PROVN OF CERTAIN MINOR WORKS IN THE AOR OF AGE B/R-I UNDER GE (EAST) DELHI CANTT-10

Amount

Taking down chowkats or frames with shutters (without taking off shutters from the frames) any type and size not exc. 1.5 Sqm each complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) any type and size exc. 1.5 Sqm but n. exc. 4.00 Sqm each complete all as specified and directed.

Demolition of Brickwork but built in Cement Mortar complete all as speicified and directed

M&l Brick work with subclass‘B’ bricks, straight or curved on plan exc 6m mean radius, built in C:M 1:4 complete all as specified and directed built in Cement Mortatr including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed

Supply 10 mm thick Toughned glass fixed as in doors, windows, partitions and similar work including cutting to shape, drilling holes required icluding frosted on one side etc complete all as specified and directed

Supply and fixing factory made uPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.90 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Glass/ wire mess shall be paid separately). (Note: The unit rate quoted by contractor include all other connected accessories. Net Opening will be measured lor payment purpose and for uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.)

Providing and fixing factory made uPVG white colour Sliding window Three track with provision of ac made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories.(Note: The unit rate quoted by contractor Includes cost of glass 5.5mm and wire mesh and includes all other connected accessories. Net Opening will be measured payment purpose.)

Taking down cement or cement lime plaster of any description on brick or stone walls and concrete surface of ceiling etc including raking out joints hacking for key scrubbing down with water etc complete all as specified and directed.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished even and fair complete all as specified and directed .

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 and finished even and fair complete all as specified and directed by Engr-in-Charge.

M&L for rendering 5 mm thick on ceiling surfaces fair faces of brick work or concrete surfaces in cement mortar 1:3 and finished even and fair complete all as specified and directed by Engr-in-Charge.

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep Iin soft and loose soil and getting out Compelte all as speicified and directed

M&L for 75mm thick cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate as in sub base complete all as specified and directed.

M&L for pre-polished Machine pressed precast concrete interlocking paver block any shape and size conforming to IS 15658-2006 of 80 mm thickness, M-40 Grade with grey cement with grey cement and no pigment over and including 50mm thick sand complete all as specified and directed.

M&L for Providing, cement concrete 1:2:4 type B1 using 20mm graded stone aggregate in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed.

Dismantling/ taking out of existing roof tretment with APP membrane of any thickness including taking out existing sreed bed with all necessary arrangements complete all as specified and as directed.

M&L providing and applying the plaster with single component ready to use polymer repair mortar capable of applying 20 mm average thickness in single layer and finishing with trowel with a bond coat : SBR polymer (@ 10% of cement weight) modified cementious bond coat @ 2.2 kg cement/Sqm of surface of mortar complete all as specified and as directed. Make: Smartcare of Asian Paints/ Sikka/ Fosroc /STP Ltd. Note : The application shall be executed on any type of surface and on horizontal/Vertical areas.

Providing and applying Dampproof, a fibre reinforced elastomeric liquid water proofing membrane formulated with reinforcing acrylic fibers having Sun Reflectivity Index (SRI) of 105 on horizontal/vertical surfaces of roof/wall/chajjas in multiple coats @ 2.0 litre/sqm. Primary coat is self-priming coat of elastomeric waterproofing liquid (dilution with water in the ratio of 3:1, damp proof : water) and other coats to be applied undiluted. The coating needs to be reinforced with 40 GSM geotextile, to sandwiched between 2nd & 3rd coat of coating. The application shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes complete in all respect as per the direction of Engineer-in-Charge. Make: Smart Care Damp Proof of Asian Paints or equivalent in Fosroc/SIKA/ STP. Notes: (1) The work shall be executed through authorised applicator of manufacturer only. (2) Authrised Applicator shall be approved by GE before starting of work. (3) All materials shall be procured directly form manufacturer. Guarantee: The contractor shall furnish a written guarantee for the effectiveness of the water proofing treatment for a period of Eight years in favour of the GE. A sum equivalent to 2.5% (Two point Five Percent) of the cost of water proofing treatment shall be retained by the Govt from the contractor’s dues as security deposit. The contractor may, however, furnish a fixed deposit receipt in lieu from a Schedule bank pledged in favour of Garrison Engineer. (e) Full quantity of water proofing chemical / paint shall be entered in MB as "NOT TO BE ABSTRACTED".

M & L for preparation of new plastered surfaces of walls applying 2mm thick wall care white putty and scrapping surface area to obtain smooth finishing applying two coat of internal acrylic emulsion over a coat of internal primer complete all as specified and directed.

