Construction of Govt. Veterinary Poly Clinic at Village Beholi in District Kurukshetra.

Amount

1 : - Earth work in excavation in foundations, trenches, etc. in all kinds of soils, not exceeding 2 meters depth including dressing of bottom and sides of trenches stacking the excavated soil, clear from the edge of excavation and subsequent filling around masonry, in 15 cm layers with compaction, including disposal of all surplus soil, as directed with in a lead of 30 meters. (HSR. 6.6)

2 : - Earth filling under floors with surplus soil excavated from foundation and taken only from outside the building plinth, in 15 cm layers including ramming watering and consolidating lead upto 30 meters. (HSR 6.13)(a)

3 : - Cement concrete 1:8:16 with stone aggregate 40 mm nominal size in foundation and plinth (HSR 10.28)

4 : - Cement concrete 1:4:8 with stone aggregate 20 mm nominal size in foundation and plinth (HSR 10.38)

5 : - Cement concrete 1:2:4 with stone aggregate 20 mm nominal size in first storey upto 4 metres above plinth level (HSR 10.59)

6 : - Pre-cast cement concrete 1:11/2:3 with stone aggregate 20mm nominal size in Kerbs and the like items, finished smooth with 6mm thick cement plaster 1:3 on exposed surface including form work, placing and fixing in position, complete as per (HSR 10.77 + 10.95a)

7 : - Pre-cast factory manufactured cement concrete 1:11/2:3 with stone aggregate 20mm nominal size in tiles & channels and the like items, finished smooth with 6mm thick cement plaster 1:3 on exposed surface including form work, placing and fixing in position, complete as per (HSR 10.78 + 10.95a)

8 : - Cement concrete 1 :11/2 :3 with stone aggregate 20 mm nominal size for reinforced concrete work in shelves excluding steel reinforcement, but including centering and shuttering, laid in position, complete in all respects. (HSR 10.81+ 10.95 (a) First Storey

9 : - Cement concrete 1:11/2:3 with stone aggregate 20 mm nominal size for reinforced concrete work in slabs with inclination not exceeding 25 degree with horizontal, excluding steel reinforcement, but including centring and shuttering, laid in position, complete in all respects. (HSR 10.82 + 10.95 (a) First storey

: - Second Storey

: - Third storey/mumty & machine room

10 : - Cement concrete 1:11/2:3 with stone aggregate 20 mm nominal size for reinforced concrete work for walls exceeding 20 cm thickness (straight and curved) beams, girders, stairs, columns, (square or rectangular) battens and lintels etc. excluding steel reinforcement but including centering and shuttering, laid in position complete in all respects. (HSR 10.86 + 10.95 (a)) First storey

: - Second Storey

: - Third storey/mumty & machine room

11 : - Cement concrete 1:1½:3 with stone aggregate 20 mm nominal size for reinforced concrete work for circular or curved columns excluding steel reinforcement but including centring and shuttering, laid in position complete in all respects. (HSR 10.88 + 10.95 (a) First storey

: - Second Storey

: - Third storey/mumty & machine room

12 : - Cement concrete 1:11/2:3 with stone aggregate 20 mm nominal size for reinforced concrete work in fascias parapets and other thin vertical sections, not covered by item nos. 10.82, 10.86 to 10.88 not exceeding 10 cm thickness excluding steel reinforcement but including centering and shuttering, laid in position, complete in all respects. (HSR 10.89+10.95(a)) Second Storey

: - Fourth storey/mumty & machine room

13 : - Cement concrete 1:11/2:3 with stone aggregate 20 mm nominal size for reinforced concrete work in footings, strips, foundations, beams, rafts, pedestals and approach slabs of bridges etc. excluding steel reinforcement and including centering and shuttering, laid in position, complete in all respects. (For works upto 1.5 meters below ground level (HSR 10.90 + 10.95 a)

14 : - Damp proof course 40 mm thick of cement concrete 1:2:4 using stone aggregate 20 mm nominal size with 2 coats of bitumen 20/30 preparation at 1.65 kg per sqm laid hot and sanded (HSR 10.114)

15 : - Damp proof course 25 mm thick of cement concrete 1:2:4 using stone aggregate (HSR 10.115) -Note

16 : - Providing and laying 80 mm thick ISI Marked interlocking paver blocks conforming to is 15658 : 2006/ IRC SP 63-2004 of all shapes and colours in design mix cement M-40 over a bed of 30 mm thick fine sand complete in all respect. (HSR 10.159) Note : Reputed make Paver Block Only ISI marked will be used as approved by Engineer-in-charge.

