SPECIAL REPAIRS TO MES QTRS P115 AND P116 AT NORTH CAMP IMPROVEMENT UPGRADATION OF CERTAIN BLDGS FOR AGNIVEER VAAYU WOMEN AND VIP ACCOMMODATION ARBORICULTURE FOR LIVING IN ACCOMMODATION 03 JOBS AT ATS BELAGAVI

Amount

SCHEDULE A PART-I BUILDING WORKS

Dismantling wall hearth tiling including cement mortar bedding (but not backing) and removing unserviceable material as directed.

Demolition of cement concrete (unreinforced) of any description and in any position all as specified and directed

Taking down chowkhats or frame not exc 1.5 sqm with shuttter ( without taking off shutter from the frames) including making good to match the adjoining surfaces as specified and directed

Taking down chowkhats or frame exc 1.5 sqm and n.exc 4 sqm with shuttter (without taking off shutter from the frames) and removing to stores including making good to match the adjoining surfaces as specified and directed

M & L Cement concrete 1:2:4 , type B-0, using 12.5 mm graded crushed stone aggregate for 25 mm thick levelling course / to receive screed for laying tiles as specified and directed

M & L coloured ceramic Non skid tiles superior finish, 1st quality, 7 to 8 mm thick(square/ rectangular) area of each tiles exceeding 0.09 sqm but not exc 0.18 sqm in floor with rectified edges ( joint free) etc set and jointed in neat cement slurry over and including 15 mm thick screed bed in cement mortar 1:6 as specified and directed

M & L for Coloured glazed ceramic tiles superior finish, 1st quality of size 450 x 300 x 7 mm thick with rectified edges as in vertical surfaces set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 10 mm thick backing coat in cement mortar1:4 etc complete all as specified and directed

M & L double charged Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with rectified edges ( joint free) etc set and jointed in neat cement slurry over and including cement screed 15 mm thick 1:6 over 15 mm thick screed bed in cement mortar 1:6 as specified and directed

M & L double charged Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with rectified edges as in vertical surfaces set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and incl 10 cm thick backing with cm 1:4 as specified and directed

M & L Cement concrete 1:2:4, type B1 using 20 mm graded crushed stone aggregate as in 75 mm thick subbases, floors & pavings and plinth protection as specified and directed

S & F Solid PVC Door frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube all as specified and directed.

S & F factory made solid pane PVC moulded door shutter 28 to 30 mm thick (stiles) with 2, 4 or 6 raised panel design with 2 mm thick moulded PVC sheet on the front face and 2 mm thick plain colour PVC sheet on back face with particle board core as per specification all as specified and directed.

S & F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window / Ceosetory windows & other Frames / Chowkhat of size 65 x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2, modules of elasticity 900 N/ Sqmm2 and resistance to spread of flame of Class A category with property of being termite / borer proof, water/ moisture proof and fire retardan and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (including M.S. hold fast/ lugs or SS dash fasteners for fixing).

S & F Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650kg/cum and screw withdrawal strength of 1800 N (Face)& 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N / mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as specified and directed.

S & F Glazed and skeleton shutters, second class hardwood 30mm thick, open rebated and prepared to receive glass,gauze, etc. (without sash bars), edges of framing plain,chamfered or rounded. fitted with cut and mitred beads for securing glass,etc.sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) supplied and fitted to chowkats etc complete all as specified & directed

S & F Aluminium powder coated (minimum thickness of powder coating 50 micron) frame for partition, snap grid, doors, windows, ventilators with one or more rebates including joining cleat etc. for fixing complete all as specified and directed.

