Supply and Installation of Electrical panel and fitting accessories for Pump House for the work of Clearance of flood water of Village Dubaldhan Ghikyan through underground RCC pipe line 900 mm dia and through pressurized pipe line out falling into L

NS Item - Supply, Erection, Testing & Commissioning of ATS Starter 200 HP with incomer MCCB of 400A, 3 pole, 36 kA along with Auto Transformer Starter of 200 HP having contactor rating 550A/400A/200A complete with UV /OV relay, Micro processor Overload relay having tripping of locked rotor, single phase, over load, under load, and earth fault complete with capacitor of 50KV are connected through separate MCCB, and operated through timer on startup having IP54 suitable for operating at voltage rating 380 volt ± 10% variation, 415 volt, 50 Hz. phase motor in CRCA sheet enclosure with overload, under voltage and single phasing protection through electronic relays, suitable MCCB, contractor, ammeters, Voltmeters, selectors switches complete in all respect. The panel should be inbuilt by one standard approved manufacturer = 2 Nos. One Bus Bar Box 630 Amp along with MCCB 630 Amp and DOI. Starter for vacuum pump complete with cables for connecting Motors from Starter from Bus bar Box complete in all respect

NS Item -Providing and laying LT armored PVC Copper cable of size 185 sq.mm 3.5 core conforming to IS 7098:1985 as per approved make. Ns items

NS Item -Providing and Laying LT armored PVC copper cable of size 70 sq.mm 3.5 core conforming to IS 7098:1985 as per approved make.NS item

NS Item -DV coupled set vacuum pumps with KVL make IE2 Mortar 5 HP

HSR Item 20.63.9-`Providing, lowering, laying in trenches, aligning, fixing in position and jointing Ductile Iron (DI) ISI marked K-9 grade SandS pipes as per 15:8329-2000 (amended up to date), with internal cement mortar lining for potable water with rubber ring (EPDM/SBR) joints as per IS: 5382-1985 (excluding special accessories) complete including all material, labour, hydraulic testing and commissioning as per Technical Specifications and as per direction of Engineer. Note: E/W to be measured and paid separately. ` 9. 500 mm i/d HSR Rate(Rs.) 6284.00 Through Rate

HSR Item 20.68.1-Providing, lowering, laying in trenches, aligning, fixing in position and jointing at all level/depths Ductile Iron (DI) standard specials plain /flanged/ socketed confirming to IS9523-2000 with rubber ring (EPDM/SBR) joints such as tees, bends, tapers, caps etc. within trenches in DI pipe line complete including all material, labour, testing and commissioning along with pipe line as per Technical Specifications and as per direction of Engineer. 1. Up to 300mm dia HSR Rate(Rs.) 64.00 Through Rate

HSR Item 20.68.2-Providing, lowering, laying in trenches, aligning, fixing in position and jointing at all level/depths Ductile Iron (DI) standard specials plain /flanged/ socketed confirming to IS9523-2000 with rubber ring (EPDM/SBR) joints such as tees, bends, tapers, caps etc. within trenches in DI pipe line complete including all material, labour, testing and commissioning along with pipe line as per Technical Specifications and as per direction of Engineer. 2. Above 300mm dia and up to 600mm dia HSR Rate(Rs.) 84.00