17 : - First class brick work laid in cement sand mortar 1:6 in foundation and plinth (HSR 11.2)

18 : - First class brick work laid in cement sand mortar 1:4 in foundation and plinth (HSR 11.4)

19 : - First class brick work laid in cement sand mortar 1:6 in first storey upto 4 meters above plinth level (HSR 11.7) First storey

: - Second storey

: - Third storey/mumty & machine room

20 : - First class brick work laid in cement sand mortar 1:4 in first storey upto 4 metres above plinth level (HSR 11.9)

21 : - 11.43 cm thick brick wall laid in cement sand mortar 1:4 in superstructure (HSR 11.48)(a) First storey

: - Second storey

22 : - Masonary work using flyash-lime based bricks (IS :23894-2002) laid in cement sand mortar 1:6 in super structure. (HSR 11.102.) Note:- The Agency to whom the work is alloted will have to produce original bill/voucher for all quantity in token of proof of purchase of material First storey

: - Second storey

: - Third storey/mumty & machine room

23 : - Terracing consisting of tiles 22.86 cm x 11.43 cm x 3.81 cm laid over 87.50 mm mud filling on a layer of 25 mm mud plaster and another layer of mud mortar for laying the tiles, including two coats of bitumen laid hot at 1.65 kg per sqm on top of RCC slab including grouting with cement sand mortar 1:3 and top surface to be left clean etc. (HSR 13.13) First storey

: - Second Storey

: - Third storey/mumty & machine room

24 : - Top khurra 0.6 m x 0.6 m for rain water pipe in 25 mm thick cement concrete 1:2:4 ovr 50 mm thick cement concrete 1:8:16 (HSR 13.50) First storey

: - Second Storey

: - Third storey/mumty & machine room

25 : - Supplying & fixing in position G.I pipe class 'B' spouts in chajjas and cantilevers. (HSR 13.55 (e) 50mm i/d G.I. pipe Second storey

26 : - Bottom khurra on ground 1.2 m x 0.6 m consisting on brick-on-edge laid in cement mortar 1:3 over 75 mm cement concrete 1:8:16 including 12 mm thick cement plaster 1:3 (HSR 13.57) First storey

27 : - Cement concrete 1:2:4 gola 10 cm x 10 cm quadrant along junction of roof with parapet wall finished smooth, where specially specified (HSR 13.64) First storey

: - Second Storey

: - Third storey/mumty & machine room

28 : - Providing & fixing PVC rainwater pipe 6 kg. pressure of ISI mark in cement mortar during masonary work (b) 150 mm dia PVC pipe 6 kg pressure (Note:- Reputed make PVC pipe such as Supreme, Finolex, Prince will be used as approved by Engineer-in-charge (HSR. 13.89) (b). Note:- The Agency to whom the work is alloted will have to produce original bill/voucher for all quantity in token of proof of purchase of material First storey

: - Second Storey

: - Third storey/mumty & machine room

29 : - Providing and fixing PVC bend ISI mark (b) 150 mm dia PVC bend (Note:- Reputed make PVC bend such as Supreme, Finolex, prince will be used as approved by Engineer-in-charge. (HSR 13.90)(b) Note The Agency to whom the work ia alloted will have to produce original bill/voucher for all quantity in token of proof of purchase of material. First storey

30 : - Base course of floors consisting of 100 mm thick cement concrete 1:8:16 and 100 mm sand or stone filling (HSR 14.1)

31 : - Screed of 50 mm thick cement concrete 1:8:16 to be laid below the topping (HSR 14.4) First floor

: - Second floor/mumty & machine room

32 : - Conglomerate floor 50 mm thick cement concrete topping 1:2:4 (HSR 14.10)

33 : - Precast chequered terrazzo tiles 22 mm thick in cement with marble chips of size and colour as required, laid on 20 mm thick bed of cement coarse sand mortar 1:3 with neat cement slurry mixed with pigment to match the shade of tiles between joints and over the base in floors, treads of steps and landings, including rubbling and polishing (HSR 14.46)

34 : - Kotah stone flooring minimum 25 mm thick in any pattern as specified over 12 mm thick base of cement coarse sand mortar 1:3 ladi and jointed with neat cement slurry mixed with pigment to match the shade of stone including rubbing and polishing (HSR 14.62) note: The Agency to whom the work is alloted will have to produce original bill/voucher for all quantity in token of proof of purchase of material Ground floor

: - First floor

: - Second floor/mumty & machine room

35 : - Extra for noising in treads of steps of kotah stone slab (HSR 14.65) Ground floor

: - First floor

36 : - Kotah stone 20 mm thick in skirting risers of steps, dados and wall facing (lining ) and pillars laid on 12 mm thick cement coarse sand plaster 1:3 ladi and jointed with neat cement slurry mixed with pigment to match the shade of stone including rubbing and polishing including labour for fixing cramps, dowels and pin etc. (HSR 14.66) Note:- The Agency to whom the work is alloted will have to produce original bill/voucher for all quantity in token of proof of purchase of material. Ground floor

: - First floor

: - Second floor/mumty & machine room

37 : - Laying and fixing rectified ceramic anti skid tiles of size 400x400mm of approved make in floors laid in any pattern as specified over base of 20mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade of tiles. Brands like RAK, NITCO, KAJARIA, SIMPOLO & ORIENT BELL (as approved by the Engineer in charge) (HSR 14.91) Note:- The Agency to whom the work is alloted will have to produce original bill/voucher for all quantity in token of proof of purchase of material Ground floor

