Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | l1₹10.5 CrAccepted-AOC HOUSE NO 190 WARD NO 08 HAMIRPUR | ₹10.5 Cr | l1 | Accepted-AOC L1 |
| 2 | l2₹11.0 CrRejected-Finance VILL AND P O JAHU NEAR SHIV MANDIR TEHSIL BHORANJ DISTT HAMIRPUR HP | JAHU | HAMIRPUR | HIMACHAL PRADESH | ₹11.0 Cr | l2 | Rejected-Finance l2 |
| 3 | Rejected-Technical | - | - | Rejected-Technical Rejeceted |
Tender Value
₹10.2 Cr
EMD Value
₹20.3 L
Closing Date
2 Mar 2023, 10:30 amClosed
EE Hamirpur
Executive Engineer HPPWD Hamirpur
SH Formation cutting 6/7.50 metre wide Retaining wall Cross drainage GSB WMM BM SDBC, interlocking Paver V-Shape-Drain Kilometer stone, Parapet Crash Barrier Km. 0/0 to 12/0 under NABARD RIDF-XXVIII
2023_PWD_69639_1
Improvement KudhiarMasiana road Km. 0/0 to 12/0
Open Tender
Civil Works - Roads
448 days
Hamirpur
Please refer Tender documents.
15 documents required · 15 mandatory
₹5,000
₹20.3 L
13 Apr 2023
24 Feb 2023
2 Mar 2023
24 Feb 2023
2 Mar 2023
24 Feb 2023
Amount
Earth work in excavation by mechanical means (Hydraulic excavator/breaker)/manual means over areas (exceeding 30 cm (Thirty centimetres) in depth, 1.5 m (One point five metre) in width as well as 10 sqm(Ten square metre) on plan) including getting out and disposal of excavated earth in all leads and lifts in ordinary rock and all kinds of soil including chiseling of hard rocks where blasting is prohibited including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. A recovery of useful stone for 3151.54 cum (Three thousand one hundred fifty one point five four) cubic metre @ Rs. 300/- (Rupees three hundred only) per cubic metre shall be effected on pro-rata basis in Ist running bill from this item. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Excavation work by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains including dressing of sides and ramming of bottoms including getting out the excavated soil and disposal of surplus excavated soil as directed, within all leads and lifts in all kinds of soil including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Construction of embankment and shoulders with approved materials obtained from roadway cutting and excavation of drains and foundation of other structures, graded and compacted to meet requirement of Table 300.1 and 300.2 as per MORD technical specification clause 301.1 as per the direction of Engineer-in-Charge including entire carriage of materials within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Construction of sub grade and earthen shoulder with approved materials obtained from borrow pits, with in all leads and lifts, transporting to site spreading grading to required slope and compacted to meet requirement of table 300.2 as per MORD technical specifications clause 303.1 as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Providing and laying cement concrete 1:3:6 (One cement : three coarse sand : six graded stone aggregate) 20 mm (Twenty millimetre) nominal size in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etcetera including the cost of centering, shuttering and finishing as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Providing and laying in position mechanical mixed and vibrated cement concrete of 1:4:8 (one cement : four coarse sand : eight graded stone aggregate) 40mm ( forty millimetre) nominal size graded stone aggregate for all works upto plinth level including the cost of centering and shuttering including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Back filling behind abutment , wing walls and return walls complete as per drawings & MORD technical specification Clause 1204.3.8 granular material as per direction of Engineer-in-Charge including entire carriage of materials within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Providing weapholes in brick masonry / stone masonry /plain reinforced concrete abutment, wing wall, return wall, retaining wall with 110 mm (One hundred ten millimetre) dia PVC pipe of Supreme/Finolex/Vectus extending through the full with of the structures with slope of 1(v):20(H) towards drawing face complete as per drawing and technical specification including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Providing and laying of boulder apron laid in wire crates with 4mm (Four millimetre) dia G.I.wire conforming to IS:280 and IS:4826 in 100mmx100mm (One hundred into one hundred millimetre) mesh (woven diagonally) including 10% (Ten percent) extra for laps and joints laid with stone boulders weighting not less than 25kg (Twenty five kilogramme) each as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Providing and laying 900mm (Nine hundred millimetre diametre) ( to level and slopes) reinforced cement concrete non pressure pipe I.S.I class NP-3 (Medium duty) for culverts on 1st class bedding of granular material in single row including collar with cement mortar 1:2 (One cement : two coarse sand) but excluding the cost of excavation protection work, back filling, concrete and masonry work in head walls and parapets as per drawing and MORD technical specification clause 1101 and as per direction of Engineer-in-Charge including entire carriage of materials within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Scarifying the existing bituminous road surface to a depth of 