S & F Aluminium sliding windows shutters powder coated (minimum thickness of powder coating 50 micron) including powder coated main frame, three track (two for glazed and one for wire mesh) without sash bars including necessary jointing cleats, glazing clips, EPDM rubber packing, powder coated aluminium snap beading, screws, wheels, locking arrangments, suitable handles for sliding purpose, 4mm thick dark black tint plain glass and stainless steel wire mesh of dia 0.36mm and 1.40mm width of aperature, silicon chemical filling at gaps between section frame and wall surfaces complete all as specified and directed with the following sections of sliding window :- (a) Main Frame bottom section : Jindal section No 20798 (b) Main Frame top & sides section : Jindal section No 20678 (c) Sliding shutter section (handle ) : Jindal section No 20707 (d) Sliding shutter section for top & bottom : Jindal section No 20842 (e) Sliding shutter section for interlock : Jindal section No 21091

S & F Aluminium window and ventilator shutters powder coated (minimum thickness of powder coating 50 micron), side hung type without sash bars, aluminium sections not less than 1.5 mm thick sections including necessary joining cleats, glazing clips, EPDM rubber packing, dust guard, snap beading, screws, peg stays 150 mm long (1 No per leaf) hinges 100 mm long (2/3 Nos.) suitable handle (1 No) complete in all respect as specified & directed.

S & F Sheet glass, 5.5mm thick ordinary quality and glazing with oil putty in square exc 0.5 sqm in each pane all as specified & directed

S & F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples or steel screws all as specified & directed

S&F Butt hinges 100 mm long, medium weight, cold rolled mild steel all as specified & directed

S&F Aluminium anodised barrel tower bolt 200 mm long, extruded section all as specified & directed

S & F Aluminium anodised barrel tower bolt 150 mm long extruded section all as specified & directed

S&F extruded aluminium alloy anodised handle, fabricated type 150 mm long all as specified & directed

S&F extruded aluminium alloy anodised handle fabricated type 100 mm long fixed all as specified & directed

S & F Floor door stopper of aluminum alloy body and tongue, anodized with hard drawn steel spring and vulcanised rubber piece fixed in floor, over all length of cover plate 140mm all as specified and directed.

S & F in repairs vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) etc complete all as specified & directed

Supply and fix vitreous china wall mounted water closet element rimless including consealed flushing cistern and flush pipe with integrated jet flush, one piece including following accessoreis all as specified & directed :- (i) suitable PVC seat cover (II) Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook (iii)15mm bore dia PVC connection pipe 450mm long

S & F in repairs Vitreous china wash basin, white, flat back size 550X400mm including, CP brass waste coupling, waste pipe and cutting for and pinning in ends of brackets or erecting stand brackets all as specified & directed

Supply and fix in repairs Toilet paper holder with flat recessed type, stainless steel complete all as specified and directed.

Supply and fix wall mounted Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long all as speicfied and directed.

S & F stainless steel Grating doom 125 mm dia with waste hole all as specified and direceted

S & F in repair Bib taps 15mm dia bore, brass chromium plated round handle, screwed down, screwed for iron pipe and fixed all as specified and direceted

S & F in repair Pillar taps 15mm dia bore, brass chromium plated round handle, screwed down, screwed for iron pipe and fixed all as specified and directed.

S & F in repairs stop valves, 15mm dia brass chromium plated, screwed down, high pressure, with crutch or round handle screwed bolts ends for iron pipe or for unions and fixed all as specified and directed.

S & F Brass chromium plated wall mixer 15 mm dia, fancy type, for mixing hot & cold water, with L bend for over head shower connections screwed down for iron pipe and fixed all as specified and directed.

Supply and fix in repairs Swivel shower, of PTMT any colour for fixing with 15mm pipe. (Minimum weight 40gms) all as specified and directed.

S & F in repairs tubular brass chromium plated Towel rail 20 mm dia D type 60 cm long between flanges all as specified and directed.

S & F PVC connection 15mm dia length 450mm with PTMT nuts all as specified and directed.

S & F High density polyethylene pipes (HDPE) 50mm bore dia of pressure rating 6 kgf/sqcm fixed complete to walls, ceilings or in floors as drain out pipe etc.all as specified and directed.

Demolition and breaking up drain pipes (salt glazed ware, AC or reinforced concrete) set in cement mortar of size 100 mm/ 75 mm with all fittings all as specified and directed.

