Loading
Loading…
Loading…
Tender Value
₹3.2 Cr
EMD Value
₹3.1 L
Closing Date
5 Jan 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
CTL
15 conditions · 4 needing a document upload
The Minimum Eligibility Criteria for open tenders costing Rs.50 Lakhs & above is given below:-Financial Eligibility Criteria: The tenderer must have minimum average annual contractual turnover of V/N or V whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
Similar Nature of work- "Any type of Civil Engineering work viz-building up to G+4 and structural work, pipe line underground and overhead tanks, foundation treatment works in any Railway embankment/cutting, any earthwork, cover over platform, bore wells, level crossing works including lifting of barriers, cement concrete aprons work, etc."
17 conditions
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Documents to be Submitted Along with Tender: (i) The tenderer shall clearly specify whether the tender is submitted on his own (Proprietary Firm) or on behalf of a Partnership Firm / Company / Joint Venture (JV) / Registered Society / Registered Trust / Hindu Undivided Family (HUF) / Limited Liability Partnership (LLP) etc. The tenderer(s) shall enclose the attested copies of the constitution of their concern, and copy of PAN Card along with their tender. Tender Documents in such cases are to be signed by such persons as may be legally competent to sign them on behalf of the firm, company, association, trust or society, as the case may be.
Following documents shall be submitted by the tenderer
(a)Sole Proprietorship Firm: (i) All documents in terms of Para 10 of the Tender Form (Second Sheet) of General Conditions of Contract-2022 and Para 1.0 of Minimum Eligibility Criteria of Instructions/Special Conditions to the tenderers of tender document and as amended/corrected upto latest correction slip.
(b)HUF: (i) A copy of notarized affidavit on Stamp Paper declaring that he who is submitting the tender on behalf of HUF is in the position of 'Karta' of Hindu Undivided Family (HUF) and he has the authority, power and consent given by other members to act on behalf of HUF. (ii) All other documents in terms of Para 10 of the Tender Form (Second Sheet) of General Conditions of Contract-2022 and Para 1.0 of Minimum Eligibility Criteria of Instructions/Special Conditions to the tenderers of tender document and as amended/corrected upto latest correction slip.
(c)Partnership Firm: (i) All documents as mentioned in Para18 of the Tender Form (Second Sheet) of General Conditions of Contract-2022 andPara17 of the Tender Form (Second Sheet) of Instructions to the tenderers and conditions of tender of tender document and as amended/corrected upto latest correction slip
(d)Joint Venture (JV): All documents as mentioned in Para 17 of the Tender Form (Second Sheet)of General Conditions of Contract-2022 and Para16 of the Tender Form (Second Sheet) of Instructions to the tenderers and conditions of tender of tender document and as amended/corrected upto latest correction slip.
(e)Company registered under Companies Act2013: (i) The copies of MOA (Memorandum of Association) / AOA (Articles of Association) of the company (ii) A copy of Certificate of Incorporation (iii)A copy of Authorization/Power of Attorney issued by the Company (backed by the resolution of Board of Directors) in favour of the individual to sign the tender on behalf of the company and create liability against the company. (iv)All other documents in terms Para 10 of the Tender Form (Second Sheet) of General Conditions of Contract-2022 and Para 1.0 of Minimum Eligibility Criteria of Instructions/Special Conditions to the tenderers of tender document and as amended/corrected upto latest correction slip.
(f)LLP (Limited Liability Partnership): (i)A copy of LLP Agreement (ii)A copy of Certificate of Incorporation (iii)A copy of Power of Attorney/Authorization issued by the LLP in favour of the individual to sign the tender on behalf of the LLP and create liability against the LLP. (v)An undertaking by all partners of the LLP that they are not blacklisted or debarred by Railways or any other Ministry / Department of the Govt. of India from participation in tenders / contracts as on the date of submission of bids, either in their individual capacity or in any firm/LLP or JV in which they were / are partners/members. Concealment / wrong information in regard to above shall make the contract liable for determination under Clause 62 of the Standard General Conditions of Contract. (v)All other documents in terms of Para 10 of the Tender Form (Second Sheet) of General Conditions of Contract-2022 and Para 1.0 of Minimum Eligibility Criteria of Instructions/Special Conditions to the tenderers of tender document and as amended/corrected upto latest correction slip.