38 : - Providing & Fixing Ist Quality ceramic glazed wall tiles conforming to IS. 15622 ( thickness to be specified by the manufacturer) of approved make in all colours, shades except burgundy bottle green, black of any size as approved by Engineer-in-charge in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 coarse and jointed with grey cement slurry including ointing in white cement mixed with pigment of matching shades complete. (b) size of ceramic glazed tiles 300 x 450 mm of reputed manufacturer like:- RAK, N"ITCO, Kajaria, SIMPOLO & ORIENT BELL shall be used as approved by Engineer-in-charge (HSR 14.92) (b) Note:- The Agency to whom the work is alloted will have to produce original bill/voucher for all quantity in token of proof of purchase of material Ground floor

39 : - Providing and laying Baroda green marble stone 17 mm and above thick flooring included matching the grains of marble slab in any pattern as specified laid over 12 mm thick cement sand mortar 1:3 and jointed with white slurry mixed with pigment to match the shade of marble including rubbing and polishing. The rates are for all heights/storey. The sample shall be got approved from Engineer in charge. (HSR 14.99) Ground floor

: - First floor

: - Second floor

40 : - Plastering on walls 10 mm thick cement plaster 1:3 (HSR 15.2) First storey

: - Second storey

: - Third storey/mumty & machine room

41 : - Plastering on walls 12 mm thick cement plaster 1:4 (HSR 15.5) External Plaster First storey

: - Second storey

: - Third storey/mumty & machine room

42 : - Plastering on wall 12 mm thick cement plaster 1:6 (HSR 15.7) First storey

: - Second storey

: - Third storey

43 : - Plastering on wall 15 mm thick cement plaster 1:6 on the rough side of single or half brick wall 1:6 (HSR 15.12) Internal Plaster First storey

: - Second storey

: - Third storey/mumty & machine room

44 : - 10 mm thick cement plaster 1:4 under side of ceiling (HSR 15.52) Ground floor

: - First floor

: - Second floor/mumty & machine room

45 : - Preparation of ply wood surface for painting including sand paparing the surface and applying filling with approved quality filler consisting of with lead, linseed oil, varnish and chalk miti including finishing the surface to required finish complete. Painting on wooden surfaces etc. (HSR 16.1)

46 : - Applyng pink primer or aluminium priming coat on wood work including preparation of surface knotting and stopping etc. (Note:- First quality paint/primer of reputed make firm such as Goodlass-Nerolac, Berger, Garware, Jenson, Nicholson, Asian & Shalimar Shall be used as approved by Engineer-in-charge in writing, drum of paint shall be opened in presence of Engineer-in-charge) (HSR 16.2)

47 : - Painting two coats excluding priming coat with synthetic enamel paint in all shades on new wood work or metallic or plastered or concrete surfaces to give an even shade. (Note:- First quality paint of reputed make firm such as goodlass- Neolac, Berger, Garware, Jenson, Nicholson, Asian & shalimar shall be used as approved by Engineer-in-charge in writing, drum of paint shall be opened in presence of Engineer-in-charge. (HSR 16.3)

48 : - Applying priming coat with metal primer on new steel or iron work including preparation of surface, painting on mettalic surfaces etc. (Note:- First quality paint/primer of reputed make firm such as goodlass-Nerolac, Berger, Garware, Jenson, Nicholson, Asian & shalimar shall be used as approved by Engineer-in-charge in writing, drum of paint shall be opened in presence of Engineer-in-charge) (HSR 16.9)

49 : - Painting two coats excuding priming coat with ready mixed paint for metelic surfaces in all shades on new steel or iron work (Note:- First quality paint of reuted make firm such as Goodlass-Nerolac, Berger, Garware, Jenson, Nicholson, Asian & Shalimar Shall be used as approved by Engineer-in-charge in writing, drum of paint shall be opened in presence of Engineer-in-charge) (HSR 16.17)

50 : - Providing and Applying priming coat with cement primer in all shades on newly plastered or concrete exterior surfaces. (Note:- First quality paint of reputed make firm such as Goodlass-nerolac, Berger, Garware, Jenson, Nicholson, Asian & Shalimar Shall be used as approved by Engineer-in-charge in writing, Drum of paint shall be opened in presence of Engineer-in-charge) (HSR 16.25). Through Rate

51 : - Providing and Applying Painting two coats with ready-mixed exterior paint in all shades on newly plastered or concrete surface of walls. (Note:- First quality paint of reputed make firm such as Goodlass-nerolac, Berger, Garware, Jenson, Nicholson, Asian & Shalimar Shall be used as approved by Engineer-in-charge in writing, Drum of paint shall be opened in presence of Engineer-in-charge) (HSR 16.26). Through Rate

52 : - Distempering with washable oil bound distemper (of approved manufacture) two coats over one priming coat on new work. (Note:- First quality paint of reputed make firm such as goodlass-Nerolac, Berger, Garware, Jenson, Nicholson, Asian & Shalimar shall be used as approved by Engineer-in-charge in writing, drum of paint shall be opened in presence of Engineer-in-charge. (HSR 16.58)

