 100% Neutral+ enclosure as integral earth (PE) with IP 54 Protection, 25KA short circuit rating for 0.1sec, Insulation Class F (155 C), casing made of Galvanized/powder coated steel sheet enclosure having Mechanical strength certification up to IK10 with required shade of paint & having cross sectional area not more than 0.0150 Sq m, complete assembly must comply to seismic zone 4, with necessary accessories Like suspension bracket, wall bracket holder/ fixing accessories with , outlet cover , plug in hole as per site requirement with Horizontal / Vertical G.I. Support at required interval, External Single Run 25x10mm Aluminium earthing strip or Internal Integral Earth confirming to IEC 61439-6 as per specification

Supplying, installing, testing & commissioning of Tap off box with interlock arrangement on existing Air Insulated / Sandwich type bus trunking/ rising mains for 32A to 125A 3 phase 4 wire 415V, 50Hz AC Supply made with High Grade Plastic enclosure with provision of MCB/ MCCB without (MCB/MCCB) complete as required confirming to IEC 61439-6 as per specification.

Supplying, installing, testing & commissioning of Tap off box with interlock arrangement on existing Air Insulated / Sandwich type bus trunking/ rising mains for 125A to 200A 3 phase 4 wire 415V, 50Hz AC Supply made with 1.5 mm thick sheet metal enclosure (IP54/55) duly powder coated with provision of MCCB( without MCCB) complete as required confirming to IEC 61439-6 as per specification

Supplying, installation, testing and commissioning of Flange end as per design requirement & site condition suitable for Aluminium 250A, 3 phase 4 wire 415V, 50 Hz A.C ,25kA short circuit rating for 0.1 sec for Air Insulated type BBT. With necessary accessories complete confirming to IEC 61439-6 as per specification

Supplying, installing & Commissioning Vertical or Horizontal 90 Degree/Tee Elbow for Air Insulated type bus trunking/ rising mains of capacity 250A, 3 Phase 4 Wire 415 V, 50 Hz AC Supply,,25kA short circuit rating for 1 sec Made Galvanised sheet metal enclosure (IP54) duly powder coated with all necessary accessories complete confirming to IEC 61439-6 as per specification.

Supplying, erecting, testing and commissioning of 3kVA capacity online pure sine wave with backup time of 30 min. PWM & IGBT based UPS with 0.8 to unity output pf, single phase input & 1 phase output complete with all protections as per specification no. AP-UPS

Supplying, erecting, testing and commissioning of single phase input & 1 phase output 1 kVA capacity online pure sine wave UPS, with backup time of ....... hrs. PWM & IGBT based, with 0.8 to unity output pf complete with all protections as per specification no. AP-UPS

Supplying and erecting 12 V/65Ah SMF battery with battery terminal wire, duly charged complete with 24 months warranty complete

Supplying and erecting 12V/42Ah SMF battery with battery terminal wire, duly charged with 24 months warranty complete

Supplying, installing, testing and commissioning air circuit breaker manual drawout type, 650V, 1600A rated at 50º C without deration, 12kV Impulse, 4 pole (100% Neutral Protection) 50 kA, (Ics=Icu=Icw for 1s),with standard accessories with ready to close, individual fault trip, alarm and trip indication, mechanical and electrical anti pumping, soft/hard rating plug (including hard rating plug CT) with Micro-processer based LCD display release with LSIG and temperature rise protection & with 4 C/O contacts for On-Off-Trip indication, min. 5 event and trip history on breaker display on provided iron frame as per specification no. SW-SWR/ACB (Total - 1 Nos.)Supplying, installation & marking of surge arrestor/ surge protection device at the main distribution board after the incoming breaker of type 1+2 tested for Imax 50 kA for three phase and neutral with compliance to IEC 61643-11 as per specification no. CP-SPD ( Total - 1 Nos.)Supplying, installing, testing and commissioning air circuit breaker manual drawout type, 650V, 1250A rated at 50º C without deration, 12kV Impulse, 4 pole (100% Neutral Protection) 50 kA (Ics=Icu=Icw for 1s),with standard accessories with ready to close, individual fault trip, alarm and trip indications, mechanical and electrical anti pumping, soft/hard rating plug (including hard rating plug CT) with Micro-processer based LCD display release with LSIG and temperature rise protection & with 4 C/O contacts for On-Off-Trip indication, min. 5 event and trip history on breaker display on provided iron frame as per specification no. SW-SWR/ACB ( Total - 1 Nos.) Providing & erecting 4 Pole MCCB 415V, 630A, rated short-circuit breaking capacity 36 kA (Ics=100% of Icu), adjustable thermal (overload) setting and adjustable magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact and MCCB should have phase barriers both sides, with insulation withstand capacity 800V, no line-load bias in provided enclosure/panel as per specification no. SW-SWR/MCCB ( Total - 6 Nos.)Providing & erecting 4 Pole MCCB 415V, 400A, rated short-circuit breaking capacity 36 kA (Ics=100% of Icu), adjustable thermal (overload) setting and adjustable magnetic setting with provided leads, provision for installation of shunt/ UV/ trip alarm contact and MCCB should have phase barriers both sides, with insulation withstand capacity 800V, no line-load bias in provided enclosure /panel as per specification no. SW-SWR/MCCB ( Total - 2 Nos.)Providing & erecting 3 Pole MCCB, 415V, 200A, rated short-circuit breaking capacity 25 kA (Ics=100% of Icu), adjustable thermal (overload) setting and adjustable magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact and MCCB should have phase barriers both sides, with insulation withstand capacity 800V, no line-load bias in provided enclosure/panel as per specification no. SW-SWR/MCCB ( Total - 4 Nos.)Supplying, erecting & marking SPMCB 0.5A to 5A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB for Lamp Indication.Supplying and erecting of any size electrolyte aluminium patti or bar in bus bar chamber / in panel or any other purpose, 500 V with require capacity 99.9% aluminium purity with E91E Grade as per IS 5082 & Current Density 0.8 A per sq. mm. with fixing arrangement (like lug or bottle type lug) to both the end with high grade polyolefin insulation sleeve complete as per specification no. BCP BB Supplying and erecting metal work in CRCA sheet including Iron work for supports with fabrication of boxes, panel boards, etc. including cutting, bending, drilling, welding, riveting, treated with anti-rust treatment and duly powder coated or painted with one coat of red lead paint and 2 coats of enamel paint complete.Supplying and erecting iron work, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority. Note: Quantity of Iron/sheet metal work shall be considered and worked out as per steel data table.Supplying and erecting Three phase smart energy meter DLMS compliance with 3x240V 50 cycles AC supply 10-60 A, ISI mark, accuracy class 1.0 with backlit LCD display, measuring & display V, I, kW, kWh, PF, kVA, kVAr, MD, day, week, month & with communication module configurable for GSM/Wi-Fi, IrDA/Bluetooth, complete provided panel with calibration certificate from manufacturer & duly wired with required size of PVC wires.. ( Total - 1 Nos.)Supplying and erecting LT current transformer with bar primary 50/5 to 1000/5 ratio with 15 VA burden erected in provided CRCA box duly secured with insulating materials connected to the meter with test certificates ( Total - 3 Nos.)Supplying & erecting LED type indicating pilot lamp with LED colour blue, 230 / 250 V on provided box / panel with necessary material, wiring & connections etc. For On/Off /Trip. ( Total - 39 Nos.)Supplying & erecting LED type indicating pilot lamp with LED colours red / yellow / green, 230 / 250V on provided box / panel with necessary material, wiring & connections etc. ( Total - 3 Nos.)Supplying and erecting mains with 2x10 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW Supplying and erecting GI sheet 1.6 mm (16 SWG) caution board of size 200 x 150 mm duly painted with red oxide and enamel paint in Marathi, Hindi and English erected at position for medium voltage (415 Volt) installation with compliance to IS 2551-1982

Supplying, installing, testing and commissioning air circuit breaker manual drawout type, 650V, 1250A rated at 50º C without deration, 12kV Impulse, 4 pole (100% Neutral Protection) 50 kA (Ics=Icu=Icw for 1s),with standard accessories with ready to close, individual fault trip, alarm and trip indications, mechanical and electrical anti pumping, soft/hard rating plug (including hard rating plug CT) with Micro-processer based LCD display release with LSIG and temperature rise protection & with 4 C/O contacts for On-Off-Trip indication, min. 5 event and trip history on breaker display on provided iron frame as per specification no. SW-SWR/ACB ( Total - 1 Nos.)Supplying, installation & marking of surge arrestor/ surge protection device at the main distribution board after the incoming breaker of type 1+2 tested for Imax 50 kA for three phase and neutral with compliance to IEC 61643-11 as per specification no. CP-SPD ( Total - 1 Nos.) Providing & erecting 4 Pole MCCB 415V, 400A, rated short-circuit breaking capacity 36 kA (Ics=100% of Icu), adjustable thermal (overload) setting and adjustable magnetic setting with provided leads, provision for installation of shunt/ UV/ trip alarm contact and MCCB should have phase barriers both sides, with insulation withstand capacity 800V, no line-load bias in provided enclosure /panel as per specification no. SW-SWR/MCCB ( Total - 4 Nos.)Providing & erecting 3 Pole MCCB, 415V, 200A, rated short-circuit breaking capacity 25 kA (Ics=100% of Icu), adjustable thermal (overload) setting and adjustable magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact and MCCB should have phase barriers both sides, with insulation withstand capacity 800V, no line-load bias in provided enclosure/panel as per specification no. SW-SWR/MCCB ( Total - 2 Nos.)Providing & erecting 3 Pole MCCB, 415 V, 100A, rated short-circuit breaking capacity 25 kA (Ics=100% of Icu), adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact. MCCB with phase barriers on both sides, insulation withstand capacity 800V, no line-load bias in provided enclosure/panel as per specification no. SW-SWR/MCCB ( Total - 5 Nos.)Supplying, erecting & marking SPMCB 0.5A to 5A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB for Lamp Indication.Supplying and erecting of any size electrolyte aluminium patti or bar in bus bar chamber / in panel or any other purpose, 500 V with require capacity 99.9% aluminium purity with E91E Grade as per IS 5082 & Current Density 0.8 A per sq. mm. with fixing arrangement (like lug or bottle type lug) to both the end with high grade polyolefin insulation sleeve complete as per specification no. BCP BB Supplying and erecting metal work in CRCA sheet including Iron work for supports with fabrication of boxes, panel boards, etc. including cutting, bending, drilling, welding, riveting, treated with anti-rust treatment and duly powder coated or painted with one coat of red lead paint and 2 coats of enamel paint complete.Supplying and erecting iron work, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority. Note: Quantity of Iron/sheet metal work shall be considered and worked out as per steel data table.Supplying and erecting Three phase smart energy meter DLMS compliance with 3x240V 50 cycles AC supply 10-60 A, ISI mark, accuracy class 1.0 with backlit LCD display, measuring & display V, I, kW, kWh, PF, kVA, kVAr, MD, day, week, month & with communication module configurable for GSM/Wi-Fi, IrDA/Bluetooth, complete provided panel with calibration certificate from manufacturer & duly wired with required size of PVC wires. ( Total - 14 Nos.)Supplying and erecting LT current transformer with bar primary 50/5 to 1000/5 ratio with 15 VA burden erected in provided CRCA box duly secured with insulating materials connected to the meter with test certificates. ( Total - 14 Nos.)Supplying & erecting LED type indicating pilot lamp with LED colour blue, 230 / 250 V on provided box / panel with necessary material, wiring & connections etc. For On/Off /Trip. ( Total - 45 Nos.) Supplying & erecting LED type indicating pilot lamp with LED colours red / yellow / green, 230 / 250V on provided box / panel with necessary material, wiring & connections etc. ( Total - 6 Nos.)Supplying and erecting mains with 2x10 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BWSupplying and erecting GI sheet 1.6 mm (16 SWG) caution board of size 200 x 150 mm duly painted with red oxide and enamel paint in Marathi, Hindi and English erected at position for medium voltage (415 Volt) installation with compliance to IS 2551-1982

Suppy installation testing commisioning of 1250A Auto transfer switch ATS in Emergency panel.

MDB Auditorium Providing & erecting 4 Pole MCCB, 415V, 200A, rated short-circuit breaking capacity 25 kA (Ics=100% of Icu), adjustable thermal (overload) setting and adjustable magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact and MCCB should have phase barriers both sides, with insulation withstand capacity 800V, no line-load bias in provided enclosure/ panel as per specification no. SW-SWR/MCCB ( Total - 1 Nos.) Supplying, erecting & marking FPMCB 40A to 63A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB ( Total - 9 Nos.) Supplying, erecting & marking SPMCB 0.5A to 5A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB for Lamp Indication.Supplying and erecting metal work in CRCA sheet including Iron work for supports with fabrication of boxes, panel boards, etc. including cutting, bending, drilling, welding, riveting, treated with anti-rust treatment and duly powder coated or painted with one coat of red lead paint and 2 coats of enamel paint complete.Supplying and erecting iron work, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority. Note: Quantity of Iron/sheet metal work shall be considered and worked out as per steel data table.Supplying and erecting Three phase smart energy meter DLMS compliance with 3x240V 50 cycles AC supply 10-60 A, ISI mark, accuracy class 1.0 with backlit LCD display, measuring & display V, I, kW, kWh, PF, kVA, kVAr, MD, day, week, month & with communication module configurable for GSM/Wi-Fi, IrDA/Bluetooth, complete provided panel with calibration certificate from manufacturer & duly wired with required size of PVC wires.. ( Total - 1 Nos.) Supplying and erecting LT current transformer with bar primary 50/5 to 1000/5 ratio with 15 VA burden erected in provided CRCA box duly secured with insulating materials connected to the meter with test certificates ( Total - 4 Nos.) Supplying & erecting LED type indicating pilot lamp with LED colour blue, 230 / 250 V on provided box / panel with necessary material, wiring & connections etc. For On/Off /Trip. ( Total - 21 Nos.) Supplying & erecting LED type indicating pilot lamp with LED colours red / yellow / green, 230 / 250V on provided box / panel with necessary material, wiring & connections etc. ( Total - 3 Nos.) Supplying and erecting mains with 2x10 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW Supplying and erecting GI sheet 1.6 mm (16 SWG) caution board of size 200 x 150 mm duly painted with red oxide and enamel paint in Marathi, Hindi and English erected at position for medium voltage (415 Volt) installation with compliance to IS 2551-1982

Supplying and erecting 250 kVAr, 3 phase, 50 Hz., Power contactors Derated for microprocessor APFC controller with MPP / APP type capacitor with 525 V and having minimum overcurrent capacity of 1.8 In, peak inrush current capacity 300 In and minimum life 150000 hours with , consisting of suitable steps of MPP / APP type capacitor units with detuned aluminium filter 7% reactors with circuit breaker as main incomer and MCCB for each branch protection, as per specification no CP-ED/APFC

Supplying & erecting triple pole and neutral distribution board (TPNDB), SPMCB of 12 ways /phase (36 poles), with door, 1.2mm thickness surface/flush mounted, IP 43 Protection on iron/GI frame (horizontal busbar type) as per specification no. SW-SWR/MCBDB ( Total - 1 Nos.) Supplying, erecting & marking FPMCB 40A to 63A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB ( Total - 1 Nos.) Supplying, erecting & commissioning 2 pole RCCB 16/25A, electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification no. SW-RCCB/RCCB ( Total - 3 Nos.) Supplying, erecting & marking SPMCB 6A to 32A, B-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB ( Total - 30 Nos.)

