Carrying out Zone works for period ending 30.06.2027 on Zone No-8 (Kaliwari Ex.) to New model colony & DSL shed at Izatnagar.

Item Breakup - B-N.S-Items.

Hire charges of TATA 407 or equivalent for Day local shifting.

Hydraulic Excavator of 1 cum bucket.

Hire and running charges of light crane.

Tractor with trolley. Total 717923.80

Item Breakup - C-N.S-Items.

Artisan (Blacksmith 2nd class, Carpenter 2nd Day class, Mason 2nd class & Painter Etc.).

Helper (Technician) Total 4012374.00

Item Breakup - D-N.S-Items.

Portland Cement (OPC-43 Grade).

Vitreous china pedestal type water closet

Oxidized mild steel sliding door bolt 300x16 Each mm. IZZATNAGER DIVISION-ENGINEERING/NORTH EASTERN RLY

Oxidized mild steel sliding door bolt 250x16 Each mm.

Oxidized mild steel tower bolt (barrel type) Each 200x10 mm.

Oxidized mild steel tower bolt (barrel type) Each 150x10 mm.

Oxidized mild steel handles 125 mm.

Oxidized mild steel handles 100 mm.

Oxidized mild steel handles 75 mm.

Block board construction flush door with Sqm commercial ply on both faces 30 mm.

Coarse sand (zone III).

Synthetic enamel paint in black or chocolate Litre shade.

Synthetic enamel paint in all shades except Litre black or chocolate shade.

100% Premium acrylic dirt Silicone additives exterior paint.

Structural steel such as tees, angles channels Quintal and R.S. joists.

Mirror of superior make glass 60x45 cm.

Vitreous China pedestal for wash basin.

G.I. Union 15 mm nominal bore.

G.I. Union 20 mm nominal bore.

G.I. Union 25 mm nominal bore.

Polyethylene water storage tank with cover Litre and suitable locking arrangement.

Vitreous China flat back wash basin 550x400 Each mm.

Hydraulic door closer tubular type Aluminum Each section body.

Vitreous China orisha type W.C. pan of size Each 580 mm.

Floor mounted white vitreous China double Each trap symphonic WC with 10-liter cistern and all fittings & fixtures, seat cover etc.

12 mm commercial ply.

Unplasticized P.V.C. connection pipe with Each brass union 45 cm long 15 mm bore.

H.P. or L.P. ball valve with polythene floats: Each 15 mm dia.

H.P. or L.P. ball valve with polythene floats: Each 20 mm dia.

H.P. or L.P. ball valve with polythene floats: Each 25 mm.

C.P. brass waste 32 mm.

C.P. brass waste 40 mm each.

Stainless steel butt hinges 125x64x1.9 mm 10 Nos. IS: 12817 marked.

Stainless steel butt hinges 100x58x1.9 mm 10 Nos. IS: 12817 marked.

Stainless steel butt hinges 75x47x1.8 mm IS: 10 Nos. 12817 marked.

Stainless steel kitchen sink - without drain Each board 610x460 mm bowl depth 200 mm.

15 mm PTMT bib cock.

15 mm PTMT bib cock with flange (fancy).

15 mm PTMT bib cock long body with flange.

PTMT pillar cock.

U-PVC pipes (working pressure 4 kg / cm²) Metre Single socketed pipe 75 mm dia. IZZATNAGER DIVISION-ENGINEERING/NORTH EASTERN RLY

U-PVC pipes (working pressure 4 kg / cm²) Metre Single socketed pipe 110 mm dia.

UPVC bend 87.5° 75 mm bend.

UPVC bend 87.5° 110 mm bend.

Semi Rigid PVC waste pipe for sink and wash Each basin 32 mm dia with length not less than 700 mm i/c PVC waste fittings.

Semi Rigid PVC waste pipe for sink and wash Each basin 40 mm dia with length not less than 700 mm i/c PVC waste fittings.

Flexible (coil shaped) PVC waste pipe for sink Each and wash basin 32mm dia with length not less than 700 mm i/c PVC waste fittings.