53 : - Finishing walls with exterior decorative cement based paints such as snowcem Robbiacem etc on new work, two coats to give an even shade (HSR 16.61)

54 : - Providing two coats of exterior acrylic emulsion paint. (Note:- First quality paint of reputed make firm such as goodlass-Nerolac, Berger, Garware, Jenson, Nicholson, Asian & Shalimar shall be used as approved by Engineer-in-charge in writing, drum of paint shall be opened in oresence of Engineer-in-charge.) (HSR 16.79) (b)

55 : - Providing and applying two coats white cement based putty over plastered surface and grindling the surface smooth with sand paper to get an even and smooth finish including cost and carriage of all material, labour charges, scaffolding, sundries etc. complete. (Note:- Reputed make putty such as JK/Birla shall be used as approved by Engineer-in-charge). (HSR 16.81)

56 : - Providing and fixing commercial type block board, plain lining, butt jointed, including wooden plugs (teak) placed at 45 cm to 60 cm centers, complete with necessary nails (frame work shall be payable extra) (b) 19 mm thick (HSR 17.49 (b)) First storey

57 : - Providing & fixing six-levers brass 10 cm mortice latch and lock, and a pair of lever handles with necessary screws, etc. complete (Indian make of reputed firm, such as godraj or equivalent) (HSR 17.73)

58 : - Supplying and fixing hydraulic door closer, ISI mark, with necessary screws, etc. complete (HSR 17.82) (C.) ISI designation no. III size of door 851 mm to 1000 mm)

59 : - Providing & fixing 0.50 mm thick aluminium sheet including cost of necessary screws etc. complete (HSR 17.87)

60 : - Factory manufactured panelled door or glazed window, shutters of commercial hard wood, such as hollock, champ, chikrassy & chaplash etc. (Non-coniferous timber other than teak, conforming to IS specification no. 1003, Kiln-seasoned) with 100 mm wide vertical styles, 150 mm wide lock rail, 200 mm wide bottom rail and 100 mm ide other rails and 100 mm wide other rails with panels of 15 mm thick tongued and grooved of commercial hrd wood and including costof iron hinges, screws, chocks, cleats, stops, nails etc. complete fixed in position (Excluding the cost of any fittings, other than specified above, but including labour for fixing the same in position) -(b)- 35 mm thick (HSR 17.90) (b)-Note I under 17.18.

61 : - Factory manufactured wire gauze door and window shutters of commercial hard wood, such as hollock, champ, chikrassy & chaplash etc. (Non-coniferous timber other than teak, conforming to IS specification no. 1003, Kiln-seasoned) with 100 mm wide vertical styles, 150 mm wide lock rail, 200 mm wide bottom rail and wire gauze of 140 G or 120 G designation including cost of iron hinges, screws, chocks, cleats, stops, nails etc. complete fixed in position (Excluding the cost of any fittings, other than specified above, but including labour for fixing the same in position) -(i)- 30 mm thick (HSR 17.92) (1)-Note I under 17.18.

62 : - Factory manufactured solid flush door shutters, with block board core as per I.S. No. 1659-1669 bonded with water proof type phenol formaldehyde synthetic resin, hot-pressed, conforming to I.S. 2202 part-I and II, fixed in position, including iron hinges, screws chocks/cleats and stops etc. (excluding the cost of any fittings other than specified above, but including labour for fixing the same in position):- (Note) :- Commercial veneering with vertical grains or cross bands and face veneer on both sides commercial facing with laminated core and lipped edges. (Duro, Green) 25 mm. thick (HSR 17.93 (a) (i)- note I under 17.18))

63 : - Factory manufactured solid flush door shutters with block board core as per I.S no. 1659-1669 bonded with water proof type phenol formaldehyde synthetic resin, hot-pressed, conforming to I.S 2202 part-I anf II fixed in position, including iron hinges, screws, chocks/cleats, and stops etc. (Excluding the cost of any fittings, other than specified above, but including labour for fixing the same in position) -(Note) : - Commercial veneering with vertical grains or cross bands and face veneer on both sides commercial facing with laminatyed core and lipped edges. (Duro, green) 35 mm thick (HSR 17.93) (a) (iii))-Note I under 17.18.