S&F PVC (SWR) pipes 75 mm dia, single socketed in any length with rubber ring joints, fixed in wall/ floor with necessary clamping where required all as specified and directed.

All as per item No. 44 herein before but 110 mm bore pipe complete all as specified and directed.

S & F (SWR) floor trap 75 mm dia outlet, plain with grating including jointing with solvent cement including fixing to existing pipe properly with solvent all as specified and directed

S & F PVC bends any radius suitable for 75 mm bore pipe all as specified and directed

S & F PVC bends with access door for 110 mm bore pipe all as specified and directed

S & F PVC (SWR) vent cowl 110 mm dia all as specified and directed

S&F in repair Soap dish, brass chromium plated and fixed all as specified and directed

Taking down 15 mm bore steel tubing and connections etc. all as specified and directed

Taking down 20mm bore steel tubing and connection etc. all as specified and directed

Taking down 25mm bore steel tubing and connection etc. all as specified and directed

Supply and laying in repair CPVC pipes 15mm nominal size tubes, SDR 11 including Plain & brass threaded special fittings fix to wall / ceiling or laying in floors including necessary cutting / Chases in wall / floor of any description and making good to match the adjoining surfaces complete all as specified & directed.

All as per item No 54 Herein before but of 20 mm nominal size complete all as specified and directed.

All as per item No 54 herein before but of 25 mm nominal size complete all as specified and directed.

M & L Preparation of new wood or wooden based surface not otherwise described, over 10 cm width or girth and applying two coats of synthetic enemal paint over a coat of pink primer all as specified specified & directed.

M & L Preparation of old treated wood or wooden based surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of Synthetic enamel paint (Ordinary tint) all as specified specified & directed.

M & L Preparation of new steel Surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats synthetic enamel paint over a coat of red oxide primer all as specified specified & directed.

M & L Preparation of old steel Surfaces of any description, not otherwise described, over 10cm in width or girth and applying one coat of Synthetic enamel paint (Ordinary tint) all as specified specified & directed.

S & F in repairs decorative type SS curtain rails 25mm dia with decorative type, fixing brackets, stops, rollers etc. all as specified & directed

Disconneting & Dismantling existing tanks of capacity exc 500 ltrs to 1000 ltrs and removing to store all as specified & directed

Supply, Hoisting and fixing 1000 Litre Rotational moulded polythylene water storage tanks (cylindrical vertical with closed top) double layer, hoisted and fixed in position all as specified in SSR Part I including Ball valve 25 mm dia high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed all as specified & directed

Taking down cement plaster including racking out joint hacking for key scrubbing down with water etc all as specified & directed

Material and labour 5 mm thick cement plaster in CM 1:3 for ceiling finished even & smooth without using extra cement complete all as specified and directed.

M & L rendering 15 mm thick cement mortar 1:4 over concrete or brick wall finished even & smooth without using extra cement complete all as specified & directed

Material and labour for applying Nitobond EP epoxy resin concrete bonding by M/s FOSROC chemicals or equivalent make chemical for bonding over old cement surfaces in facia, projections and RCC drops complete all as specified and as dircted.

Taking down existing tar felt water proofing treatment carefully and removing to a distanace n. exc 100 m all as directed

M & L PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in padding concrete in mixed with and including liquid water proofing compound at the rate of 0.40% by weight of cement all as specified and as directed

M&L for cleaning existing roof surfaces and brushing with neat cement slurry @3Kg/Sqm finished smooth the surface complete all as specified and as directed.

M & L rendering 10 mm thick cement mortar 1:3 mixed with conplast-X 42 11 C fosroc chemical (India) Ltd or equivalent make chemical water proofing compound 100 ML per bag of cement as specified by manufacturer instruction on concrete surfaces of roof and making the surfaces finished fair and even as in required slope for draining out the rain water all as specified and directed. Note - WPC (conplast-X 42 11 C fosroc chemical (India) Ltdmeasured and paid for separately

Supply only liquid water proofing compound conplast-X 42 11 C fosroc chemical (India) Ltd all as specified and directed.

