Construction of Health Sub Center MAHULIYA in Vill MAHULIYA, GP MAHULIYA, Block PATAN, District PALAMU under Zila Parishad, Palamu.

Eartwork in excavation in foundation trenches in hard soil (vide classification of soil item-A) and disposal of excavation earth as obtained to a distace up to 50m including all lifts levlling ramming the foundation trenches removing roots trees surbs all complete as per approved designed Building specification and direction of E/I

Extra for earthwork in hard soil as per specification and direction of E/I.

filling in Foundation trenches and plinth in layers not exceeding 150mm thick well watered , rammed , fully fully compacted and fine dressed with earth obtained from excavation of foiundation trenches within a lead of 50M and lifts of 1.5m all complete as per building specification and direction of E/I.

Proving coarse clean sand in fillig in foundation trenches or in plinth includding ramming and watering in layes not exceeding 150mm thickwith all leads and lifts including cost of all materials, labours, royalty and taxes all complete as per approved designed Building specification and direction of E/I ( mode of Measurement of compacted volume).

Providing designation 75B one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/I.

1:4:8 (1 cement :4 Coarse sand ( zone-III ) :8 grade stone aggregate 40mm nominal size )

Providing and laying in position specified grade of reinforcement cement concrete of excluding the cost of centring and shuttering, finishing and reinforcement - all work upto plinth level 1:1.5:3 (1 cement :1.5 Coarse sand ( zone-III ) : 3 grade stone aggregate 20mm nominal size )

Reinforcement cement concrete work in walls (any thickness), including attached pilasters, buttersses, plinth and string cource, filleets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 Cement : 1.5 Coarce sand (zone-III) : 3 Graded stone aggregate 20 mm nominal size)

Reinforcement cement concrete work in beams, suspended floors, roofs having slope up to 15 degree landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircase and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 Cement : 1.5 Coarce sand (zone-III) : 3 Graded stone aggregate 20 mm nominal size)

Providing Tor steel reinforcement as per approved design and drawing including carriage of Rods (straight or in coils) to work site, cutting, bending and binding with annealed wire with cost of wire, removal of rust, placing the rods in position complete as per building specification and direction of E/I. TMT-500 8mm dia

TMT-500 10mm dia

TMT-500 12 to 20 mm dia

Foundations, footings, bases of columns, etc. for mass concrete

Columns, Pillars, Piers, Abutments, Posts and Struts

Lintels, beams, plinth beams, girders, bressumers and cantilevers

Wall ( any thickness) including attached pilesters, butteresses, plinth and string courses etc.

Suspended floors, roofs, landings, balconies and access platform

Providing designation 75B brick work in C.M. (1:6) in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10 mm thick mortar joints, cost of screening materials, raking out joints to 15 mm depth curing, taxes and royalty all complete as per building specication and direction of E/I.

Providing designation 100A brick work with fly ash lime brick (FLAG) confirming to IS 12894-1990 (9"x4.5"x3") in C.M (1:6) in superstructure with approved quality of clean coarse sand of F.M 2 to 2.5 including providing 10mm thick mortar joints , cost of screening materials, racking out joints to 15mm depth, curing taxes and royalty all complete as per specification and direction of E/I

Providing 112mm thick reinforced designation 100A brick work with fly ash lime brick (FLAG) confirming to IS 12894-1990 (9"x4.5"x3") in C.M (1:4) in superstructure with approved quality of clean coarse sand of F.M 2 to 2.5 including providing 10mm thick mortar joints , cost of screening materials, racking out joints to 15mm depth, curing taxes and royalty all complete as per specification and direction of E/I

Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry. sqm

Supplying, fitting and fixing 35mm thick solid core decorative single leaf flus door shutter with both decorative vannered with block board core bended with high quality phenol formal dehydes synthetic resin of standard make with aluminium fitting such as hings, tower bolts , handle , cleats and sand blocks taxes all complete as per building specification and direction of E/I

Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc.complete (50x20mm)

Providing and fixing bright finished brass 100 mm mortice latch and lock , Isi marked, with six lever and a pair of anodise ( anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade , with necessary screw etc. complete