64 : - Wrought iron and mild steel (using angles, flats, square bars, tees and channels), ladders, grills gratting frames, window guards, iron doors openable or fixed staircase or parapet or any other type of railing, gates and tress guards etc., including cost of screws and welding rods or bolts and nuts complete fixed in position (HSR 18.12)

65 : - Steel reinforcement TMT bars FE-500 EQR/FE-500 D grade or more for RCC work, where no included in the complete rate of RCC including straightening, bending, binding, wastage, overlaps, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire etc. and placing in position complete in all respects for all heights /depths/storeys/basements etc. NOTE:- Reinforcement shall be measured in length including hocks, if any, separately for different diameters as actually used in work, excluding overlaps, Wastage, overlaps, couplings, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire or other methods for binding and placing shall not be measured and cost of these items shall be deemed to be included in the rates for reinforcement. (HSR 18.22)

66 : - Supplying and fixing glass panes including special metal sash putty of approved make (b) glass panes 4 mm thick exceeding 40 sq.m areas. Modi, Saintgobain (HSR 18.30 B)

67 : - Pressed steel sheet frames (Chowkhats) consisting of 2 mm thick steel sheet of the specified section including ironlugs (hold fasts) iron hinges, conforming to PWD specifications, including bolts for fixing stops, locknotch, provision for receiving tower bolts and finished with one coat of ready mixed paint red lead non-setting primer of approved quality fixed in position including the cost of cement concrete 1:3:6 for filling in the frame and cement concrete 1:3:6 for lugs complete. (a) Door and window frame of size 89 mm x 50 mm with 40 mm wide single rebate (Item no. 18.34)(a) First, second & Third storey/Mumty & machine room

68 : - b) Door and window frame of size 76 mm x 38 mm with 35 mm wide single rebate (Item no. 18.34 b) First & second storey

69 : - Door and window frame of size 127 mm x 50 mm with 40 mm wide double rebate (HSR 18.34) (c)

70 : - Preparation of Sub Grade including trenching, rough dressing of soil, final dressing of earth to given levels and camber, watering rolling with road roller, and compacting the bed.(HSR 24.1)

71 : - N.S Items Earth filling under floors with tibba sand non plastic under floors with good earth taken from outside of campus area with all lead and lift including loading, unloading, laid in 15 cm layer including ramming, watering, consolidating, compaction, and compensation of earth etc. complete in all respect as per the direction of engineer in charge (For any lead lift) (N.S Items)

72 : - Providing and fixing vitrified tiles of size 600 x 600 mm of approved make in flooring laid in any pattern as specified over base of 20 mm thick cement coarse sand mortar 1:3 and joint will be 4 mm wide instead of zero joint by using spacers to ensure iniformity of joint duly filled with epoxy grout minimum depth upto the thickness make such as pidilite (T-13 Rpff), Ferrous crete or equivalent) as approved by Engineer in-Charge. (Note): Tile shall be of premium quality (first quality) of reputed manufacturer like RAK, NITCO, KAJARIA, SOMANI, JOHNSONS, ,ORIENT BELL & SIMPOLO. (Double charged tiles shall be used as approved by Engineer in charge. (N.S). Note :- The Agency to whom the work is alloted will have to produce original bill/voucher for all quantity in token of proof of purchase of material. Ground floor

73 : - Providing and fixing vitrified tils of size 600 x 600 mm of approved make in skirting / dados, pillars, wall facing, laid in any pattern as specified over base of 20 mm thick cement coarse sand mortar 1:3 and joint will be 3 mm wide instead of zero joint by using spacers to ensure uniformity of joint duly filled with epoxy grout minimum depth of 3 mm of reputed (make such as pidilite (T-13 Roff), Ferrous crete or equivalent) as approved by Engineer-in-charge. (Note): Tile shall be of premium quality (first quality) of reputed manufacturer like RAK, NITCO, KAJARIA, SOMANI, JOHNSONS, ,ORIENT BELL & SIMPOLO. (Double charged tiles shall be used as approved by Engineer in charge. (N.S). Note :- The Agency to whom the work is alloted will have to produce original bill/voucher for all quantity in token of proof of purchase of material. Ground floor

74 : - Providing and laying pre polished granite stone 17 mm & above (Colors like:- S-White, Steel Grey, Tan Brown, Marigold, Crystal blue, Rajasthan Black, Copper Silk) in skirting/Dados, resers of steps, pillars, wall facing, laid in any pattern as specified over base of 12 mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade of grenite including labour for fixing cramps pins and dowels etc. (N.S) Ground floor

: - First floor

75 : - Providing and laying pre polished granite stone 17 mm & above (Colors like:- S-White, Steel Grey, Tan Brown, Marigold, Crystal blue, Rajasthan Black, Copper Silk) in flooring, laid in any pattern as specified over base of 20 mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade of grenite including labour for fixing cramps pins and dowels etc. (N.S) Ground floor

: - First floor

76 : - Providing Tower bolts with nuts & screws, etc. complete (N.S) Aluminium (Size 250 mm x 10 mm) ISI Marked

77 : - Providing Sliding bolts with nuts & screws, etc. complete (N.S) Aluminium (Size 300 mm x 16 mm) ISI Marked

78 : - Providing Sliding bolts with nuts & screws, etc. complete (N.S) Aluminium (Size 250 mm x 16 mm) ISI Marked

79 : - Providing Door handles with nuts & screws, etc. complete (N.S) Aluminium (Size 150 mm x 200 mm x 35 mm) ISI Marked

80 : - Providing Butt Hinges with nuts & screws, etc. complete (N.S) Aluminium (Size 100 mm x 31.75 mm x 11 mm) ISI Marked