M & L Preparing RCC roof slab by removing dust, dirt and applying oil bond bituminous primer @ 0.2Kg/Sqm and providing APP modified water proofing membrane weighting not less than 4 Kg/Sqm reinforced with non woven polyester matt weighing not less than 150 gms/sqm including minimum 10cm side over laps and 15cm end lap torch sealed and bonded as per detailed procedure on note No. 6 of TD AFB/TD/260/06 sheet 1/1 and applying a coat of blown hot bitumen 95/15 over a membrane at 1.20 kgs/sqm all as per detailed specification and procedure all as specified and as directed.

M & L Applying a coat of solar reflective bituminous aluminium paint over APP membrane on roof top surfaces at 0.10 kg/sqm all as specified and as directed.

Material and labour cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate as in roof kerbs or mud stops, rounded or chamfered on edges all as specified and directed.

M & L Mild steel TMT bars of 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M & L Mild steel TMT bars of 6mm to 8mm, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M & L Mild steel TMT bars 5mm dia and over upto and including 10mm dia TMT bars in stirrups, spaces and binders and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M & L formwork to soffits of suspended slab such as roof slabs, floor slabs, landings, plinth beam and similar work; not exceeding 200mm thick for fair finished flat surfaces (horizontal or slopping) at first floor roof projection for height upto 8.00m all as specified and directed

M & L reinforced cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, deck slabs and in shelves and the like, at height upto 8.00m complete all as specified and directed

M & L Machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations all as specified and directed

M & L Plain Cement concrete 1:3:6, type C-2, using 40 mm graded stone aggregate as in 50 mm thick subbases, floors & pavings and hard standing etc.all as specified and directed

Taking down wooden shutters exc 1sqm but n exc 2 sqm and refixing in the same opening after resecuring or easing and adusting all as specified and directed

S & F in repairs Alumimium Hat pegs, solid body, 125mm to 175 mm in length all as specified and directed

S & F Gun-metal, globe or gate valves, 25 mm dia with iron wheel head, screwed both ends for iron pipe and fixed all as specified and directed

S & F sink with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm all as specified and directed

S & F Sink cock with regular swinging spout with flange, 15mm dia brass chromium plated, screwed down, screwed for iron pipe all as specified and directed

M&L for 20mm thick granite work (table rubbed polished ) for in walls and floor and similar items in CM 1:4 including pointing in white cemnet 1:2 using marble dust with admixture of pigment to match with shade of granite over & including15mm thick screed bed in cement mortar 1:4 all as specified and directed

Dismantling timber scantlings under 40 sq. cm in section, unframed work and in any position all as specified and directed

Dismantling asbestos cement (Corrugated, semi corrugated, etc) sheets in roof coverings including ridges all as specified and directed

Dismantling wooden post, RCC posts or struts ( steel , RCC) any section including taking down embedded portion and making good as disturbed ground all as specified and directed

S & F Mild steel work as in posts and struts including cutting tops to shape as directed, drilling holes, notching for wire etc flat iron sinets (for secnring wire mesh etc) including all necessary drilling, bolting or riveting etc and similar work conforming to Fe-290 Gde E-165 all as specified and directed

Supply and fixing Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates etc of Fe 290 (Gde E-165, quality B) complete all as specified and directed.

S & F prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/clading to wall, fixed with self tapping screws all as specified and directed.

M & L Cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in coping including necessary form work, exposed surface of concrete shall be finished even and smooth without using extra cement all as specified and directed.

M & L Preparation of new plastered wall pillasters, cornices, etc., surfaces, rendering 3mm wall care putty in two coats & finished to smooth surface, applying two coats of Oil bound distemper over a coat of primer all as specified and as directed.