150 mm (one hundred fifty milimetre) and disposal of scarified material (with scarifying machine ) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Construction of gravel/soil aggregate sub-base/base by providing well graded material of nominal maximum size grading 80 mm (eighty milimetre) as per Table 2.3 of IRC SP 77-2008, spreading in uniform layers with tractor mount approprate grading arrangements on prepared surface, mixing by mix in place method at OMC with tractor mount appropriate rotavator attachment and compaction with three wheel 80-100 kN ( eighty into hundred ) static roller capacity to achieve the desired density complete as per specifications contained in Para 2.2, 3.6 and 3.7 of IRC SP 77-2008 and as per direction of Engineer-in-Charge including entire carriage of materials within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to 0.075 mm ) ( fifty three millimetres to zero point zero seven five millimetres ) to wet mix macadam (WMM) specification including premixing the material with water at OMC in for all leads & lifts, laying in uniform layers with mechanical paver finisher in sub- base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne ( eight to ten tonne) capacity to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge including entire carriage of materials within all leads and lifts nd other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Providing and applying evenly a priming coat with bitumen emulsion SS-1 on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70 to 1.00kg/sqm (Zero point seven zero to one point zero kilograme per square metre) using mechanical means as per MORD technical specification clasue 502 including carriage of material within all leads and lifts as per direction of the Engineer-in-Charge. The rates are inclusive of octroi, royality, malakana, toll tax, sale tax, GST or other taxes imposed by the Government.
Providing and applying evenly a tack coat with bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 Kg to 0.30 Kg per sqm (Zero point two five to zero point three zero kilogram) per square metre on prepared granular surface treated with primer and cleaned with hydraulic broom as per MORD technical specification clause 503 and as per direction of Engineer-in-Charge including entire carriage of materials within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Providing and laying bituminous macadam using crushed stone aggregates of specified grading premixed with bituminous binder, transported to site by tippers, laid over a previously prepared surface with paver finisher equiped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers as per specifications to achieve the desired compaction and density, 50mm (Fifty millimetre) compacted thickness complete as per specificatons and directions of Engineer-in-Charge with bitumen of grade VG-30 @ 3.50% (Three point five zero percent) (percentage by weight of total mix) prepared in Batch Type Hot Mix Plant of 100-120 (One hundred to one hundred twenty) TPH capacity including entire carriage of materials in all leads and lifts and as per drawings and MORD technical specifications Clause 504 as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Providing and laying 25 mm (Twenty five millimetre) compacted thickness Semi- Dense Bituminous Concrete (SDBC) with bitumen of grade VG- 30 (VISCOSITY GRADE THIRTY) @ 5% (Five percent) (percentage by weight of total mix) and lime filler @ 2% (Two percent) (percentage by weight of Aggregate) prepared in Batch Type Hot Mix Plant of 100-120 TPH capacity using crushed stone aggregates of specified grading, premixed with bituminous binder and filler, transporting the hot mix to work site by tippers, laying with paver finisher equiped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction and density as per specification complete including entire carriage of materials in all leads and lifts and as per drawings and MORD technical specifications Clause 509 as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Construction of Roller Compacted Concrete Pavement (RCCP) of M-30(M-Thirty) grade design mix with coarse and fine aggregate conforming to IS:383, the size of coarse aggregate not exceeding 25mm (Twenty five millimetre) with minimium aggregate cement ration of 5:1mm and with minimum cement content not less than 400kg per cum (four hundred kilogram per cubic metre), aggregate gradation to be as per table 602.2 after blending, mixing in concrete mixer at optimum moisture content, transporting to site, laying with wheel barrows or steel pan or with mechanical paver, compacting with 80-100 KN (eighty-hundred) smooth wheel, tandem vibratory roller to achieve the designed flexural strength, finishing and curing as per drawing and MORD technical specification clause 1502 including entire carriage of materials within all leads and lifts as per the direction of Engineer-in-Charge and other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Providing and fixing 80mm (Eighty millimeter) heavy duty precast cement concrete interlocking paver blocks Grey and red 50% (Fifty percent) each manufactured by the help of hydro vibratory machine having compressive strength of M-50 (M-Fifty) grade as per IS(I-15658-2006 NTC/Modern/Gico/Nitco ISI marked as approved by