REPAIR TO FLOORING, TILING, PLASTERING, JOINERY, PLUMBING, CLEANING AND REPAIR OF SEWAGE LINES, MANHOLES ETC AND PIPE LINE, PUMP HOUSE AND CONNECTED WORKS AT CHAUTAN HILL TOP UNDER GE AF UTARLAI

Amount

M&L preparation of old distempered wall surface including brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and effloescent salts and trading oil and greasy spots and applying a coat of distemper oil emulsion any tinted over one coat of wall care putty. Complete all as specified and directed by Engineer-in-Charge.

M&L for preparation on old plaster surface of ceiling & applying one coat of white wash up to 12 mtr height of bldg. Complete as specified and directed by Engr-in-charge.

M&L for preparation on old plaster surface of walls & applying one coat of cement base paint up to 12 mtr height of bldg.Complete as specified and directed by Engr-in-charge.

M&L for preparation of old painted steel surfaces of any description over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint, Complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of old painted wooden surfaces of any description over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint, Complete all as specified and directed by Engineer-in-Charge.

M&L for complete removal of existing treatment any type & any description and applying one coat of Weather Coat Paint (APEX) @ 0.83 Ltr/10 Sqm over one coat primer @ 2.20 Kg/10 Sqm of any colour up to 12 mtr height of bldg incl necessaty scaffolding Complete all as specified and directed by Engineer-in-Charge.

M&L for applying five layered APP(atactic Polypropylene) modified polymeric membrane with non woven polyester reinforcement of minwt 3kg/sqm over screed bedding of 15mm thick CM 1:4 on roof slab over 25mm thick cement concrete (1:2:4) type B-0 using 12.5mm stone aggregate at roof padding and membrane shall be laid by torch application with minimum end and side over lap of 100mm (over laps to be bounded with thermo fused by flame) along with a coat of bituminous oil based primer @250gm/sqm including taking down of old roof treatment complete all as specified and directed. Note :-1.Application of APP shall only be carried out by authoried company applicator and applicator shall got approved from GE before Execution 2.One coat of aluminium paint over a coat of aluminium paint primer shall be carried out on APP membrane and cost of shall be deemed to be included in quoted rate 3. Before application of APP membrane surface shall be properly cleaned to remove dust

Supply only integral water proofing compound.

Cutting down Vegetation growths like plants/trees of girth n.exc 15cm from roof tops/sides, external walls of bldgs, Chajjas, wall junctions at junctions of rain water/ CI waste water pipe junctions including removal of roots and taking out carefully possible quantity of concrete in roofs embedded in walls/slab surfaces including repairing the GI/ CI/ PVC pipe joints of that affected locations and applying TUFALO chemical (herbal rnedicine) to arrest further growth and making good the distrubed surfaces with PCC (1:2:4) type B-1 or CM 1:2 or brick work in CM 1:4 and plastering with CM 1:4 and treating tthe surfaces to match with the adjoining surfaces up to 12 mtr height of bldg all as specified and directed by the . Note :- (i) The unit rate quoted shall be deemed to include the cost of scafolding/staging etc. (ii) Any CI/AC/PVC special damaged during work shall be replaced by new one to ensure leak/seapage free joint unit rate quoted shall deemed to be include cost of replacement of specials.

M&L filling surface cracks not exc 5 mm to 7 mm wide with "Dr fixit" cracks X power or equivalent polymer molified cracks filler all as per manufacturer instructions and as directed.Complete as specified and directed by Engr-in-charge.

M&L for coloured glazed ceramic tiles 350x250x7mm/450x350x7mm 7-8mm thick in vertical surface set and jointed in neat cement slurry and pointed with white/coloured cement to over a 10mm mortar bedding of CM (1:4) including dismantling old tiling including cement mortar bedding complete all as specified and directed by Engineer-in-Charge.

M&L for 25mm thick PCC 1:2:4 type B-0(using 12.5mm graded aggr) as in level course finished even and rough with out using extra cement including demolition of old unreinforced cement concrete complete all as specified and directed.

M&L for 40 mm thick cement concrete (1:2:4) type B1 using 20mm graded aggregate finished even and smooth with using extra cement including demolition of old unreinforced cement concrete complete all as specified and directed .

M&L glass dividing strips, 3mm thick , width of strip 38mm and inserted in position to conform to design, Complete all as specified and directed by Engineer-in-Charge.