Flexible (coil shaped) PVC waste pipe for sink Each and wash basin 40 mm dia with length not less than 700 mm i/c PVC waste fittings.

Flushing Cistern P.V.C. 10 liter capacity (low Each level) (White) (with fittings, accessories and flush pipe)

Galvanized wire mesh of average width of Sqm aperture 1.4 mm and nominal dia of wire 0.63 mm.

8 mm dia C.P. Brass/ S.S. Jet with flexible Each tube up to 1 meter long with S.S. triangular plate for European type W.C.

Turpentine oil.

15 mm dia PTMT stop cock (male thread).

20 mm dia PTMT stop cock.

White plastic seat (solid) with lid Total 981151.08

Item Breakup - E-N.S-Items.

Providing and fixing PVC false ceiling tiles of Sqm required size in true horizontal/vertical levels suspended on interlocking MS tube grid of section 25mmx25mmx1.2mm. PVC ceiling tiles should have a section size of 6mmx250mm with wall thickness of 0.8mm. Perimeter edge of tiles shall be covered by extruded PVC corner Beeding of size 9mm x 8mm x1 mm. MS tube section grid should be properly secured with walls and anchored to roof with the help of suitable clamps with complete work.

Providing & fixing of coloured galvalume plain Metre sheet flashings at ridges / apex junctions of roofing cladding, cover / corner / barge pieces etc. in required shape, colour duly fixed with stitching screws (with EPDM washers etc. as per site requirement) 601mm to 1200 mm width (girth)

Supplying, erecting and laying in position 3 Sqm mm thick plain embraced polycarbonate sheets of appd. & transparency on the roof in the profile to match the profile of roofing sheets etc.

Providing ,fabricating ,fitting & fixing in Sqm position 6 mm thick toughened glass in doors ,window & north lights at all levells including cutting etc. IZZATNAGER DIVISION-ENGINEERING/NORTH EASTERN RLY

Providing hand packed dry flat brick flooring, Sqm class designation 7.5 (FPS Bricks), excluding pointing with joints filled with sand over a bed of dry sand (ordinary) of average thickness 25 mm including ramming sub grade (Flat Brick).

Providing and applying water proofing Sqm treatment to RCC roof slab etc. by application of two coats of cement slurry mixed with water proofing compound (Acrylic based polymer, solid content 30% ± 3, pH >7) in the ratio of 1:2 (1 part of water proofing compound :2 parts of cement by weight), followed by tow coats of single component moisture cured polyurethane based elastomeric water proofing coating conforming to ASTM C-836-89 having tensile strength 3.1 N/mm² . topping layer of 25 mm thick cement concrete 1:2:4 (to be paid separately) to be laid.

Sealing of cracks in roofs by making a V- Metre shaped groove and filling the groove with acrylic-strene based copolymer waterproofing compound.

Supplying & installation of wind driven Each turbine ventilator with FRM base to match profile of aluminum galvanized corrugated (GC) roofing sheets of SVS make or similar of throat/elbow diameter 24'' to be fixed on the roof of the sheds. Installation shall be done in such manner that the roof remains watertight and leak proof.

Supplying, Erecting & fixing in position 150 Metre mm dia PVC Rainwater pipes of appd. Quality wherever required. Complete inside the ways of diesel shed up to 9.0 mtr. height in shut down period complete with all labour.

Brick work with Railway bricks in foundation cum and up to plinth with 1:6 cement mortar (1 cement: 6 Coarse sand).

Brick work with Railway bricks above plinth cum level and up to floor V level in all shapes and size with 1:6 cement mortar (1 cement: 6 Coarse sand).

