Maintenance work of railway overbridge built on the Unnao-Hardoi road in the district.

Replacement of existing damaged expansion joint by providing and laying of Strip seal Exp joint System including cleaning of gape dismentling of deck slabe portion near expansion joint wearing caot etc and back filling of the recess upto final finish level with concrete of grade M-35 complete as per approved drawing morth specification section 2607

Replacemnt of old drainage spout with new Drainage spout including providing, fitting, dismantling and widening the existing opening and fixing new drainage sopt, M.S. grating system Morth specification 2705.

Lifting of span, cleaning, oiling, greassing and re-setting of Rocker/Roller Bearing including cleaning of the surface thoroughly from grease, dust and foreign matter the cost includes all material, labour, machinery T&P and making all arrangement like scaffolding kirbs etc. as per MORTH & H specification 2808 & conforming to IRC: 183 (part-II) Section-IX

Plain Cement Concrete Grade M30 in Footpath complete as per Drawing and Technical Specifications.

Sealing of cracks/porous concrete by injecting process through nipples/Grouting complete as per technical specification 2806.

Removal of defective concrete, cleaning the surface throughly, applying the shotcrete mixture mechanically with compressed air under under pressure, comprising of cement, sand, coarse aggregate, water and quick setting compound in the proportion as per clause 2807.1 sand and coarse aggregate confirming to IS:383 and table 1 of IS:9012 respectively, water cement ratio ranging from 0.35 to 0.50 density of gunite not less than 2000 kg/cum, strength not less than 25 Mpa and workmanship confirming to clause 2807.6

Raplacement of Damaged Concrete Railing

Repair of RCC Railing

Raplacement of Damaged Mild Steel Railing

Repair of Damaged Mild Steel Railing

Finishing wall with two coat water proof cement paint including all cost material, labour, T&P etc. required for proper completion of work. SI No.661+662

Providing and applying tack coat with bitumen VG_10 using emulsion pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous surface cleaned with mechanical broom.

Providing and laying bituminous concrete with higher capacity batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects

Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes.

The Solar studs shall be made of Alumenium alloy poly carbonate material which shall be absolutely weather.

Please Enable Macros to View BoQ information