Providing and fixing aluminium hanging floor door stoper, ISI marked, anodise ( anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade , with necessary screw etc. complete

Providing and fixing aluminium extrude section body tubular type universal hydraulic door closer ( having brand logo with ISI:3564 embossed on the body , door weight upto 36 kg to 80kg and door width from 701mm to 1000mm), with double speed adjustment with necessary screw etc. complete

Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Providing and fixing pressed steel door frames conforming to IS: 4351,manufactured from commercial mild steel sheet of 1.60 mm thickness,including hinges, jamb, lock jamb,bead and if required angle thresholdof mild steel angle of section 50x25 mm, or base ties of 1.60 mm,pressed mild steel welded or rigidly fixed together by mechanical means,including M.S. pressed butt hinges 2.5 mm thick with mortar grade,lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre treatment of the surface as directed by Engineer-in-charge: Profile- B Fixing with adjustable lugs with split end tail to each jamb

Supplying, fitting and fixing M.S. grill made of 20x6mm M.S. flats as per approved design and drawing, properly fabricated with joints continuous fillet welded and finished smooth, hoisting carriage of grill to work site, hoisting as per building specification and direction of E/I.

Supplying , fitting and fixing glass panes including supplying putty, beads and nails after taking out old and broken glas panes and disposal of debris all complete as per building specification and direction of E/I 5.5 mm, plain

providing and laying double charged verified floor tiles in different size ( thickness to be specified by the manufacturer ) with water absorption less than 0.08% and conforming to IS:15622/Iso 13006 of approved make in all colour and shades , laid on 20mm thick cement mortar 1:4 ( 1 cement : 4 coarse sand ) jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc. complete size of tiles 600 x600mm

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite stone slab colour black, Cherry/Ruby red. Area of slab Over 0.50 sqm

Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite work

Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.

Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement: 2 coarse sands: 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth. Granite Stone of approved shade

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete.

Providing and laying 25 mm thick kotah stone slab flooring of approved quality over 19mm thick base of lime mortar (1:1:1)(lime putty: surkhi: coarse sand) laid and jointed with white cement slurry flush pointed with white cement including rubbing , polishing and cost of curing taxes and royalty all complete as per building specification and direction of E/I 600 x600 mm thick

Providing single layer Naria tiles in roof including cost of all labour and materials, taxes, and royalty all complete as per building specification and direction of E/I

Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement: 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : In 75x75 mm deep chase

Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement: 2 coarse sands: 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 microns, finished with 12 mm cement plaster 1:3 (1 cement: 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.

Water proofing for old roof slab. Protection of treated surface with PCC: -The treated surface should be covered with 25mm/50mm PCC of M-20 grade (1:1.5:3) with proper slope (1:120) towards the rain outlets in alternate panels …..do……do…… all complete as per

Covering of treated surface with PCC: - Providing 25mm thick cement concrete M20 (1:1.5:3) maintaining slope in alternate 2mtx2mt panels with approved quality of stone chips of 20mm to 6mm size graded and cleaned sand of F.M. 2.5 to 3 including screening, shuttering and mixing cement concrete in mixer with admixture of integral water proofing and placing in position, striking curing, taxes and royalty all complete as per building specification and direction of E/l.

Providing and filling of groove between 25mm pcc panels with polyshiphide sealant (poring Grade ) as per drawing and technical specifications and dli-ection of E in charge ( with 1B% GST) Brand - Sika polysulphide Fosroc- hioflex 600 Dr. Fixit Pidiseal PS (42P), MYK Seal PS or Equivallent

Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying: (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.

Providing 12mm thick cement plaster (1:6) with clean coarse sand of F.M 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I

Providing 6 mm thick cement plaster (1:4) in ceiling with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scafolding taxes and royalty all complete as per buildings specification and direction of E/I.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections.

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.2 kg/10 Sqm

Providing two coats of oil bound distemper of approved shade and make over a primer coat of whiting, over new surface including preparing the plastered surface by rubbing smooth with pumice stone or fine sand paper applying putty where required scaffolding washing of floors all taxes all complete as per building specification and direction of E/l.