Material and labour complete removal of existing treatment and preparation of wall surfaces, rendering 3mm wall care putty in two coats & finished to smooth surface, and applying two coat of oil bound distemper over a coat of self primer etc complete all as specified and as directed.

M & L Preparation of new plastered surfaces of walls and applying Two coats of acrylic emulsion paint of Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives over and including priming coat of exterior primer applied complete all as specified and as directed .

M & L Complete removal of existing treatment & preparing the wall surfaces and applying Two coats of acrylic emulsion paint of Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives over and including priming coat of exterior primer applied complete all as specified and as directed .

M & L complete removal of existing treatment of ceiling surfaces and preparing the ceiling surfaces, rendering 3mm wall care putty in two coats finished to smooth surfaces, applying two coat of oil bound distemper over a coat of self primer all as specified & directed.

S & F for health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified & directed.

S & F framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified & directed.

Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in hard / dense soil all as specified & directed.

M & L cement concrete 1:2:4 type B-2 using 40 mm graded stone aggregate as in foundation and mass concrete etc all as specified

M & L Mild steel Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) including nut & bolts Fe 410 -W (Gde E- 250) quality A all as specified & directed

M & L Second class hard-wood scantlings in wrought surface, timber fixed all as specified & directed

S & F Veneered particle boards exterior grade, solid core, general purposes type, with face veneers of type 'BB', 12 mm thick fixed with screws to aluminium frame work all as specified & directed

S & F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed all as specified & directed

M & L Sheet glass, 5.50 mm thick ordinary quality and glazing with oil putty in square not exceeding 0.5 sq. m in each pane all as specified & directed

M & L Solar control film 50 micron reflective type sticked to glass panes as per instructions of manufacturers all as specified & directed

M & L Second class hard wood Plain fillets. square, rectangular or triangular in section, wrought, secured with nails or brads, exc 6 sq cm but n'exc 13 Sq cm in section all as specified & directed

M & L Second class hard wood Plain fillets. square, rectangular or triangular in section, wrought, secured with nails or brads, not exc 3 Sq cm in section all as specified & directed

M & L Prelaminated particle board, 18/19 mm thick interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work all as specified & directed

M & L Preparation of new wooden surfaces of any description, not exc 10 cm in width or girth and applying one coat of Staining & two coats of Varnishing all as specified & directed

M & L Collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, complete all as specified & directed

Supply and fix two way bib cock 15mm dia with side handle wall flange and aerator fancy type brass chromium plated screwed down, screwed for iron pipe and fixed all as specified & directed

S & F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

M & L for surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in hard dense soil complete all as specified and directed.

M&L cement concrete 1:4:8 type D2 using 40mm graded stone aggregate as in 75mm thick sub base under floor all as specified and directed.

M & L Sand filling under paver block/floors or in foundations including watering and consolidation all as specified and directed.

M & L Machine pressed precast concrete interlocking paver block, rubber moulded, any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment all as specified and directed.

Dismantling and taking out existing unserviceable XLPE cables of 25/16/10 Sqmm 2/4 Core from its existing location all as specified and directed. Note : Earthwork excavation will be measured & paid seperately

Supply, laying and testing XLPE Insulated cable, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sqmm 4 core all as specified and directed.

Supply, laying and testing XLPE Insulated cable, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sqmm 2 core all as specified and directed.

Excavation in trenches, not exceeding 1.50m wide and not exeeding 1.50m in depth for foundations, trenches of cable or pipe lines etc or and getting out in any types of soil complete all as specified and as directed.

Returning filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm in soil complete all specified and as directed.

Removing excavated materials (soil) to a distance not exceeding 50 meters and depositing where directed at a level not exceeding 1.5 meters above the starting point complete all specified and as directed.