M&L for Non skid ceramic tiles 7 to 8 mm thick ( square/rectangular) in any shade are of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm. In floors, skirting and similar work etc over screed bed or bedding layer 15mm thick in CM(1:4), set and jointed in neat cement slurry and pointed white or coloured cement to match including taking down old tiling Complete all as specified and directed by Engineer-in-Charge.

M&L for Non skid ceramic tiles 7 to 8 mm thick ( square/rectangular) in any shade are of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm. In floors, skirting and similar work etc over screed bed or bedding layer 15mm thick in CM(1:4), set and jointed in neat cement slurry and pointed white or coloured cement to match including taking down old tiling complete all as specified and directed by Engineer-in-Charge.

M&L for vitrified ceramic tiles 10mm thick ( square/rectangular) polished in any shade, area of each tiles not exceeding 0.36 sqm, in floors, skirting and similar work etc, screed bed or bedding layer 15mm thick in CM(1:4), set and jointed in neat cement slurry and pointed cement to match including taking down old tiling complete all as specified and directed by Engineer-in-Charge.

M&L for machine cut kota stone slab flooring , 20-25 mm thick over screed bed or bedding layer 20mm thick in CM(1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing including taking down old kota stone slabflooring with screed bedding Complete all as specified and directed by Engineer-in-Charge.

M&L for granite (of any type) work of any shade 18 to 20mm thick (table rubbed and polished) in any shade as in cooking platforms, wall clading and similar work over screed bed or bedding layer 20mm thick in CM(1:6), jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone incl grinding and polishing complete including taking down old granite with screedbed Complete all as specified and directed by Engineer-in-Charge.

M&L for rounding to edges of stone slabs one edge, such as in steps, cooking platform and other similar situation. Complete all as specified and directed.

M&L for cutting hole of any dia for cooking plateform for gas pipe line and similar work incl making good to existing surface. Complete all as specified and directed.

Dismantling of wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs/blankets any thickness and type or simlar patttern roof ceiling. Complete all as secified and directed by Engr-In-chage.

S&F for GI frame work for seamless ceiling size of grid 600 x 600 mm comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using screws at 450 mm c/c channel 0.9 mm thck having two equal flanges of 15mm each and web of 45 mm seuspenced from soffit at approx 900 mm C/C with GI cleat/wire or similar item and steel expansion fasteners with and incl ceiling section of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with cennecting clips across the intermediate channel at 457 mm C/ C. Complete all as specified and directed by Engineer-in-Charge.

S&F for 4 mm thick pre painted designer E-board (asbestos cement) plain building boards, fixed to framed work. Complete all as specified and directed by Engineer-in-Charge. Make : Everest of Equivalent.

M&L for 12mm thick Gypsum board in ceiling fixed with screw as per manufacturer's instrucions including preparation of surfaces new or old decorated, necessary fixing of anchor and bolts where required complete all as specified and directed.

M&L for precast cement concrete block masonry with solid blocks of PCC 1:3:6 type C1 using 20 mm graded stone aggregate, exc. 10 cm in width and setting in CM 1:6 complete incl Demolition of brick work or stone masonry, built in cement mortar.

M&L for rendering 15mm thick CM 1:6 on concrete surface or brick work finished even and smooth without using extra cement also prepare the plastered surface and applying one coat of weather coat paint @1.67 1ltr/10sqm over one coat primer @ 202 kg/10sqm of any colour upto 12mt height of bldg including taking down old plaster, racking out joint, hacking for key, scrubbing down with water complete all specified and directed by Eng-in-charge.

M&L for rendering 10mm thick in CM (1:6) on walls, finishing even and smooth without using extra cement similar work and Prepration on new plastered wall surface and applying two coat of oil bound distemper over one coat of alkali resisteant primer, incl and over two coat of wall care putty including taking down old cement plaster including racking out, hacking complete all as specified & directed by Engineer-in-Charge

M&L for rendering 5mm thick in CM (1:4) on concrete surface such as roof projection, chajja, fin and similar work up to 12 mtr height of the bldg, finishing even and smooth without using extra cement and Prepration on new plastered ceiling surface and applying two coat of white wash over one coat of white cement primer up to 12 mtr height of the bldg including taking down old cement plaster complete all as specified & directed by Engineer-in-Charge

Taking down shutters of any description exc 1 sqm but n.exc 2 sqm each .Complete all as spcified.

S&F 35mm thick panelled shutters, (any number of panels) with panels of timber flat on both sides (feather edged) or of vennered particle board mediu density, wood particle board with commercial face veneers fitted to fhowkats.. complete all as specified & directed by Engineer-in-Charge.