Providing two coats of synthetic enamel paint of approved shade and make over steel surface including cleaning the surface thoroughly specification and taxes all complete as per building specification and direction of E/l.

Finishing walls with Acrylic Smooth exterior local Art paint of required shade, new work (two or more coat applied over and including priming coat of exterior primer applied, as per E/I

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : Powder coated aluminium (minimum thickness of powder coating 50 micron)

For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron)

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement :3 coarse sand: 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand including finishing the top smooth

Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling fan clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick M.S. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ M.S. sheet box by means of 3.3 mm dia round headed screws, one lock at the corners. Clamp shall be made of 12 mm dia M.S. bar bent to shape as per standard drawing.

Providing 12mm thick cement plaster (1:3) with clean coarse sand of F.M 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I

Providing 1.5mm cement punning including curing, carriage of water with all leads and lifts as per building specification and direction of E/l.

Cost of Driling 200 mmx165mmx125 mtr.deep bore well in all kind of Soil and rock in rural area for instalation of pump set with Hydrolic DTH Rig machine all complete including all materials, tools,driling rig,air compressure and equipments as well as fule, lubricantsand cost of transportation of rig machine and other vehical up to Site. From 0.00 m to 50.0 m

From 51.0 m to 150 m

Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, ittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge. 200 mm nominal size dia

Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by "V" notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested inapproved laboratory, i/c disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge.

Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of:

Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete.

Supplying submersible pump sets confirming to lS 8034 and motor confirming to lS 9283. Pump shall be suitable for various Deliver head and discharge with stainless steel pump shaft and polypropylene/ noryl impeller. Motor suitable for working on 415V110%, 3PH, 50 Hz, A.C. supply with cable guard, thrust carbon/ fiber bearing to withstand entire hydraulic thrust, water proof winding shall be provided. The pump set shall be suitable for direct coupling. Pump shall have suitable outlet as per manufacturers design. Anti thrust stream lined non return valve shall be provided with pump. 3 meter submersible copper conductor cable in single/ double run shall be provided with each pump. Submersible Pump set 100 mm dia (with Polypropylene/ Noryl lmpeller) up to 20 stages 2.0 HP

Supply fitting and fixing of standered make starter pannel Board with arrangement of all necsssury protection including all taxes ,royalty etc all complete job as per direction of E/I.

Supplying fitting and fixing 3 crore 4 sqmm Flat copper submersible cable FINOLEX / HEVELS make including all taxes ,royalty etc all complete job as per direction of E/I.

Supplying fitting and fixing G.I Pipe 50mm Dia (TATA or equivalent Make) Medium Quality as per IS:1239(Part-01) 2004

Point Wiring in PVC Conduit, with Modular type Switch:- Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit, with modular type switch, modular plate, suitable size of GI box etc as required.(Group C) Group C

Wiring for light/power plug with 2x 4 sq.mm FR PVC insulated, copper conductor ,single core cable in and surface/recessed PVC conduitalong with 1 No. 4 sq mm FR PVC insulated copper conductor single core cable for loop earthing as requried .

Wiring for light/power plug with 2x4sq.mm FR PVC insulated copper conductor single core cable in surface / recessed PVC conduit alongwith 2 no. 4 sq mm FR PVC insulated copper conductor single core cable for looping earthing as required.

Wiring for circuit / sub main wiring alongwith earth wire with the following sizes of PVC insulated, copper conductor , single core cable in surface/ recessed PVC coduit as required. 2X1.5 sq mm+1X1.5 sq mm

2X2.5 sq mm+1X2.5 sq mm

4X 2.5 sq mm+2X 2.5 sq mm

4X 10 sq mm+2X 6 sq mm

Supplying & drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface recessed steel/PVC condult as required.