S & F Double wall corrugated HDPE Pipe IS-16205, size inner dia 63 mm, outer dia 75 mm for cable protection in wall/under gorund laying of UG cables including SNAP-FIT Coupler and all fittings as required at site complete all as specified and as directed

Cutting the tar macadam road / hard standings for laying cable and excavating not exc 45 cmwide and not exc 60cm in depth and getting out including filing back soil and finishing with 200mm thick PCC 1:2:4 type B-2 complete all as specified and as directed

M & L Galvanised Iron pipes 40 mm dia. light grade with all fitting and fixed complete to poles/route/drains etc and ceillings or laid in floors all as specified and as directed

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendents, regulators, sockets, light fittings etc removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls, floors, etc to match with adjoining surfaces all as specified and as directed

Taking down carefully unserviceable main switches/DB's/Metal socket off size including MCBs from their position and removing materials from site all as specified and as directed

Taking down existing sub main wiring with aluminum conductor cable of size 2.5/4/6/10 sqmm with GI earth wire on and including wooden batten and removing materials from the site and making good distrubed surface of walls and and roofs complete all as specified and as directed

Material and Labour for point wiring with PVC insulated and unsheathed multi stranded 1.5 Sqmm FRLS copper Cable to be drawn in and including PVC casing capping 20/25 mm width complete with all accessories including M S sheet metal 1.2mm thick switch board or PVC rectangular switch board of suitable size to be fixed on wall including PVC insulated and unsheathed multi stranded 1.5 Sqmm FRLS copper cable as earth continuity conductor connected with common earth dolly complete all as directed

One light/bell point controlled by one, one way switch 5 Amp complete

One fan/exhaust fan point controlled by one, one way switch 5 Amp complete

One 3 pin switch socket outlet 5 amp independent

One 3 pin switch socket outlet 5 Amps on the same board with other switches

M & L Point wiring with PVC insulated and unsheathed multi stranded 2.5 Sqmm FRLS copper Cable to be drawn in and including PVC casing capping 20/25 mm width complete with all accessories including M S sheet metal 1.2mm thick switch board or PVC rectangular switch board of suitable size to be fixed on wall including PVC insulated and unsheathed multi stranded 2.5 Sqmm FRLS copper cable as earth continuity conductor connected with common earth dolly for 3 pin socket outlet 15 Amps independent complete all as directed

M & L Switch piano flush button, single pole, one way 5 Amp 240 Volts all as specified & directed

M & L Swith socket combination 2 in 1, 5 pin 5 Amp flush type 240 volts complete all as specified & directed

S & F switch socket combination multipurpose 2 in 1, 5 pin 5 /15 Amps universal type controlled by one switch complete all as specified & directed

M & L Ceiling rose surface backelite three terminal 240 volts complete all as specified & directed

S & F Fan regulator, electronic, step type , flush mounting 240 volts complete all as specified and as directed.

S & F Bell push, flush type, 5 Amps 240 volts all as specified and as directed.

S & F Bell Ding Dong AC, 230 volts complete all as specified and as directed.

S & F High efficacy integrated Batten (Double side connection) including LED Lamp 1x 20 w (Double side connection) T8 tube, surface/suspended mounting, in built driver and efficacy of 100lm/W single , suited for installation in T8 fitting with lamp holders etc. internally pre-wired and including connecting up with three core copper conductor cable all as specified and as directed.

S & F LED light fitting mirror type with high out put diffuser 2 feet, 10 W, 6500K, 220 Volts, AC decorative type, extruded polycarbonate, envornment friendly, energy efficient including connecting up with three core flexible copper conductor cable of suitable size all as specified and as directed.LUMILINEBS9WLED865SPCWH or equivalent make in CG / Bajaj / Philips

M & L Sub main wiring for building mounted security light with two single core 1.5 sq mm stranded copper PVC unsheathed insulated FRLS cable conductor 1100Volts grade drawn through & including suitable size of non-metallic PVC casing caping with one run 1.5 sqmm copper conductor FRLS cable as earth conductor fixed up in surface/ recessed as required, including connecting up complete all as specified and directed. NOTE:- Three runs of 1.5 sq mm cable copper conductor and one run of PVC conduit / casing caping shall be measured as one unit