(g)Registered Society & Registered Trust: (i) A copy of Certificate of Registration (ii) A copy of Memorandum of Association of Society/Trust Deed (iii) A copy of Power of Attorney in favour of the individual to sign the tender documents and create liability against the Society/Trust. (iv) Acopy of Rules & Regulations of the Society (v) All other documents in terms of Para 10 of the Tender Form (Second Sheet) of General Conditions of Contract- 2022 and Para 1.0 of Minimum Eligibility Criteria of Instructions/Special Conditions to the tenderers of tender document and as amended/corrected upto latest correction slip. (iii)If it is NOT mentioned in the submitted tender that tender is being submitted on behalf of a Sole Proprietorship firm / Partnership firm / Joint Venture / Registered Company etc., then the tender shall be treated as having been submitted by the individual who has signed the tender. (iv)After opening of the tender, any document pertaining to the constitution of Sole Proprietorship Firm / Partnership Firm / Registered Company/ Registered Trust / Registered Society / HUF/LLP etc. shall be neither asked nor considered, if submitted. Further, no suo moto cognizance of any document available in public domain (i.e., on internet etc.) or in Railway's record/office files etc. will be taken for consideration of the tender, if no such mention is available in tender offer submitted. (v) A tender from JV shall be considered only where permissible as per the tender conditions. (vi) The Railway will not be bound by any change of power of attorney or in the composition of the firm made subsequent to the submission of tender. Railway may, however, recognize such power of attorney and changes after obtaining proper legal advice, the cost of which will be chargeable to the Contractor.
Sole proprietor/a company or a partnership firm/joint venture (JV)/registered society/registered trust / HUF/LLP, Power of Attorney etc: The tenderer whether sole proprietor/ a company or a partnership firm/ registered society / registered trust / HUF / LLP etc if they want to act through agent or individual partner(s), should submit along with the tender, a copy of power of attorney duly stamped and authenticated by a Notary Public or by Magistrate in favour of the specific person whether he/they be partner(s) of the firm or any other person, specifically authorizing him/them to sign the tender, submit the tender and f\lather to dealwith the Tender/ Contract up to the stage of signing the agreement except in case where such specific person is authorized for above purposes through a provision made in the partnership deed / Memorandum of Understanding / Article of Association /Board resolution, failing which tender shallbe summarily rejected. A separate power of attorney duly stamped and authenticated by a Notary Public or by Magistrate in favour of the specific person whether he/they be partner(s) of the firm or any other person, shall be submitted after award of work, specifically authorizing him/them to deal with allother contractualactivities subsequent to signing of agreement, if required. Note: A Power of Attorney executed and issued overseas, the document will also have to be legalized by the Indian Embassy and notarized in the jurisdiction where the Power of Attorney is being issued. However, the Power of Attorney provided by Bidders from countries that have signed the Hague Legislation Convention 1961 are not required to be legalized by the Indian Embassy if it carries a conforming Appostille certificate
1. Proposed work for improvement to drainage arrangement & repair works at LHS in lieu of LC No.93,94,97,100,105,106,109&110 on Sewagram -Butibori section under jurisdiction of ADEN(S) Nagpur. (UID- 01.03.30.25.3.52.022) 2. Proposed balance work of LHS and improvement of drainage arrangement for LHS in lieu of LC no. 284, 287 D & E on Narkher-Nagpur section. (UID-01.03.30.25.3.52.028) 3. Proposed balance work of LHS and improvement of drainage arrangement for LHS in lieu of LC no. 290A, 291, 292 on Narkher - Nagpur section. (UID- 01.03.30.25.3.52.026)
DRMWNGP-89-2025-01~CR
DRMWNGP-89-2025-01
Open
Works - General
6 Months
Nagpur, Maharashtra
₹0
₹3.1 L
5 Jan 2026
12 Dec 2025
22 Dec 2025
52 items across 3 schedules · ₹1,38,28,048.5 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | Disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of Engineer-in-charge. | cum | 500 | 494.1 | 2,47,050 |
| 2 | All kinds of soil | cum | 190 | 177.5 | 33,725 |
| 3 | Hard rock (requiring blasting) | cum | 60 | 874.4 | 52,464 |
| 4 | Ordinary rock | cum | 150 | 632.95 | 94,942.5 |
| 5 | 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 60 | 7,878.5 | 4,72,710 |
| 6 | 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 21 | 7,294.7 | 1,53,188.7 |
| 7 | 1:3:6 (1 cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 15 | 9,311.4 | 1,39,671 |
| 8 | Retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc. | Sqm | 600 | 842.5 | 5,05,500 |
