SPL REP OF ROOF SHEET REPLACE AND FALSE CEILING REPLACE AT JCOs AND ORs MD ACCN AND SECURITY LIGHTS ALONGSIDE BOUNDARY WALL, PROVN OF DRAINAGE SYSTEM APPROX 100MTRS WITH SOAKAGE PIT AND PROVN OF SEPTIC TANK NEAR BLDG NO T 61 AT OTHER THAN BASISTA UN

Amount

Dismantling Plain or corrugated steel sheeting,any gauge, thickness, including Nainital or similar pattern roof coverings, complete all as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified

Dismantling unframed timber scantlings as in fillets, rails, rafters,purlins, etc.over 40 sq. cm and over in section complete all as specified and directed

Dismantling of Wall and ceiling boards (fibre,pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets and scantaling.

Demolition of brick work or stone masonry, built in cement mortar including all quoins, arches, pillers, etc but excluding ashlar facings, dressed stonework and precast concrete articles

Taking down cement plaster on brick wall/stone wall, ceilings etc, racking out joints, hacking for key & scrubbing with water completely.

S&F clean sawn timber of second class hardwood in scantling fixed as in purlins rafters etc complete all as specified and directed

Preparing surfaces of wood and wood based materials,new or old, of any description and girth, not otherwise described and treated with one coat of creosote oil complete all as specified and directed

M&L for brick work with sub-class 'B' bricks, straight or curved on plan to any radius in full brick thick walls, built in cement mortar (1:4) complete as specified and directed.

M&L for rendering 15mm thick plaster in two layers (10mm+5mm) on brick or concrete surfaces in CM (1:4) mixed with WPC on second layer finished the surface even and smooth without using extra cement complete all as specified and directed. (Note- supply only WPC shall be measured and paid seperately).

Supply only liquid water proofing compound Note: Dose of WPC shall be as per manufacturer instruction.

M&L for rendering 10mm thick on other than fair faces of brick work or concrete surfaces in cement mortar (1:6) finished even and smooth without using extra cement complete as specified and directed.

S&F Prepainted galvalume aluminium zink coating GI based corrugated/ semi corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as iridges, hips, valley cutters, eave board etc fixed with self tapping screws complete all as specified and as directed..

S&F mild steel work in tubular trusses/ purlins/rafts/post etc including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS 1239 complete as specified and directed.

M&L Rolled mild steel plates (plain or chequered), channels, square cut or notched (ordinary or counter sunk) forming holes, with riveted, bolted or welded attachment etc, conforming to Fe-290 Gde E-165 compete as specified and directed

M&L preparation of new iron and steel surfaces of any description, exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer complete as specified and directed.

Supply and fixing anodized aluminium snap grid frame work for false ceiling, size of grid 605mm x 605mm complete all as specified & as directed.

M&L for 6mm thick, Non asbestos fibre cement building boards fixed in ceiling or laid/ inserted to timber/GI/Aluminium frame work with screws, etc complete as specified and as directed.

Excavation over areas n. exc 1.5 mtr deep and getting out soft/loose soil complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and as directed.

Removing excavated materials to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point, complete all as specified.

M&L for Brick work with sub class 'B' bricks straight or curved on plan exc 6.00 m mean radius built in cement mortar (1:6) complete all as specified and directed.

M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar (1:4) complete all as specified and directed.

M&L for PCC (1:4:8) type D2 using 40 mm graded stone aggregate in foundations, filling and mass concrete complete all as specified and as directed.

M&L for cement concrete (1:2:4) type B1 using 20 mm graded stone aggregate as in surface channels and drains and benching including finishing the top of benching even and smooth using extra cement complete all as specified and directed.

M&L for cement concrete (1:2:4) type BI using 20mm graded stone aggregate in bed block for hold fasts and coping incl necessary form work weathering slighly rounded or chamfered angles and treating and making good the disturbed portion without using extra cement complete all as specified and directed.

M&L formwork to rough finished surfaces of flat concrete, sides and soffits of floor or roof beams, beam haunching, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. complete all as specified.

M&L for reinforced cement concrete (nominal mix) (1:2:4) type B1 using 20mm graded aggregate as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed. Note:- Reinfocements will be measured and paid seperately under appropiate item

M&L for TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified and directed.

