SPL REPAIRS TO THE ROOF AND FALSE CEILING OF BLDG NO P-24 and P-38 AT INHS KASTURI AND ADDN ALTN AND SPL REPAIRS TO CHAIN LINK FENCING OF VISWAKARMA GROUND (P-158) AT INS SHIVAJI, LONAVLA

Amount

Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings including valley gutter etc

Dismantling of Mangalore pattern roofing tiles with ceiling tiles or slate roofing

Dismantling of battens for tiles, shingles etc of any size including tilting fillets spacers exc 15 cms

Dismantling framed work of timber scantling under 40 sq. cm in section in fillets, rails, posts, rafters, purlins etc all as specified and as directed

Dismantling boarding, any description, fixed any position with nails

M&L Roof tiles, Mangalore pattern,interlocking at side joints, laid dry®

All as per iem no6 above but fixing only rof tiles obtained from dismantling

M& for Ridge or hip tiles to suit Mangalore pattern of roofing tiles, bedded and jointed in lime mortar 1:3 or cement mortar 1:6 using class AA Tiles

All as per item No 8 above but fixing only ridge or hip tiles obtained from dismantling.

Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps;Flats,hold fasts; wall ties; hooks for hanging fans; plain angle cleats E32for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165

S&F Mild steel screw bolts 16 to 20mm dia of neck (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long

S &F 0.50 mm thick Plain, galvalume l sheeting, in boarding , hips, , drip and straight flashings (length and girth as fixed) any colour having tensile strengh 550 Mpa fixed with self tappin scews complete as specified and directed

S&F 0.63mm thick corrugated galvanised mild steel sheeting with zinc coating of 120 gram/SqM, grade 'O' with two corrugation side lap, with corrugation of grade 'B' 12.5mm depth fixed with 'L' type or 'J' type , cranked hook bolts or suitable self taping screw and washers in roofs, walls etc.

All as per iem no 13 above but fixing only old CGI sheets from dismantling

S&F 1.00 mm thick plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings(length and girth as fixed) with zinc coating 120 gram/SqM grade 'O'. Note :- Plain area will be measured for payments irrespective of curve/valley

Dismantling timber scantlings 40 sqcm and over in section, in unframed work any position.

M&L for second class hard -wood clean sawn timber framed as in scantling

Taking down (dismentling) wall and ceiling boards(fibre, pulp, insulation, etc) or insulation boards/slab/blankets, any thickness, including cover fillets complete all as specified and as directed.

S & F for 4 mm thick of size 600x600mm white coloured HSPC (high pressure Steam Cured) pre-primetered self embossed, textured designer board E-Board Classic to be fixed aluminium grid/section size 600mmx600mm with main runner 38x24x0.9mm thick ,cross tee 28.6x24x0.9 mm and wall angle 19x19xo.9 mm duly suspended with 2mm dia GI bar hangers 1200mm centre to centre both ways fixed with steel dash fasteners or from purlin from the roof with alignment clip including providing provisions for light fixtures of any size complete all as specified.

Fixing only for 4 mm thick of size 600x600mm white coloured HSPC (high pressure Steam Cured) pre-primetered self embossed, textured designer board E-Board Classic to be fixed aluminium grid/section complete all as specified.

M/L 2nd class hard wood battens sectional area exc 5 sqcm and n.exc 15 sqcm clean sawn @ 30cm spacing all as directed.

M&L 2nd class hard wood scantlings square or rectangular in section Exc 13 & N.exc 25 Sqcm clean sawn of size 50mmx50 mm used as rafter and purlin and fixed to CGI Sheet with selftapping screws all as directed.

M&L cement filleting in CM 1:4 in roof sectional area n.exc 25 sqm in repair.

S/F Tubular sections of size 50 x 25 x 2.6mm thick as in rafters fixed with self tapping screw of size not less than 75mm and 25 x 25 x 2 mm thick for battens fixed on rafter over CGI sheet roof with necessary fittings and welding for supporting mangalore pattern roof tiles complete.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.

M&L 15mm thick rendering on fair faces of brick work or concrete surface in cement mortar (1:4) with WPC finished even and smooth without using extra cementon external surfaces.

M&L for Rendering 15 mm thick CM 1:6 on fair faces of brick work or concrete surfaces and to be finished even and smooth(without using extra lime or cement)

M&L for Rendering 10 mm thick CM 1:3 on ceiling and to be finished even and smooth(without using extra lime or cement)

Supply only integral water proofing compound (ISI marked).