M & L Sub main wiring with two single core 4 sq mm stranded unsheathed PVC insulated FRLS copper conductor cable 1100Volts grade drawn through & including suitable size of non-metallic PVC casing caping with one run 4 sqmm copper conductor FRLS cable as earth conductor and conduit accessories fixed up in surface/ recessed as required, including connecting up complete all as specified and directed. NOTE:- Three runs of 4 sq mm cable and and one run of PVC conduit / casing caping shall be measured as one unit

S & F sheet metal enclosure factory made double door for TPN DB 4 Way, 200 Amps rated bus bar suitable for fixing TPN MCB 40 Amps main incoming complete all as specified and as directed. Note : MCB TPN 40 Amps will be measured and paid seperately under relevant items.

S & F sheet metal enclosure Double Door factory made distribution board 240 volts SPN 8 way, 200 Amps rated bus bar complete all as specified and as directed.

M & L MCB TPN 40 Amps, C Curve, 415 volts, 50 Hz AC supply complete all as specified and directed.

M & L MCB SPN 6 to 32 Amps, C Curve, 240 volts, 50 Hz AC supply complete all as specified and directed.

M & L for MCB SP 06 to 32 Amps, C Curve, 240 volts, 50 Hz AC supply complete all as specified and directed.

M & L taking down ceilng fan, dismantling blades, preparation of entire ceiling fan surface by cleaning all dust etc including filling cavities with filler, spray painting with synthetic enamel paint, refixing ceiling fan and connecting up including provision of 3 core cable from ceiling rose to connector of fan complete all as specified and directed.

S & F LED street light of 25 Watt capacity made of pressure die cast aluminium housing with toughened glass, high power LEDs with option of secondary optic, IP-66 protection, SPD fixed on GI pipe 40 mm dia medium grade of 1.4 mtr length bracket made to shape including MS clamps 25 x 4 mm - 02 Nos with suitable size nut bolts washers complete all as specified and directed.

S & F Decorative 9 watt LED lamp B22 base with 9 Watt LED Bulb wall mounting light fitting with durable plastic body & designer mesh gold finish all as specified and directed.

M & L Earthing with galvanized iron earth plate electrode 60 cm x 60 cm x 6mm thick buried directly in ground vertically to a depth not less than 2.25m below normal ground level with top edge of earth plate at a depth not less than 1.5 M below normal ground level connected to and including GI strip 32x6 mm as earth lead by means of G I bolts and nuts, check nuts and washers etc & connected to equipment and earthing test point, earth dolly all as shown in elect plate No 3 of SSR Pt-I including all necessary earth work, excavation, PCC chamber cover with handle (PCC 1:2:4) and 20mm dia medium grade GI watering pipe, 40 mm dia light grade GI for protection of earth strip, wire mesh, funnel, charcoal dust & common salt, etc testing on completion all as specified and directed and

S & F Galvanised Iron strip 32 x 6 mm all as specified and directed.

M & L taking down exhaust fan, dismantling blades, preparation of surface by cleaning / filling cavities with filler & spray painting with synthetic enamel paint and refixing back exhaust fan, connecting up including provision of 3 core cable from ceiling rose to connector of fan all as specified and directed.

M & L Single pole and neutral enclosure with two pin and earth plug and socket complete with one single pole MCB 10 Amp including taking out the unserviceable plug and socket all as specified and directed.

Supply and laying galvanized iron pipe 40 mm dia, medium grade, with all fitting laid in trenches all as specified and directed.

Supply and lay galvanized iron pipe 25 mm dia medium grade, with all fitting laid in trenches all as specified and directed.

Supply and fix gun metal, globe or gate valves 40 mm bore with iron wheel head, screwed both ends for iron pipe all as specified and directed.

M & L Cutting of existing pipe 100/150 mm dia GI medium grade rising pipe for tapping of proposed inlet pipe including necessary fittings and acceessories of connection complete.