M&L for mild steel TMT bars 5mm to 10mm dia as in stirrups, spacers and binders cut to length bent to shape required, including cranking, bending, spirally for hooping for columns, hooking ends and bending with and including MS wire (annealed) not less than 0.9 mm dia, complete, all as specified and directed.

S&F Mild steel framed work such as grills,gratings,etc.with ends of bars shouldered and/or riveted,or forged into spikes,framed guard bars, barred iron doors,ladders, framed balusters, walk ways,railings, framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed.

M&L for preparing new Steel surfaces of any description, not otherwise describe not exceeding 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

M&L formwork to fair finished surfaces of soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exc 200mm thick (Horizontal or sloping) for rough finished flat surfaces of concrete complete all as specified.

M&L formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofsetc not exc 20cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but not exc 20cm wide for rough finished surfaces complete all as specified.

M&L for reinforced cement concrete (nominal mix) 1:2:4 type B1 using 20mm graded stone aggregate in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, shelves and the like complete all as specified and as directed. Note :- Reinforcement & formwork shall be measured and paid for separately.

M&L for precast RCC (1:2:4) type B1 using 20mm graded crushed stone aggregate as in landings, cover slabs (for man holes, drains etc.) position including necessary form work and set in CM (1:4) complete all as specified and as directed. Note :- Reinforcement shall be measured and paid for separately.

M&L for 100mm PCC (1:3:6) type C2 (using 40 mm graded stone aggregate) as in paving finish even and smooth without using extra cement at road cutting/ footpath complete all as specified and as directed.

M&L machine pressed cement concrete, coloured tiles of size 250 x 250 x 22 mm thick with grey cement and pigment and pointed in neat cement slurry in floors to matching with coloured of tiles, over and including 15mm thick screed bed in CM (1:6) complete all as specified and as directed.

M&L for 75mm PCC (1:3:6) type C2 (using 40 mm graded stone aggregate) as in plinth protection, finish even and smooth without using extra cement complete all as specified and as directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms, moulds mitred/stopped ends etc complete all as specified and directed. Note :- Measurment shall be taken only for inner girth.

Add to (or deduct from) serial item No. here-in-above for each 25mm girth or part thereof over or under 30cm inner girth.

Excavating in trenches. n exc 1.5 m wide and n exc 1.5 m in depth, for foundation, etc n exc 10 sq m on plan and getting out soft/loose soil complete all as specified and as directed.

Excavating in trenches. n exc 1.5 m wide and depth exc 1.5m and not exc 3m, for foundation, etc n exc 10 sq m on plan and getting out soft/loose soil complete all as specified and as directed.

Excavation over areas exc 1.5 mtr deep and not execeeding 3.0m deep and getting out soft/loose soil complete all as specified and directed.

Excavation over areas exc 3.0 mtr deep and not execeeding 4.50m deep and getting out soft/loose soil complete all as specified and directed.

M&L for preparing newly plastered surfaces and applying two coats of white wash on walls complete all as specified and as directed.

Supply and fixing PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls for 110 mm bore of pipe complete all as specified and as directed.

S & F 110mm bore PVC ( SWR) vent cowl complete all as specified and directed.

M&L for TMT bars 6mm to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified and directed.

M&L for loose filling with broken bricks aggregates n.exe 63mmcomplete all as specified and directed.

M&L for 25 mm thick cement concrete type B-0,1:2:4 using 12.5mm graded stone aggregate, finished ement concrete surface even and smooth without using extra cement complete all as per specified and directed

S&F 110mm bore PVC (SWR) Pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

M&L for concrete bed to drain pipes including packing under and completely surrounding pipes with concrete after they are laid and tested in PCC (1:3:6), type C-2, using 40mm graded stone aggregate for 150mm dia pipes complete all as specified and as directed.

S&F salt glazed stone ware drain pipes of 150mm bore, grade `A', ISI marked, laid to slope in trenches, jointed in CM (1:1) and tested complete all as specified and as directed.

S&F salt glazed stone ware drain pipes of 200mm bore, grade `A', ISI marked, laid to slope in trenches, jointed in CM (1:1) and tested complete all as specified and as directed.

Taking down carefully copper / Aluminium point wiring including (light, fan, socket or power complete fittings, such as switches, ceiling roses, pendant holders, Batten holders, shades conical fan regulators, light or power sockets etc) removing materials from site and making good disturbed surfaces of walls roofs etc complete all as specified and as directed.