M&L Virified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished ( Design/pattern in flooring as approved by GE) , area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM 1:6 including dimantling floor, hearth or wall tiling including cement mortar bedding but not backing and rubbish off the premises complete all as specified and directed

All as Srl item No 21 here-in-before but on vertical surface such as in skirting/dado etc over 10mm thick rendering CM (1:4) complete .

M &L Glazed ceramic tiles in vertical surface 600x300x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick rendering in CM 1:4 including dimantling floor, hearth or wall tiling including cement mortar bedding but not backing and rubbish off the premises complete all as specified and directed

M & L Non skid coloured ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or Coloured cement to match laid over & including 15 mm thick avg screed bed in CM 1:6 including dimantling floor, hearth or wall tiling including cement mortar bedding but not backing and rubbish off the premises complete all as specified and directed

S & F in repairs Vitreous china floor mounted WC ( Cascade) one piece type (off white) including connecetion in drain etc incl water closet seat cover , flushing cistern, with P or S trap with all fitting and fixture complete all as specified and as directed. (Make : Jaquar cat part No. SLS WHT 6851S300PP or equivalent in Hindware/Parryware /Cera).

S & F in repairs ready made wall / floor mounted Vanity box made of HDHMR board, both side laminated and front side melamine surface, consisting of the following combination :- (a) Wash Hand Basin 620 mm x 460 mm including brass waste cupling (b) Base Cabinet 585 mm x 445 mm x 480 mm. Make : Hindware - DTC brand (Element Soft OAK color) or equivalent make in Bathsense of Asian Paint/Cera

M&L WPC decorative wall panels/louvers 15 to 25 mm thick design patern wood grain teak finished (colour and design as approved by GE) prelaminated inclusive of fixing on to wall including moulding end caps with L / U beading etc fixed with PVC sleeves and screws as required at site complete all as specified and as directed.

Demolition of Reinforced Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed

Taking up or down 15mm steel tubing and connections including cleaning for refixing or removal to store

S&F 15mm bore water tubing , medium grade , galvanised with all fitting laid in trenches/wall complete all as specified and directed.

S & F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge. ( Note :- Glass/ ACP paneel/ partical board shall be paid separately)

S&F 12 mm thick prelaminated particle board exterior grade, prelaminated both side with decorative choice lamination fixed with aluminium partition, door cupboad etc complete all as specified and directed

S & F plain gypsum board panel 12 mm thick on ceiling ( Any Design & pattern as approved by GE) with and including necessary GI frame work for seamless ceiling used with ' T ' , channel or any section including screws , cleats ,fasteners, clips and all required accessories , hangers etc of galvanized steel all as per manufacturer design conforming to IS-2095 and 2542(1981) the weight of the board shall be not less than 7 kg per sqm and including dismantling of walls and celing existing old board (fibre pulp.insulation etc)or insulation boards/slabs/blanks any thickness including cover fillets etc including two coat of OBD over a coat of putty complete all as specified and directed.

S & F in repair 110 mm PVC (SWR) pipes single socketed in any length with rubber ring joint laid in trenches or in floor or in wall completed all as specified and directed

S & F repair 110 mm PVC (SWR) bends with oval access door completed all as specified and directed

Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth for foundations etc or for shafts, wells cesspits, manholes, pier holes, drain etc n.exc 10 Sqm on plan and n.exc 1.5m in depth and getting out in soft/ loose soil complete all as specified and directed by Engr-in- Charge.

Returning & filling including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed.

Removal of excavated material n.exc 50 mtr and depositing where directed at level not exc 1.5 m above the starting point complete all as specified and directed by Engr-in-Charge.

M&L for PCC (1:3:6) type D-2 using 40mm graded stone aggregate as in foundation etc, complete all as specified & directed

S&F DWCPE (SN8) nominal size 150 mm (internal dia) mm including all fixing accessories or fittings like socket/spigot joint with elastomeric sealing ring, rubber ring, SILAID rubber lubricants required for laying of pipes, laid in trenches, complete all as specified and as directed.

M&L for concrete bed to drain pipe including packing under and haunching against the side of pipes, 150mm bore, in cement concrete (1:3:6) type C-2 (using 40mm graded stone aggregate) after laying and testing of pipe complete all as specified and directed.

M&L for pre-cast reinforced cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate as in manholes cover, drain cover and set in cement mortar (1:4) including form work complete all as specified & directed.

M&L PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) in surface channels and drains complete all as specified & directed.

M & L for Brick work with sub class ‘B’ bricks, straight or curved on plan exceeding 6 m mean radius built in CM 1:6 complete all as specified and directed .

M & L for extra for forming fair finished drain or channel 45 cm inner grith in cement concrete , using extra cement, including forms, moulds, mi-tred/ stopped ends etc complete all as specified and directed.