Construction of valve pit chamber of size 600x600x600mm internal size suitable for valves including necessary earth work excavation with following specification :- (a) PCC 1:4:8 type D2 foundation 100mm thick (b)Brick masonary 230mm thick wall in cement mortar 1:4 (c) PCC 1:2:4 type B1 for 75mm thick coping (d)rendering in CM (1:6) 15mm thick externally & internall full depth (e)Mild steel sheet cover 3.15mm thick on 40x40x6mm angle iron frame work with necessary locking arrangement (f) Two coats of synthetic enamel black paint over a coat of red oxide primer for steel surfaces

SCHEDULE A PART II ARBORICULTURE

ORNAMENTAL TREES :- Developing trees by excavating in post holes geting out , filling with red earth and manure in the proportion (3:1) and planting trees of different varieties 1.0 m to 1.5 m ht and 01 year old with proportionate girth in the filled up pits at a given distance etc; complete. (a) Mimusops Elengi (b) Peltaphorum pterocarpum (c) Jacaranda (d) CORDIA SEBESTENA (e) SPATHODEA

LAWN :- Developing lawn which includes necessary earth work excavation to a depth of 30 cm in any type of soil and removing the roots and vegitations from the soil to a distance not exc 50 mtr and levelling and applying of soil pesticides,filling with sweet earth mixed with manure 30mm including watering etc , dibbling of grass stellers of Bermuda grass, planting, rooting etc complete.

HEDGE :- Developing & Planting hedges by height of 30 cm and above, 30 cm apart saplings including excavation in trenches to a width of 45 cm and depth of 45 cm and filling the trenches with mixture of vermin compost / farm yard manure and red soil in proportion of 2:3 with necessary pesticides treatment all as specified and as directed including watering, manuring, necessary pesticides etc; complete for perenial plants. (a) IXORA, (b) HIBISCUS, (c) GOUDI - CHOUDI, (e) GULPHINIA, (f) PLUMBAGO, (g) NERIUM OLIANDE, (h) TECOMA CAPSENSIS, (j) ERANTHEMUM

Supply and fix 3 layer PP-R (Polypropylene random copolymer) 20 mm (outer dia) pipes SDR 7.4 (PN-16) stablized UV and antimicrobial fusion welded having thermal stability for hot and cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors / trenches etc all as specified and as directed.

Supply and fix 3 layer PP-R (Polypropylene random copolymer) 25 mm (outer dia) pipes SDR 7.4 (PN-16) stablized UV and antimicrobial fusion welded having thermal stability for hot and cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors / trenches etc all as specified and as directed.

Supply and fix 3 layer PP-R (Polypropylene random copolymer) 50 mm (outer dia) pipes SDR 7.4 (PN-16) stablized UV and antimicrobial fusion welded having thermal stability for hot and cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors / trenches etc all as specified and as directed.

Supply and fix Gun metal gate valve 20 mm dia with iron wheel head screwed both ends for iron pipe fixed all as specified and as directed.

Supply and fix Gun metal gate valve 50 mm dia with iron wheel head screwed both ends for iron pipe fixed all as specified and as directed.

Supply and fix water sprinklers galvanised steel having covering area 40 feet all as specified and directed.

SCHEDULE A PART III MAINTENANCE OF NEWLY DEVELOPED PLANTS

Maintenance of newly developed plants/ grass/ trees provided vide Sl. Item No. 168 to 170 of BOQ by engaging well experienced Gardener for a minimum of four days in a month at regular intervels as directed by Engineer in charge. The maintenance shall includes the following:- (a) Periodical de-weeding of unwanted vegetation growth around the plants/ lawn area, (b) Watering all the plants/ lawn areas as required for proper growth, (c) Periodical Lawn mowing, (d) Periodical prunning the Hedges/ Shrubs and (e) Treating the plants and soil with required manure, pesticides and fertilizers including necessary topping of red earth.

PURVIK CONSTRUCTIONS

RAJENDRA KRISHNA SARAF

Raghu M Contractor