Supplying & erecting triple pole and neutral distribution board (TPNDB), SPMCB of 12 ways /phase (36 poles), with door, 1.2mm thickness surface/flush mounted, IP 43 Protection on iron/GI frame (horizontal busbar type) as per specification no. SW-SWR/MCB ( Total - 1 Nos.) Supplying, erecting & marking FPMCB 40A to 63A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB ( Total - 1 Nos.) Supplying, erecting & commissioning 2 pole RCCB 16/25A, electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification no. SW-RCCB/RCCB ( Total - 3 Nos.) Supplying, erecting & marking SPMCB 6A to 32A, B-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB ( Total - 15 Nos.) Supplying, erecting & marking SPMCB 6A to 32A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB ( Total - 30 Nos.)

Supplying & erecting triple pole and neutral distribution board (TPNDB), SPMCB of 8 ways / phase (24 poles), with door, 1.2mm thickness surface/ flush mounted, IP 43 Protection on iron/GI frame (horizontal busbar type) as per specification no. SW-SWR/MCBDB ( Total - 1 Nos.) Supplying, erecting & marking TPMCB 40A to 63A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB ( Total - 1 Nos.) Supplying, erecting & commissioning 2 pole RCCB 40A, electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification no. SW-RCCB/RCCB ( Total - 3 Nos.) Supplying, erecting & marking SPMCB 6A to 32A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB ( Total - 18 Nos.)

12 WAY PPI TPNDB(UPSDB) Supplying & erecting triple pole and neutral distribution board (TPNDB), SPMCB of 12 ways /phase (36 poles), with door, 1.2mm thickness surface/flush mounted, IP 43 Protection on iron/GI frame (horizontal busbar type) as per specification no. SW-SWR/MCBDB ( Total - 1 Nos.) Supplying, erecting & marking FPMCB 40A to 63A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB ( Total - 1 Nos.) Supplying, erecting & commissioning 2 pole RCCB 40A, electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification no. SW-RCCB/RCCB ( Total - 3 Nos.) Supplying, erecting & marking SPMCB 6A to 32A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB ( Total - 30 Nos.)

4 WAY VTPDB (LPDB) Auditorium Supplying & erecting triple pole and neutral distribution board (TPNDB), SP/TP MCBs total 8 ways /24 poles, with door, 1.2mm thickness surface/flush mounted, IP 43 Protection on iron/GI frame (vertical busbar type) as per specification no. SW-SWR/MCBDB ( Total - 1 Nos.) Supplying, erecting & marking FPMCB 40A to 63A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB ( Total - 1 Nos.) Supplying, erecting & marking SPMCB 6A to 32A, B-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB ( Total - 6 Nos.) Supplying, erecting & marking SPMCB 6A to 32A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB ( Total - 6 Nos.)

4 WAY VTPDB Supplying & erecting triple pole and neutral distribution board (TPNDB), SP/TP MCBs total 8 ways /24 poles, with door, 1.2mm thickness surface/flush mounted, IP 43 Protection on iron/GI frame (vertical busbar type) as per specification no. SW-SWR/MCBDB ( Total - 1 Nos.)Supplying, erecting & marking FPMCB 40A to 63A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB ( Total - 1 Nos.) Supplying, erecting & marking TPMCB 40A to 63A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB ( Total - 4 Nos.)

8 WAY PPI TPNDB(At Ground Floor) Supplying & erecting triple pole and neutral distribution board (TPNDB), SPMCB of 8 ways / phase (24 poles), with door, 1.2mm thickness surface/ flush mounted, IP 43 Protection on iron/GI frame (horizontal busbar type) as per specification no. SW-SWR/MCBDB ( Total - 1 Nos.) Supplying, erecting & marking TPMCB 40A to 63A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB ( Total - 1 Nos.)Supplying, erecting & commissioning 2 pole RCCB 40A, electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification no. SW-RCCB/RCCB ( Total - 3 Nos.) Supplying, erecting & marking SPMCB 6A to 32A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB ( Total - 18 Nos.)

12 WAY VTPDB (Lift)Supplying & erecting triple pole and neutral distribution board (TPNDB), 3 pole/4 pole MCCB as incomer & outgoing SP MCB (36 poles) or TP MCB of 12 ways (36 poles), with door, 1.2mm thickness, surface/flush mounted, on iron/GI frame (vertical busbar type) as per specification no. SW-SWR/ MCBDB1 ( Total - 1 Nos.)Providing & erecting 3 Pole MCCB, 415V, 200A, rated short-circuit breaking capacity 25 kA (Ics=100% of Icu), adjustable thermal (overload) setting and adjustable magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact and MCCB should have phase barriers both sides, with insulation withstand capacity 800V, no line-load bias in provided enclosure/panel as per specification no. SW-SWR/MCCB ( Total - 1 Nos.)Supplying, erecting & marking TPMCB 40A to 63A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB ( Total - 12 Nos.)

12 WAY VTPDB (Miscellaneous)Supplying & erecting triple pole and neutral distribution board (TPNDB), 3 pole/4 pole MCCB as incomer & outgoing SP MCB (36 poles) or TP MCB of 12 ways (36 poles), with door, 1.2mm thickness, surface/flush mounted, on iron/GI frame (vertical busbar type) as per specification no. SW-SWR/ MCBDB1 ( Total - 1 Nos.) Providing & erecting 3 Pole MCCB, 415 V, 100A, rated short-circuit breaking capacity 25 kA (Ics=100% of Icu), adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact. MCCB with phase barriers on both sides, insulation withstand capacity 800V, no line-load bias in provided enclosure/panel as per specification no. SW-SWR/MCCB ( Total - 1 Nos.) Supplying, erecting & marking TPMCB 40A to 63A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB ( Total - 12 Nos.)

12 WAY PPI TPNDB(Server & Security)Supplying & erecting triple pole and neutral distribution board (TPNDB), SPMCB of 12 ways /phase (36 poles), with door, 1.2mm thickness surface/flush mounted, IP 43 Protection on iron/GI frame (horizontal busbar type) as per specification no. SW-SWR/MCBDB ( Total - 1 Nos.)Supplying, erecting & marking FPMCB 40A to 63A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB ( Total - 1 Nos.) Supplying, erecting & commissioning 2 pole RCCB 40A, electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification no. SW-RCCB/RCCB ( Total - 3 Nos.) Supplying, erecting & marking SPMCB 6A to 32A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB (Total - 30 Nos.)

8 WAY TPNDB(HVAC IDU) Supplying & erecting triple pole and neutral distribution board (TPNDB), SPMCB of 8 ways / phase (24 poles), with door, 1.2mm thickness surface/ flush mounted, IP 43 Protection on iron/GI frame (horizontal busbar type) as per specification no. SW-SWR/MCBDB ( Total - 1 Nos.) Supplying, erecting & marking FPMCB 40A to 63A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB ( Total - 1 Nos.) Supplying, erecting & commissioning 2 pole RCCB 16/25A, electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification no. SW-RCCB/RCCB ( Total - 12 Nos.)

For LiftSupplying and erecting single pole and neutral distribution board (SPNDB), with 2 ways for incoming and 10 ways (10 poles) for outgoing SP MCBs, with door, 1.2mm thickness surface / flush mounted, IP 43 Protection on iron /GI frame as per specification no. SW SWR/MCBDB

Supplying, erecting & marking SPMCB 6A to 32A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB

Supplying, erecting & marking DPMCB 6A to 32A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB

Supplying & erecting CRCA sheet metal one way enclosures of 1.2mm thickness suitable for DP MCB /TP MCB/FP MCB/RCCB/RCBO complete erected on angle iron/GI frame.

Supplying, erecting & commissioning 2 pole RCCB 16/25A, electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification no. SW-RCCB/RCCB

Providing, erecting & commissioning 4 pole RCCB 40A, with added immunity to avoid DC pulse tripping with 30/100/300 mA sensitivity complete as per specification no. SW-RCCB/RCCB

Providing, erecting & commissioning 4 pole RCCB 63A, with added immunity to avoid DC pulse tripping with 30/100/300 mA sensitivity complete as per specification no. SW-RCCB/RCCB

(DG Set )Supplying, erecting, testing and commissioning of diesel generating set with alternator of 750 kVA output continuous rating, 3 Phase, 415 V, 50c/s 0.8 p. f. A.C supply, a totally enclosed air cooled / liquid cooled multi-cylinder diesel engine developing suitable BHP at 1500 rpm with 10% overload for 1 hour in 12 hours, along with standard accessories, self-excited, self-regulated, screen protected alternator with static excitation system running at 1500 RPM as per IS 4722-2001 with voltage regulation +/- 5 %, with performance class G2 and maximum fuel consumption 126.4 Ltr/hr @75% loading. Both the engine and alternator direct coupled on a common fabricated steel base frame and mounted on anti-vibrating pads with standard control panel comprising meters, switchgears, indicators connected with suitable wires/cables, the complete set enclosed in composite acoustic enclosure as fully assembled integral unit made of 16 SWG CRCA sheet, sound absorbing material to restrict sound level up to 75 dB at 1.0 m, provided with first filling of oil, diesel not less than 990 Ltr etc. on provided M20 Grade CC Foundation and obtaining necessary approval from Electrical Inspector as per specification no. GEN-DG

Supplying, erecting, testing and commissioning of microprocessor based AMF panel suitable for diesel generating set of above 500 kVA up to 750 kVA capacity Three phase, 415 Volts, 50Hz A.C. with all standard features, safeties etc as per specification no. GEN-AMF.

Making cement concrete foundation in 1:2:4 cement concrete with foundation bolts and nuts complete. (cost of wooden box is included) (for pumps).

Supplying, installing, testing and commissioning FR, XLPE armoured cable 8 core 1.5 sq.mm. copper conductor complete erected on wall/ ceiling complete as per specification no. CB-LT/CU

Supplying, installing, testing and commissioning FR, XLPE armoured cable 12 core 1.5 sq.mm. copper conductor complete erected on wall/ ceiling complete as per specification no. CB-LT/CU

Pumps Supplying and erecting minimum Three & above star rated 3 phase, 415 V, 50 Hz, submersible pump set of 7.5 KW/10HP suitable for erection on open well, pump having delivery head from 72 to 28 m and discharge from 120 to 840 litres. per minute & pipe of Suction 65 mm/Delivery 50 mm diameter erected with necessary H type clamps as per specification No. WP-OSP

Supplying and erecting minimum Three & above star rated 1 phase, 230 V, 50 Hz, submersible pump set of 1.5 KW/2HP suitable for erection on open well, pump having delivery head from 29 to 7 m and discharge from 30 to 600 litres. . per minute & pipe of Suction 50 mm/Delivery 50 mm diameter erected with necessary H type clamps as per specification No. WP-OSP

Supplying and erecting 50 mm dia. gun metal sluice valve at position with necessary materials complete.

Supplying and erecting ISI mark GI pipe 50 mm dia.‘B’ class at position with accessories complete as per specification no. CW-PLB/GP.

Supplying & erecting automatic control panel for 3 Phase , 415 volt, A.C, Submersible/centrifugal pump set up to 7.5 HP consisting of DOL starter having relay range 9-14 AMP,S.P.P., Combined ammeter/ voltmeter, phase indicating lamp enclosed in CRCA powder coated Vibration proof enclosure with IP 54 protection. Control Panel should offer single phasing, phase reversal, phase imbalance etc .

Supplying & erecting automatic control panel for 3 Ph, 415 volt, A.C. Submersible/centrifugal pump set up to 7.5 HP - 10 H.P. consisting of DOL starter having relay range 13-21 AMP,S.P.P., Combined ammeter/voltmeter, phase indicating lamp enclosed in CRCA powder coated Vibration proof enclosure with IP 54 protection. Control Panel should offer single phasing, phase reversal, phase imbalance etc.

Supplying & erecting Float sensor switch for water level controller working on 250V & rated current 8A, with 2 mtr. wire & High quality of wire & plastic body.

Supplying & erecting Water level controller 230/415 V, A.C. , Four way under ground & Over head tank operation only.

Supplying & erecting PVC coated 5 mm dia. Brass sensor/ electrode duly wired with nuts & bolts complete (Set of 3 Nos)

Supplying & erecting flat flexible 3 core 4 sq.mm PVC sheathed submersible type copper cable suitably clamped at fixed intervals with column pipe assembly complete.

Supplying & erecting flat flexible 3 core 2.5 sq.mm PVC sheathed submersible type copper cable suitably clamped at fixed intervals with column pipe assembly complete

Supplying, erecting & marking FPMCB 40A to 63A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB

Supplying, erecting & marking FPMCB 6A to 32A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB

Supplying, fixing and commissioning MCB type change over switch 4 pole, 40A with 3 positions (I-O-II) with centre off position as per specification no. SW-SWR/MCBCOS

Supplying, fixing and commissioning MCB type change over switch 2 pole, 25 A with 3 positions (I-O-II) with centre off position as per specification no. SWSWR / MCBCOS

Supplying, erecting & marking DPMCB 6A to 32A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB

(Rooftop ON grid solar systems)Supplying, installing, testing and commissioning of 50 kWp ON-GRID Solar PV System / Plant consisting Solar PV Poly Crystalline Panel (335 Wp X 75 Nos.) and Solar ON-GRID Inverter of similar capacity (THD<3%) with interconnecting wires / cables up to solar ON GRID inverter, proper base plate, canopy box to house Inverter and necessary accessories i.e. ACDB/ DCDB , MCB etc. wiring up to solar Inverter in casing and capping, display board, sign board, two distinct earthing, lightning arrester, liaisoning charges, remote monitoring system with maintaining card / chip for 5 years including net charges for RMS System, complete up to net meter installation and export to the grid with 5 year ON-SITE warranty and fully comprehensive maintenance contract as per Specification no. ESD-RT-ONG.

Supplying and erecting AC three phase LT CT multifunction net meter DLMS compliance of accuracy class 0.5, 3 x 240V, 50Hz, with backlit LCD display, optical port & RS 232 port (measures import kWh, kVAh, export kWh, kVAh, Net kWh, kVAh, V, I, kW, 6 months history of energy, load survey, TOD, tamper detection & logging, power ON/OFF events, instantaneous parameters of rating 1/5A with display in absence of power) with wiring connections and mounting hardware on provided panels complete with calibration certificate from manufacturer.

SITC of Inground Light 12W (LI20-111-030-30-XX)

SITC of Driver Details 32W (XLG-35-24)

SITC of S Connector (C-S-4C-IP67)

SITC of T Connector (C-T-4C-IP67)

SITC of Up Down Light 28W (LW32-321-022-30-XX)

Supplying and installing cat-6 cable suitable for networking as per specification no. WG-COC/NC

Supplying and installing cat-6 armoured cable with ECCS tape suitable for networking as per specification No. WG-COC/NC

Supplying and erecting PVC Surface modular switch box with double mounting plate for 1 module complete duly erected along with 1 no of tool-less Information Outlet (Ethernet) flush type in provided modular box as per specification no.WG-NAS/IO

Supplying and erecting PVC Surface modular switch box with double mounting plate for 2 module complete duly erected along with 2 no of tool-less Information Outlet (Ethernet) flush type in provided modular box as per specification no.WG-NAS/IO

Supplying and erecting PVC Surface modular switch box with double mounting plate for 4 module complete duly erected along with 4 nos of tool-less Information Outlet (Ethernet) flush type in provided modular box as per specification no.WG-NAS/IO)

Supplying and fixing tool-less IO (Ethernet) flush/surface type in provided modular box as per specification no. WG-NAS/IO

Supplying and fixing Cat-6 24 port Patch panel with Tool-less keystone jacks in provided U Rack complele as per specification no WG-NAS/PP

Suppying and fixing 1 meter length, UTP patch cord of Cat 6 type in position as per specificationNo WG-COC/PC

Supplying and fixing 2 m UTP patch cord of cat 6 type in position as per specification No. WG-COC/PC

Supplying, Installing & Testing UTP Connector (RJ-45) as per specification No WG,NAS/UTPC

Supplying and erecting LSZH armoured multimode optical fibre cable with 6 fibres, with core dia 50/125 Lm (OM4) suitable for 1 gbps ethernet distance at 850 nm of wavelength, on wall/ceiling or laid in provided pipe/trench as per specification No. WG-COC/OFC

Supplying and fixing Rack mounted type 12 Ports, Light guide unloaded Interconnect Unit with adapter Panel for termination of Optical fibre cables on wall/ provided U Rack complete as per specification no. WG-NAS/ LIU

Supplying and fixing SC/LC type multimode duplex adapter to couple two connectors between OFC & Fibre switch/Fibre module as per specification no. WG-NAS/MMA

Supplying and plugging 3 m fibre patch cord LC-SC MM (50) OM4 LSZH duplex complete as per specification no. WG-COC/FPC

Supplying and plugging 3 m fibre patch cord LC-LC MM (50) OM4 LSZH duplex complete as per specification no. WG-COC/FPC

Supplying and fixing SC/LC type multimode pigtails (OM4) as per specification complete. WG-NAS/LIU2

Supplying & erecting Jelly filled armoured telephone cable 20 pair with 0.5 mm dia. laid in provided trench as per specification No. WGTW

Supplying & erecting Jelly filled armoured telephone cable 50 pair with 0.5 mm dia. laid in provided trench as per specification No. WGTW

Supplying & erecting Jelly filled armoured telephone cable 100 pair with 0.5 mm dia. laid in provided trench as per specification No. WGTW

Supplying & erecting Jumper wire with 0.5 mm dia as per specification No. WG-TW

Supplying, erecting & commissioning 50 pairs FR junction box with moulded plastic enclosure as per specification no. WG-TW

Supplying, erecting & commissioning MDF Box 100x100 pairs made from min. 1.5mm thick MS sheet as per specification no. WG-TW

Supplying, erecting & commissioning MDF Box 300x300 pairs made from min. 1.5mm thick MS sheet as per specification no. WG-TW

Supplying, erecting & commissioning 10 pair module for connection & disconnection of telephone cable as per specification no. WG-TW

Supplying & erecting co-axial copper cable low voltage grade tri-shielded RG6 as per specification No. WG-TW

Supplying and erecting modular type T.V. socket single outlet, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting PVC box trunking of size 100x50 mm. with accessories on wall/ceiling as per specification No: GMA/ BOX .

Supplying and erecting PVC box trunking of size 50x50 mm. with accessories on wall/ceiling as per specification No: WG-MA/BOX.

Concealing of provided G.I. pipe/H.G. screwed conduit/PVC pipe in wall/floor/false ceiling complete as per specification No:WG-PW/CW

Providing & erecting Hot dipped galvanized perforated type cable tray manufactured from 16 swg (1.6 mm thick) GI sheet of 300 mm width & 75 mm height complete with necessary coupler plates & hardware in approved manner.

Providing & erecting Hot dipped galvanized perforated type cable tray manufactured from 16 swg (1.6 mm thick) GI sheet of 200 mm width & 75 mm height complete with necessary coupler plates & hardware in approved manner.

Providing & erecting Hot dipped galvanized cover suitable for perforated type cable tray manufactured from 18 swg (1.2 mm thick) GI sheet of 300 mm width & 20 mm height complete with necessary hardware in approved manner.

Providing & erecting Hot dipped galvanized cover suitable for perforated type cable tray manufactured from 18 swg (1.2 mm thick) GI sheet of 200 mm width & 20 mm height complete with necessary hardware in approved manner.

Supplying and erecting PVC trunking (PVC casing-ncapping) of size 40 mm with accessories on wall/ceiling as per specification No: WG-MA/CON.

Supplying and fixing 42U floor mount server rack (Dimension-DxWxH – 800x600x1866 mm) as per specification No. WG-NAS/RAK

Supplying and fixing 42 U floor mount server Rack (Dimension-DxW – 800x1000 x2070mm) as per specification No. WG-NAS/RAK

Supplying and fixing 15U wall mount rack (Dimension-DxWxH – 500x600x767 mm) as per specification No. WG-NAS/RAK

Supplying and fixing 12U wall mount rack (Dimension-DxWxH – 500x600x635 mm) as per specification No. WG-NAS/RAK

Supplying and fixing 9U wall mount rack (Dimension-DxWxH – 500x600x500 mm) as per specification No. WG-NAS/RAK

Supplying, fixing, and configuring 8-ports managed gigabit, Layer-2 switch, 10/100/1000 base-T, POE smart switch plus 2 SFP erected in provided rack complete.

Supplying, fixing, and configuring 24 ports with 4 (SFP+) port, ethernet managed switch with web view/CLI, 6KV surge protection on ethernet port and console port for management in provided rack as per specification no. WG-NWC/GBS.

Supplying, fixing, and configuring 20 SFP ports + 4 Combo SFP 10/100/1000 Base-T erected in provided rack complete.

Supplying, fixing, and configuring 20 Ports+4G Combo, Managed Layer 2, POE Switch erected in provided rack complete.

Supplying, fixing, and configuring 1-port mini-GBIC SX MM fibre transceiver (up to 550m, support 3.3V power) erected in provided rack complete

Supplying and laying (including excavation of suitable width & depth up to 90 cm) 75 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete.

Supplying, installing, testing & commissioning push button telephone instrument desk top/wall mount with caller ID & Speaker unit as per specification complete.

Supplying, installing, testing & commissioning analogue type 1+1 cordless twin instrument telephone set with speaker phone and display complete

Supply, installation, testing and commissioning of 4 way splitter for TV box with all required accessories and componants to finish the job

Supply, installation, testing and commissioning of 6 way splitter for TV box with all required accessories and componants to finish the job

Supply, Installation, Testing & Commissioning of Cantileaver tray for 42U Rack

Supplying, erecting heavy duty sliding tray with Telescopic chanel made from 1.5mm thick powder coated CRCA sheet stell

Supply & Errecting 1U PVC Cable Manager suitable to install on all Sizes of Networking Rack

Supplying and installing testing & commissioning of Digital super Hybrid type EPABX system of 2 PRI + 8 Nos. Digital extensions + suitable upto 200 Nos Analogue Extensions, Expendable Up to 100 Port,s automatic divert call option, conference call facility etc with all necessory accessories components and mounting rack if required & as per specifications

(Fire Alarm System) intelligent addressable main fire alarm panel, central processing unit with the 8 loop capacity and capable of supporting upto 250 devices and detectors per loop, with on-board LCD display with min 16 lines of text, operating at 230 V 50 HZ - AC with inbuilt Battery Backup of a minimum 24 hours in normal condition and 30 min in alarm condition, suitable provision for network connectivity, interfacing with third party equipment via a MODBUS/ OPC/ L-ON interface etc. conforming to IS 15908:2021, IS 2189: 2008, EN 54 & VDS / FM/ UL 864 (10th edition) with 3 years replacement warranty FF-AFAS/CP

Supplying, installing, testing and commissioning of repeater panel with suitable battery backup of a minimum of 24 hours in normal condition and 30 min in alarm condition, 80 backlit alphanumeric LCD display with inbuilt buzzer to indicate fault/fire alarm, manual control keys for silence/mute and to reset the FACP from the repeater station. Panel size shall not more than 175 x 275 x 65 mm conforming to EN 54 or UL approved with 3 years equipment replacementwarranty FF-AFAS/RP

Supply,Installation,Testing & Commissioning of Intelligent addressable Multisensor (photo + Heat) detector with mounting base & LED, soft addressable detectors complete as required .The mutisensor detection elements shall have inbuilt microprocessor and shall be capable of taking an independent alarm decision.

Supplying, installing, testing and commissioning of addressable optical smoke detector, single/twin LED’s with 360 degree view, suitable for low voltage 15 to 32 V DC two wires supply, in-built locking mechanism to check the removal and pilferage of the detector, in built isolation mode, start up current 300µA and alarm condition current shall be maximum 6.5 mA, operating temperature 0°C to 50°C,humidity 0-95% RH, IP 41, conforming to IS 2189: 2008, 11360_1985_Reff2020EN 54 or UL Approved with 3 years equipment replacement warranty FFAFAS/SD

Supplying, installing, testing and commissioning of intelligent addressable thermal/heat detector with rate of rise cum fixed temperature thermistor complete with base as required, suitable for temperature variations from -20°C to 38°C for fixed-heat and rate-of-rise type detectors and 0°C to 66°C for high heat type detectors, in built isolation mode, suitable for offices/ceiling cable trenches/less ventilation area's etc. with 3 years equipment replacement warranty IS : 2175 - 1988 reaffirmed 2000, IS 15908:2021 standards FF-AFAS/SD.

Supplying & Erecting of addressable beam detector with emmitter and receiver with mounting base etc complete as per specification. The range of smoke detector is max 150 feet.

Supply, installation, testing and commissioning of LPG / PNG leakage detector with addressable monitor module, mouting base, LED, GI Junction box, glands, complete as per specification.

Supplying, installing, testing and commissioning remote response indicators suitable to operate on 5 - 28 V dc supply having FR Polymer ABS Housing complete as per specification no. FF-FAAS/RRI

Supplying, installing, testing and commissioning of addressable horn cum strobe sound/ hooter, output frequency 500 to 1000 Hz with dB as per Chart given in IS 15908:2021, with flashing at 1 Hz over the strobe’s entire operating voltage range EN 54, conforming to IS 2189: 2008, IS 15908:2021 standards with 3 years equipment replacement warranty FF-AFAS/SSH.

Supplying, installing, testing and commissioning of addressable manual call points ( break glass type/pull station type), made of addressable break glass plastic square in shape surface/flush mounted with "Break Glass" massage embedded on the glass, complete erected with mounting base and required accessories conforming to EN 54 or UL listed with 3 years equipment replacement warranty FF-AFAS/MCP

Supplying, installing, testing and commissioning of addressable fire isolator module complete as required. EN 54 /FM or UL Listed with 3 years equipment replacement warranty conforming to IS 5051Part 2 (Sec 1 to 3) : 1982 Reed relays FF-AFAS/ISM

Supplying, installing, testing and commissioning of addressable fire monitor module complete as required. EN 54 or UL Listed with 3 years equipment replacement warranty conforming to IS 5051Part 2 (Sec 1 to 3) : 1982 Reed relays FF-AFAS/MM

Supplying, installing, testing and commissioning of addressable fire control/relay module complete as required, with 3 years equipment replacement warranty conforming to IS 5051Part 2 (Sec 1 to 3) : 1982 reed relays, EN 54 or UL Listed FF-AFAS/CRM

Providing, supplying and fixing self Luminous Exit sign in accordance with BS 5499 as per sample approved by Client ( Fire Exits)

Supplying, installing, testing and commissioning FR, XLPE armoured cable 2 core 1.5 sq.mm. copper conductor complete erected on wall/ ceiling complete as per specification no. CB-LT/CU

Dismantling the existing cables of all types & size up to 10 sq mm.

(Public Address System)Supplying, installing, testing and commissioning of 6W Ceiling mounted speakers with plastic / metalic grill with built in 100/70v LMT, variable wattage tapping with required mounting accessories & hardware to mount in false /true ceiling.

Supplying, erecting, testing and commissioning 15 to 30 Watts sound column or ceiling mounted complete as per specification no. FF-PA/SOC

Supplying, installing, testing and commissioning 30W Horn type speaker with built in 100/70v LMT, variable wattage tapping of 10/6/3/1.5 watts with required mounting accessories & hardware to mount on wall/ceiling / pole

Supplying, installing, testing and commissioning of 19" rack mountable 480W Dual channel Power Amplifier complete with LMT, control wires and other accessories.

Supplying, installing, testing and commissioning of 19" rack mountable Dual channel Mixer Amplifier complete with LMT, control wires and other accessories.

Supply of Micropricessor based Voice Alarm System Controller & Router suitable for 32 zones having built in 240 W amplifier , Freq response 60 to 18000 Hz, distortion <1%, S/N Ratio >75 having memory capacity 16MB flash ROM, Max messages 255. Controller shall be EVAC Compliant, and as per EN-54-16, EN608-49 ( and recording the Massages given by user department in required format in minimum three langauges and store in ROM as per software required format.)

Supply,fixing,testing and commissioning of the announcement console/call station with microphone suitable for 36 zones. The unit shall be suitable for expansion of atleast 6 additional zones

Supply,fixing,testing and commissioning 19" Rack mountable music source with FM/CD/USB player complete with interconnective cables & accessories.

Supplying, installing, testing and commissioning of Volume Controller with min 5 levels of volume control for 30W/60W speakers complete with interconnective cables & all accessories.

Supplying, erecting, testing and commissioning of 2 core shielded cable complete as per specification no. FF-PA/MCC

Supply Installation Testing & Commissioning of Outdoor Application Low Light IP Hi speed Dome type PTZ camera with 2 MP Resolution, mim 6 ~ 222mm lens, Low Light Min. Illumination: Color : 0.05Lux (1/30sec, F1.5) B/W : 0Lux (IR LED on),Day/Night, Wide dynamic range 120 dB,DIS with built-in Gyro sensor, Min. IR viewable length : 350m, H.265 streaming, Auto tracking, Intelligent video analytics , vandal resistant, 360° continuous pan, -0° to +90° tilt, 256 preset, IP66 & IK10 rated Mounted on Wall/Pole as per site requirement & including all required accessories.

Supplying, Erecting Commisioning of 2Megapixel Bullet Camera with Motorised lens(1920x1080) Resolution, Sopport ROI function, Standard Video Compression Ratio, Progressive scan Cmos, Capture motion video withoutt incised margin, 2.8 ~ 12mm (4.3x) varifocal lens, Min. Illumination :Color : 0.095Lux (30IRE), B/W : 0Lux (IR LED on), Angular Field of View: H : 109.7˚ ~ 26.0˚ / V : 60.8˚ ~ 15.2˚ / D : 131.3˚ ~ 30.1˚Max 20 FPS @4M,Max. 30 Fps@2M, H.265. H.264, MJPG/ Multiple streaming, Micro SD(128GB), Memory slot, POE/ 12Vdc, IR viewable lenght 30 m, IP-66, IK-10, Hallview support, LDC support ( Lens Distortion Correction) [M/s Samsung/Sony/Pelco Make]

128ch Network Video Recorder-supptying, erectinS, testing and commissioninE of Connect Up to 128 tp Cameras, Dual OS, Up to 12Megapixels Resolution, Two independent HDMt & Two VGA outputs, Atleast one HDMt output of 4K resolution, atleast 1 VGA output with output upto 1920 t 1080, support H.265, MlpEG, supports Nll hot spare system,Supports RAlD0, RAtD1, RAtD5, RAtD6 and RAtDlO ,Supports HDD hot swap, Supports Dual power-Redundant, tncoming Eandwidth 320 Mbps, 8 SATA Hard Disks, ANR Technology, 8 SATA interfaces for 8 HDDs and capaclty of each BDO upto gTB, 3 x USB at least 1 x USB with 3.0, Atarm l/O 1614, RS-48S, RS_232, 2 Rt-4S 10/100/ 1000 Mbps self,adaptive Ethernet interface, Multiple network monitoring:Web viewer, CE, FCC, UL certified

64ch Netwo.k Video Reco.der,SupplyinS, erecting, testing and commissioning of Connect Up to 64 tp Cameras, Dual OS, Up to 12 Megapixel5 Resolution, Two independent HDMt & Two VGA outputs, Atleast one H0Mt output of 4K resolution, atjeast 1 VGA output with output upto 1920 x 1080, support H.265, MJpEG, supports N+1 hot spare system,supports RAtD0, RAtD1, RAtD5, RAtD6 and RAtDlO ,Supports HDD hot swap, SupporB Oual power-Redundant, tncoming Bandwidth 320 Mbps, 8 SATA Hard Disks, ANR Technology, 8 SATA interfaces for 8 HDDs and capacity of each HDD upto 8TB, 3 x USB at least 1 x USB with 3.0, Alarm t/O 1614, RS-485, RS-232, 2 R]-4S 10 /100/1000 Mbps self-adaptive Etherner interface, Multiple network monitoring: Web viewer, CE, FCC, UL certitied.

Supply, installation, Testing & commissioning of IP base PTZ Controller with required software, license & accessories as specified in Specification.

Supplying, erecting, testing and commissioning of 6TB Surveilance Hard Disk

Supply Installation Testing & commissioning of Client PC Hardware with a minimum speicification of Intel i7 Quad Core Processor 7th Generation at mim 3.6 GHz ,12M, Intel HD Graphic 630, 6.4GT/s, 4x4 GB or more of RAM, 500GB SATA,10K RPM 3.0Gb/s Hard Drive for OS and VMS Applications Network Interface Card - 10/100/1000 MB Network Fiber Interface Card - 4 x 1Gbps in fault tolerance configuration Video Card – nVidia 2 x NVS295 Quad Monitor Graphics card to support 4 multiplexed Monitors Motherboard should support Intel as well nVidia GPU in active-active mode and both devices should be enabled. DVD-R/W Microsoft® Windows® 8.1 / 10 Pro or Higher 64 bit

Supply Installation Testing & commissioning of 21" colour ,Flat Screen type Professional CCTV Surveillance HD monitor for above client workstation

Supply Installation Testing & commissioningof 55" colour , Flat Screen Type Professional CCTV Surveillance HD monitor for above client workstation

Supply Installation Testing & commissioningof 55" Video Wall Display with utra wide bezel Edge display with HD Resolution. Incluiding required accessories and Hardware

video wall Frame with required hardware and accessories

8 X 8 Video Wall Switcher with Processor Features

10 Meter HDMI Patch Cord

Supply, installation, Testing and Commissioning of 5 Meter GI powder coated poles for mouting of 2Nos. Of camera on each poles with necessary accessories incluiding require foundation for the same with IP66 rated outdoor housing for power supply point & media convertor.

IP Based KVM Switch with 10 Input and 4 Output with required modules, Software, License etc.

Supply, INstallation, Testing and Commissioning of Wireless Keyboard and Mouse with required patch cables and accessories.

FOH Speaker: Supply, installation, testing & Comissioning of Front-of- House left and right clusters with a 14" LF driver or better and multiple MF/HF drivers (More than 4), Biamplified 2 or 3 Way array loudspeaker system; with Individual Module free field Frequency Range (-10dB) of 55Hz - 18kHz or better & Continuous Power Handling of >= 750W LF + 150W MF/HF. The Loudspeaker module shall have a Max. SPL (Peak) of MF/HF>= 130 or better. It should have Horizontal near dispersion pattern of 40º or better, vertical dispersion of the array shall be 60 degrees or better.

Supply, installation, testing & Commissioning of OEM Couling plate for array modules offered above.

Mounting kit: Supply, installation, testing & Commissioning of OEM array frames/ Hanging/ Mounting arrangement for Suspension of upto 8-10 array modules offered above, Shall offer multiple rigging points for achieving desired pitch settings

Delay fill Spaker : Supply, installation, testing and commissioning of two-way a Single 8-inch or better high SPL IP55 rated surface mount loudspeaker. Frequency Range (-10 dB) of 80Hz - 18kHz or better; Nominal Dispersion : 90°H x 60°V or better; Power handling of 800W peak or more; Sensitivity : 92dB or better; Max SPL : 116dB Peak or more with a Nominal impedence of 8 ohms. Standard wall mount brackets shall be included

Subwoofer: Supply, installation, testing & Commissioning of a single 18" subwoofer. The louspeaker shall meet the following performance criteria: Frequency Range (-10 dB) of 29Hz - 300Hz. It should have an ground stack position Sensitivity of > = 98dB (1W/1m) or more delivering a ground position Max. Calculated SPL(peak) of >=133 dB; Nominal impedance of 4ohm or higher and continuous Power Handling of 750W or more. The loudspeaker system shall be comprised of a Baltic birch plywood enclosure with standard array rigging hardware for Cardioid as well as stacked position.

Custom Supsension for Subwoofers

Stage Monitors: Supply, installation, testing & Comissioning of passive coaxial two-way point source loudspeaker with a single 8" LF driver or better. Frequency Range (-10dB) of 75Hz - 20kHz or better & Continuous Power Handling of >= 150W or better. The Loudspeaker module shall have a Max. SPL (Peak) of MF/HF>= 128 or better. It should have Horizontal near dispersion pattern of 110º or better, vertical dispersion of the module shall be 60 degrees or better.

Supply , installation , testing and commissioning of Volume control for Green Room - Analog with back box

Amplifier: Supply, installation, testing and commissioning of 8 channel class D Networkable Power amplifier with a Max Output Power of 8x500W@8 ohms, or bridged mode output power of 4x 1000W @ 8/4 ohms. 20Hz - 20 KHz, SNR of 102dB and THD + N of <0.4% with built in protection such as Limiters, Temperature, DC, Short Circuit, Peak Current Limiters, Turn on delay etc. Built in DSP for Matrix routing, Speaker equalization, Delays, Array EQs etc complete with Ethernet Port for Network Control, programming and monitoring. Shall offer optional Network audio connectivity (Dante or CobraNet) through expansion slot.

Amplifier: Supply, Installation, testing and commissioning of 4 channel class D Networkable Power amplifier with a Max Output Power of 4x500W@8 ohms, or bridged mode output power of 2x 1000W @ 8/4 ohms. 20Hz - 20 KHz, SNR of 102dB and THD + N of <0.4% with built in protection such as Limiters, Temperature, DC, Short Circuit, Peak Current Limiters, Turn on delay etc. Built in DSP for Matrix routing, Speaker equalization, Delays, Array EQs etc complete with Ethernet Port for Network Control, programming and monitoring. Shall offer optional Network audio connectivity (Dante ) through expansion slot.

Amplifier: Supply, installation, testing and commissioning of Class D configurable amplifier with total 2 x 600W output power or better across 2 outputs, 4/8ohms, 70/100 Volt or mixed use operation; Frequency Response : 20Hz - 20kHz for LZ mode ;THD <0.04% at rated output

Amplifier: Supply, installation, testing and commissioning of Class D configurable four channel dante amplifier with total 600W output power or better across 4 outputs, 4/8ohms, 70/100 Volt or mixed use operation; Frequency Response : 20Hz - 20kHz ; S/N Ratio 100 db or more and THD <0.04% at rated output complete with standard accessories as required. Built in DSP for Matrix routing, Speaker EQs,PEQ ,bandpass, delays etc

Supply, Installation, testing & commissioning of Gooseneck microphone with table top stand with ON/OFF Switch; Gooseneck Length : 15" or better; Polar Pattern : Cardioid / hypercardioid / supercardioid; S/N Ratio : 65 dB or better; Max SPL for 1% THD : 107 dB or better; Freq Response : 50 Hz to 17kHz or better; LED Indication : Yes; RFI Sheilding : Yes; complete with all standard accessories as per the tender specification.

Supply, Installation, testing & commissioning of Shotgun Microphone with Type of transducer : Condenser; Polar Pattern : Cardioid / hypercardioid / supercardioid/ Lobe Pattern; Freq Response : 40Hz to 19kHz or better; Sensitivity : 21.1mV/Pa or better complete with all standard accessories as per the tender specification.

Supply, Installation, testing & commissioning of Wired handheld microphone with Type of transducer : Dynamic; Polar Pattern : Cardioid / hypercardioid / supercardioid; Freq Response : 50Hz to 15kHz or better; Sensitivity : 1.85mV or better complete with all standard accessories as per the tender specification.

Supply, Installation, testing and commissioning of Wireless handheld microphone with Polar Pattern : Cardioid / Hypercardioid / Supercardioid; RF Freq Range : 516 MHz to 865 MHz or better; Audio Bandwidth : 80 Hz to 15kHz or better; RF Power : 20mW or better; THD : <0.9% or better; S/N Ratio : >105 dB or better; as per the tender specications.

Supply, Installation, testing and commissioning of Wireless Lapel microphone with Polar Pattern : Cardioid / Hypercardioid / Supercardioid; RF Freq Range : 516 MHz to 865 MHz or better; Audio Bandwidth : 80 Hz to 15kHz or better; RF Power : 20mW or better; THD : <0.9% or better; S/N Ratio : >105 dB or better; as per the tender specications.

Supply , installation , testing and commissioning of The Drum Sets offer high-performance drum microphones from the Touring Gear series. Set of Minimum 7 microphones, 1 x bass Drum, Dynamic cardiod, 4 x Snare Drum Dynamic Supercardiod, 2 x Overhead microphons with close Drums, Cardiod, pattern. To be supplied with Soft carrying case.

Supply , installation , testing and commissioning of Antenna Splitter and combiner for above microphones

Supplying & erecting co-axial copper cable low voltage grade tri-shielded RG- 11 as per specification No. WG-TW

Supply of Light cations.weight tripod alluminium Microphone stand with Long Arm, boom type & chrome plating with standard mouting accessories as completed

Supply of Light weight tripod alluminium Microphone stand with short Arm, boom type & chrome plating as per the tender specifications.

Supply , installation , testing and commissioning of 3-pin, Single XLR-female table mount plate, Connector as per specification

Supply and fixing of 3 point XLR mic wall mount junction boxes with one Speakon Connector as per the tender specifications.

Supply and fixing of 1 point XLR mic junction boxes with one Speakon Connector as per the tender specifications.

Supplyb of CD player with USB as per the tender specifications.

Supply and laying of 2 core 2.5 sq mm PVC insulated Cu conduction loudspeaker cable as per the tender specifications.

Supplying, erecting, testing and commissioning of 2 core shielded cable complete as per specification no. FF-PA/MCC

Supply, termination, testing & commissioning of UL Listed Connectors as per the tender specifications.

Supply , installation , testing and commissioning of Multipurpose Controller Combining leading edge and signal dimming control system for Audience seating area only, Minimum 4 x 10A Leading Edge Dimmer, Minimum 4 x 10A Relay, Minimum 4 x 1-10V / DSI / DALI - Total load 40A, Overload Protection 4 x 10 A 6 kA single pole thermal magnetic circuit breakers, Regulating Device Triac - 40 A nom., 600 V, 400 A surge Switching Device Relay 16 A nom., 165 A surge, Control Inputs/Outputs One RS-485 DyNet / DMX512 serial port One programmable dry contact AUX input, Presets 100 nos with standard software & required accessories

Supply , installation , testing and commissioning of 8 Channel Snake cable for audio

Supply , installation , testing and commissioning of 8 port XLR patch panel to be mounted on Rear wall of Stage at Skirting level, All should be with Neutrick connectors only.

(VIDEO SYSTEM) Supply, lnstallation, Testing & installation of 600 Nits , 1.25.mm pixel LED wall tiles of 110mmx 60 mm to make a LED wall along with controller & processor to construct a led wall having a display area of 3.24 sq meters having an aspect ratio of 16:9 & 108" Diagonal size in a Cabinet made up of diecast Aluminium of 2400mm x 350mm x 49mm size not weighing above 113 kg per cabiet & having a Front access of 150mm & Back Access of 600mm. The LED wall should have Viewing Angle 160x150, DataProcessing Up to 16 Bit, Colours Up to 65536, No-HDR1O , Refresh>3g4o, Contrast 10000:1, Pixel Density 409600 pix / Sq-Mtr, Bonding Wire Copper Wire, Service Access Front, lngress protection lP20 having the following functinal features Screen Mirroring Ability to connect to 4 devices simultaneously (MacOS, iOS, Android, Windows), Screen Mirroring presets Multi pre-set for screen mirroring with an inbuilt 8.9"dock and a mirroring dongle. Control Screen should be operatable via ipad / Android Tablet, Wireless Central Control Host should be able to lock the presentation to one connected device Wireless Source Switching Change the source wirelessly via ipad / Android Tablet, Annotations : Annotate the screen wirelessly via iPad / Android Tablet. Take screenshod of annotation and share with users, lmage quality effect adjustment, Eye comfort mode, lmage quality effect adjustment, with a builtin controller & Led wall processor with min. 4 HDMI inputs and 4 HDMloutputs, as per site requirements with 7 year Manufacturers warranty

Supply & Installation of wall mounting structure for above LED wall.

SITC of 55" LCD panel with 3840 X 2160 resolution or better, USB playback,bluetooth and meracast connectivity,4X HDMI 2.0,DP1.2, HDR10,500 nits

Supply and Installation kit of tilted floor mount for confidence monitors of 55"

Supply, Installation, Testing and Commissioning of 2x1 auto switching HDBaseT 2.0 transmitter receiver set that supports the long distance transport of HDMI, VGA and High Speed USB 2.0 signals up to 100 meters / 330’ using category cabling. The set is 4K compatible with a max resolution of 4K@60Hz / 4:2:0 8bit deep color.Receiver features integrated 4 port USB 2.0 high speed device hub. An additional analog audio pass through input is located on the wall plate that allows for audio distribution to the HDBaseT receiver side. With 48V integrated PoH, the set can be powered via HDBaseT receiver with a PSE module or the wall plate can be powered by a local power supply. The set gives you the ability to automate the display power ON by using pre-loaded RS232 commands whenever a video signal is introduced to the system using either the HDMI or VGA input. It will also turn the display power OFF after a specified amount of time has passed when no video signal is present.Supply, Installation, Testing and Commissioning of Wireless presentation from Windows, Android and Apple devices, supports native screen mirroring, extended desktop and interactive touch displays, Native wireless screen mirroring means no apps or wires, Video -H.264 compression,Audio- LCPM 2.0,Resolution Up to 1080p30, Ethernet- 10/100 RJ-45 LAN, Miracast P2P: 802.11ac dual-band, Infrastructure: 802.11a/b/g/n dual-band, Authentication- WPA-PSK (TKIP), 1 x HDMI Output, 1 x VGA Output,1 x VGA Input (Pass-through),1 x Analog 3.5mm audio output, 1 x USB 2.0 Host Type-A

Supply, Installation, Testing and Commissioning of eight input by eight output HDMI 2.0 matrix switcher with HDCP 2.2 support and capable of handling resolutions up 4K@60Hz 4:4:4 / 8 bit color with static and dynamic HDR output support for each channel. The matrix features advanced independent EDID management control for each HDMI input as well as an Easy EDID analyzer. The analog and digital audio outputs can be set to follow the HDMI video route or can be independently routed either by API or web control interface. Built in re-clocking circuitry ensures the switcher is backwards compatible with sources with older HDMI version chip sets. The matrix switcher can be controlled via front panel buttons, front panel IR, external IR, remote IR, RS232, and Ethernet. The matrix includes a simple IR remote control to allow IR switching. The matrix also features a full command set for RS232 and Ethernet control with third party control systems, plus control via web user interface.