M&L 2 Coat of OBD over primer over 2mm th wall care putty on newly plastered wall surface including preparation and all as specified and directed

M&L for preparation of plastered or unplastered old decorated surfaces of ceiling and applying two coats of white wash complete all as specified and directed

Demolition of Brickwork or stone/ boulder masonry, built in cement mortor including all quoins, arches, pillars, etc, but excluding ashlarfacings, dressed stonework and precast concrete articles

Demolition of cement concrete(unreinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level)

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6

M&L for Coloured Non Skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 20 mm thick screed bed in CM 1:6

M&l for Glazed ceramic tiles of any colour in vertical surfaces 350 x 250x 7 mm/ 450 x 350 x 7 to 9 mm thick mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick backing coat cement plaster in CM 1:4

Taking down chowkats or frames .exc 1.5 Sqm bt nexc 4 sqm each with shutter (without taking of shutter from the frame.

S&F aluminium powder coated single/double leaf partly glazed and partly panneled door in two panels having 12 mm thick MDF board both side laminated as bottom panell & 5 mm thick toughened glass on top panells on pivots along with hidroulic door closer, door lock, handle and other necessary builders hardware, glass fixed with rubber beading and glazing clips , MS clamp and using following powder coated aluminium section as given in "JINDAL" catalouge complete all as specified & as directed (a) Rectanguller tube -14005 (b) Shutter vertical - 19550, (c) Shutter Top rail -19563, (d) Shutter middle rail - 19525, (e) Shutter Bottom rail - 19563, (f) Glazing clips - 19352, (g) Handle - 18566

M&L for100 mm thick PCC (1:4:8) type D-2 using 40 mm graded stone aggregate as in sub base of floor as specified and directed.

M&L for 50 mm Cement concrete type B-1 ,1:2:4 (20mm graded aggregate) as in floor

Taking down 15mm dia bore GI steel tubing and connection including cleaning

S&F CPVC pipes, SDR 11, 20mm outer dia conforming to IS 15778 with all fittings such as Tee, bends, elbows, unions sockets and end pieces etc to receive the fittings and fixed with solvent on walls/ceiling or laying in floors complete

S&Fin repair Bib taps 15 mm dia, fancy type chromium plated screwed down, screwed for iron pipe or for brass ferrule and fixed for 15 mm dia pipe fixed in repairs Make Cera – Cat No. F2006151 or Equivalent

S&Fin repair Pillar taps 15 mm dia, cast copper alloy, with capstan heads, fancy type chromium plated ,screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed in repairs Make Cera – Cat No. F2006101 or Equivalent

S&Fin repair Stop valves 15 mm dia, fancy type chromium plated, screwed down, high pressure, screwed both ends for 15mm dia pipe or for unions fixed in repairs

S & F 75mm dia, PVC (SWR) pipe,in any length iwith rubber ring jointing with solvent cement complete all as specified and as directed.

S&F PVC (SWR) pipes of dia 110mm bore single socketed in any length with rubber ring joints fixed to walls.

Taking down chowkats or frames N.exc 1.5 Sqm with shutter (without taking of shutter from the frame.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing

Factory made solid panel pvc door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S&F 100mm butt hinges, stainless steel medium weight fixed with stainless steel screws.

S&F aluminium handles cast type anodised 150mm size.

S&F aluminium anodised barrel tower bolts of extruded section and fixed 250 mm size.

S&F Collapsible steel gates, top hung consisting of channel pickets, pivoted flat bars, top and bottom runners, guides, handles etc., as specified, erected in position and securing runners with holdfasts and brackets, complete

S&F in repairs PVC (SWR) 75mm dia floor trap, plain with grating includingj ointing with solvent cement

M&L for preparation of old painted wood surfaces of any description having width/girth execeeding 10cm and apply one coat of synthetic enamel paint complete all as specified and as directed.

M&L for Preparing old steel surface any description and applying one coat of synthetic enamel paint

M&L for preparation of old plastered surfaces of walls, pillars, cornices etc by brooming down with steel wire burshing, scraping down smoke shoot, moulds, moss and efflorescent salts and trading oil and greasy spots apply putty for fill holes and undulations and applying 2 Coat of OBD on the walls, pillars, cornices etc complete all as specified and directed.

M&L for complete removal of existing treatment of old painted wall surfaces and applying two coats of exterior grade weather resistant, antifungal acrylic latex paint on walls over a coat of primer complete all as specified and as directed.