S&F 35 mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) , edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing gauze etc, sizes of members of shutters as specified in SSR Part I. (2st class haed wood). complete all as specified & directed by Engineer-in-Charge

S&F in repair galvanized steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm complete all as specified and directed.

S&F in repair 150mm long aluminum alloy handles, anodized complete as specified.

S&F in repair 250mm length aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts and sliding bolts of extruded sections or cast-aluminium alloy.

M&L for preparation of new or untreated wooden surfaces of any description over 10cm width or girth not otherwise described and applying two coat of synthetic enamel paint over one coat of primer, Complete all as specified and directed by Engineer-in-Charge.

Taking down frames with shutters (without taking off shutters from the frame ) area not exc 1.5 Sqm Each incl iron mangery complete.

S&F PVC moulded door frame of size 50x47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification and drawing all as directed

Supply and fixing factory made solid panel PVC door shutter 30 mm thick (style)consisting of frame made out of MS tubes for top and bottom rail. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail ; panelling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling & fixing in the frame at site as per specification and drawing. Complete all as specified and directed by Engineer-in-Charge.

S&F in repairs butt hinges, 100 mm size extruded aluminium alloy with galvanised mild steel hinge pin, anodised .

Hacking out old broken glass from metal frame, including cleaning and removing old putty clip etc and S&F of sheet glass 3mm thick ordinary quality and glazing with oil putty in square n.exc 0.5 Sqm in Each pane up to G+2 height bldg.

S&F Anodised aluminium frame for doors,windows, ventilators with one or more rebates including joining cleat for fixing/sliding etc. Complete all as specified and directed by Engineer-in-Charge.

S&F Anodised aluminium rolling/sidehung door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges/rollers, anodised aluminum snap beading screws etc . Complete all as specified and directed by Engineer-in-Charge.

S&F Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) Complete all as specified and directed by Engineer-in-Charge.

M&L Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, Complete all as specified and directed by Engineer-in-Charge.

S&F in repair 12 mm thick veneered decorative plywood with laminate both side,, ISI marked as in cupboard shutter / shelves, one side with decorative choice lamination and other side balancing white lamination including 6mm thick teak wood liping, including timber frame of suiatable size fixed with screws to timber frame work Complete all as specified and directed by Engineer-in-Charge.

S&F PVC wall lining/clading/paneling consisting of 5 mm thick plain/colour pvc sheet inclusive of solvent cement and fixing at site on pvc frame as per site requirement including dismantling of old wall panalling any description. complete all as specified and directed by Engr-in-Charge.

S&F 20 mm thick in many layer PVC sheet fillets of width 35 mm for wall paneling inclusive of fixing to wall to make pvc frame as per site requirement. complete all as specified and directed by Engr-in-Charge.

Taking down aluminium doors/Window shutters carrying out minor repairs/adjustments including rubber beading, aluminium beads, cleats of required size and refixing in same position incl S&F of neccesary items such as handle, rubber beading, aluminium bead/cleats and similar work. complete all as specified and directed.

S&F in repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed. Complete as specified and directed by Engr-in-charge.

S&F in repair door closer hydraulically regulated, aluminium die cast body, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm width and weight between 6.1 to 8.0 Kg and fixed, Complete as specified and directed by Engr-in-charge.

S & F in repair Aluminium anodised barrel tower bolts of extruded section, 200mm long Complete as specified and directed by Engr-in-charge.

S & F in repair Aluminium anodised barrel tower bolts of extruded section, 150mm long Complete as specified and directed by Engr-in-charge.

S & F in repair Aluminium anodised fabricated type handle of extruded section, 150mm long Complete as specified and directed by Engr-in-charge.

S & F in repair mild steel butt hinges 100mm size cold rolled medium weight welded or screw to framed and shutter. Complete as specified and directed by Engr-in-charge.

S&F in repair floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in floor, overall length of cover plate 140 mm, complete all as specified and directed.

S&F in repair 200 mm long mild steel ordinary helical door spring including roller and roller plate, complete all as specified and directed.

S & F in repair curtain rails/rod 20mm bore decorative type chromium plated with fixing with decorative type brackets and end blub, stops, rollers, etc complete all as specified and directed.

M&L for welding in repair n. exc. 10 cm in length, thickness of metal to be welded n. exc. 6 mm complete all as specified and directed.

S&F in repair of aluminum door lock Aluminium vertical type 100mm, 4 lever suitable for aluminum doors with duplicate key.