M&L for concealed point wiring complete with 1.5 Sqmm single core multistranded copper conductor PVC insulated and unsheathed FRLSH cable 1100 volts grade drawn through and including non metallic rigid PVC Concealed conduit,medium grade minimum 20 mm dia ISI marked and conduit accessories fixed on recesses of wall/ceiling/roof and chisselling on wall complete and making good the disturbed surfaces of wall / ceiling by cement mortar 1:4 including painting to existing surfaces etc with sunken type pressed steel/welded MS terminal boxes made out of 1.25 mm MS sheet for mounting of fittings like switch, socket and fan regulator with 3mm thick hylum laminated sheet cover including cutting chases pining in for concealed conduit wiring amd making good of disturbed surface complete forOne light/fan/ Bell point controlled by one one way switch complete all as specified and as directed.

Supply and fixing Modular switch one way 10 Amp, single pole, 240 Volts complete all as specified and as directed.

Supply and fixing ceiling rose surface bakelite two to three terminal 65 x 50 mm three terminal 250/230 volts ISI marked complete all as specified and as directed.

Supply and fixing as in repair LED light lights fitting 1x18W/20W, 220V, AC decorative box type with CRCA body precotaed white & pre wired for driver, holder connecting up with LED down rod three core flexible copper conductor cable of suitable size from ceiling rose including LED tube light complete all as specified and as directed.

Supply and fixing modular electronic fan step regulator, tiny, EME, 100W, A/C 240 Volts complete all as specified and as directed.

Supply and fixing in repair LED street light fitting 60 Watt 230 V AC50Hz endura pearl plus energy saving, environmetal friendly, long life exclusive innovation, outdoor type with high pressure die cast aluminum housing IP 66/65 bay light with high power LEDs as light source and impact resistance IK07 with 10KV Built-in Surge protection device and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management complete all as specified and directed.

Supply and fixing cable Junction Boxes IP 66 “halogen free and weather proof” for outdoor installation (with metric knockouts for cable entry - Black Colour) size 200 x 160 x 98 mm suitable for 16/25 sq.mm fixed to pole /wall with suitable FI clamp 20X3 mm nuts, bolts and washers including provision of 01 No miniature circuit breaker (MCBs) single pole, 240 volts 10 KA 10 Amps and including suitable capacity aluminium bus bar (minimum 100Amps-04Nos) mounted on insulator complete all as specified and as directed,

Supply and fixing in repair PVC insulated and PVC sheathed, copper conductor industrial cable 1.5Sqmm, double core of copper conductor for connection of street light fittings on pole from junction box including termination clip complete all as specified and as directed.

Material and labour for 15mm bore galvanized mild steel/ tubes, 'light grade, complete with all fittings; fixed to poles for protection of cable from junction box to street light with mild steel clamps, bolts, nuts and washers as required for pipe for fixation of pipe alongwith pole complete all as specified and as directed.

Supply and fixing GI bracket complete with 1.2m long G.I. pipe 40mm dia light. grade, two nos 90/45 degree bends. M.S.hook and stay or guy and fixed with 25mm x 4mm MS flat with necessary nuts, bolts, washers etc, as required and painting with two coats of synthetic enamel paint over a coat of primer and fixed to pole complete all as specified & as directed.

M&L for Earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6.3 mm thick buried directly in ground ( earth pit not less than 2.25 mtrs deep below normal ground level) with the top edges of plate not less than 1.5 mtrs below normal ground level connected to GI strip of 25X4 mm by means of GI nuts, bolts check nuts and washers earth lead protected by 15mm dia GI pipe light grade and connected to main distribution board/earthing test point all as shown in electrical plate No 3 of SSR part 1 and all as specified including testing on completion. Notes:-The unit rate also including for excavation, earth work in any type of strata, plain cement concrete 1:3:6 mix, Type C1 pit, 40mm thick RCC 1:2:4 mix , type B1 cover reinforced with 8mm dia TMT bars @150mm C/C both ways ,GI funnel with GI watering pipe 20mm dia med grade, wire mesh, protection pipe 15 mm dia GI pipe light grade for earth lead upto 7.50m long, charcoal & salt complete all as specified and as directed.

M/S SUNRISE ENTERPRISE (BID ID -3426229)

M/S SEWAK SINGH (BID ID -3418936)