M&L PCC (1:2:4) type B-1 using 20 mm graded stone aggregate as in brenching for manholes, bands, coping, bed plate etc with slightly chamfered or rounded angles including necessary from work, if any, and finishing exposed surface even and smooth without using extra cement complete all as specified & directed.

S&F Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed

M&L two coat of synthetic enamel paint (finishing coat) over one coat of primer to new steel surfaces of any description over 10 cm width or girth incl prepration of surfaces complete all as specified.

Demolition of concrete (unreinforced) in concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed

Taking up or down 20 mm mm bore steel tubing and connections from any position etc including cleaning for refixing or removal to store complete all as specified.

Taking up or down 25 mm mm bore steel tubing and connections from any position etc including cleaning for refixing or removal to store complete all as specified.

S&F 20 mm bore medium grade steel water tubing galvanised with all fittings such as tee, elbow, socket, union etc. and fixed complete to walls and ceiling or laid in floors/roofs, complete all as specified and directed.

S&F 25 mm bore medium grade steel water tubing galvanised with all fittings such as tee, elbow, socket, union etc. and fixed complete to walls and ceiling or laid in floors/roofs, complete all as specified and directed.

M & L Granite (of any type) stone/ tiles 18mm to 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 20 mm thick screed bed in CM 1:6 complete all as specified and directed

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, in soft /loose soil complete all as specified and directed

Pre-painted galvalume aluminum zinc coating GI based corrugated sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed

S& F Mild Steel work in rafter , purlin, and other connected work including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed

S&F in Brass CP sink mixer with swinging spout (wall mounted model with connecting legs & wall flangesfor making hot and cold water fixed as per manufacturers manual with long shunk and cup washers, screwed both ends suitable for 15mm bore GI Pipe joints to GI pipes or unions, complete all as specified and directed. Make : Jaquar Continental CON-CHR-309 KNM or equivalent as per list of make.

S&F in sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm including 40 mm waste fittings, brass chromium plated with long screwed shanks and fly nuts flange end bedded in red lead cementand other end fixed etc complete all as completed and specified.

S & F Rotational moulded polyethylene water storage tanks 1000 lts capacity, triple layered (cylindrical vertical with closed top) hoisted and fixed in position including 20 mm dia PTMT ball valves, high pressure, with polythene float and fly nut and 20 mm gate valve complete, screwed for iron pipe or brass ferrule and fixed including taking out existing unserviceable overhead tank of any description complete all as completed and specified.

M&L Pressed steel frames for doors 125X60MM with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified & directed

M&L Pressed steel frames for doors 105X60MM with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified & directed

Providing and fixing factory made uPVG white colour Sliding window Three track with provision of ac made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories complete all as specified & directed. (Note: The unit rate quoted by contractor Includes cost of glass 5.5mm and wire mesh and includes all other connected accessories. Net Opening will be measured payment purpose.)

M&L Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified & directed

M&L Glazed and Skelton shutters using 2nd class hard wood, 35mm thick open rebated and prepared to receive glass or gauge etc., edges of framing plain and chamfered or fitted with cut or mitered beads for securing glass or gauze, size of member of shutter as specified in SSR Part-I section 8, clause 8.23(a) and divided in square complete all as specified and as directed.

M&L Factory made Flush door shutters 30mm thick solid core construction, with block board core and plywood face panels, commercial type on both sides, complete all as specified and as directed.

M&L 100mm size stainless steel butt hinges (medium weight) colled rolled mild steel, complete all as specified and as directed.

M&L Aluminium anodized 150mm size barrel tower bolt of extruded section and fixed, complete all as specified and as directed.

M&L 300 mm size aluminium alloy anodised sliding door bolt with haps, staple ( bolt type ) and fixing clips of sheet, cast of extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy, complete all as specified and as directed.

M&L two coat of synthetic enamel paint (finishing coat) over one coat of pink primer to new wood surfaces of any description over 10 cm width or girth incl prepration of surfaces complete all as specified.

M&L Galvanised mild steel wire cloth 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanised wire staples complete all as specified.

Cutting in to existing manholes for connecting new drains, making good to pipe & rendering cutting out existing benching for and forming branch channel in cement concrete1:2:4 type B-1 smooth finished and reforming benching as required for 150 mm bore drain pipe complete all as specified and as directed.

M& L for PCC 1:4:8 type D2 (using 40 mm grade stone aggregate) as in bed to drain pipe 150 mm bore including forming cradles complte all as specified and directed.

M&L for PCC 1:4:8 type D2 using 40 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed by Engr-in-Charge.