Supply, Installation, Testing and Commissionin of HDMI 2.0 HDBaseT Extension Set, Extend HDMI 2.0 signals up to 4K@60Hz / 4:4:4 up to 70m (4K 40m / 1080P 100m), Complete set Includes TX, RX, power supply, and IR flasher/emitter, Extends bi-directional IR. Flexible PoC (Power on either end), Supports HDR10, HDCP 2.2 compliant, Flexible power design (use power supply at TX or RX)

(AUDIO-VIDEO CONTROL SYSTEM) Supply, Installation, Testing and Commissionin of AV controller whcih should have minimum two bidirectional RS-232 serial port, one or more bidirectional RS-232/RS-422/RS-485 serial ports, one or more IR/Serial port for one-way control of external device, four or more I/O ports, four or more relays for controlling room functions, should support Ethernet monitoring and control , At least 1 GB RAM and 8 GB Flash , Should include any extra license required to integrate control processor with third party touch panel operating on android or iOS, to be used as primary user interface,

Supply, Installation, Testing and Commissionin of 10" Capacitive/ Resistive touch panel, with resolution 1024 x 600 or better, Brightness- 420 nits (cd/m2) or more, Contrast ratio 700:1 or better, Storage Memory-2 GB or more RAM and 8 GB or more Flash memory, data rate 10/100/1000Base-T, Viewing angle ±70° vertical & ±75° horizontal, Should have motion and light sensor, connectivity - RJ-45 connector,Should be supplied with all required accessories including tabletop mount

Supply, Installation, Testing and Commissionin of IR emitter for remotely controlling AV equipment via a tiny infrared light-emitting diode, emitter shield included, cable length at least 6 feet

Supply, Installation, Testing and Commissioning of 48 port POE network switch

Supply, Installation, Testing and Commissioning of 10' HDMI cable

Supply, Installation, Testing and Commissioning of HDMI PREMIUM 18G CBL W/NET 6'

Supply, Installation, Testing and Commissioning of 10' USBA-USB-B cable

Supply, Installation, Testing and Commissioning of Molded USB Male to Male 6ft cable

Supply, Installation, Testing and Commissioning of 23 AWG -4 Pair Sheiled CAT 6 Cable in existing conduit complete with all standard accessories

Supply, Installation, Testing and Commissioning of RJ45 Shielded connectors etc.

Supply, Installation, Testing and Commissioning fo UL Listed Connector complete with all standard accessories

Die cast Aluminium C - Clamp with safety chain duly epoxy polyester powder coated in black matt texture finish and safe working load of 100kg with below specifications. • Lock - MS threaded Galvanized lock key, • Plastic Glass filled nylon moulded M6 key. • Receptacle - 28mm standard TV spigot. • Safety - MS Galvanized chain with pin. • Finish - Pretreated and black epoxy polyester powder coated. • Self-weight - 0.54Kg

Safety bond with lock clip 1.5 Mtr Long made with twisted pair of GI wire rope 3mm thick with sleeve to be fixed around the grid to avoid fall of the material in case if the "C" clamp is not locked properly. SWL 100Kgs.

79mm Round Identification name plate duly epoxy polyester powder coated in matt texture finish.

Customized MS Suspenders made up of • MS fish plate 150 x 150 x 6 mm with hardware’s if required as per site condition • Height adjustable M12 stud of suitable length as per site requirement along with suitable hardware’s with pipe coupler clamp. (As per site requirement). • All the materials under gone through 7 tank process with various chemical treatment to keep them rust free with and duly epoxy polyester powder coated in black matt texture finish.

MS Pipe of Class ‘B‘ 48mm OD to be used for making 1x1mtr square matrix grid used for suspending Lighting fixtures and other equipment for fulfilling all the requirement for Studio Lighting.

Front of Stage Light Bar, length 9 Mtrs made using MS 40NB Class ‘B’ Pipe dual barrel construction arrangement undergone through various chemical treatment to keep them rust free and duly epoxy polyester powder coated in black matt texture finish with Below Specifications: • Dual barrel Light bar equipped with 40x75x40 Cable trenching arrangement with lid for better aesthetic look and cable safety. • Dual barrel pipe construction welded with 75x6mm MS Flat in every 1 Mtr for better strength • With Suitable Suspenders to fix the light bar with every 2mtr pitch.

MS Fabricated Lighting Junction box made up of 22SWG CRCA for LED lighting fixtures, black epoxy polyester powder coated, with 4 way 10A IEC sockets and pipe clamp arrangement with below specifications. • 4 way 10A IEC Socket • Fixing : Snap fit /15 (1.5mm), • CE certified FC/PG 11 cable entry gland, • Junction Box must be compact of Size : 140 x 112 x 50mm or less • with suitable fixing arrangement.

MS Fabricated 2 way IEC Junction box with rocker switch to power splitter and console made up of 22SWG CRCA, black epoxy polyester powder coated and pipe clamp arrangement. • 2 way 10A IEC Socket • DPST 4 Pins Toggle Button Rocker switch • CE certified FC/PG 11 cable entry gland, • Junction Box must be compact of Size : 140 x 112 x 50mm or less • with suitable fixing arrangement.

MS Fabricated 5 pin DMX Signal IN Junction box fitted with 5 pin DMX Male plug made up of 22SWG CRCA, black epoxy polyester powder coated and pipe clamp arrangement with below specifications. • 5 pin XLR DMX IN (Male plug) of reputed make connector, • New duplex ground contact for excellent contact integrity between chassis and cable connector, Larger solder contacts for easier termination, • Optional connection to easily join pin 1 to chassis ground. • CE certified FC/PG 7 cable entry gland, • Junction Box must be compact of 125 x 112 x 50mm or less • with suitable fixing arrangement.

MS Fabricated 5 pin DMX Signal OUT Junction box fitted with 5 pin DMX Female plug made up of 22SWG CRCA, black epoxy polyester powder coated and pipe clamp arrangement with below specifications.• 5 pin XLR DMX OUT (Female plug) of reputed make connector, • New duplex ground contact for excellent contact integrity between chassis and cable connector, Larger solder contacts for easier termination, • Optional connection to easily join pin 1 to chassis ground. • CE certified FC/PG 7 cable entry gland, • Junction Box must be compact of 125 x 112 x 50mm or less • with suitable fixing arrangement.

MS Fabricated Auxilliary marshalling box made up of 22SWG or lesser SWG CRCA sheet, black epoxy polyester powder coated with hinged door and screw lock.

SITC of MS Fabricated Direct Lighting Distribution Board fitted with 63A TPN Incomer and 24 Way SP MCB Panel, RYB Indicators and suitable size gland for Incomer and outgoing cables with Terminal connectors & FRLS Grade cables for internal wiring and door, duly epoxy polyester powder coated.

RDM Compatible Digital Lighting Console with Ultimate portability, offering a powerful LED and moving light controller in a small 19” unit with direct access to each of the lights. • 1024 DMX Channel • LDC Screen for easy Navigation • DMX compatible • Control up to 120 LED, moving lights and conventionals individuals • RDM & Artnet support with ethernet port • multi-function faders

5 pin XLR male / female connectors of made up of Extra high temperature resistant insulator material, Larger solder contacts for easier termination of reputed make.

5 Pin XLR Termination plug made up of extra high temperature resistant insulator material, Larger solder contacts for easier termination with 120 Ohm resister with 0.25Watt for signal termination as per specification.

Valcro Tape Reel of 10 Mtrs (White if available)

MS perforated trays of size 40 x 75 x 40mm undergone through 7 tank process with various chemical treatment to keep them rust free, duly epoxy polyester powder coated with Matt black texture finish along with clamping arrangement.

Supplying and erecting annealed bare copper wire of high purity of required sizes used for earthing on wall with necessary copper clamps fixed on wall/cable/conduit with screws complete.

PVC Copper unarmoured flexible FRLS insulated multicore cable 1100V grade confirming to IS694 size 3cx1.5 sq mm.

FR CE Certified DMX signal cable for DMX network.

Main Valance Bar, length 14 Mtrs made using MS Pipe 40NB Class 'B' arrangement undergone through various chemical treatment to keep them rust free and duly epoxy polyester powder coated in black matt texture finish with suitable suspenders.

Main Curtain track system 14 Mtrs long, center parting with overlap of 0.9mtr arrangement undergone through various chemical treatment to keep them rust free and duly epoxy polyester powder coated in black matt texture finish with Below Specifications: • Heavy duty curtain track duly epoxy polyester powder coated in black matt texture finish. • 1.5HP Motor, 3 Phase Motor. • GI wire ropes with steel core at center. • Curtain holding trollies placed uniformly at specific interval of 200mm /250 mm throughout the track. • Diverter pulley • MS yellow passivized Routing pulleys with ball bearing for smoother noiseless movement 165mm for outer diameter, 145mm diameter at groove base with 12mm pulley thickness. • All the materials under gone through 7 tank process with various chemical treatment to keep them rust free with and duly epoxy polyester powder coated in black matt texture finish.

Fixed Rear Curtain track system 12.5 Mtrs long, center parting with overlap of 0.9mtr arrangement undergone through various chemical treatment to keep them rust free and duly epoxy polyester powder coated in black matt texture finish with Below Specifications: • Heavy duty curtain track duly epoxy polyester powder coated in black matt texture finish. • Curtain holding trollies placed uniformly at specific interval of 200mm /250 mm throughout the track. • All the materials under gone through 7 tank process with various chemical treatment to keep them rust free with and duly epoxy polyester powder coated in black matt texture finish.

MS, Wing frame made out of 25X25mm or higher size made of MS square pipe with 2mm in thickness undergone through various chemical treatment to keep them rust free and duly powder coated in black matt texture finish with Below Specifications: • Wing Frame Size 8 x 4 Mtr • All the materials under gone through 7 tank process with various chemical treatment to keep them rust free with and duly epoxy polyester powder coated in black matt texture finish.

Fire retardant velvette fabric 100% (2 times of the finished dimension) gathering for main vallance as per the approved patern and colour, not less than 250 GSM, duly stitched along with and eyelets. Size :L 14 Mtr x H 4 Mtr.

Fire retardant velvette fabric with lining 100% (2 times of the finished dimension) gathering for main curtain as per the approved patern and colour, not less than 300 GSM, duly stitched along with eyelets. Size: L 15 Mtr x H 8 Mtr.

Fire retardant cotton fabric 50% gathering for Rear Curtain as per the approved patern and colour, not less than 250 GSM, duly stitched along with eyelets. Size: L 14 Mtr x H 8 Mtr.

Fire retardant cotton fabric 50% gathering for Frill as per the approved patern and colour, not less than 250 GSM, duly stitched along with eyelets. Size: L 13 Mtr x H 4 Mtr.

Fire retardant cotton fabric 0% gathering for Wings as per the approved patern and colour, not less than 250 GSM, duly stitched along with eyelets. Size: L 10 Mtr x H 8 Mtr.

MS Fabricated Motor Cable Termintion box made up of 22SWG or lesser SWG CRCA sheet, black epoxy polyester powder coated with hinged door and screw lock.

MS Fabricated Combined 1 Way Motor Control Center panel cum Remote Control panel for Curtain system made up of CRCA sheet undergone through 7 tank process with various chemical treatment to keep them rust free, duly epoxy polyester powder coated with Matt seaman’s grey texture finish.

FRLS PVC copper multistrand flexible cable 7 core x 1.5 sq.mm.

FRLS PVC Copper flexible FRLS insulated multicore cable 1100V grade confirming to IS694 size 4cx4 sq mm.

Cyclorama frame arrangement of size 14 Mtr x 6 Mtr undergone through various chemical treatment to keep them rust free and duly powder coated in black matt texture finish with Below Specifications: • MS fabricated Grid/wall mount bracket • MS powder coated Leading edge pipe • All the MS materials under gone through 7 tank process with various chemical treatment to keep them rust free with and duly epoxy polyester powder coated in black matt texture finish.

Perforated plastic Cyclorama screen with seam welded, off white, with eyelets along all four sides, perforated plastic screen with eyelets. Size: L 12 Mtr x H 8 Mtr.

Supplying & erecting Carbon Dioxide (CO2) fire extinguisher of 4.5 kg. capacity cartridge type conform to IS 2878 /15683 complete erected with necessary clamp made from 50 x 6 mm. M. S. flat with nut & bolts routed in wall complete.

Supplying, installation, testing and commissioning of main fire pump(MFP /EP) suitable for water discharge of 2280 to 2850 LPM at 120 to 90 m head driven by electric motor 415 volts, 3 phase 50 Hz, AC supply of 75kW or of suitable kW capacity for manual/automatic operation and consisting of following (a) Horizontal type, single stage, centrifugal/split casing pump of cast iron body & bronze impeller with stainless steel shaft(SS410 grade), mechanical seal conforming to IS 1520. (b) Squirrel cage induction motor, TEFC, synchronous speed 3000 RPM, suitable for operation with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325.(c) M.S. fabricated common base plate, coupling, coupling guard, foundation bolts etc. as required. (d) Erected on provided suitable size cement concrete foundation duly plastered with anti vibration pads with perfect aligning, proper levelling complete pump set with accessories duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003) complete as per specification no. FF-MFP/SSC/EP

(MFP/DP) suitable for water discharge of 2280 to 2850 LPM at 120 to 90 m head driven by 110 HP or suitable HP capacity diesel engine at required working speed suitable for automatic operation and consisting of following : (a) Horizontal type, single stage, centrifugal casing pump of cast iron body & bronze impeller with stainless steel shaft(SS410 grade), mechanical seal conforming to IS 1520. (b) Water cooled with radiator, diesel engine conforming to relevant IS standard complete with auto starting mechanism, 12/24 volts DC electric starting equipment with battery of required AH capacity with necessary charger suitable to work on 230v, 50Hz AC supply, diesel tank of minimum 150ltr capacity with first filling of diesel up to 100% level with necessary piping with valves up to engine , exhaust pipe extended up to 10 m outside pump house duly insulated with 50 mm thick glass wool with 1.0 mm thick aluminium sheet cladding, residential silencer, instruments and protection as per standard specification, stop solenoid for auto stop in the event of fault with audio indications etc. as required. (c) M.S. fabricated common base plate, coupling, coupling guard, foundation bolts etc. as required. (d) Erected on provided suitable size cement concrete foundation duly plastered with anti vibration pads with perfect aligning, proper levelling complete pump set with engine assembly and accessories duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003) complete, as per specification no. FF-MFP/SSC/DP

Supplying, installation, testing and commissioning of jockey fire pump (JP) suitable for water discharge of 180 to 240 LPM at 110 to 90 m head driven by electric motor 415 volts, 3 phase 50 Hz, AC supply of 11 kW or of suitable kW capacity for manual/automatic operation and consisting of following (a) Horizontal/vertical type, multi stage, centrifugal casing pump of cast iron body & bronze impeller with stainless steel shaft (SS410 grade), mechanical seal conforming to IS 1520. (b) Squirrel cage induction motor, TEFC, synchronous speed 3000 RPM, suitable for operation with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325. (c) M.S. fabricated common base plate, coupling, coupling guard, foundation bolts etc. as required. (d) Erected on provided suitable size cement concrete foundation duly plastered with anti vibration pads with perfect aligning, proper levelling complete pump set with accessories duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003) complete, as per specification no. FF-MFP/JP

Supplying, installation, testing and commissioning of booster fire pump [BP] suitable for water discharge of 900 LPM at 35 m head driven by electric motor 415 volts, 3 phase 50 Hz, AC supply of 7.5 kW or of suitable kW capacity for manual/automatic operation and consisting of following : (a) Horizontal/vertical type, single/multi stage, centrifugal casing pump of cast iron body & bronze/CI impeller with stainless steel shaft (SS410 grade), mechanical seal conforming to IS 1520. (b) Squirrel cage induction motor, TEFC, synchronous speed 3000 RPM, suitable for operation on with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325. (c) M.S. fabricated common base plate, coupling, coupling guard, foundation bolts etc. as required. (d)Erected on provided suitable size cement concrete foundation duly plastered with anti vibration pads with perfect aligning, proper levelling complete pump set with accessories duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003) complete, as per specification no. FF-MFP/BP

Supplying, erecting & terminating XLPE armoured cable 3 core 6 sq. mm. copper conductor continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 2 core 2.5 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Supplying and installing pressure gauge of 100 mm dia., 0-300 PSI or 0-14 kg per cm square fitted with 12/15 mm dia. pad cock valve, and G.I. pipe, elbow etc. complete as per specification no. FFFFA/PG

Supplying and installing pressure switch with 12/15 mm dia isolation valve, G.I. nipple, elbow, etc complete as per specification no. FF-FFA/PS

Supplying and erecting G.I. pipe ‘C’ class ERW 200 mm dia with necessary fittings complete as per specification no. FF-PP

Supplying and erecting G.I. pipe ‘C’ class ERW 150 mm dia with necessary fittings complete as per specification no. FF-PP

Providing coating of bitumen paint & 4mm thick wrapping for underground 150 mm ring main of fire fighting system.

