Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹33.7 LAccepted-AOC AT JHIRKEY PO KATHARA DIST BOKARO JHARKHAND | KATHARA | BOKARO | JHARKHAND | 829116 | ₹33.7 L Quoted ₹28.6 L | L1 | Accepted-AOC accepted as per nit |
| 2 | L2₹29.0 LRejected-Finance NEAR UCO BANK PHUSRO BAZAR BERMO JHARKHAND 829144 | BOKARO | JHARKHAND | 829144 | ₹29.0 L | L2 | Rejected-Finance REJECTED AS PER NIT |
| 3 | Rejected-Technical AT JHIRKEY PO KATHARA BOKARO | KATHARA | BOKARO | JH | 829116 | - | - | Rejected-Technical Technically Rejected as per NIT |
| Sl No | Description | Qty | Unit | M.L. Enterprises L2 | M S ENTERPRISES L1 |
|---|---|---|---|---|---|
| 1.01 | Shifting of Pump-Motor set with electricals (3 Pump-Motor set x 15 No.) | 45 | No. | 20,000 ₹9 L | 20,301.2 ₹9.1 L |
| 1.02 | Cutting-Welding (moon cutting) of Suction for vibration-free fitting and proper support (3No. x 15) | 45 | No. | 2,250 ₹1.0 L | 2,259.62 ₹1.0 L |
| 1.03 | Dismantling work i.e Cutting of 8" dia. pipe 400 metres (200 joints x 64cm = 9600cm) | 12,800 | cm | 4 ₹51,200 | 3.02 ₹38,656 |
| 1.04 | Welding of pipe to pipe 8" dia. As per instruction of engineer in charge. [150 Nos of joints x 64cm x 2layer=19200cm] | 25,600 | cm | 5 ₹1.3 L | 3.89 ₹99,584 |
| 1.05 | Dismantling work i.e Cutting of 10" dia. pipe 400 metres (200 joints x 80cm = 16000cm) | 16,000 | cm | 4 ₹64,000 | 3.4 ₹54,400 |
| 1.06 | Welding of pipe to pipe 10" dia. As per instruction of engineer in charge. [135 Nos of joints x 64cm x 2layer=32000cm] | 32,000 | cm | 5 ₹1.6 L | 4.02 ₹1.3 L |
| 1.07 | Laying in position of 8" dia. Pipe; 1000m
(considering 40m each shifting) | 1,000 | m | 300 ₹3 L | 283.3 ₹2.8 L |
| 1.08 | Laying in position of 10" dia. Pipe; 800m
(considering 40m each shifting) | 800 | m | 350 ₹2.8 L | 339.68 ₹2.7 L |
| 1.09 | Making and fitting of 8" bend from pipe of length 2.5mtr approx using cutting & welding | 24 | No. | 2,500 ₹60,000 | 5,152.71 ₹1.2 L |
| 1.10 | Making and fitting of reducer (10" to 8") of length 2.5 ft | 16 | No. | 2,000 ₹32,000 | 2,094 ₹33,504 |
Tender Value
Refer Docs
EMD Value
₹38,400
Closing Date
26 Mar 2026, 4:00 pmClosed
Project Engineer (EnM), Kathara Colliery
P.E. (EnM), Office of the PO, Kathara Colliery
Dismantling, laying and diversion of 3 range of 8 in (1000m) and 10 in (800m) diameter pipeline with all electrical accessories(6.6KV starter-VCB) for multiple Shifting (stepping up and lowering down) of Pump-Motor set for a period of 12 months(365 d
2026_CCL_356821_1
KTC/PE/EnM/25-26/128 Date-16.03.2026
Open Tender
Miscellaneous Works
365 days
P.E. (EnM), Office of the PO, Kathara Colliery
As per NIT
5 documents required · 5 mandatory
₹38,400
Yes
31 Mar 2026
16 Mar 2026
27 Mar 2026
16 Mar 2026
26 Mar 2026
16 Mar 2026
16 Mar 2026 - 23 Mar 2026
Shifting of Pump-Motor set with electricals (3 Pump-Motor set x 15 No.)
Cutting-Welding (moon cutting) of Suction for vibration-free fitting and proper support (3No. x 15)
Dismantling work i.e Cutting of 8" dia. pipe 400 metres (200 joints x 64cm = 9600cm)
Welding of pipe to pipe 8" dia. As per instruction of engineer in charge. [150 Nos of joints x 64cm x 2layer=19200cm]
Dismantling work i.e Cutting of 10" dia. pipe 400 metres (200 joints x 80cm = 16000cm)
Welding of pipe to pipe 10" dia. As per instruction of engineer in charge. [135 Nos of joints x 64cm x 2layer=32000cm]
Laying in position of 8" dia. Pipe; 1000m (considering 40m each shifting)
Laying in position of 10" dia. Pipe; 800m (considering 40m each shifting)
Making and fitting of 8" bend from pipe of length 2.5mtr approx using cutting & welding
Making and fitting of reducer (10" to 8") of length 2.5 ft
Loading, unloading & carriage of 8" dia. Pipe : 1000m
Loading, unloading & carriage of 10" dia. Pipe : 800m
Supply and Fixing of flange of 8" diameter with collar including rubber insertions Flange specs : As per BS 10 table D standard (thicknes shoud be 16mm or above)
Supply and Fixing of flange of 10" diameter with collar including rubber insertions Flange specs : As per BS 10 table D standard (thicknes shoud be 16mm or above)
Supply of MS nut bolts with washer size 5/8" x 4" Full thread
Supply of MS nut bolts with washer size 5/8" x 3" Full thread
Supply of MS nut bolts with washer size 5/8" x 2 1/2" Full thread
Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m. ordinary Rock (1200mx0.8mx0.8m = 768CUM)
Total impact of GST for the purpose of CTC
Please Enable Macros to View BoQ information
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 1.98 MB
BOQ_369685.xls
BOQ • 0.29 MB
Download all tender documents and submit your bid