S&F in repair of Cupboard shutters lock brass vertical type 75mm grade I, 4 lever suitable for steel shutters with duplicate key.

S&Fin repair SS decorative type peg set (06 of peg in one set over SS plat) as per sample approved by Engr-in-charge.

S&F in repairs, PVC decorative type toilet cabinet with mirror of overall size 350 x 450mm complete all as specified and directed.

M& L Refixing old steel tubing after cleaning old steel water tubing 15mm bore and connection new or old position fixed to wall/ceiling or laid in floors including taking up or down existing steel water tubing. Complete as specified and directed by Engr-in-charge.

M&L Refixing old steel tubing after cleaning old steel water tubing 20mm bore and connection new or old position fixed to wall/ceiling or laid in floors including taking up or down existing steel water tubing. Complete as specified and directed by Engr-in-charge.

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position capacity of tank exc 250 litres & n exc 500 litres. Complete as specified and directed by Engr-in-charge.

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position capacity of tank exc 500 litres & n exc 1000 litres.Complete as specified and directed by Engr-in-charge.

S&F in repair for 500 litres capacity tripple layer rotational moulded white colour polyethylene tripple layer water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position incl 20mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe including taking down old water tank. Complete as specified and directed by Engr-in-charge.

S&F in repair for 1000 litres capacity tripple layer rotational moulded white colour polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position incl 20mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe all as specified in SSR Part I. Complete as specified and directed by Engr-in-charge.

S&F in repairs 20mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe complete all as specified and directed. Complete as specified and directed by Engr-in-charge.

S&F in repair PVC water tank cover best quality suitable for 500 &1000 Ltrs capacty water tank. Complete as specified and directed by Engr-in-charge.

S&F in repairs, vitreous China wash hand basin, white, flat back size 550 x 400mm including 15mm dia, 450 mm long HDPE PVC connection, 32 mm dia wast coupling and 32mm bore Waste coupling fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement including CI brackets all directed.

S&F in repair vitreous china squatting pan ORRISA pattern, size 580x440mm white, with integral foot rest including provn of concrete bedding and connection to trap and flushing pipe antisyphonage pipe etc comple incl making good to floor.

S&F in repair Vitreous China wash down water closet pan (pedestal pattern) white with "P" or "S" Trap front or back inlet fixing bols, PVC seat cover closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device and making all necessary connection complete as directed.

S&F in repairs Vitreous China urinal bowl type flat back or angle back type, size( 465x355x265m) complete including providing and fixing plugs,waste pipe 32mm dia ,bedding urinal against wall in cement mortar 1: 2, screwing urinal to plugs with and including 60 mm long brass screws pointing around urinal back in cement mortar complete all as specified.

S&F in repair floor trap/nahani trap of cast iron with CP grating incl jointing to waste pipe in cement mortar, dia meter of outlet is 100 mm, complete all as specified and directed.

S & F in repair superior quality PVC Urinal waste pipe, 32 mm bore, 650mm long, complete all as specified and directed.

S&F in repairs plastic water closet seat white colour,closed pattern with flat bottom and cover with mild steel CP or aluminium hinge device ect complete

S&F in repair PVC valve less symphonic action type, flushing cistern, low level, white of capacity 10 ltrs with inlet , ball valve, float and handle including brackets.

S&F in repairs flushing jet CP for pedestal pattern wc incl.flexible pipe and brass chromium plated nuts and bolts and water pipe of size 1000 mm long b/w dia & fixed complete.

S&F in repair CP brass swival type shower rose 100mm size with one stainless steel wall flange and shower arm, including fixing to GI pipe or union, complete all as specified and directed.

S&F in repairs chromium plated tubular towel rail 20 mm dia, D type 60 CM long complete all as specified and directed.

S&F in repair CP fancy type bib taps 15mm long body bore cast coper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for union complete all as specified and directed.

S&F in repair 15 mm dia stop cock fancy type, chromium plated with long shank and cup (conncelaed type)for iron pipe or for unions and fixed.

Fixing in repair CP pillar taps fancy type (long neck/swan neck type) , of 15 mm dia, cast copper alloy, with capstan heads, with chromium plated, screwed down high pressure with or without lettered 'hot' or cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed.

S&F in repair 15mm bore CP angle valve cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union complete all as specified and directed.

S&F in repair two way CP angle valve 15 mm nominal bore cast copper alloy, chromium plated, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or for unions and fixed, complete all as specified and directed.