Excavating hard murum / stone metal road by chiselling for preparing pit for poles stay or earth plates or for laying cables, pipes & clearing the site by removing debris & making the site as required complete.

Supplying and erecting G.I. pipe ‘C’ class ERW 100 mm dia with necessary fittings complete as per specification no. FF-PP

Supplying and erecting G.I. pipe ‘C’ class ERW 75/80 mm dia with necessary fittings complete as per specification no. FF-PP

Supplying and installing G.I. pipe above ground of C class ERW of size 65 mm dia with with necessary fittings as per specification no. FF-PP

Supplying and installing G.I. pipe above ground of C class ERW of size 50 mm dia with with necessary fittings as per specification no. FF-PP

Supplying and erecting ISI mark GI pipe 40 mm. dia ‘C” class at position with accessories complete. Specification no. CW-PLB/GP.

Supplying and erecting ISI mark GI pipe 32 mm. dia ‘C” class at position with accessories complete. Specification no. CW-PLB/GP

Supplying and installing G.I. pipe above ground of C class ERW of size 25 mm dia with with necessary fittings as per specification no. FF-PP

Supplying and erecting 200 mm dia cast iron double flange NRV complete with PN16 pressure rating, as per specification no. FF-VL/NRV

Supplying and erecting 150 mm dia cast iron double flange NRV complete with PN16 pressure rating, as per specification no. FF-VL/NRV

Supplying and erecting 75/80 mm dia cast iron double flange NRV complete with PN16 pressure rating, as per specification no. FF-VL/NRV

Supplying and erecting 200 mm dia. cast iron double flange butterfly valve of size complete with PN16 pressure rating, as per specification no. FF-VL/BFV

Supplying and erecting 150 mm dia. cast iron double flange butterfly valve of size complete with PN16 pressure rating, as per specification no. FF-VL/BFV

Supplying and erecting 65 mm dia. cast iron double flange butterfly valve of size complete with PN16 pressure rating, as per specification no. FF-VL/BFV

Supplying and erecting 75/80 mm dia. cast iron double flange butterfly valve of size complete with PN16 pressure rating, as per specification no. FF-VL/BFV

Supplying and erecting stainless steel Double outlet hydrant valve fitted with necessary accessories complete as per specification no. FF-VL/HV

Supplying and erecting stainless steel single outlet hydrant valve fitted with necessary accessories complete as per specification no. FF-VL/HV

Supplying and erecting stainless steel branch pipe 63 mm dia fitted with 20 mm dia detachable hexagonal nozzle complete as per specifications no. FFFFA/NZ

Supplying fire fighting reinforced rubber lined (R.R.L.) hose pipe, 63mm dia, 15m in length, fitted with necessary accessories complete as per specification no. FF-FFA/RRL

Supplying and erecting M.S./CRCA cabinet for housing Floor Hydrant valve, hose pipe, hose reel and branch pipe (size 1000 x 736 x 736 mm.) made from 16 SWG sheet and angle iron 25 x 25 x 4 mm. having front doors with viewing glass (8"x6") and locking arrangement with necessary fixing material such as rubber bidding etc. duly painted in post box red colour( Code 538 of IS 5

Supplying and erecting 20/25mm dia gun metal air release cock, with necessary G.I. coupling to be fitted on top of air vessel or on wet riser complete as per specification no. FF-FFA/ARV

Supplying and erecting 300 mm dia 1.5m in height air vessel / tank fabricated from min 5mm thick M.S. sheet complete as per specification no. FF-FFA/ACT

Supplying and erecting 150 mm dia fire brigade header suitable for supplying water in fire tank complete as per specification no. FF-FA/FBC

Supplying and erecting fire brigade header ( Siamese connection )of 150 mm dia, for supplying water in fire tank complete as per specification no. FFFA

Supplying and erecting 75/80 mm dia Cast Iron end line strainer of Y-type flanged end pattern, PN16 pressure rating, SS screen, end connection with Flanged / Screwed / Socket Weld / Butt Weld End etc with standard OAR (open area Ratio) for positive suction complete as per specification no. FF-VL/ELS

Supplying and erecting 150 mm dia Cast Iron end line strainer of Y-type flanged end pattern, PN16 pressure rating, SS screen, end connection with Flanged / Screwed / Socket Weld / Butt Weld End etc with standard OAR (open area Ratio) for positive suction complete as per specification no. FF-VL/ELS

Supplying and erecting 100 mm dia Cast Iron end line strainer of Y-type flanged end pattern, PN16 pressure rating, SS screen, end connection with Flanged / Screwed / Socket Weld / Butt Weld End etc with standard OAR (open area Ratio) for positive suction complete as per specification no. FF-VL/ELS

Supplying and installing wall mounting swinging hose reel drum fitted with 19 mm dia. 30m long high pressure polypropylene (Polyhose) along with necessary accessories complete as per specification no. FF-FFA/HV

Supplying and erecting brass orifice plate having 6 mm. thickness, 140 mm outer dia with required diameter of inner hole at every single outlet hydrant valve as per specification no. FF-FFA/OP

Supplying and erecting brass orifice plate having 6 mm. thickness, 160 mm outer dia with required diameter of inner hole at every double outlet hydrant valve as per specification no. FF-FFA/OP

Supplying & laying (including excavation) 25 cm dia RCC Hume pipe of standard thickness at required depth up to 90 cms. below road / ground surface, for covering provided cable & necessary back filling with light ramming to make the road/ground surface as it was (Except bitumen carpet).

Supplying and erecting 25 mm dia gun metal gate valve complete with PN16 pressure rating, as per specification no. FF-VL/GV

Supplying, erecting, testing and commissioning of quartzoid bulb sprinkler, 15 mm (½") dia. NBCM Body chrome finished, 68º C fixed temperature rating with deflector disc of conventional construction complete as per specification no. FF

Supply, Installation, testing & commissioning of UL listed / FM approved S S Braided flexible drops 25 mm dia capable to with stand maximum working pressure of 175 psi with all fittings for making connection to sprinklers and with the branches 1.2 Mtrs in length

Supplying and erecting 200 mm dia. cast iron double flange sluice valve complete with PN16 pressure rating, as per specification no. FF-VL/SV

Supply & Installation of Stainless steel finish rossette plate of dia 75 mm for below false ceiling application as per specification

Supply, Installation, testing & commissioning of Installation control (Alarm) valve of cast iron body and brass/ bronze working parts comprising of water motor alarm, bronze seat clapper, and clapper arm, hydraulically driven mechanical gong bell to sound continuous alarm when the wet riser sprinkler system activates, pressure gauges, emergency releases, strainer, pressure switch, cock valve complete with drain valve and bypass, test control box ball valves, MS pipe of reqd. size, flanges, orifice plate, gasket etc. of size 150 mm dia as reqd.

Supply, Installation, testing & commissioning of Deluge valve complete with accessories, water motor alarm, bronze seat clapper, and clapper arm, hydraulically driven mechanical gong bell to sound continuous alarm when system activates, pressure gauges, emergency releases, strainer, MS pipe of reqd. size, flanges, orifice plate, gasket etc., Wet pilot Trim (electrically operated) of size 150 mm dia.

Supply, Installation, testing & commissioning of curtain open type sprinkler having K-53 (15 mm dia) complete with socket / Tee & accessories as required . (UL listed / FM approved )

Supplying, erecting, testing and commissioning vane type water flow detector 100 mm dia. with 1) Visual switch activation 2) Rugged switch assembly 3) Heavy duty aluminium pipe saddles 4)Durable metal enclosure 5) Steel U bolts for secure mounting 6) Two SPDT ( Single pole double track ) synchronised switches 7) serviceable without draining pipes.

supply, installation & Testing of 150mm Rubber Expansion bellows with standard mouting accessories

supply, installation & Testing of 100mm Rubber Expansion bellows with standard mouting accessories

Supplying and erecting RCC chamber cover with frame 60cmx45cm medium duty 100kg with lifting arrangement including laying of angle iron frame of angle size as 50 x 50 x6 mm to be fixed /embedded on top of chamber complete.

supply, installation & Testing 50mm Ball Valve with standard accessories

Supplying and erecting iron work, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority.

Providing earthing with galvanized iron earth plate size 60 x 60 x0.6 cm complete with all materials, testing & recording the results as per specification no. EA-EP

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3 core 50 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid inprovided trench/ pipe as per specification no. CB-LT/AL

Supplying and erecting fire resistant mortar (20 kg) with fire resistance class S90 as per National Electrical Code (NEC) SP30-2011 suitable to seal the openings of all kinds of cables, pipes and cable support system in steel, aluminium and plastic profiles ( except hollow core conductors). The residual openings shall be closed with filler, as per specification no FF-FRM

Epoxy painting on both side of approved colour shade of provided iron work / MS / CRCA sheet steel work complete along with anti-rust treatment complete.

Removing of Existing Fire Pipe

Supplying & erecting of ON/OFF Push Button in Glass Flip Guard for Booster Pump

SITC of Electric Traction Passenger Lift with · Rated capacity :- 16 Passenger/1088Kg · Floors :- G+6 floor (7 Stops/7 Landings) · Travel :- 21 to 29.4 mtrs · Location of Lift Machine:- MR/MRL · Rated speed :- 1.5mps VS · Car/Landing door clear opening of 1000mm wide x 2000 mm high · Clear Car size of 1600 mm wide x 1600.mm deep x 2250mm high · Lift shaft available having clear size of 2300mm wide x 2500mm deep, 1500mm Pit depth, 1950mm Overhead. Doors type :- COPO/TOPO Doors with frame made from SS 304 grade solid(non-cladded) sheet of 1mm thick in hairline finish for car and all landing doors with SS door architraves/frames The lift doors shall have minimum 1 hour fire rating (with submission of necessary valid test certificate issued by NABL accredited or Independent test laboratory). Lift car enclosure made from SS 304 grade solid (non-cladded) sheet of 1.5mm, thick with hairline finish with frame made from MS girders, bracing of adequate size with minimum safety factor of 5, with Toe Guard Apron, with necessary false ceiling with adequate LED lights, blower/fan for ventilation & SS chequered plate flooring, handrails, mirror, emergency light etc. The lift car interior design shall be done as per the directions of engineer in charge. COP with SS face plate having metallic push buttons with Braille code & luminous indicator around button with FPI, scrolling UP/DN LED indicator & with / without attendant key switch, OWD with audio-visual alarm, VAS in Marathi, Hindi & English with intercom system with telephone instrument in Lift car, LMR & FCC/ground floor. LOP with SS face plate having recess/surface push button box for all landings with scrolling UP/DN LED indicator having metallic push buttons with Braille code & luminous indicator around button with CPI, Lift car arrival & next travel direction audio-visual indication at all landings.Lift controller based on microprocessor/ PLC with VVVF Drive having closed loop control system, with IBMS compatible having necessary port. The controller shall have necessary protections such as overcurrent, overvoltage, over speed, overheat for all devices including lift motor and travel direction protection, protection for phase loss at input or output etc. various operation modes such as maintenance, change direction by attendant, full load bypass, VIP call operation, self levelling operation, call cancel facility, auto return to home landing, fireman evacuation operation, earthquake operation, door open/close operation from COP etc. The system can record information for minimum 30 latest faults, with real-time clock management and handheld keypad with LCD screen for view and setting of parameters. The control panel duly wired with proper size & strength, copper wire for power & control circuit, with provision for addition of floor/control card & allied accessories control panel having enclosure of 1.5mm CRCA sheet with powder coating with IP54 Protection class.· ARD complete with necessary SMF VRLA batteries. Fireman controller having fireman switch at fire Landing. CCTV surveillance system comprises of 2 nos minimum 2.0MP FHD IP based vandal proof Dome camera in lift car & in LMR/inside lift shaft top aimed on Lift machinery & controller with NVR kept in LMR/FCC with HDR data backup for min. 90 days with min. 20" FHD TV monitor, to be kept in FCC/LMR as directed by Engineer In Charge. Lift Machine of Gearless PMSM of suitable kW with duty cycle of minimum 120 starts/hr (with submission of necessary valid test certificate issued by NABL accredited or Independent test laboratory), with Traction pulley, OSG, electromagnetic brakes, entire assembly mounted on adequate size girders duly fixed on LMR floor/ shaft walls complete with main/diverter traction sheaves, suspension wire ropes/belts of adequate size & strength. Other mechanical parts such as 'T' section adequate size guide rails for car & counter weight with brackets fasteners, counter weight frame with necessary blocks, buffers with necessary support arrangement, MS pit ladder etc. erected with necessary steel work. Minor civil work such as alteration work if any necessary for erection of landing door frames and it's accessories e.g. sill, header, hole pass etc complete with plaster finish, civil work for erection buffers, erection of lift machinery, adequate size core cuts if required & scaffolding for erecting guide rails, providing and fixing steel girders/RCC work having adequate strength for mounting and hoisting lift machine etc. complete as per specification no. LFT. · General: - Job includes entire procedure of obtaining all necessary erection permissions & "License to Work the Lift" from Electrical Inspector(Lifts) with submission to the Engineer In Charge. The above rate includes Fully Comprehensive AMC for one year from the date of commissioning

SITC of Electric Traction Passenger Lift with · Rated capacity :- 4 Passenger/272Kg (BOOK LIFT)Lift controller of simplex full collective based on microprocessor/ PLC with VVVF Drive having closed loop control system, with IBMS compatible having necessary port. The controller shall have necessary protections such as overcurrent, overvoltage, over speed, overheat for all devices including lift motor and travel direction protection, protection for phase loss at input or output etc. ,various operation modes such as maintenance, change direction by attendant, full load bypass, VIP call operation, self levelling operation, call cancel facility, auto return to home landing, fireman evacuation operation, earthquake operation, door open/close operation from COP etc. The system can record information for minimum 30 latest faults, with real-time clock management and handheld keypad with LCD screen for view and setting of parameters, The control panel duly wired with proper size & strength, copper wire for power & control circuit, with provision for addition of floor/control card & allied accessories control panel having enclosure of 1.5mm CRCA sheet with powder coating with IP54 Protection class. ARD complete with necessary SMF VRLA batteries. · Fireman controller having fireman switch at fire Landing. CCTV surveillance system comprises of 2 nos minimum 2.0MP FHD IP based vandal proof Dome camera in lift car & in LMR/inside lift shaft top aimed on Lift machinery & controller with NVR kept in LMR/FCC with HDR data backup for min. 90 days with min. 20" FHD TV monitor, to be kept in FCC/LMR as directed by Engineer In Charge. Lift Machine of Gearless PMSM of suitable kW with duty cycle of minimum 120 starts/hr (with submission of necessary valid test certificate issued by NABL accredited or Independent test laboratory), with Traction pulley, OSG, electromagnetic brakes, entire assembly mounted on adequate size girders duly fixed on LMR floor/ shaft walls complete with main/diverter traction sheaves, suspension wire ropes/belts of adequate size & strength. Other mechanical parts such as 'T' section adequate size guide rails for car &counter weight with brackets fasteners, counter weight frame with necessary blocks, buffers with necessary support arrangement, MS pit ladder etc. erected with necessary steel work. Minor civil work such as alteration work if any necessary for erection of landing door frames and it's accessories e.g. sill, header, hole pass etc complete with plaster finish, civil work for erection buffers, erection of lift machinery, adequate size core cuts if required & scaffolding for erecting guide rails, providing and fixing of girders of adequate strength for mounting and hoisting lift machine etc. complete as per specification no. LFT. General: - Job includes entire procedure of obtaining all necessary erection permissions & "License to Work the Lift" from Electrical Inspector(Lifts) with submission to the Engineer In Charge. The above rate includes Fully Comprehensive AMC for one year from the date of commissioning. · Floors :- L1+L2+G+6 floor (9 Stops/9 Landings) · Travel :- 21 to 29.4 mtrs · Location of Lift Machine:- MR/MRL · Rated speed :- 1.5mps VS · Car/Landing door clear opening of 800 mm wide x 2000 mm high · Clear Car size of 800 mm wide x 1000 mm deep x 2250mm high · Lift shaft available having clear size of 1400mm wide x 2200mm deep, 1600mm Pit depth, 4650mm Overhead. · Doors type :- COPO/TOPO Doors with frame made from SS 304 grade solid(non-cladded) sheet of 1.5mm thick in hairline finish for car and all landing doors with SS door architraves/frames The lift doors shall have minimum 1 hour fire rating (with submission of necessary valid test certificate issued by NABL accredited or Independent test laboratory). Lift car enclosure made from SS 304 grade solid (non-cladded) sheet of 1.5mm, thick with hairline finish with frame made from MS girders, bracing of adequate size with minimum safety factor of 5, with Toe Guard Apron, with necessary false ceiling with adequate LED lights, blower/fan for ventilation & SS chequered plate flooring, handrails, mirror, emergency light etc. The lift car interior design shall be done as per the directions of engineer in charge.COP with SS face plate having metallic push buttons with Braille code & luminous indicator around button with FPI, scrolling UP/DN LED indicator & with / without attendant key switch, OWD with audio-visual alarm, VAS in Marathi, Hindi & English with intercom system with telephone instrument in Lift car, LMR & FCC/ground floor. LOP with SS face plate having recess/surface push button box for all landings with scrolling UP/DN LED indicator having metallic push buttons with Braille code & luminous indicator around button with CPI, Lift car arrival & next travel direction audio-visual indication at all landings.

SITC of Duplex Lift control system for two nos. microprocessor/PLC based simplex lift controllers along with necessary software with programming and hardware e.g. logic board, necessary communication/ control/data cabling laying in rigid PVC conduits/trunking etc. complete.

Supplying, erecting, testing and commissioning of 6 HP, VRF / VRV air conditioning system, out door unit (ODU) complying type-IV OEM standards working on HFC free refrigerant R410A or other required/suitable green equivalent refrigerant, for cooling capacity delivering 100% at 47 deg. celcius and non stop cooling even at 56 deg. celsius and coefficient of performance (COP) 3.00 to 4.00, modular type horizontal/vertical hot air discharge suitable for total piping length upto 1000 metre operation in cooling mode with inverter based VRF/VRV technology microprocessor based control compressor starter/control panel complete with scroll compressor, air cooled anti corrosive copper condenser coil of suitable shape for increasing maximum heat transfer area, built in oil separator, accumulator and oil receiver, copper tube aluminium fin air cooled condenser, condenser fan with motor suitable for 415V ± 10%, 50 Hz, 3 phase power supply, internal copper refrigerant piping, internal wiring and first charge of refrigerant, etc. all housed in powder coated weather proof cabinet on provided angle iron frame or suitable foundation connected to the system in approved manner complete.

Supplying, erecting, testing and commissioning 7 HP to 8 HP, VRF / VRV air conditioning system, out door unit (ODU) complying type-IV OEM standards working on HFC free refrigerant R410A or other required/suitable green equivalent refrigerant, for cooling capacity delivering 100% at 47 deg. celcius and non stop cooling even at 56 deg. celsius and coefficient of performance (COP) 3.00 to 4.00, modular type horizontal/vertical hot air discharge suitable for total piping length upto 1000 metre operation in cooling mode with inverter based VRF/VRV technology microprocessor based control compressor starter/control panel complete with scroll compressor, air cooled anti corrosive copper condenser coil of suitable shape for increasing maximum heat transfer area, built in oil separator, accumulator and oil receiver, copper tube aluminium fin air cooled condenser, condenser fan with motor suitable for 415V ± 10%, 50 Hz, 3 phase power supply, internal copper refrigerant piping, internal wiring and first charge of refrigerant, etc. all housed in powder coated weather proof cabinet on provided angle iron frame or suitable foundation connected to the system in approved manner complete.

Supplying, erecting, testing and commissioning 16 HP, VRF / VRV air conditioning system, out door unit (ODU) complying type-IV OEM standards working on HFC free refrigerant R410A or other required/suitable green equivalent refrigerant, for cooling capacity delivering 100% at 47 deg. celcius and non stop cooling even at 56 deg. celsius and coefficient of performance (COP) 3.00 to 4.00, modular type horizontal/vertical hot air discharge suitable for total piping length upto 1000 metre operation in cooling mode with inverter based VRF/VRV technology microprocessor based control compressor starter/control panel complete with scroll compressor, air cooled anti corrosive copper condenser coil of suitable shape for increasing maximum heat transfer area, built in oil separator, accumulator and oil receiver, copper tube aluminium fin air cooled condenser, condenser fan with motor suitable for 415V ± 10%, 50 Hz, 3 phase power supply, internal copper refrigerant piping, internal wiring and first charge of refrigerant, etc. all housed in powder coated weather proof cabinet on provided angle iron frame or suitable foundation connected to the system in approved manner complete.

Supply, installation, testing and commissioning of VRF/VRV based ceiling suspended 4 Way cassette room/indoor unit (IDU-compact/standard size) of nominal cooling capacity 1.5TR (512 cfm) to 1.8TR (618 cfm) having EER as per BEE standards and specifications, suitable as per site requirement with swing louvers and adjustable blades from sides. IDU with drainage arrangements, fan, refrigerant liquid and refrigerant piping, cordless remote control, and fresh air port etc. IDU shall have anti corrosive coating suitable for coastal area in all respects suitable to operate on 1-phase, 230V, 50Hz, AC supply complete. The unit consisting with any additional refrigerant and oil charge as per requirement during installation.

Supply, installation, testing and commissioning of VRF/VRV based ceiling suspended 4 Way cassette room/indoor unit (IDU-compact/standard size) of nominal cooling capacity 2.0TR (618 cfm) to 2.3TR (671 cfm) having EER as per BEE standards and specifications, suitable as per site requirement with swing louvers and adjustable blades from sides. IDU with drainage arrangements, fan, refrigerant liquid and refrigerant piping, cordless remote control, and fresh air port etc. IDU shall have anti corrosive coating suitable for coastal area in all respects suitable to operate on 1-phase, 230V, 50Hz, AC supply complete. The unit consisting with any additional refrigerant and oil charge as per requirement during installation.

Supply, installation, testing and commissioning of VRF/VRV based ceiling suspended 4 Way cassette room/indoor unit (IDU-compact / standard size) of nominal cooling capacity 3.0TR (1100 cfm) to 3.2TR (1165 cfm) having EER as per BEE standards and specifications, suitable as per site requirement with swing louvers and adjustable blades from sides. IDU with drainage arrangements, fan, refrigerant liquid and refrigerant piping, cordless remote control, and fresh air port etc. IDU shall have anti corrosive coating suitable for coastal area in all respects suitable to operate on 1-phase, 230V, 50Hz, AC supply complete. The unit consisting with any additional refrigerant and oil charge as per requirement during installation.

Supply, installation, testing and commissioning of VRF/VRF based concealed split ductable type, high static indoor unit (IDU) having nominal cooling capacity of 1.2TR ( 400 cfm ) to 1.7TR ( 600 cfm ) having EER as per BEE standards and specifications with evaporator fan with motor, copper tube aluminium fin evaporator coil, washable air filter, insulated drain tray, condensate pump, expansion device, cordless remote control with necessary controls and electrical terminal to receive power supply, etc. IDU shall have anti-corrosive coating suitable for coastal area, with necessary ceiling suspension arrangement having an electronic control console with providing any additional refrigerant and oil charge as per requirement during installation connected with the system complete.

Supply, installation, testing and commissioning of VRV / VRF based ductable type, high static indoor unit (IDU) having nominal cooling capacity of 3.1TR ( 1240 cfm )to 4.0TR ( 1600 cfm ) having EER as per BEE standards and specifications with evaporator fan with motor, copper tube aluminium fin evaporator coil, washable air filter, insulated drain tray, expansion device, cordless remote control with necessary controls and electrical terminal to receive power supply, etc. having anti-corrosive coating suitable for coastal area, with suitable ceiling suspension arrangement, with an electronic control console and any additional refrigerant and oil charge as per requirement during installation connected with the system complete.

Supply, installation, testing and commissioning of VRF/VRV based Hi-wall type room/indoor unit (IDU) of nominal cooling capacity 1.0TR (358 cfm) to 1.25TR (417 cfm) having EER as per BEE standards and specifications with multiple speed evaporator fan with motor, copper tube aluminium fin evaporator coil, washable air filter, insulated drain tray, in built drain pump, expansion device, cordless remote control with necessary controls and electrical terminal to receive power supply, etc. IDU shall have anti-corrosive coating suitable for coastal area. Unit shall be of decorative slim dimension suitable indoor wall mounting. The indoor unit shall also have an electronic control console. The unit shall be suitable for wall mounting and provided with suitable mounting brackets with any additional refrigerant and oil charge as per requirement during installation complete

Supply, installation, testing and commissioning of VRF/VRV based Hi-wall type indoor unit (IDU) of nominal cooling capacity 1.3TR (421 cfm) to 1.7TR (586 cfm) having EER as per BEE standards and specifications with multiple speed evaporator fan with motor, copper tube aluminium fin evaporator coil, washable air filter, insulated drain tray, expansion device, cordless remote control with necessary controls, with 3-core copper flexible cord of required length and electrical terminal to receive power supply, etc. IDU shall have anti-corrosive coating suitable for coastal area. Unit shall be suitable for indoor wall mounting, having an electronic control console, provided with suitable mounting brackets with any additional refrigerant and oil charge as per the requirement during installation, connected to the system complete.

Supply, installation, testing and commissioning of VRF/VRV based Hi-wall type indoor unit (IDU) of nominal cooling capacity 1.8TR (594 cfm) to 2.2TR (655 cfm) having EER as per BEE standards and specifications with multiple speed evaporator fan with motor, copper tube aluminium fin evaporator coil, washable air filter, insulated drain tray, expansion device, cordless remote control with necessary controls, with 3-core copper flexible cord of required length and electrical terminal to receive power supply, etc. IDU shall have anti-corrosive coating suitable for coastal area. Unit shall be suitable for indoor wall mounting, having an electronic control console, provided with suitable mounting brackets with any additional refrigerant and oil charge as per the requirement during installation, connected to the system complete.

Supplying and installation of high pressure grade required size copper connection Y or T- Joints / refnet for liquid and suction line complete erected on wall/ceiling with supports/raceways, Nitrile rubber insulation, painting etc. with brazing and testing for leakages confirming the normal operation of the VRV / VRF air conditioning system.

Supply, installation, testing and commissioning of Computer controlled network system for monitoring & controlling all indoor & outdoor units, central point including all software & cabling (I-manager) / I. Touch central controller.

Supplying, laying / fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 34.9 mm dia (OD) for liquid line / suction line supply and return piping of suitable gauge ( hard drawn copper pipe for liquid main line and for refrigerant ) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19 mm thick elastomeric nitrile rubber along with application of multicoating suitable for use with VRV / VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra violet radiations complete with OEM standards of VRV / VRF air conditioning system.

Supplying, laying / fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 28.6 mm dia (OD) for liquid line / suction line supply and return piping of suitable gauge ( hard drawn copper pipe for liquid main line and for refrigerant ) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19 mm thick elastomeric nitrile rubber along with application of multicoating suitable for use with VRV / VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra violet radiations complete with OEM standards of VRV / VRF air conditioning system.

Supplying, laying / fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 22.2 mm dia (OD) for liquid line / suction line supply and return piping of suitable gauge ( hard drawn copper pipe for liquid main line and for refrigerant ) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19 mm thick elastomeric nitrile rubber along with application of multicoating suitable for use with VRV / VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra violet radiations complete with OEM standards of VRV / VRF air conditioning system.

Supplying, laying / fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 19.1 mmBNdia (OD) for liquid line / suction line supply and returnNpiping of suitable gauge ( hard drawn copper pipe for liquid main line and for refrigerant ) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19 mm thick elastomeric nitrile rubber along with application of multicoating suitable for use with VRV / VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra violet radiations complete with OEM standards of VRV / VRF air conditioning system.

Supplying, laying / fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 15.9 mm dia (OD) for liquid line / suction line supply and return piping of suitable gauge ( hard drawn copper pipe for liquid main line and for refrigerant ) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19 mm thick elastomeric nitrile rubber along with application of multicoating suitable for use with VRV / VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra violet radiations complete with OEM standards of VRV / VRF air conditioning system.

Supplying, laying / fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 12.7 mm dia (OD) for liquid line / suction line supply and return piping of suitable gauge ( hard drawn copper pipe for liquid main line and for refrigerant ) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19 mm thick elastomeric nitrile rubber along with application of multicoating suitable for use with VRV / VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra violet radiations complete with OEM standards of VRV /VRF air conditioning system.