| 9 | 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 170 | 9,045.75 | 15,37,777.5 |
| 10 | Foundations, footings, bases of columns, etc. for mass concrete | Sqm | 50 | 392.15 | 19,607.5 |
| 11 | Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc. | Sqm | 180 | 842.5 | 1,51,650 |
| 12 | Thermo-Mechanically Treated bars of grade Fe- 500D or more. | Kg | 6050 | 107.85 | 6,52,492.5 |
| 13 | Thermo-Mechanically Treated bars of grade Fe- 500D or more. | Kg | 5800 | 99.65 | 5,77,970 |
| 14 | Concrete of M30 grade with minimum cement content of 350 kg /cum | cum | 47 | 9,655.7 | 4,53,817.9 |
| 15 | Hot finished welded type tubes | Kg | 1000 | 194.4 | 1,94,400 |
| 16 | 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacturer's specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete. | Sqm | 800 | 978.45 | 7,82,760 |
| 17 | 62 mm thick cement concrete flooring with concrete hardener topping, under layer 50 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate, 6 mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacture's specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete. | Sqm | 520 | 1,056.15 | 5,49,198 |
| 18 | Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture | Sqm | 7000 | 226.25 | 15,83,750 |
| 19 | Cleaning of under ground sump, Over Head R.C.C. Tank ( independent staging) including disposal of slit and rubbish, all as per direction of Engineer-in-Charge. The cleaning shall consist following operations:-(i)Tank shall be emptied of water by pumping & bottom shall be cleaned of silt and other deposits.(ii) Entire surface area of the sump shall then scrubbed thoroughly with wire brush etc. and pressure washed with water.(iii) Chlorination of RCC internal surface by liquid chlorine.(iv) The treated surface shall be dried using air jetting and all loose particles shall be removal from the surface.(v) Finally the surface shall be treated with ultraviolet radiation etc.as per direction of Engineer-in-Charge. | Sqm | 1000 | 84.85 | 84,850 |
| 20 | Nominal concrete 1:3:6 or richer mix (including equivalent design mix) | cum | 100 | 2,434.25 | 2,43,425 |
| 21 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer- in-charge, beyond 50 m initial lead, for all leads including all lifts involved. | cum | 300 | 263.95 | 79,185 |
| 22 | Moorum | cum | 150 | 768.25 | 1,15,237.5 |
| 23 | Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size) in pavements, laid to required slope and camber in panels as required including consolidation finishing and tamping complete. | cum | 37 | 7,993.8 | 2,95,770.6 |
| 24 | Cement concrete prepared with batch mixing machine | cum | 50 | 10,529.35 | 5,26,467.5 |
| 25 | Providing and fixing Glow studs of size 100x20 mm made of heavy duty body shall be moulded ASA (Acrylic styrene Acrylonitrile ) or HIP (High impact polystyrene) or ABS having electronically welded micro- prismatic lens with abrasion resistant coating as approved by Engineer in charge. The glow stud shall support a load of 13635 kg tested in accordance with ASTM D4280. The slope of retro- reflective surface shall be 35 (+/-5) degress to base .The reflective panels on both sides with at least 12 cm of reflective area up each side. The luminance intensity should be as per the specification and shall be tested as described in ASTM I: 809 as recommended in BS: 873 part 4 : 1973. The studs shall be fixed to the Road surface using the adhesive conforming to IS, as per procedure recommended by the manufacturer complete and as per direction of Engineer-in-charge. | Each | 500 | 206.3 | 1,03,150 |
| 26 | Overhead informatory road signage | Sqm | 50 | 5,879.9 | 2,93,995 |
| 27 | Providing and applying 2.5 mm thick road marking strips (retro- reflective) of specified shade/ colour using hot thermoplastic material by fully/ semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of Engineer-in-charge and accordance with applicable specifications. | Sqm | 300 | 747.8 | 2,24,340 |
| 28 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured to calculate volume for payment). (Precast C.C. kerb stone shall be approved by Engineer-in- charge). | cum | 80 | 10,117.6 | 8,09,408 |
| 29 | Made of G.I. wire of dia 4 mm | Sqm | 20 | 1,017.8 | 20,356 |
| 30 | Supplying and stacking of hard stone (for stone pitching) 22.5 cm thick at site. | cum | 110 | 995.85 | 1,09,543.5 |
| 31 | Dry stone pitching 22.5 cm thick laid in courses and required profile with hammer dressed stones having no side less than 15 cm, with minimum depth of 20 cm including preparing the bedding surface etc. all complete. (Payment for Stone to be made separately). | Sqm | 500 | 659.05 | 3,29,525 |
| 32 | Moorum | Sqm | 500 | 76.3 | 38,150 |
| 33 | 80 mm thick C.C. paver block of M-30 grade with approved color design and pattern. | Sqm | 500 | 1,091.5 | 5,45,750 |
| Schedule total | ₹1,20,21,827.7 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .