CONSTRUCTION OF ROAD FROM BHANDRA MAIN ROAD TO HARKHU SAHU FIELD VIA TANGRA BHANDRA BLOCK BHANDRA DIST LOHARDAGA

Clearing grass and removal of rubbish up to a distance of 50 metres outside the periphery of the area as per Technical Specification Clause 201. S.O.R. Item No. 2.02

Construction of sub-grade and earthen shoulders with approved material obtained from Borrow pits with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of Table 300-2. S.O.R. Item No. 3.18

Construction of granular sub-base by providing close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with front end loader at OMC, and compacting with vibratory roller to achieve the desired density, complete as per

Plain/Reinforced cement concrete in sub-structure complete as per drawing and Technical Specifications

Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing 801.)

Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom, backfilling the excavation earth to the extent required a nd utilising the remaining earth locally for road work.

Plain/Reinforced cement concrete in open foundation complete as per drawing and Technical Specifications

Stone Masonry Work in Cement Mortar 1:3 in Foundation complete as per Drawing and Technical Specifications. Random Rubble Stone Masonary in C.M. (1:3) in foundation S.O.R. Item No. 12.07 (B)

Stone masonry work in cement mortar 1:3 for substructure complete as per drawing and Technical Specifications Random Rubble Masonry Work in Cement Mortar 1:3 in S/S S.O.R. Item No. 13.04 A

Plain/Reinforced Cement Concrete on Top of Wall complete as per Drawing and Technical Specifications. (P.C.C. Grade M-15) S.O.R. Item No. 13.05 A (p)

Providing weep holes in Brick masonry/Plain/ Reinforced concrete abutment, wing wall/ return wall with 100 mm dia AC pipe, extending through the full width of the structure with slope of 1V :20H towards drawing foce. Complete as per drawing and Technical Specifications S.O.R. Item No. 13.08

Pointing with cement mortar (1:3 ) on brick or stone work in substructure as per Technical Specifications S.O.R. Item No. 13.02

Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom, backfilling the excavation earth to the extent required a nd utilising the remaining earth locally for road work. Ordinary Soil Mechanical Means. S.O.R. Item No. 3.13 (i) B

Providing and laying of dry rubble flooring complete as per drawings and technical specifications Clause 2506 S.O.R. Item No. 16.09

Plain/Reinforced cement concrete in open foundation complete as per drawing and Technical Specifications (P.C.C. Grade M-15) S.O.R. Item No. 12.08 A Case-II

Stone Masonry Work in Cement Mortar 1:3 in Foundation complete as per Drawing and Technical Specifications.. Square Rubble Coursed Rubble Masonry (first sort) in C.M. (1:3) in foundation S.O.R. Item No. 12.07 A

Plain/Reinforced cement concrete in sub structure complete as per drawing and Technical Specifications (P.C.C. Grade M-15) S.O.R. Item No. 13.05 A (p)

Furnishing and Placing Reinforced/ Prestressed cement concrete in sub- structure as per drawing and Technical Specification (R.C.C. Grade M-25 in Deck Slab) S.O.R. Item No. 13.5 F (p)

Supplying, fitting and placing HYSD bar reinforcement in sub-structure complete as per drawing and technical specifications S.O.R. Item No. 13.06

Plastering with cement mortar (1:3 ) on brick work in sub-structure as per Technical Specifications. S.O.R. Item No. 13.03

Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces S.O.R. Item No. 8.08

ADD GST(18%)

LABOUR CESS

Please Enable Macros to View BoQ information