Supplying, laying / fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 9.5 mm dia (OD) for liquid line / suction line supply and return piping of suitable gauge ( hard drawn copper pipe for liquid main line and for refrigerant ) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19 mm thick elastomeric nitrile rubber along with application of multicoating suitable for use with VRV /VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra violet radiations complete with OEM standards of VRV / VRF air conditioning system.

Supplying, laying / fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 6.4 mm dia (OD) for liquid line / suction line supply and return piping of suitable gauge ( hard drawn copper pipe for liquid main line and for refrigerant ) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19 mm thick elastomeric nitrile rubber along with application of multicoating suitable for use with VRV / VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra violet radiations complete with OEM standards of VRV /VRF air conditioning system

Supplying and laying HMS PVC conduit FRLS grade 25 mm dia with necessary accessories in RCC work/false ceiling/false flooring as per specification No. WG-MA/CC.

Supplying and erecting HMS PVC conduit FRLS grade 32 mm dia. with necessary accessories in wall/floor with chiselling appropriately as per specification No: WG-MA/CC.

Supplying and erecting elastomeric nitrile rubber / foam tube type sleeves for coating and insulating on provided PC / copper pipes having 9 mm thickness and inner diameter / sizes 28 mm for solar water heater/AC system.

Supplying and erecting elastomeric nitrile rubber / foam tube type sleeves for coating and insulating on provided PC / copper pipes having 9 mm thickness and inner diameter / sizes 42 mm for solar water heater/AC system.

Supply, Fabrication, installation and testing of sheet metal ducts In accordance with the approved shop dwgs and as required by the SpecificationFor Ducts with External SP upto 250 Pa (ESP upto 25 mmWG) 1 - 500 mm 26 C & S Connector Nill

Supply, Fabrication, installation and testing of sheet metal ducts In accordance with the approved shop dwgs and as required by the SpecificationFor Ducts with External SP upto 250 Pa (ESP upto 25 mmWG) 501 - 750 mm 26 C & S Connector Nill

Supply, Fabrication, installation and testing of sheet metal ducts In accordance with the approved shop dwgs and as required by the SpecificationFor Ducts with External SP upto 250 Pa (ESP upto 25 mmWG) 751 - 900 mm 26 TDF Flange Nill

Supply, Fabrication, installation and testing of sheet metal ducts In accordance with the approved shop dwgs and as required by the SpecificationFor Ducts with External SP upto 250 Pa (ESP upto 25 mmWG) 901 - 1200 mm 24 TDF Flange Nill

Supply, Fabrication, installation and testing of sheet metal ducts In accordance with the approved shop dwgs and as required by the SpecificationFor Ducts with External SP upto 250 Pa (ESP upto 25 mmWG) 1201 - 1500 mm 22 TDF Flange Nill

Supply, Fabrication, installation and testing of sheet metal ducts In accordance with the approved shop dwgs and as required by the SpecificationFor Ducts with External SP upto 250 Pa (ESP upto 25 mmWG) 1501 - 1800 mm 22 TDF Flange JTR or ZEE BAR

Supply, Fabrication, installation and testing of sheet metal ducts In accordance with the approved shop dwgs and as required by the SpecificationFor Ducts with External SP upto 250 Pa (ESP upto 25 mmWG) 1801 - 2100 mm 20 TDF Flange JTR or ZEE BAR

Supply, Fabrication, installation and testing of sheet metal ducts In accordance with the approved shop dwgs and as required by the SpecificationFor Ducts with External SP upto 250 Pa (ESP upto 25 mmWG) 2101- above 18 TDF Flange JTR or ZEE BAR

Supply, fabrication, installation an testing of flexible canvass connections constructed between ductable unit / dampers / ducting of required size with fire resist flexible double canvas sleeve complete.

Providing and applying of accoustic insulation for air ducts with 25 mm thick, 48kg/cu.m fiber glass faced with RP tissue and covered with 26 SWG perforatedaluminium sheets complete.

Providing adhesive thermal insulation for supply / return air duct with 19 mm nitrile rubber insulation having R-value as per the prevailing provisions in ECBC- 2007.

Supply,Installation, testing andcommissioning of motorised combined smoke & fire damper UL 555-S listed complete with control panel,inter connecting wiring at locations shown in approved shop drawings and as per specificationssmoke & fire Damper

Supply,Installation, testing andcommissioning of motorised combined smoke & fire damper UL 555-S listed complete with control panel,inter connecting wiring at locations shown in approved shop drawings and as per specifications actuators

Supply,Installation, testing andcommissioning of motorised combined smoke & fire damper UL 555-S listed complete with control panel,inter connecting wiring at locations shown in approved shop drawings and as per specificationscontrol Panel & wiring

Supply,Installation, testing andcommissioning of motorised combined smoke & fire damper UL 555-S listed complete with control panel,inter connecting wiring at locations shown in approved shop drawings and as per specificationsFire Damper with fusible links

Supplying and erecting aluminium powder coated linear grill of suitable size for width length without collar dampers having matching colour with the existing false ceiling and suitable for deflection of 15/30/45°.

Supply, installation, testing and commissioning of manually operated, opposed blade, duct mounted, flanged volume control dampers of required sizes in GI construction complete with operating mechanism, mounting arrangement, rubber refrigerant kits etc. complete.

Supplying and installing of coller damper of galvanised iron material of upto 120 microns for anti corrosive resistance for supply air grill of required size

Supplying & erecting tile type modular diffuser made from aluminium sheet with powder coated matching to the ceiling shade for provided supply and return air complete.

Fresh air louvers with Bird Screen :Supply, installation, testing and commissioning of alumininum powder coated fresh air louver for TFA units with bird screen as per the approved drawings and specifications.

Supply, installation and testing of under deck Insulation with 75mm thick extruded polystyerene of density 48kg / m3 and along with all ancillary work as detailed in the specification. Installation of the insulation shall be done by the HVAC contractor in co-ordination with the water-proofing contractor.

Supply, Installation, Testing & Commissioning of Ducted Circular Inline Ceiling Supsended Exhaust air fans with Bird Screen, weather proof canopy, Cowl piece and Gravity Louvers etc. (The price shall include the Rain protection, single/three phase and high effciency motor, capacitor etc. required accessories).1000 CFM, Static Pressure: 15 mm of w.g.

Supply, Installation, Testing & Commissioning of Ducted Circular Inline Ceiling Supsended Exhaust air fans with Bird Screen, weather proof canopy, Cowl piece and Gravity Louvers etc. (The price shall include the Rain protection, single/three phase and high effciency motor, capacitor etc. required accessories).450 CFM, Static Pressure: 15 mm of w.g.

Supplying, installing, testing and commissioning of smoke spill axial fans as per specifications. Fan shall be direct driven tube /vane axial fan. Fan motor and casing shall be suitable for smoke exhaust application and shall be thermally rated for 300°C for 2 hours as per [BS EN 12101- 3:2002]. Motors shall be suitable for 415+10% volts, 50 cycles, 3 phase AC supply. Fan static pressure shall be as indicated. Fans shall be activated from fire signal from fire alarm system. Fan shall be with fire proof flexible connection at inlet and outlet Fan Tag Space Fed CFM SP Motor KW (mmwg) EF-B1-01 TO 04 BASEMENT 11000 50 3.7

Supply, installation, testing and commissioning of AMCA rated JET THRUST / IMPULSE FAN with 100% thrust facility in forward and reverse direction. Complete Fan including and each components shall be fire rated as per IEC standards and designed to with stand 300° C temperatures for 2 hour in the event of fire. Fan motor shall be two speed 4P/6P , high efficiency and low noise design to meet NR 55.Sound levels @ 1m from fan shall not exceed levels of 72/57 dba. Each fan shall be of octogonal/circular design with impeller not more than 350 mm in dia and with a thrust not less than 50 NM to cover an area of apprx 300 sqm. Fan casings and outside sheet for fan housing and silencers manufactured from pre-galvanised sheet.Fan and its standard isolator to fully meet the F300 time/ temperature classifications of EN 12101-3 (300°C for 120 minutes). Test Certificates to be produced prior to delivery of the units. The fan shall incorporate factory mounted silencers at the inlet and the outlet alongwith all accessories like mounting brackets etc., Silencers to be with integrated inlet cones and guide vanes to straighten air flow. Sound attenuating material to be non-flammable in accordance with NFPA/DIN 4102 and as per EU guide line.Steel (powder coated) Protection guards to be provided at inlet and outlet for each fan.Each Fan to have a pre-wired terminal box with starters, contactors, relays and auto changeover from low speed to high speed with dahlander connection ( tapped winding). It shall be amnufactured to resist high tempertures in the event of emergency box to have easy access for services. The fan module to be removable for easy Maintaiance. Jet fan with dual speed motor

Supply, installation, testing and commissioning of Computational Fluid Dynamics CFD Analysis and simulation to ensure proper placement of fans to comply with the air movement, ACPH, exposure levels/time of CO to persons and applicable building regulations. CFD analysis to include complete preparation and simulation study of 3D modellling, intake and extract openings available for ventilation. The scope shall cover complete basement and the contractor shall submit a complete CFD report with data sheets, graphs for review and approval of Client and Consultant. The Agency scope is to work on the coordination drawings and produce the results, any comments to be incorporated and revisions made to getthe final CFD approved by Client / Consultant. Minimum 3 runs shall be included. CD containing visual output shall be submitted.

Supply and installation of CO Sensor & Detector UL 2034 /NFPA CO detector to be installed flush mounted hard wired to Panels and with battery back up. Each Sensor shall have Output Terminals: (Screw Type) 1. 24 V AC/DC 2. Power grounding 3. O/P 1 Linear signal CO transmitter 4. O/P 2 Linear signal CO2 transmitter (Built in option) 5. O/P 3 – Gas alarm (NC) 6. Jumpers to choose between open or 10V signal; voltage or current outputs 7. Jumper for configuring the linear output 0% or 20 % start point. 8. UART port Sensor Electrical/Mechanical/Dimensions: Power Input 24 VAC/VDC±20%, 50 Hz (half-wave rectifier input);Power Consumption < 3 Watts average; Wiring Connections max 1.5 mm2 wires for screw terminal (main terminal) and spring loaded terminal; UART connector 5-pin, 2.54 mm pitch & slide connectorCO Measurement : Operating Principle Gas sensitive thick film material (MMOS) internally compensated for temperature and humidity variations, with active carbon filter with Automatic Baseline Correction (ABC) 3 Accuracy 4± 10 ppm: Measurement ranges 0 to 200 ppm General Performance : Compliance with EMC directive 89/336/EEC; Operating Temperature Range 78oC to +50°C;Storage Temperature Range -20 to +70 °C; Operating Humidity Range 0 to 95% RH (non-condensing); Warm-up Time ≤ 15 minutes (more when un-powered for a long time); Step response (T1/e) 8 minutes 2; Expected Life Time - 7 to 10 years Self Diagnostics complete function check of the sensor.

Supply, Installation, Testing and Commissioning of Programmable Logic controller as per the below description and the Tender technical specs: Supply, Installation, Testing and Commissioning of PLC with main componentslike power, processor, input & output cards, an open protocol for interface with the BMS systems. PLC to be complete as per specs installed inside the Main Switchgear MCC panel,Starters for axial Fans& all accessorries. The PLC shall have a FULL MODBus / BACnet / Eithernet interface facility with the Central BMS system. Scope to include the Gateway or converter, Communication module, HVAC software in addition to the standard features.Minimum Specifications of a Controller are as follows : a) 10 x analogue inputs for CO or other pollutant sensors. (0-20mA, 0-5V and 0-10V input available). b) 16 x digital inputs for fan run/fault status. c) 1 x emergency alarm (i.e. fire) digital signal inputs. d) MODBUS, BACnet and other protocols for supervisory connection with BMS system. Built-in communication - Modbus slave serial link by means of connection on integrated RJ45 port (Modbus master/slave serial link on integrated RJ45 port). e) 3 x analogue outputs available to speed control groups of JetVent Fans, central car park exhaust fan or supply fan. f) 3 x digital outputs to drive speed control relays (for 2 speed fans) or other systems according to pollutant concentration. Other Standard Details which the Basic Controller shall have are as follows: a) Programmable Logic Controller with HVAC software b) Dedicated PWM programmable output. c) Programmable Anagol Outputs/Inputs 0 - 10 V, 0 - 20 mA, 4 - 20 Ma d) Display block for displaying the controller status: 4 LEDs (PWR, RUN, ERR and EXP) and 1 LED that can be used in the application. e) Connector for a removable terminal block (1) (2 terminals) for connecting the 24 V c/a supply. f) Rj11 Connector marked prog. Port for connecting a programming port. g) Connector for a removable terminal block for connecting analog inputs.h) Connector for a removable terminal block for connecting discrete inputs. i) Connector for a removable terminal block for connecting discrete inputs j) Rj45 connector for connection to the modbus bus k) Rj45 connector for connection to the modbus bus l) Five Modbus bus and expansion bus polarization and line terminato adjustment switches. m) connector for a removable terminal block for connecting the expansion bus. n) Connector for a removable terminal block to connect the power supply for a remote display unit. o) Connector for a removable terminal block, for connecting 4 discrete relay N/C outputs. p) Connector for a removable terminal block for connecting the discrete relay C/O output. g) Display with 6 command for setting the controller parameters. r) logic controller are mounted as standard on a 35mm DIN rail. Supply, laying testing and commissioning of 600/1000V copper conductor FRLS insulated PVC sheathed armoured IEC 60502 with max short circuit temperature 300C.

Supplying, erecting & terminating PVC armoured cable 3 core 2.5 sq mm copper conductor continuous 5.48 sq mm (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Supply & Installation of shieled armoured Communication/Control cable between VRF IDU & ODU s: 1.5 Sqmm 2.0 Core

Supply & Installation of Copper flexible power cable for each VRF IDU: 2.5 Sqmm 4.0 Core

Supplying, erecting & terminating XLPE armoured cable 4 core 10 sq. mm. copper conductor continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Supplying, erecting & terminating XLPE armoured cable 4 core 6 sq. mm. copper conductor continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 4 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Supplying, erecting & commissioning 4 pole RCCB 16/25A, electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification no. SW-RCCB/RCCB

Supplying, erecting & commissioning 4 pole RCCB 40A, electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification no. SW-RCCB/RCCB

Supplying, erecting & commissioning 4 pole RCCB 63A, electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification no. SW-RCCB/RCCB

Supplying and erecting SS enclosure for MCCB suitable for up to 100A MCCB.

Supplying & erecting triple pole and neutral distribution board (TPNDB), 3 pole/4 pole MCCB as incomer & outgoing SP MCB (36 poles) or TP MCB of 12 ways (36 poles), with door, 1.2mm thickness, surface/flush mounted, on iron/GI frame (vertical busbar type) as per specification no. SW-SWR/MCBDB1

Supplying, erecting & marking TPMCB 6A to 32A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB

Supplying, erecting & marking TPMCB 40A to 63A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB

Providing & erecting 4 Pole MCCB, 415V, 200A, rated short-circuit breaking capacity 25 kA (Ics=100% of Icu), adjustable thermal (overload) setting and adjustable magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact and MCCB should have phase barriers both sides, with insulation withstand capacity 800V, no line-load bias in provided enclosure/panel as per specification no. SW-SWR/MCCB

Harsh Constructions Pvt Ltd

K H CONSTRUCTION