81 : - Providing and laying 200mm thick granular sub base consisting of drainage layer confirming to Table 400.1 Grading –VI of MORT&H 5th edition, mixing in a mechanical mix plant at OMC, carriage of mix material to the site of work, spreading in uniform layer with motor grader on prepared surface and compacting with vibratory power roller to achieve desired density complete as per clause No.401 of MORT&H specifications for road & bridge (5th Revision) of 2013

82 : - Water Bound Macadam G-II (53 mm to 22.4 mm gauge): Providing, laying spreading and compacting 75 mm thick (av). Stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thicknes, hand packing, rolling with 3 wheeled steel vibratory roller 8-10 tones in stages to proper grade and camber, applying and brooming requisite type of screening/binding materials to fill up the interstices of coarse aggregate, watering and compacting to the required density as per Clause of MORT &H Specificaiton No. 404. of MORT&H specifications for road & bridge (5th Revision) of 2013 as per drawing and design directed by the Engineer complete in all respects (NS)

83 : - Construction of Dry Lean cement concrete (M-10) Sub-Base over a prepared Sub grade with coarse and fine aggregate conforming to IS:3873, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600-1, cement content not to be less than 150 kg/cum optimum moisture content to be determined during trial length construction, concrete strength not be less than as per ISI marked provision MPA at 7 days, mixed in the batching plant, transported to site laid with a paver, compacting with 5-10 tonnes vibratory roller, finishing and curing. Unit=cum, taking output=450 cum (990 tonne), taking batch mix plant of 15.20 cum as per MORT&H specification clause - 601 latest edition (N.S.)

84 : - PUBLIC HEALTH WORKS Excavation for pipe lines running under pressure in trenches and pits, in open areas, where disposal of surplus earth is done along with the alignment including trimming & dressing sides, levelling of beds of trenches to correct grade, cutting joint holes, cutting trees and bushes, etc. refilling consolidation and watering of refill, in 15 cm layers and restoration of unmetalled or unpaved surface to its original condition, including the cost of dewatering of rain water, diversion of traffic, night signals, fixing caution boards, watching, fencing etc. and outside the town in ordinary soil:- 6.8 (a) Without timbering and shoring upto 1.50 mts

85 : - Excavation of trenches in streets, lanes or in open areas for storm sewer, sewers running by gravity and manholes to full depths as shown in drawings including shoring, timbering of poling boards, frame system type, dressing to correct sections and dimensions accordingly to templates and levels, dewatering, provision for diversion of traffic, cutting trees and bushed etc. night signals, profiles, pegs, sight rails, boning ends, crossing over trenches for access to the houses, watching fencing etc. fixing and maintence of caution board refilling of trenches, watering of refill, in 15 cm layers ramming and restoration of unmetalled or unpaved surface to original condition and removal of surplus soil, from site of work, upto a lead of 1 Km in ordinary soil: (a) For depths of excavation not exceeding 3 meters below ground level. 6.10 (a)

86 : - Boring for hand-pump in clay, fitting strainer and pipe (b) above 75 mm dia bore, but not exceeding 100 mm dia (i) from 0 to 15 meter HSR 26.10 (b) (i)

87 : - Drilling and tapping cast iron pipe line of all diameters and screwing in ferrule and connections. 28.22 40mm I/d

88 : - Cutting holes upto 23 cm through brick work in mud walls for pipes and making good including repointing, replastering and finishing according to existing finish where required. 28.23 a) 11.43 cm thickness of walls

: - b) 22.86 cm thickness of walls

89 : - Bailing out water from the trenches for making new connections in fully charged pipe lines including cleaning, trimming and dressing the trenches to correct alignment and grade as required by the Engineer-in-charge. 28.47 (a) Upto 200mm I/d

90 : - Providing and placing in horizontal layers filtering media screened, washed and cleaned as described below: 28.50 (a) (a) Top layer: - Fine sand screened, cleaned and washed and graded (effective size 0.2 to 0.4 mm with uniformity coefficient 2.0 to 3.0) from Ghaggar or other approved source

: - (b) Second layer :- coursed sand screened, cleaned and washed and graded from 3 mm to 6 mm (from Ghaggar or approved equivalent quarry)

: - (c) Third layer: - Bajri screened washed and graded from 6 mm to 20 mm (from Ghaggar or approved equivalent quarry)

: - (d) Fourth layer: - Bajri (coarsed) screened and washed graded from 20 mm to 25 mm (from Ghaggar or approved equivalent quarry)

: - (e) Bottom layer:- Broken stone, screened, washed and graded from 50 mm to 75 mm (from Ghaggar or approved equivalent quarry)

91 : - Constructing brick masonry inspection chamber sizes as given below upto 0.60 meters average depth in cement mortar 1:5 lime concrete with 40 percent lime mortar 2:3 in foundation cement concrete 1:2:4 benching 12mm thick cement plaster 1:2 with a floating coat of 1 mm thick of neat cement RCC 1:2:4 slab 100mm thick/C.C. topping 50mm thick with 455 mm x 455 mm / 455 mm x 610mm inside light duty C.I inspection chamber cover and frame weight as per I.S.I specification painted with 3 coats of black bitumastic superior paint complete as per standard design. 29.84 b) Size 450mm x600mm inside (with 455mmx610 mm cover and frame single seal pattern 1 weighing 38 kg with C.C topping

92 : - Providing, lowering, laying, cutting (cut surface to be uniformity finished) jointing with rubber rings marked with IS:5382 and testing of SPIGOT AND SOCKETTED RCC NP2 MARKED WITH IS:458-1988 and specials into trenches for all depths including carriage, loading, unloading, stacking, handling, re-handling etc. complete in all respects to the satisfaction to the Engineer -in-charge 29.93 a) 200 mm i/dia RCC NP2

93 : - Providing and fixing SFRC manhole covers and frames markd with IS: 12592 including setting the same to correct lines and levels in 1:2 cement sand mortar over manhole including carriage loading, unloading stacking, handling, re-handling etc. complete in all respect to the satisfaction of engineer-in-charge. Type: Extra heavy duty set (MD-10) 560 mm clear opening. 29.94

94 : - Providing and laying SW pipe grade –A in standard length of 600 mm each pipe marked with IS :651 and their lowering, cutting , jointing & testing as described in HSR item No. 29.38 to 29.40 including the cost of jointing material as well as carriage, loading, unloading , stacking., handling, rehandling etc. complete in all respect to the satisfaction to the Engineer-in-Charge 29.95 ii) 150 mm i/d

: - i) 100 mm i/d

95 : - PROVIDING AND FIXING IN POSITOIN BEST INDIAN MAKE (to the approval of the Engineer-in-charge). INDIAN TYPE ORISSA OR ORYA WATER CLOSET SUITE for Sinking into floor, with raised foot treads COMPLETE WITH 100 MM H.C.I, ‘P’ TRAP with or without vent as required and all OTHER NECESSARY FITTINGS as fully described in item no.30.1 above (i) white 580mm

96 : - Providing and fixing in position best Indian make European type water closet suite with concealed 'P or 'S trap with or without vent (as approved by the Engineer-in-charge) and all other necessary fitting as fully described in item no. 30.3 above. 30.6 (ii) single colour

97 : - Providing and fixing 15 liters capacity low level vitreous china ware cistern complete with flush bend all other necessary fitting instead of C.I high level cistern complete with fitting. 30.12 (i) white

98 : - Providing and fixing best indian make plastic hygenic seat with lid complete instead of hollow black or white plastic seat and lid (HSR 30.13) 30.13(i) white plastic seat (solid)

99 : - EXTRA FOR providing and fixing 32 MM dia G.I./C.P FLUSH PIPE complete with accessories instead of 32/MM dia galvanized telescopic flush pipe with clips (as required by the Engineer-in-charge) b)-32 mm dia. C.P brass flush pipe. 30.15

100 : - Providing and fixing in position best indian make flat black or angular lipped front urinal 465 mm high consisting of:- Flat black lipped or angular urinal basin of VITREOUS CHINA WARE (to the approval Of the Engineer-in-charge) i(White)30.19

101 : - Providing & fixing in position best Indian make white lavatory suites (with full anti splash rim in vitreous chinaware and all other necessary fittings as fully described in item no. 30.41 above 30.42 (i) size 610 mm x 510 mm with one no. tap

102 : - Providing and fixing in position 32mm dia G.I waste pipe embedded in wall or lead waste pipe (weighing 3.47 kg. per metre and 2.8 mm thick) upto floor level including cost of wipped solder joint etc. complete (as required by the Engineer-in-charge) 30.48

103 : - Providing and fixing in position best indian make towel rails fixed in with rawlslugs embedded in walls with C.P Brass screws, complete in all respect including cutting and making goods the walls etc. 30.68 a) 25mm dia C.P brass adjustable. ii) 600mm long.

104 : - Providing and fixing in position glass shelf fixed in with rawl plugs with C.P brass screws complete including cutting and making good the walls etc. 30.69 a) With C.P brass brackets and guard rail (i) 600 mm x 125 mm

105 : - Providing and fixing in position best Indian make bevelled edge 5.5 mm thick mirror mounted on asbestos sheet ground fixed in position by means of 4 nos. chromium plated brass screws and washers over rubber washers and rawl plug embeded in the wall or chromium plated brass clamps with C.P. brass screws (as required by the Engineer -in -charge) complete including cutting and making good the walls etc. 30.71 a) Indian make (I) 600mmx450mm

106 : - Providing and fixing in position 15 mm I/d C.P. brass bib cocks of best quality (as required by the engineer I charge) 30.75(a) Bib cock long body

: - (c) Bib cock

107 : - Providing and fixing in position C.P brass stop cocks (as approved by the Engineer-in-Charge) 30.76 a) 15mm stop cock i) Stop cock male and female end.

: - ii) Concealed stop cock with flange

108 : - Providing and fixing in position best indian make flexible tube connection 30.82 b) C.P brass i) 15mmx300mm.

109 : - Providing and fixing in position H.C.I soil waste vent or antisyphonage pipes to I.S.I specification of E.L.C manufacture or of any other reputed firm including cutting and wastage etc. and cutting holes in walls, roofs or floor etc. and making good to its original condition but excluding cost of lead jointing 30.84 100mm internal diameter

: - 75mm internal diameter

110 : - Providing lead caulked joints to H.C.I pipes and specials conforming to I.S.I specification of E.L.C manufacture or any other reputed firm including cost of lead yarn, fuel and tools etc. 30.87 100mm internal diameter (1.13kg)

: - 75mm internal diameter (0.91kg)

111 : - Providing and fixing in position M.S or heavy flat iron clamps made out of M.S flat not less than 5 mm of the approved deign for fixing C.I soil waste vent or anti pipes to walls complete in all respects including cutting and making good the walls and floors etc. and painting. 30.88 For 100 mm internal diameter pipes

: - For 75 mm internal diameter pipes

112 : - Providing and fixing HCI floor traps ISI marked of the self cleaning design with C.P brass hinged grating with frame with or without vent arm and including cement concrete 1:2:4 under and around the floor trap where required upto floor level complete in all respects including cutting and making good the walls and floors etc. minimum depth of water should be 150 mm with a minimum seal of 50mm b) With 75mm I/d outlet. 30.89

113 : - Providing and fixing in position HCI 50 mm internal diameter outlet plain nahani trap ISI marked of the self cleaning design with CP brass hinged granting with frame weighting 6.80 kg each fixed complete as fully described in item no. 30.89 (a) with 75 mm i/d outlet plain Nahani trap 30.90

114 : - Providing and fixing in position H.C.I. special for soil, waste, vent or anti-syphonage pipes to I.S.I marked including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead jointing 30.91 (a) 100mm i/d pipes (i) Heal rest bend

: - (xiii) Bend with door

: - (xxii) Collars

: - (xxiv) c) WC connection 300mm long

: - (b) 75mm (xiii) Bend with door

: - (xiv) Bend Plain

: - xviii) collars

115 : - Providing and fixing in position gully traps fixed in cement concrete 1:4:8 complete with H.C.I. grating 150mm x 150mm cast iron cover weighing approximately 7.26kg and frame clear opening 300mmx300mm and outside size 330mmx330mm and chamber including cost of all brick work in cement mortar 1:5 cement concrete 1:8:16 in foundation, and cement concrete 1:2:4 in coping around C.I cover and frame etc. with three coats of black bitumastic superior paint of approved manufacture on all C.I work as per standard design, minimim depth of water should be 150mm with a minimum seal 50mm 30.114 a) 100mm internal diameter S.W gully trap.

116 : - Providing and fixing HDPE water storage tanks of sintex, Diplast, O.K. supreme make with covers/lids marked with IS:12701 on roof top of buildings including cost of hoisting and placing Iin position, making connections with inlet and outlet pipes, providing overflow and scour provisions with suitable plug on scour pipe including cost of nipples, washers, flanges for connections in tanks complete in all respects to the satisfaction to the Engineer. 30.119 1000 Ltr. Cap.

: - 1500 Ltr. Cap.

117 : - DSR ITEMS Providing and fixing GI pipes complete with GI fittings and clamps, i/c cutting and making good the walls etc. (DSR 18.10) (DSR 18.10) 15mm I/d

118 : - Providing and fixing GI Union in GI pipe including cutting and threading the pipe and making long screws etc. complete (new work) (DSR 18.46). 15mm I/d

119 : - Providing and fxing gun metal gate valve with C.I. wheel of approved quality (Screwed end) (DSR 18.17) 20mm I/d

120 : - Providing & fixing G.I Pipes complete with G.I fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting and making good the wall: (DSR 18.11) (i) 15 mm internal diametre of pipeline

: - (ii) 20 mm internal diametre of pipeline

121 : - N.S ITEM Providing and fixing Steel bar embedded plastic steps of size 263 mm x 165 mm of orange colour, conforming to specifications, in pump chambers, manholes etc. having minimum 3 mm thick Polypropylene polymer confirming to IS : 10910 encapsulated on 12 mm dia ribbed steel bars per IS : 1786

122 : - Providing & fixing PVC pipe (4kg/cm2) duly slotted IS-4985:1988 including cost of adhesive, carriage, loading, unloading etc. complete in all respects to the satisfaction engineer incharge. size : 160 mm od

: - Note:- 1. In case of any difference in the unit & nomenclature of any of the HSR Items of Civil, P.H., & E.I. work depicted in this DNIT and that given in HSR, the unit and nomenclature given in HSR shall be applicable. 2. Only reputed make material will be used (make/brand exhibited in HSR and exhibited in approved standard document) as approved by Engineer-in-charge, while executing various items/works at site.

The Kandroli Coop LC Society Ltd