S&F in repair fancy type CP wall mixer for mixing hot & cold water, with L band for provn of over head hower arrangement, chromium plated brass with three joints, screwed to iron pipe or for unions, 15 mm bore and fixed with two stainless steel wall flange, complete all as specified and directed.

S&F in repair fancy type mixing valve, chromium plated brass, centre hole basin mixer, screwed and jointed to PVC connection with nuts in wash hand basin, 15 mm bore, complete all as specified and directed.

S&F in repair 32mm dia waste coupling of CP (half or full threaded) Minimum weight 32mm-45gms/40mm-60 gms) Ditto but suitable for urinals (Minimum weight 32mm-45gms)

S&F in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes including fixing cantilever brackets coupling & waste pipe and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 200mm complete all as specified and directed.

S&F stainless steel utensil plate rack of size 900x1000x200 mm, made of 0.60 mm thick stainless steel sheet and fixed in position, design and pattern as approved by the GE, complete all as specified and directed.

S&F in repair CP hand spray (health facucet with 1.0 M long easy flex tube in chrome finish and wall hook) complete all as specified and directed

S&F in repair PVC syphon with handle for PVC flushing cistern, any capacity, complete all as specified and directed.

S&F in repair PVC connections, 600 mm long with two PTMT nuts and washers, suitable for connecting 15 mm bore pipes, complete all as specified and directed.

S&F in repair 15mm bore PVC connections, with PTMT nuts of length 450mm complete all as specified and directed.

S&F in repairs PVC flexible waste down pipe-32 mm dia and 1000 mm long for sink.

S&F in repairs CP grating doom of 100/110 mm dia, made of stainless steel with or without waste pipe hole, complete all as specified and directed.

S&F in repair CP soap dish of any type, fixed with PVC rawl plug and stainless steel screws, complete all as specified and directed.

S&F in repair 8mm thick Corner glass shelf (200mm long in corner), with 150mm long decorative type SS F bracket 02 Nos set in each shelf . all as specified and directed.

S&F in repair 8mm thick straight glass shelf 600mm long and 200mm wide, with 150mm long decorative type SS F bracket 02 Nos set in each shelf . all as specified and directed.

S & F steel tubing galvanized, medium grade with all fittings, laid in floors or fixed to walls,15mm bore.including taking down old pipe complete all as specified and as directed.

S & F steel tubing galvanized, medium grade with all fittings, laid in floors or fixed to walls, 20mm bore.including taking down old pipe complete all as specified and as directed.

M&L for cement concrete (1:4:8) type D2 using 40 mm graded stone aggregates as in foundation, filling and mass concrete incl demolition of existing concrete. all as specified and directed.

M&L for walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in CM 1:6.

Providing & Laying, cement concrete Type B0 1:2:4 type (12.5mm) graded graded graded aggregate) in benching, Coping all as directed.

M&L for rendering 15 mm thick in CM (1:4) on stone masonry surfaces or surface other than fair face of brick-work/Block work or on one side of lathing finished even and smooth without using extra cement with using integral water proofing compound as per manufacturer instructions. Note: Integral Water Proofing compound shall be measured and paid for separately as “Supply only”.

Supply only integral water proofing compound ISI marked.

Excavating in trenches in any type of soil, n.exc. 1.5m wide and n.exc. 1.5 m in depth, for foundation, etc. or for shafts, wells, cess pits, manholes, pier holes, etc n.exc. 10 sqm on plan and n.exc 1.5m in depth and getting out.

Returning, filling in (soil), including spreading, leveling, watering and well ramming in layers not exc. 25cm.

Removing excavated material (soil) n.exc. 50 m and depositing where directed at a level n.exc. 1.5 m above the starting point.

M&L for cement concrete 1:4:8 type D-2 using 40 mm graded stone aggregate as in bed to drain pipes of size 150 mm bore, including packing under & haunching against the sides of pipes after they are laid and tested including demolition of old cement mortar complete all as specified and directed

M&L for salt glazed stone ware pipe with collars of 150 mm internal dia, grade `A’ ISI marked laid to slope in trenches, jointed in CM 1:1 including demolition and breaking up drain pipe complete all as specified and as directed.

M&L for Reinforced concrete pipes, class NP2, with collars of 150 mm internal dia, grade `A’ ISI marked laid to slope in trenches, jointed in CM 1:1 including demolition of old RCC pipe complete all as specified and as directed.

S&F in repair Salt-glazed stoneware gully traps, square or round mouthed, tvpe 150/100 mm,setting and jointing with solvent cement all as directed.