Supplying and fixing of following size of pvc conduit along with the accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required 20 mm dia

25mm dia

Supplying and fixing following modular type switch/ socket on the existing switch box/cover 5/6 amps, one way switch

15/16 amps, one way switch

5/6 amps 3 pin socket outlet

5/16 amps,6 pin socket outlet

TV antena Socket outlet

S/F Modular type stepped tube electronic fan regulator on the existing plate switch box including connection but excluding modular plate etc as required

S/F Modular blanking plate on the excluding modular plate & switch box excluding modular plate etc as required.

supplying and fixing following sizes/ modules,GI box alonwith modular base & cover plate for modular switches in recess etc as required 1 or 2 module (78mm x 78mm x 45mm)-for telephone & tv outlet

4/5 module (78mm x 140mm x 50mm)

6 module (78mm x 205mm x 50mm)

S/F Ceiling Rose :-Supplying and fixing 2pin 5 amp ceiling rose on the existing junction box/wooden block including connection as required etc.

Supplying and fixing batten/ angle holder including connection etc. as required.

Supplying and fixing ding dong sound call bell single phase, 230 volts complete as required.

ITC Ceiling Fan :- Installation, testing and commissioning of ceiling fan including wiring the down rods of standard length (Up to 30 cm) with 1.5 sq.mm FRPVC insulated copper conductor single core cable etc. as required

Installation of exhaust fan up 450mm sweep in the existing opening including making the hole to suit the size ,makin good connection ,testing,commencing etc,

Supplying and fixing 20 amps, 240 volts, SPN Industrial type, society outlet, with 2 pole and earth, metal enclosed plug top along with 20 emos 'C' curve , SP, MCB, in sheet stool enclosure, on surface or in receas with choined metal cover for the socket out let and complete with connections lesting and commessioning etc. as required.

S/F T.P. MCB DB:-Supplying and fixing following way three pole & neutral ,sheet steel, MCB distribution board, 440 volts, onsurface /recess, complete with tinned copper bus bar, neutral bus-bar, earthbar ,dinbar, interconnections, powder painted including earthing etc. as required. 8 Way (4+24) Double Doore Horizontal type

Supplying and fixing 6 Amp to 32 Amp rating 240 volts ,10 KA "C" Curve miniture circuit breaker suitable for inductive loads of following poles in the existing MCB DB complete with connections resting and comminising etc as required 6/32 Amp single pole

40 amp TPN

Supplying AND Fixing single pole blanking plate in the existing MCB DB complete etc. as required

Supplying AND Fixing of following rating double pole (single pole & neutral ).240 volts,resudual current circuit breaker (RCCB),having a sensivity current 30 miliampere in the existing MCB DB complete with connections,testing & comminissioning etc as required. 40 Amps

Earthing with G.I earth plate 600mm x 600mm x 6mm thick Including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. as required (but without charcoal or coke and salt)

Providing and fixing 25mmX 5mmX G.I strip on surface or in recess for connections etc. as required

Providing and fixing 6 SWG dia G.I wire on surface or in recess for loop earthing along with existing surface /recessed conduit /submain wiring /cable as required.

Supply of XLPE insulated PVC sheathed ,heavy duty ,armoured electrical cable with aluminium conductor for working voltage upto and including 1100volts.(conforming to IS-7098.(part-1)4 core ,16sq. Mm

Supplying and drawing of upto 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC Conduit as required 1 run of cable

Laying of one number PVC insulated and PVC sheated / XLP Power cable of 1.1KV grade of Size not exceeding 35 Sqmm direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC sheated / XLPE aluminium conductor cable of 1.1KV grade as required 4X16 Sq.mm (28mm)

S.I.T.C of following rating recess / surface mounted LED round/square shape down light luminaire with pressure die cast housing for single phase supply voltage luminaire shall be confirm IS : 10322 part-5/section 2 of IEC :62722 with all necessary accessories as required 15/16W LED round down light - as CL

18/20 W LED Round Down Light (Surface)

Bulk Head Fitting 9/10 Watt LED

S.I.T.C of following rating surface mounted LED tube light fitting suitable for 230v , 50Hz , single phase supply etc. complete as required - 20/22 W. LED tube light 10/12 W. LED tube light