S&F in repair vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) complete all as specified and directed

S&F in repair Plastic valveless,syphonic action type, flushing cistern, low level,white, with inlet, ball valve,float and handle including bracket complete all as specified and directed

S&F in repair Bib tap Cast copper alloy chromium plated fancy type with crutch or butterfly handle screwed down scrwed for iron pipe or for brass ferrule complete all as specifed and directed. (Make: as per list of makes)

S&F in repair vitreous china wash basin, white , flat back , size 550 x400mm including 32 mm waste coupling excluding taps, waste, chain and plug and porcelain stopper but including brackets complete all as specified and directed.

M & L with fabrication & fixing to horizontal & vertical shelves/ partations /sides/ top/ bottom/ etc for Modular kitchen cabinate/ wardrobe/ cupboard/drawers made out of 17/18 mm thick WPC boards depths 45cm to 70cm with white laminated colour on inside and all the outer faces to be covered with glossy laminate Color as approved by GE and paste to all exposed edge by edge Banding Tape and SS soft closing hinges, G/C/J profile handle etc and after provision of cabinet for keeping baskets/ drawers etc and including taking down old any type cupboards , shelves etc all as specified and directed. (Design and pattern as approved by GE). (Make: Action tesa or equivalent) Front Face shall be measured for payment per sqm irrespective of total area of boards average area of board shall be 4.50 sqm and the contractor is reqd to quoted rate accorginly used.

S&F Stainless steel basket (plain) of size 370mm x 485mm x 150mm made of min 4mmdia stainless steel wire approved quality with suitable arrangement for fixing telescopic basket over and including telescopic channel 18 inches/ 20 inches in length two way extruded MS galvanised over rollers as approved by Engr-in-Charge. (Make: Godrej Cat art No 6121 or equivalent in IPSA/Hettich).

Stainless steel thali basket of size 370mm x 485mm x 200 mm made of min 4mmdia stainless steel wire of approved quality with suitable arrangement for fixing telescopic basket over telescopic channel 18 inches/20 inches in length two way extruded MS galvanised over rollers as approved by Engr-in-Charge. (Make: Godrej Cat part No 6136 or equivalent in IPSA/ Hettich).

S&F Stainless steel Cutlary basket of size 370mm x 485mm x 100mm made of min 4mmdia stainless steel wire and bottom of S S perforated sheet approved quality with suitable arrangement for fixing telescopic basket over and including telescopic channel 18 inches/ 20 inches in length two way extruded MS galvanised over rollers as approved by Engr-in-Charge. (Make: Godrej Cat part No 6132, or equivalent in IPSA/ Hettich).

S&F repair 75 mm bore PVC (SWR) pipes single socketed , in any length with rubber ring joints ,laid in trenches or in floor or in wall complete all as specifed and directed.

S & F in repair 110 mm dia PVC cowls

S&F in repairs wall mixer 2-in-1 system with provision for overhead shower complete with 115 mm long bend pipe, connecting legs wall flange(excluding showers) of cast copper alloy , fancy type , chromium plated, and mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and as directed. (Make : Hindware cat part No. FUS-CHR-29281 or equivalent as per list of makes).

S&F in repair Chromium plated shower roses with or without swivel joints of size 125mm including shower arm fixing to steel peipe or union complete all as spd & directed (Make:as per list of makes)

S & F in repair Two way Angle valve 15mm bore dia or pipe, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions, fixed in repairs, complete all as specified and as directed. Make - Jaquar /hindware or equivalent as per list of makes

S&F PVC connection 15mm sizes with PTMT nuts of length 600 mm complete all as specified and directed.

M& l for Preparing surfaces plastered or unplastered walls and ceiling applying two coats of dry distemper, white or tinted over a coat of interior primer complete all as specified and as directed

M & L for steel windows fabricated from roll formed sections made of galvanized steel colour coated powder coated (Base steel as per IS-513 D quality galvanized as IS 277 with zinc coating of 120 GSM with total coated thickness of 0.60mm. The coated section shall be with primer coated of primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer of 5-7 microns or powder coated with pure polyester powder upto 50-60microns thick with the following specifications :- (a) Main frame 72mm x 55mmx0.58mm (b) Mullion 72mmx50mm x0.58mm (c) Glazed /guazed shutter frame 47mmx20.20mmx0.58mm (d) Glass beads size 12mmx12mmx0.58mm Accessories. Each shutter shall be provided with the following fittings :- (i) Stainless steel pipe of hinges 01 set (ii) Aluminium powder coated handle-04 Nos . (iii) Glass panes Glazed shutter and fixed glass provided with glass of 5.00mm thick float glass . (iv) Wire Mesh –Stainless steel wire mesh of 0.3 mm nominal dia of wire and average width of aperture 1.40mm. (v) Grills window shall be provided with grill made of 10mm square MS bars welded to 12mmx6mm thick MS plate . Distance between bars should not be more than 12cm c/c. Total grill unit shall be enamel painted and fixed to window frame with screw. Note: The glazed/Guaged shutter including guard bars shall be measure once i.e. as per area of opening. No separate payment of separate shutter i.e. glazed and fly proof and guard bars shall be made. Area of shutter shall be the area of opening. Rate of Wiremesh and glass is included in the quoted rate.Make- NCL

Dismantling of mild steel work of any description and in any position complete all as specified and directed

S & F framed work such as in doors, ladder, frame work for water tank,grills and gratings, gusset plates, steel sheeting and other similar kind of work complete conformin to E-250 etc complete all as specified.

S&F Supply 8 mm thick Toughned glass fixed as in doors, windows, partitions and similar work including cutting to shape, drilling holes required including frosted on one side etc complete all as specified and directed

S & F 12 mm thick Toughned glass as in hinged doors / as in floor door closer door type, partitions, automatic doors. Sliding door, fixed portion and similar work including cutting to shape, drilling holes and including frame work for channel and ss handels , locking sysytem with keys required etc complete all as specified and directed

S & F anodised aluminium door shutters, poweder coating of any colour aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified.

S & F for Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed etc complete all as specifed and directed.

M&L for 75 mm thick in Plain cement concrete type C2 (1:3:6) (using 40 mm graded aggregate) as in plinth protection and sub base laid in alternate bays (not exceeding 2 Sqm each) finished even and smooth at top without using extra cement and providing joints throughout the thickness of plinth protection, filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight all as directed at site.

M&L for Pre Polished Cement Chequered Concrete Outdoor tiles 300x300 x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and no pigment over and including screed bed or bedding layer of 15mm thick in CM 1:6 complete all as specified and directed.

M&L for repairing of spalled concrete from rcc surfaces such as ceiling,beam, column, parapet, chajja etc in the following stages:- (i) Preparation of exisitng surfaces like chipping of unsound weak/loose concrete with electric hammer/manually including tapping all edges, making square shoulders of cavity etc not exceeding 50mm thickness , removal of debris complete all as specifiedRemoving plaster & finishes from all exposed / damaged portion of facia, roof projection, parapet, chajjas , over hanging slabs, columns, slabs & beams. (II) Applying rust remover cum passivator sikka rust top 100 or equivalent at the rate of 0.2kg/sqm each coat as per manufacturer instructiosn to remove rust from exisitng reinforcementRemoving visible rust along the length of reinforcement using hand tools as approved. (iii) Mixing and applying two components epoxy reisn concrete bonding coat of sikkadur(R&B)42 or equivalent at the rate of 0.4kg/sqm (mixinbg prooprtion as per manufacturer instrucuion including preparation of surface by chipping and throughly cleaning of surfaces complete whether required over new reinforcement and as directed by engineer in charge the reinforcement shalll be measured seperaterly. (iv) Applying a prebatched one component polymer modiifed cementitous patch repair mortar not excedding 50 mm in layer of 15mm thick each of product sikka monotop 122 F or equivalent as per manufaacturer instruction to match the exisiting surface. Note :- This item will be also executed in highrise bldgs and necessary provision for T&P, scaffoling and safety measures etc shall deemed to be included in unit rate quoted by the tenderer for the same.)

M & L for preparation of old/new plastered surfaces of walls, pillers,ceiling cornices etc by scrapping down smoke soot, moulds, moss, efflorescent salts , trading oil and greasy spots and including cracks/holes in surface filling with white putty and scrapped surface area to obtain smooth finishing with wall care putty as required and applying two coat of external acrylic emulsion complete all as specified and directed.

M & L for preparation of of old/new plastered/unplastered surfaces 2mm thick applying wall care putty as required on internal surfaces of wall/ceilling including preparaing the surface even and smooth by sander etc and providing two coat of 1st quality acrylic Emulsion (ready mixed) having VOC content less than 50 gms/litre, over a coat of primer of approved manufacturer, of required shade and colour complete, as per manufacturer's specification and using roller brush , complete all as specified and directed by Engineer-in-Charge

S & F in repair Vitreous China Urinal, full stall type Urinal inlcuding cp urinal spreader With Fixing Accessories, white and fixed complete all as specified and directed. (Make : Jaquar cat part No.URS-WHT-13261 and equivalent in jaquar / Hindware/Parryware or equivalent make as per approved make list).

S&F in repair Brass CP Basin mixer central hole for making hot and cold water fixed as per manufacturers manual with long shunk and cup washers, screwed both ends suitable for 15mm bore GI Pipe joints to GI pipes or unions, complete all as specified and directed. Make : Jaquar Continental CON-CHR-167KNB and equivalent as per list of makes.

S&F in repairs Hand Shower (Health Faucet) with 8 mm Dia, 1 Meter Long Flexible Tube & Wall Hook completed all as specified Make : Jaquar Cat part No. ALD-CHR-573 and equivalent in jaquar / Hindware/Parryware or equivalent as per list of makes)

S&F in repair 15mm Urinal Valve Auto Closing System with Built-in Control Cock & Wall Flange screwed both ends for iron pipe or for unions for 15mm bore steel tubing complete all as specified & directed. Make : Jaqaur Cat Part No. PRS-CHR-077 or equivalent as per list of makes

S & F in repair CP Towel Ring Round with Round Flange fixed in positon with and including chromium plated brass screws and wooden/plastic cleats, complete all as specified and as directed. (Makes: as per list of makes)

S&F in repairs of CP towel rail 600mm long fixed with and including chromium plated brass screws and and wooden/plastic cleats (minimum weight 190 gms) fixed on walls, complete all as specified. (Makes: as per list of makes)

S&F in repair fancy type chromium plated quarter turn brass angle valve type suitable for 15mm bore pipe complete all as specified Make: Jaquar FLR 15053PM or equivalent as per list of makes.

S& F for provn of E-board 4mmthick self design type tiles ceiling on Aluminium Grid of make(Armstrong or equivalent) frame work with the following specification including cutting holes to brick wall built in cement mortar & making good in cm 1:3 of cement concrete 1:2:4 type BO as required :-(a) Plugging to wall around the rooms & supplying & fixing Al Powder coated angle of size 25x25x1.0 mm (b) 1.60mm dia GI wire suspenders with adjustable clamps including fixing to ceiling dash free fasterers (c) 25mm x 25mm x 1.5mm Al coated tee as in main & cross members at 595mm c/c supported suspenders alongwith adjustable clamp to maintain level . ( d) E-board 4mmthick self design type ceiling tiles of size 610mm x610mm conforming to relevant IS in squares of GI Powder coated Tee with clips made to shape. Shade and pattern of E- board shall be as approved by GE

S & F HPL Sheet exterior glossy ( colour & design as approved by GE) of 6 mm thick joint with Silicon/ adhesive as per manufacturer instruction including necessary aluminium framed work as required shape and size by welding etc fixing to wall / ceiling/ RCC column/boarding/Gates/ Name Plates on gates with necessary fixing arrangements upto a height of 10 Mtrs complete all as specified and as directed.

S & F for 2 mm thick fibre glass reinforced translucent corrugated sheeting with additional reinforcement of chicken mess with two corrugation side lap fixed with 'L' or 'J' type or crancked hook bolts, complete all as specified and directed.

S & F 5 mm thick sheet glass, ordinary quality and glazed in square fixed complete all as specified and directed.

M & L for RCC M-25 Nominal mix as in Beams, cantilevers, slabs, Chajjas etc complete all as specified and directed by Engr-in-Charge.

M & L for form work to sides and soffits of beam hauchings, girders, bressummers, lintels, slabs,cantilevers, shelves including supports, overhangs, finished surfaces complete all as specified and directed by Engr -in Charge.

M & L for Mild steel TMT bars 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips etc complete all as specified and directed by Engr-in-Charge.

All as per item No 115 but 6mm to 8mm dia.

S & F Aluminium alloy powder coated windows Three track three panels sliding window with fly proof S.S wire mesh shutter (Two nos. glazed & one no. wire mesh panels) including aluminum powder coated inner and outer frame for sliding track, bottom , sides and top weight not less than 0.75 Kg/ RM, double revated and 0.40 Kg/RM for window shutter sliding type with aluminium sections as per series - B (18mm) 3 track of Jindal section and equivalent in others, numbers for sliding windwos with framed shutter including aluminium allow powder coated snap type beads, handles with locking arrangement spring action and glazing clip joint cleats rubber gaskets etc including all standard fittings, hinges, handles, 5.5 mm glass and wire mesh for panels complete all as specified and as directed.

M&L applying two coats of oil bound distemper over a coat of interior primer on new plastered surfaces of walls and ceiling surface complete all as specified and directed

Taking down shutter and refixing in same opening after easing and adjusting, area of shutter exc 1 sqm but nexc 2 sqm each complete all as spd

S&F in repair Wall mixture with CP Telephonic shower pipe fixed over wall surface as per manufacturets mannual and Square Over Head shower (200mmx200mm) including easy flex shower tube with hand shower 68mm dia round shape single flow (ABS body chrome plated with rubit cleaning system etc complete all as specifed and directed Make : JAQUAR SHFLR 5281N or Hindware equvalent.

M & L for 18 to 20 mm thick granite (of any type) work( table rubbed and polished) in jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite slab including 15 mm thick rendering/ screed bed in CM 1:4 including rounding to edge of granite as per required and including dismantling of existing granite of any description including cement mortar bedding (but not backing ) and rubbish off the premises complete all as specified and directed.

S&F in repair PVC waste pipe 32mm dia 60 cm long suitable for WHB/Sink complete

S&F in repair sheet glass shelf assembly consisting of 5.5mm thk sheet glass shelf 12cm wide with CP bracket guard and railing 60cm long complete all as specified and directed (Makes: as per list of makes)

S&F in repair 125 mm size Brass chromium plated shower rose suitable for 15 mm bore pipe complete all as specified and directed. (Makes: as per list of makes)

S & F in repair Two way bib tap 15mm bore dia or pipe, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions, fixed in repairs, complete all as specified and as directed. (Make - Jaquar/Marc/ Kohler)

S&F in repair Toilet paper holder of stainless steel fixed to walls with chromium plated (CP) brass screws complete all as spd & directed

S&F grating doom 100mm dia of PTMT complete.

S&F in repair viterous china white soap dish fixed to plugs with chromium plated brass screws in position complete all as specified complete.

S&F in repair sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm

S & F anodised aluminium frame for doors, windows, ventilators with Powder Coating (minimum thickness of powder coating 50 micron) with one or more rebates including joining cleat for fixing etc. complete all as specified

S&F powder coated aluminium window and ventilator shutters, side hung type with out sash bars, aluminium sections weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such hinges type B-21 100 mm long (3no.) ,aluminium tower bolt 100 mm long (2No.),suitable handle (2 No.) complete all as specified.

S&F powder coated three track aluminium (glazed/ gauged) window shutters sliding type incl 4.5 mm thick glass or stainless steel wiremesh, without sash bar aluminium saction weighting 0.55 Kg per mtr including necessary frame work of 2 mm thick aluminium section, joining cleats, glazing clips, rubber packing, anodised aluminium beading , sliding channel,roller screws including fittings complete all as per direction of Engr-in-charge. Note : The work will be also executed at High rise bldgs and necessary T&P, scaffoling is included in Quoted rates.

S&F aluminium anodized grills with 6mm x 5mm aluminium section having square gap of 100mm thk with fixing arrangement complete all as specified and directed

S & F in repair 15 mm bore two way bib cock with wall flange cast copper alloy , fancy type , chromium plated, screwed for iron pipe or for brass ferrule complete all as specified and directed. Make : Jaqaur Cat Part No. ARI-39041 and equivalent in Jaquar, Hindware and Kohilar as approved by GE

S & F 100 /110 mm dia PVC floor trap , with SS grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4)

S&F Fiber Glass Reinforced Plastic (FRP) Door Frames of cross section 90mm x 45mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame.

S&F 30 mm thick Glass Fibre Reinforced Plastic (FRP) paneled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames complete all as specified and directed.

S&F in repair brass chromium plated wall mixture 3 in 1 system with L- bend provision for over head shower and suitable for 15mm bore GI pipe including three joints to steel pipes or unions and plugging and screwing to walls all as specified and directed. Make : Jaquar Continental CON-CHR-273KNUPR and equivalent in make of list as approved by GE

S & F in repair CP shower rose fancy type 200mm x 200mm size with 600 mm long shower arm, fixed in repair to 15mm bore pipe, complete all as specified and as directed. ( Make : Hindware /Jaquar or equivalent approved by GE)

S & F in repair 65 x 95 mm rectangular shape single flow hand shower ( body & face plate stainless with ABS body in chrome finish) with rubit cleaning system including flexible pipe and fixed complete all as specified and as directed. (Make : Jaquar cat part No HSH CHR 1657 and equivalent in make of list as approved by GE.

S&F PVC connection 15mm sizes with PTMT nuts of length 450 mm complete all as specified and directed.

S & F in repair Designer type high quality fancy type looking mirror of size as approved by Engr-in-Charge 8-10mm thick, fixed to wall with stainless steel studs, screws, brackets and washers etc complete all as specified and as directed.

S&F in repair Towel Rack holder of stainless steel fixed to walls with chromium plated (CP) brass screws complete all as spd & directed

S&F in repair corner glass shelf 225x225mm radius consisting of 5.5mm thk sheet glass with CP brass brackets with 02 Nos of CP railing in each set complete all as spd. (Make - Jaquar/Marc/ Kohler)

S & F repair 75 mm PVC (SWR) bends with acess door completed all as specified and directed

S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in- charge. etc complete all as directed.