Engineer-In-Charge including border or kurb blocks grey or coloured. The paver shall be laid on 40mm (Forty millimeter) sand filling packed as per direction by Engineer-In-Charge including entire carriage of material with in all leads, lifts, drawings and MORD technical specifications clause 1504 as per the direction by Engineer-in-Charge and other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Reinforced cement concrete M15 ( M-fifteen ) grade kilometre stone/local stone of standard design as per IRC:8 fixing in position including painting and printing, etcetera 5th Kilometre Stone ( Precast ) as per drawing and MORD Technical Specification Clause 1703 and as per direction of Engineer-in-Charge including entire carriage of materials within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Reinforced cement concrete M15 ( M-fifteen ) grade kilometre stone/local stone of standard design as per IRC:8 fixing in position including painting and printing, etcetera One Kilometre Stone ( Precast ) as per drawing and MORD Technical Specification Clause 1703 and as per direction of Engineer-in-Charge including entire carriage of materials within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Reinforced cement concrete M15 ( M-fifteen ) grade kilometre stone/local stone of standard design as per IRC:8 fixing in position including painting and printing, etcetera 200 (Two hundred) metre Stone ( Precast ) as per drawing and MORD Technical Specification Clause 1703 and as per direction of Engineer-in-Charge including entire carriage of materials within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Reinforced cement concrete M15 ( M-fifteen ) grade boundary pillars/local stone of standard design as per IRC:25, fixed in position including finishing and lettering but excluding painting as per drawing and MORD Technical Specification Clause 1704 and as per direction of Engineer-in-Charge including entire carriage of materials within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Providing and fixing retro-reflectorised Traffic Signs 900x900x900mm (Nine hundred into nine hundred into nine hundred millimetre) triangular of retro reflectorised cautionary, mandatory and informatory signs as per IRC 67 made of encapsulated lens type reflective sheeting wise Clause 1701.2.3 fixed over aluminum sheeting 1.5mm (One point five millimetre) thick supported on a mild steel angle iron (TATA/SAIL) post 75x75x6mm (Seventy five into seventy five into six millimetre) firmly fixed to the ground by means of properly designed foundation with M-15 (M-Fifteen) grade cement concrete 450x450x600, 600mm (Four hundred fifty into four hundred fifty into six hundred ) (six hundred millimetre) below ground level as per drawings and technical specification Clause 1701 including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Providing and fixing retro-reflectorised Signs 600mm (six hundred millimetre) dia circular of retro reflectorised cautionary, mandatory and informatory signs as per IRC 67 made of encapsulated lens type reflective sheeting wise Clause 1701.2.3 fixed over aluminum sheeting 1.5mm (One point five millimetre) thick supported on a mild steel angle iron (TATA/SAIL) post 75x75x6mm (Seventy five into seventy five into six millimetre) firmly fixed to the ground by means of properly designed foundation with M-15 (M-Fifteen) grade cement concrete 450x450x600, 600mm (Four hundred fifty into four hundred fifty into six hundred ) ( six hundred millimetre) below ground level as per drawings and technical specification Clause 801 including entire carriage of materials in all leads and lifts and as per drawings and MORD technical specifications clause 1701 as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Providing and fixing retro-reflectorised Signs 600x450mm (six hundred into four hundred fifty millimetre) dia rectangular of retro reflectorised cautionary, mandatory and informatory signs as per IRC 67 made of encapsulated lens type reflective sheeting wise Clause 1701.2.3 fixed over aluminum sheeting 1.5mm (One point five millimetre) thick supported on a mild steel angle iron (TATA/SAIL) post 75x75x6mm (Seventy five into seventy five into six millimetre) firmly fixed to the ground by means of properly designed foundation with M-15 (M-Fifteen) grade cement concrete 450x450x600x600mm (Four hundred fifty into four hundred fifty into six hundred into six hundred millimetre) below ground level as per drawings and MORD technical specification Clause 1701 including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Providing and erecting direction and place identification signs with size 900x600mm (Nine hundred into six hundred millimetre) semi-reflectorised sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3, fix over aluminum sheeting 2mm (Two millimetre) thick with are not exceeding 0.9sqm (Zero point nine square metre) supported on a mild steel 2 Nos. (Two numbers) single angle iron (TATA/SAIL) post 75x75x6mm (Seventy five into seventy five into six millimetre) firmly fixed to the ground by means of properly designed foundation with M-15 (M-Fifteen) grade cement concrete 450x450x600mm, 600mm (Four hundred fifty into four hundred fifty into six hundred millimetre) (six hundred millimetre) below ground level as