Preparing surfaces of wood and wood based materials, new or old, of any description and girth, not otherwise described and treated with creosote oil

Preparing new steel Surfaces of any des-cription, over 10cm in width or grith, not otherwise described and applying two coats of Synthetic enamel paint over a coat of red oxide

Demolition of Brickwork or stoneboulder masonry, built in Cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles

Dismantling steel work including doors, gates posts etc.

Dismantling wrought iron or mild steelwork of any description not otherwise provided for

Excavating in post holes (or similar holes) each n. exc 0.5 cum getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n. exc 50m and making good surface in hard dense soil

Excavation in trenches n.exc 1.5m wide n.exc 1.5m deep for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n.exc 10 Sqm on plan and n.exc 1.5m depth and getting out in hard dense soil

M&L for providing cement concrete type C-2, 1:3:6 (using 40mm graded crushed stone aggregate) as in foundation, bed blocks,filling and mass concrete

M&L for PCC 1:4:8 type D2 using 40mm graded stone aggregate as in foundation filling and mass concrete.

M&L for Brickwork with Modular bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 in narrow widths including Cutting out bricks/stone, forming toothing for, and bonding new into old brickwork /stone masonry

M&L rendering 15mm thick in CM (1:4) on both faces of brick/concrete surfaces finished even and smooth without using extra cement complete

S & F mild steel work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 290 Gde E-165

S&Fmild steel Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc, complete drilled for fixing of steel sheeting or other covering, doors,f etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel, sheeting or other covering, running rails and guides) and hanging also fastening and fixing complete Fe-290 (gde E-165).

Supply only chain link fencing, MS galvanised of any size and type complete all as specified and as directed by Engr in Charge.

Fixing only chain lnk fencing including line wires, any mesh, size, any type of standards, rails, straining bolts, etc including provision of binding wire complete all as specified and as directed Note : chain link fencing shall be measured and paid separately as " supply only"

S&F Mild steel round bars/TMT bars 10mm dia , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete

Preparing new or previously untreated steel surface of any description, over 10 cm in width or girth not other wise described and appying two coats of synthetic enamel paint over red oxide primer.

M&L for Preparation of Old steel surface of steel and applying two coats of synthetic enamel paint over a coat of red oxide primer

S&F fixed 5 to 10 mm dia Mild steel screws bolts(Machine made)with hexagonal or square heads at one end and screwed both ends ,each screwed end to be fitted with washers and one hexagonal or squre nut, lentg of bolt exc 5cm and n.exc 10cm long. With washers.

M&L for filleting in any position and to any shape in cement mortar 1:4 including all mitres, stops etc section of fillet exc 25 but n.exc 50 Sqcm

S&F steel work in Tubular trusses, vertical post connecting to plates, including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1998 grade St-240 complete

S&F Rolled mild steel section in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc quality conforming to Fe 410-W (Gde E250) quality-A.

S&F MS plate 6mm thick (Plain or chequred) ,channels, and counter sank forming holes, with out any attachment FE-410-W (Code E - 250) Quality - B

Pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tags pping screws/ L-type or J-type or cranked hook bolts complete as specified.

S&F Pre painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall/valley gutter, fixed with self tapping screws/ L-type or J-type or cranked hook bolts complete as specified.

S&F wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 290 Gde E-165

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm.

Removing excavated material exc. 50m and n exc 250m, depositing where directed at a level n exc. 1.5m above the starting point

M&L for Concrete bed to drain pipes including forming cradles in PCC (1:4:8) type D2 (using 40 mm gradded stone aggregate) for 150 mm dia pipe complete all as specified and as directed

S&F Reinforced concrete pipes, class NP2, laid and jointed complete with collars 150 mm dia laid in trenches and jointed as specified

PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors/walls 110 mm bore

Surface excavation n.exc(not exceeding) 30 cmdeep and averaging 15cmdeep and getting out hard dense soil.

M & L for hardcore of gauge n exc 63 deposited, spread and levelled in layers n exc 15 cm thick watered and rammed to a true surface

M&L cement concrete 1;4:8 type D2 (40mm aggregate) 75 mm thick as in sub base

M&L for coloured chequered cement concrete tiles 20cmx20cmx20mm thick set joined with grey cemnt and pigment to match the shade of tile over and inclding 20mm thick screed bed in CM 1:6 all as specified and as directed.

M&L PCC 1:2:4 type B1 using 20mm graded stone aggregate as in coping including watering slightly rounded, including necessary form work.

seema enterprises

M/s S.D Construction Co

Mehta Construction Co.