S&F in repair PVC (SWR) gully trap 125/110 mm,setting and jointing with solvent cement all as directed.

M&L for cutting into existing manholes for connecting new drains of 150mm internal dia, making good to pipe and rendering, cutting out existing benching for and forming branch channel ( ½ round or 3/4 Section) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching as required.

M&L for precast reinforced cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate in landings, cover slabs (for manholes/septic tank/soak well etc.) chullah hoods, chajjas, shelves and similar articles with plain faces, set in CM 1:4, including necessary form work moulds etc all as specified including demolition of old reinforced cement concrete complete all as specified and direcetd (Reinforcement shall be measured and paid for separately).

M&L for mild steel TMT bars 6 mm to 8 mm dia, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia.

M&L for mild steel TMT bars 10 mm dia and above, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia.

M&L for cleaning pipe lines 150mm dia by rodding from Man holes and well flushing with water after cleaning all as specified & directed.

Clearing of blockage of Nahani Trap of bath room, kitchen by rodding blockage including taking down and refixing of grating etc complete all as specified and directed by Engineer-in-Charge.

Clearing of blockage of gully trap of bath room, kitchen by rodding blockage including taking down and refixing cover complete all as specified and directed by Engineer-in-Charge.

Clearing of blockage of Indian type WC/ Europion type WC by rodding/ pumping by hand including taking out door and refixing of over access covers etc complete all as specified and directed by Engr-in-Charge.

Cleaning of manholes of size n.exc 1.00 sqm plan area (internal) and n.exc 1.00 Sqm depth from GL including removal of manhole covers carefully, cleaning of sludge etc and refixing the manhole covers with cement mortar (1:4) (Sluge shall be removed outside MD land)

All as per item No.126 above but depth exc 1.00m and n.exc 2.00m.

Pumping out sewage water/sludge from existing septic tank/soak well of any size & capacity and removal the sludge to out side MD land

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding top wall, fixed with self tapping screws, including dismantling of plain or corrugated steel sheeting any gauge, thickness incl nainital or simlar patttern roof coverings Complete all as specified and directed by Engineer-in-Charge.

M&L for rubber moulded vibratory compacted coloured precast concrete interlocking paver block any shape and size confirming to IS-15658-2006 of 60mm thickness, M-35 Grade with grey cement and pigment over sand cusion over a 75mm thick layer of PCC (1:4:8)type D2 (using 40mm graded aggregate) as in sub base complete all as specified and directed.

M&L for rubber moulded coloured Chequered cement concrete tiles with grey cement and pigment 20cm x20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors, laid over and including 15mm thick screed bed in CM 1:6 over complete all as specified and directed.

M&L for 100mm thick cement concrete type B-2, 1:2:4 (using 40mm graded stone aggregate) as in floor finishes and paving.

M&L 75 mm thick cement concrete 1:3:6 type C-2 (using 40 mm graded stone aggt) as in plinth protection including forming groove 10 mm wide & 30 mm deep & filled with bitumenous filler complete all as specified and directed.

Dismantling posts or struts(wood, steel or RCC) any section embedded in concrete including taking out embedded portion of concrete and making good distrubed ground all as directed.

M&L Cement concrete (1:3:6) type C2 (using 40 mm graded aggregate as in foundation of post, filling and mass concrete including demolition of existing concrete any description.

Dismantling existing broken /rusted Fencing wire mesh of any size and position and removing from site.

S&F posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 290-0 E-165 all as directed.

S&F of MS galvanised chain link fencing of any size including line wire of 4mm dia GI wire any type of standards, rails straining bolts, etc including provision of binding wire complete all as specified and directed.

Supply & fixing MS round bar 10mm dia and over for line wire to chain link fencing etc complete.

S&F in repairs Galvanised, 2 strand, steel barbed wire 2.24 mm dia barbed wire with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolt , including securing or lying at crossing with and provision of galvanised mild steel wire, staples or steel pins, etc as directed incl dismantling old broken/rusted barbed wire of any dia and remove from site.

S&F MS screw bolt (machine made) with hexonal or screwed head at one end and screwed the other end, and fitted with washer and one hexagonal or square nut n. exc 5cm long and 5 mm to 10mm dia bolt.

Dismantling wrought iron or mild steel work of any description not otherwise provided for all as directed.

S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 all as directed.

M&L for preparation new steel surfaces of any description over 10cm width or girth not otherwise described and applying two coat of synthetic enamel paint over one coat of red oxide primer, complete all as specified and directed.

Supply and lay in replacement of steel water tubing GI medium grade ISI marked with all fittings laid in trenches, air/vertical on hill to be fixed with MS clamp of size 50x6mm and using nut bolts & washers etc complete for the following sizes including taking out old uerviceable pipe lines all as directed by Engr-in-Charge :-

20 mm bore

25 mm bore

40 mm bore

50 mm bore

Supply and fix in replacement of Gun - metal, globe or gate valve ISI marked with iron wheel head, screwed at both ends for iron pipes and fixed with suitable size of union for the following sizes including taking out old uerviceable gate valves all as directed by Engr-in-Charge :- :-

20 mm dia bore

25 mm dia bore

40 mm dia bore

50 mm dia bore

Repair and servicing of RO water plant 150 ltr per hr installed in ORs Mess with the following works :- (a) Replace the UV filter with assembly. (b) Dismantling of RO unit and cleaning RO water storage tank, removing inlet/outlet pipe line and replace the Chemical tube complete servising and cleaning the unit all as airby Engr-in- charge (c) Replacement of RO membrain. (d) Replacement of unsv motors of RO plant Note :- Cost of unserviceable spare parts deemed to be included in quoted rates

Repair and servising of RO water plant 150 ltr per hr installed in hill top Ops Room with the following works :- (a) Replace the UV filter with assembly. (b) Dismantling of RO unit and cleaning RO water storage tank, removing inlet/outlet pipe line and replace the Chemical tube complete servicing and cleaning the unit all as directed by Engr-in- charge (c) Replacement of RO membrain. (d) Replacement of unsv motors of RO plant Note :- Cost of unserviceable spare parts deemed to be included in quoted rates

M& L for testing of water of 02 x Borewells for potability and biological analysis etc from the specified lab complete all as specified and directed.

M&L repairing of Submersible pump set with multi stage, electric driven 415 volt,50Hz capacity 5 HP including taking up from borewell with column pipe and lowering down by using of tripod/lowring machine with chain pulley complete all as specified and directed. (a) Transportation of burnt motor to civil electric work shop. (b) Dismantling of motor, cutting and taking out burnt stator winding from motor cleaning the stator and rewinding with super enameled copper wire of original gauge / size with suitable for submersible motor, including tapping, Motor end shield, shaft sheild assembling and carrying to site including necessary connection, commissioning and testing on full load (Major spare parts will be measured and paid separately under respective items) (c) The nuts bolts/rubber gasket of column pipe will be replaced by new one. Note :- (i)Cost of minor spare parts deemed to have been included the quoted rates by the tenderer

S&F in replacement of following under mentioned worn out U/S parts of submersible pump set 5 HP for bore well complete all as specified and directed.

Bearing of suitable size

Strainer

Shaft seal

M&L repairing of Submersible pump set multi stage, electric driven 415 volt,50Hz capacity 10 HP including taking up from Under Ground borewell and refixing the same after repair by using tripad/ lowring machin with chain pulley Note: (a) Transportation of burnt motor to civil electric work shop. (b) Dismantling of motor, cutting and taking out burnt stator winding from motor cleaning the stator and rewinding with super enameled copper wire of original gaug suitable for submersible motor end shield, shaft sheild assembling and carrying to site including necessary connection, commissioning and testing on full load (Major spare parts will be measured and paid separately under respective items) Note :- The above quoted rates inclusive the cost of minor spare parts.

Supply and fixing in replacement of following under mentioned worn out U/S parts of submersible pump set 10 HP for UG sump all as directed.

Bearing of suitable size

Strainer

Shaft seal

M&L for valve pit chamber of size 1000x1000x1000 mm (internal) with PCC blick sasonary valve chamber, PCC foundation, plastering and necessary earth work in hard/dense soil, MS sheet cover 3.15mm thick alongwith angle iron frame of size 40x40x6mm with locking arangement, handle with necessary fixing materials like hinges, nut/bolts etc (valve chamber cover shall be opened in two halves) and painting to MS cover with one coat of red oxide and two coats of synthetic enamel paint etc complete all as specified and directed.

M&L repairing of Submersible pump set multi stage, electric driven 415 volt,50Hz capacity 20 HP including taking up from Under Ground sump and refixing the same after repair by using tripad/ lowring machin ewith chain pulley Note: (a) Transportation of burnt motor to civil electric work shop. (b) Dismantling of motor, cutting and taking out burnt stator winding from motor cleaning the stator and rewinding with super enameled copper wire of original gaug suitable for submersible moto,r end shield, shaft sheild assembling and carrying to site including necessary connection, commissioning and testing on full load (Major spare parts will be measured and paid separately under respective items) Note :- The above quoted rates inclusive the cost of minor spare parts.

Supply and fixing in replacement of following under mentioned worn out U/S parts of submersible pump set 20 HP for UG sump all as directed.

Bearing of suitable size

Strainer

Shaft seal

Excavation in trenches not exceding 1.5m wide and not exceding 10.0 sq m on plan and not exceding 1.5m depth and getting out soft soil.

Returing filling in including spreding leveling watering and well ramming in layer not exceding 25 cm as in soil all as specified and dirceted.

Removing excavated material not exceding 50 m and depostingwhere directed at a level not exceding 1.5 m above the starting point.

M&L for unlowering and lowering of Submersible pump set multi stage, electric driven 415 volt,50Hz capacity 5 HP including pipes complete by using tripad/ lowring machin with chain pulley etc complete all as specified and directed.

Cleaning of semi-UG sump of capacity 50000 ltrs, dewatering the tank below the suction pipe with submersible pump with suitable arrangements, desilting and removing of left obver water from bottom, cleaning tank surfaces by using bleaching powder approx 30 Kg and remove all foreign materials and clean with plain water and then after cleaning making white wash of the inner surface with the lime complete all as directed by the Engr-in-Charge. Note : (i) The job shall be completed within 08 hrs to avoid any interruption in distribution of water supply. (ii) The date of cleaning and due date should be written legible on the surface of the tank/sump as per existing old colour and font size.

Cleaning of semi-UG sump of capacity 20000 ltrs, dewatering the tank below the suction pipe with submersible pump with suitable arrangements, desilting and removing of left obver water from bottom, cleaning tank surfaces by using bleaching powder approx 25 Kg and remove all foreign materials and clean with plain water and then after cleaning making white wash of the inner surface with the lime complete all as directed by the Engr-in-Charge. Note : (i) The job shall be completed within 08 hrs to avoid any interruption in distribution of water supply. (ii) The date of cleaning and due date should be written legible on the surface of the tank/sump as per existing old colour and font size.

Cleaning of semi-UG sump of capacity 15000 ltrs, dewatering the tank below the suction pipe with submersible pump with suitable arrangements, desilting and removing of left obver water from bottom, cleaning tank surfaces by using bleaching powder approx 20 Kg and remove all foreign materials and clean with plain water and then after cleaning making white wash of the inner surface with the lime complete all as directed by the Engr-in-Charge. Note : (i) The job shall be completed within 08 hrs to avoid any interruption in distribution of water supply. (ii) The date of cleaning and due date should be written legible on the surface of the tank/sump as per existing old colour and font size.

M&L in replacement of indicator lamp complete all as directed.

Material and labour for Cement concrete in foundations, filling and mass concrete 1:3:6 on stone masonary blocks for fixing arrangement of GI pipe Clamps etc complete all as specified and directed.

Supply calcium based high strength granular chlorination chemical a white off white free flowing granular material which is free of foreign materials decompising at 177 degree C soluble in water and alcohol not hygroscopic practically clear in water solution auration level. The material should not contain more than 5% to 10% moisture. Granular should be as mesh passing through 100BS 1.5% maximum iron as Fe 0.05% maximum Mn 40 PPM maximum Mol wt 142.98, Toxicity: Oral rate LD 50-850mg/Kg. Make : Approved by AHQ E-in-c's Branch New Delhi/Zonal Chief Engineer

S&F in replacement automatic star delta submersible pump starter for 5 HP motor overlaod relay range 3.8 A - 6.0 A including dry mode ms enclosure of suitable size for the housing of the above said material enclosure which include single phase preventor, on/off switch,voltmeter,ammeter and mounting/clamping arrangement as required at site including including making electrical connection complete all as specified & as directed by Engineer-in-charge

Decarburizing/cleaning complete Control panel of Pumpset panel by cleaning bus bar chamber with suitable chemical and ensure proper decarburizing, internal wiring and replacing the damaged wires of existing size, refixing the same after applying suitable solution to the bus bar insulator & checking all the connections, tightening the nuts, bolts & thimbles of in-coming/out-going system complete incl replacement of defective rusted bolts & nuts, repairing to door/ shutter hinges and locking arrangements all a directed by Engr-in-Charge all as specified and directed.

Demolition of PCC & cement concrete chequred tiles and interlocking paver block complete all as specified and direcetd.

M/S Tanisha Traders (BID ID -3406790)