Supplying, fabricating and erecting valley Metre gutter having 1.00 meter width, made out of 0.91mm thick aluminum sheets, the joints shall be made by aluminum welding to make water tight including supplying manufacturing and fixing brackets made out of MS flats 50mm x 6mm at the spacing of 75 cm center to center. The rate will be including supply of all materials, labours, tools, plants, equipments, scaffolding and staging etc. Complete work shall be carried out as directed by engineer in charge

Providing and applying Asian Royale play Sqm metalic finish texture paint on interior wall surface including making proper base, one coat of primer of approved quality and finishing coat by two coat of acrylic emulsion paint of approved quality, colour & shade complete in all respect, labour, material, T&P, all taxes, GST etc.as per direction of Engineer incharge at site. IZZATNAGER DIVISION-ENGINEERING/NORTH EASTERN RLY

Providing and fixing permanently colour Sqm coated trapezoidal profiled sheet of depth 28- 30mm at 195- 205mm pitch distance with precisely engineered "Rib & Flute" design. Profiled sheets shall be min. 0.5mm TCT/0.45mm BMT high tensile zinc aluminium alloy coated zincalume /galvalume steel sheet (550 mpa yield strength) having a coating of mass of 150gsm zinc aluminium coating AZ- 150 total on both sides as per, AS 1397:1993 finished with 20 microns approved colour coating of Silicon Modified Polyester (SMP) / Super Polyester paint coat on exposed surface over a primer coat of 5 microns a back coat of 5 microns on reverse side over a 5 microns primer coat. There shall be 2 small ribs/square flutes between profiles for providing additional strength. The sheet to be fixed over the purlins with hexagonal head self drilling suitable fasteners with neoprene / EPDM washer on crests of the sheet

Supply of WEEDICIDE Glyphosate medicine. Total 1193346.89

Item Breakup - F-N.S-Items.

Drilling of bore well for specified depth in all Metre types of soil and rock mechanically with all contractor's tools, plants, materials and labour up to 75 meters For (150mm dia).

Providing and lowering 110 mm PVC pipe in Metre boring.

Shrouding of tube well bore by pea gravel of cum Lalkuan size 1.5 mm to 4.7 mm including supply of pea gravel.

Development of Tube Well by using 350 PSI Hour compressor.

Development of Tube Well by OP unit of 3 Hour cusec capacity and testing of tube well for yield.

Taking out old hand pump machine and Each lowering in another new boring with repairing and changing of leather bucket, sheet valve etc. (Exc. The cost of material changed).

Providing and fixing rectangular counter wash Each basin with 15mm dia CP brass pillar tap of MARC, equivalent make of superior quality heavy type of approved design including all lead, lifting at any ht. Loading unloading all taxes, labour charges, material, T & P levies etc. Complete job nothing extra will be paid whatsoever the case may be as per direction of engineer in charge/ architect at site.

Supplying and fixing Health faucet jaguar or Each similar make IZZATNAGER DIVISION-ENGINEERING/NORTH EASTERN RLY

Supplying, Sinking & installation of 40 mm Each hand pump No.6 ordinary hand pump set comprising the following of approved quality complete assembly having depth of 30 M as per IS:9301. Hand pump No.6 with plunger, barrel, handle, head, piston rod, leather bucket, base, valve weight G.I. Screws, bolts & nuts as per IS :1363 /1967, leather seat valve, 40 mm dia C.I. Cutter with steel plug, 40 mm dia G.I. Sockets & 40 mm dia G.I. Pipe medium quality v) Brass strainer mesh type "Dinco" or equivalent made of long slotted medium B class G.I.pipes with 80- mesh brass wire net wrapping around the perforated pipe and jacketed by 26 / 28 SWG brass perforated sheet. 40 mm dia x 2 lengths each of 1.83 m connected with G.I. socket Total 137349.02

Item Breakup - G-N.S-Items.

Removal of trees with roots from the wall.

Operation of all required sluice valves at Each/month Colony/ station including supplying valvemen to provide timely water supply in Railway colony both in day and night shift i/c visiting all pump houses to see whether they are runningor not and informing to SSE/W. Visiting Over head tanks to see they are filled full or not, also visitng all times during valve operation in colony to water is being supplied in Rly. Qtrs and remain all time alert complete with all manpower,T&P,GST taxes etc Total 327819.78