20/22 W. LED tube light

S.I.T.C of 300mm (12") Exhaust fan (Metal body) suitable for 230V 50Hz, single phase AC supply Complete with Motor Usha/ Crompton havels

Supplying installation and commissiong of following size celling fan 3 blades confirming to IS : 374 : 2019 including wiring the down rods of standard length ( upto 30cm) with 1.5 sq.mm FR PVC insulated copper wire suitable for 230V , 50Hz, single phase supply etc. complete required - 1400mm (56") ceiling fan 1200 mm (48") BLDC Star Rating 32W Ceiling Fan

Supplying, fitting and fixing vitreous white glazed earthen ware I.W.C. of parry Hindustan or any other I.S.S. approved make with 100mm H.C.I. 'p' trap 15 litres C.I. pull and let go flushing cistern of names or other I.S.S equivalent make, complete with all fittings, C.I. or C.C. brackets 32mm alkathene/P.V.C. telescopic flush, pipe about 2 M long with one brass coupling and clamps G.I. chain and pull including supplying and fixed a pair of vitreous white glazed earthenware ware footrest to be fixed in floor 15mm C.I. body brass spindle stope cock of weight not less than 50grms, 15mm P.V.C. connection pipe 450 mm. long and the exposed pipe and cistern with two coats of approved paint over a coat of red oxide primer etc. all complete as per specification and direction of E/I. (B) 580mm Long © with 10Lit. low Level P.V.C Cistern

Supplying, fitting and fixing 40 mm high viterous white glazed earthen ware E.W.C. with "p" trap of Parry Hindustan or any other I.S.S. make including supplying & fixing 15 litres C.I. mosquito proof low down flushing cistern of approved make with complete fittings with C.I. handle and R.S. or bracket with telescopic flush pipe with brass coupling and plumbers joints spindle stop cock of approved quality weight not less than 450 grms. , 15 mm P.V.C. alkathene pipe 45 cm long with brass coupling at both ends and white/ black plastic solid state seal and lead of commander/ cuckoo or other I.S.S. make with hinges or screw etc. painting pipe and cistern etc. with 2 coats of approved paint over a coat of red oxide primer etc. all complete as per specification and direction of E/l.(b) with 10ltrlow level pvc cistern

Providing and fixing White Vitreous China Wash basin with C.I. rackets 15 mm C.P. brass pillar tap 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets , cutting and making good the walls wherever required White Vitreous China Wash basin 550 x400 mm with a pair of 15mmC.P brass pillar taps

supplying fitting and fixing the following items complete with all materials as per specification and direction of E/I.(a) glass shelf with c.p brass rails.(i)600x125 mm glass shelf complete

Providing and fixing PTMT Bottle Trap for Wash basin and sink.Bottle trap 31 mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 260 gms

Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms.

Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms.

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 15 mm nominal bore

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15 mm nominal bore

Providing and fixing toilet paper holder :C.P. brass

Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS 13592 Type A including jointin with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion 75mm diameter

110mm diameter

Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS 13592 Type A including jointin with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion Copular 110mm

single tee with door 110x110x110mm

bend 87.5º Shoe plain

Shoe plain

Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS 13592 Type A including jointin with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion 75mm diameter

110mm diameter

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c ing the pipe with clamps at 1.00 m spacing.This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.Concealed work, including cutting chases and making good the walls etc 20 mm nominal outer dia pipes

25 mm nominal outer dia pipes

32 mm nominal outer dia pipes

40 mm nominal outer dia pipes

50 mm nominal outer dia pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c ing the pipe with clamps at 1.00 m spacing.This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.Concealed work, including cutting chases and making good the walls etc 15 mm nominal outer dia pipes

20 mm nominal outer dia pipes

25 mm nominal outer dia pipes

50 mm nominal outer dia pipes

Providing and fixing in position 25 mm diameter mosquito proof coupling of approved municipal design.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Carrage of materials Cement 10Km

Sand 10Km

Stone Chips 24Km

Bricks 15Km

LABOUR CESS @ 1%

Please Enable Macros to View BoQ information