per approved drawing and MORD technical specification clause 1701 including entire carriage of materials in all leads and lifts and as per drawings and MORD technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Providing and erecting direction and place identification signs with size 1200x900mm (Twelve hundred into nine hundred millimetre) semi-reflectorised sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3, fix over aluminum sheeting 2mm (Two millimetre) thick with area exceeding 0.9sqm (Zero point nine square metre) supported on a mild steel 2 Nos. (Two numbers) single angle iron (TATA/SAIL) post 75x75x6mm (Seventy five into seventy five into six millimetre) firmly fixed to the ground by means of properly designed foundation with M-15 (M-Fifteen) grade cement concrete 450x450x600mm, 600mm (Four hundred fifty into four hundred fifty into six hundred millimetre), (six hundred millimetre) below ground level as per approved drawing and MORD technical specification clause 1701 including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Providing and applying 2.5 mm (Two point five millimetre) thick road marking strips (retro- reflective) of specified shade/ colour using hot thermoplastic material by fully/ semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads @ 250gms per sqm (two hundred fifty grams per square metres) area thickness of 2.50mm ( two point five zero millimetres) is exclusive of surface applied glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etcetera complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Providing and fixing Road Cat Eyes complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Providing and fixing of road stud 100x100mm (one hundred into one hundred) millimetres dia cast in aluminium resistant to corrosive effect of salt and grit fitted with lense reflectors installed in concrete or asphaltic surface by drilling holes 30mm (thirty) millimetres upto a depth of 600mm (six hundred) millimtres and bedded in a suitable bituminious grout or epoxy mortar all as per BS:873 (Part4) 1973 complete including entire carriage of material with in all leads, lifts, drawings, technical specifications as per direction by Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Provision of 15 (Fifteen) Nos. Rumble Strips cover with premix bituminous carpet, 15-20mm (Fifteen to twenty millimetre) high at centre, 250mm (Two hundred fifty millimetre) wide placed at 1m (One metre) centre to centre at approved locations to control speed, marked with white strips of road marking paint. Taking output 100 sqm (One hundred square metre) (including gaps) complete including entire carriage of material with in all leads, lifts, drawings, technical specifications as per direction by Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Providing and casting parapet with PCC M-10 (M-Ten) for nominal mix 1:3:6 (One cement : three sand : six graded crushed stone aggregate) 40mm (Forty millimetre) nominal size as per drawing & MORD technical specification clauses 800 and 1200.4 including excavation in earthen work 15cm (Fifteen centimetre) deep complete including entire carriage of material with in all leads, lifts, drawings, technical specifications as per direction by Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Providing and erecting “W” metal beams crash barrier comprising fo 3mm (three millimeter) thick corrugated sheet metal beam rail, 70cm (seventy centimeters) above road/ground level, fixed on ISMC series channel vertical post 150x75x5mm (One hundred fifty into seventy five into five millimeter) spaced 2.00 mtr (two metre) center to center 1.8 mtr. Height (One point eight) 1.1 mtr. (one point one) below ground/ road level, all steel parts and fitments to be galvanized by hot dip process, all fittings to conform to IS:1367 (one thousand three hundred sixty seven) and IS 1364 (one thousand three hundred sixty four) metal beam rail to be fixed on the vertical post with a spacer of channel section 150x75x5mm (One hundred fifty into seventy five into five millimeter), 330mm (three hundred thirty millimeter) long complete as per direction of the Engineer-in-Charge including carriage of material within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Routine maintenance for five years after completion of construction work as per item and condition of bid document of contract to general condtion of contract and technical specification of MoRD including haulage carriage of all labour transport and material to various location of site through all modes of transportations with in all leads lifts and other incidentals to entire satisfaction of Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
1. Maintenace cost for 1st year (First Year) Km. 0/0 to 12/0 Rate P Km=122720 Total Amount=1472640
2. Maintenance cost for 2nd year (Second year) Km. 0/0 to 12/0 Rate P Km=128620 Total Amount=1543440
3. Maintenance cost for 3rd year (Third year) .Km. 0/0 to 12/0 Rate P Km=134520 Total Amount=1614240
4. Maintenance cost for 4th year (Fourth year) Km. 0/0 to 12/0 Rate P Km=141600 Total Amount=1699200
5. Maintenance cost for 5th year (Fifth year) .Km. 0/0 to 12/0 Rate P Km=148680 Total Amount=1784160
S.S.Chauhans Construction Private Limted
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid