Loading
Loading…
Loading…
Tender Value
Refer Docs
EMD Value
₹1.7 L
Closing Date
7 Sept 2026, 5:00 pm
Executive Engineer
Executive Engineer, Construction Division E and M U.P. Jal Nigam, Urban, Varanasi
Repairing of Screw Pumps, Classifier and grit machine No. 1, belt conveyor, supply of Spare Bearings and Pinion, etc. at Konia MPS, Varanasi
2026_UPJNM_1178891_1
1793/E-Tender/48 Dated 20.08.2026
Open Tender
Repair and Maintenance Works
Percentage
120 days
Varanasi
As per NIT and Tender Document
2 documents required · 2 mandatory
₹5,900
E.E. CD E and M U.P. Jal Nigam, Urban, Varanasi
₹1.7 L
24 Aug 2026
24 Aug 2026
8 Sept 2026
24 Aug 2026
7 Sept 2026
24 Aug 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Repairing of Screw Pumps, Classifier and grit machine No. 1, belt conveyor, supply of Spare Bearings and Pinion, etc. at Konia MPS, Varanasi | |||||
| 1.01 | Repairing of damaged round surface, side walls and M.S. Profile and apoxy painting of Screw pump No. 1,2 ,3 & 4 at Konia MPS, Varanasi. | - | - | - | - |
| 1.02 | Making bandha at inlet of screw pump with the help of Thick polythene and sand bags to prevent inflow of water and dewatering of screw pump sump well including desilting of silt and garbages . | - | Job | - | - |
| 1.03 | Repairing of damaged bottom round surface and side walls of screw pump corresponding to screw with clearance of 10mm with cement sand and gap grit mortar and quick setting compound . Finishing with cement , sand and painting with cement slurry maintaining the gap with 10mm gauge . | - | Job | 0.29 | - |
| 1.04 | Repairing of side M.S. profile sheet by cutting, welding including supply and fitting of required materials like M.S. sheet , M.S. Flat , nut bolts , fasteners etc. after this proper cleaning of old Painting & rusted of all surface of screw pump cylindets,blades,MS Profiles etc chipping, scraping, rubbing with wire brush and sand paper , Two coat epoxy painting of above cleaned surface Green paint including cost of material and labour complete with all material , Labour and T & P complete . Removal of sand bag and thick polythene from screw sump well to silt dump yard. | - | Job | 0.29 | - |
| 1.05 | Dismantling and shifting of soft starter panel (3Nos.), ATS panel ( 1No.) from 1st stage pump house, LT panel of Pump No. 7 & 8 (2nd stage), LT panel of PTU(old) & APRU panel from LT control room to Konia store. | - | Job | 0.29 | - |
| 1.06 | shifting, carting, transportation, proper staking of scrap materials from Konia MPS to Dinapur store through narrow street by chain pulley man power, hand trolley, hydra & truck.(25-30 turn) including, loading, unloading & labour charges etc.complete. | - | Job | 0.87 | - |
| 1.07 | Fabrication and installation of MS foundation structure for new soft starter with the help of grouting on floor and their enamel coated painting. | - | Job | - | - |
| 1.08 | Repairing of screw pump sump girder support beam, deflectors jali of grit machine No. 1 & 2, including cost of material T & P , labour charge complete. | - | Job | 0.29 | - |
| 1.09 | Fabrication, supply and fitting of MS. Jali as per old sample of PTU area MS. Jali made by 50mm x50mm x5mm iron angle 37 x5mm m.s. Strip dully painted by primer and supper enamel paint including cost of material T & P , labour charge complete. | - | Job | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 6.17 MB
DOC1793KONIA.pdf
Tender Documents • 2.70 MB
BOQ_2216038.xls
BOQ • 0.29 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].