M & L with fabrication & fixing to back side of kitchen partition shelves/drawers for Modular kitchen cabinate/ wardrobe/ cupboard/drawers made out of 12 mm thick HDHMR boards with white laminated color on both side including paste to all exposed edge by edge Banding Tape including provision of cabinet for keeping baskets/ drawers etc and including taking down old any type cupboards , shelves etc all as specified and directed. (Design and pattern as approved by GE). (Make :Action tesa or equivalent)

M&L for APP based polymeric membrane with mineral granules on top surface, minimum weighting 3 kg/Sqm and minimum 3 mm thick reinforced with polyester non woven fabric (wt not less than 150 gms/sqm) over one coat of 85/25 bitumen @1.2 kg/sqm with bitumen primer and paste the membrane with torching method and again apply a coat of 85/25 bitumen @ 1.6 kg/sqm at overlapping joints with a over lap of 75mm at the sides and 100 at the ends complete all as specified. Note: the water proofing treatment shall be carried out by the manufacturer or their authorised applicators.” 1. The Work Shall be executed through authorized applicator of manufacturer 2. Authorized applicator shall be approved by GE before starting of work 3. All material shall be procured directly. Guarantee: The contractor shall furnish a written guarantee for the effectiveness of the water proofing treatment for a period of Eight years in favour of the GE. A sum equivalent to 2.5% (Two point Five Percent) of the cost of water proofing treatment shall be retained by the Govt from the contractor’s dues as security deposit. The contractor may, however, furnish a fixed deposit receipt in lieu from a Schedule bank pledged in favour of Garrison Engineer. (e) Full quantity of APP membrane & bitumen shall be entered in MB as "NOT TO BE ABSTRACTED".

M&L for Bitumastic gola, with 80/25 bitumen and coarse sand mixture. 1:3 by weight, 8cmx8cm at the junction of roofing to vertical surfaces

Taking down/ out carefully copper/aluminium point wiring for light/fan/bell/ sockets 5/15 Amps complete without accessories as switches, Sockets, holders, ceiling roses, light fitting regulators etc and making good the disturbed surface of wall ceiling to match with existing surface complete all as directed.

Material and labour of point wiring complete with 1.5 Sq mm (nominal area) FRLS PVC insulated sheathed and multistranded copper conductor cable ISI marked and including PVC concealed conduit ISI marked of size 20 mm dia medium grade and fittings such as tees, bends, elbow, and FRLS PVC insulated unsheathed 1.5 Sqmm copper conductor mulistranded earth wire, connecting to common earth dolly including MS Box with Plastic laminated sheet including cutting chases and making good disturbed surface in CM 1:3 to match with existing surface for one light / fan point controlled by one way switch complete all as directed.

All as per srl item No 153 here-in-before but with but for one socket outet point 5 amps on the same board.

All as per srl item No 153 here-in-before but for one socket outet point 5 amps on the independent board.

All as per srl item No 153 here-in-before but with 2.5sqmm cable on independent board complete all as directed.

S & F switch piano, flush type, single pole one way 5/6Amp complete all as directed.

S & F Bell push piano type-1 complete all as directed.

S & F socket, 2 in 1, 5/6A flush type. complete all as directed.

S & F socket 3 pin 5/16A, 5 in 1 flush type.complete all as directed.

S & F switch piano, flush type, single pole one way 15/16Amp. complete all as directed.

S & F in repair Modular Fan regulator step type ,120 watts, complete all as directed.

Supply and fixing Ceiling rose, insulated body, 3 terminal, 240 volts, 5 Amps complete all as directed.

Supply and fixing Dingdong bell 6 Amp, 240 Volt complete all as directed.

S&F in repair LED energy efficient integrated battens fittings, PVC extruded heat sink with shatter proof opal shell of polycarbonate compound, 20 Watt cool/warm white complete all as specified and as directed.

S&F in repair LED energy efficient integrated battens fittings, PVC extruded heat sink with shatter proof opal shell of polycarbonate compound 10 Watt , cool/warm white complete all as specified and as directed.

S&F of energy efficicent LED fittings 45W LED 6K suitable for builing security light pressure die cast aluminium roadway luminaire with high power LEDs and HF electronic driver complete all as specified and as directed.

S & F of street light bracket incl clamp, nut and anchor bolt etc make to shape for street light fitting made out of GI pipe light grade 25 mm bore 1.0 mtr long on bend to shape the top of wall of existing building complete all as specified and directed.

S&F in replacement of Ventilating fan 250 mm sweep plastic body type including self cousing louver and making all electric connections, complete all as specified and as directed.

Supply and fixing exhaust fan upto 300 mm sweep metalic body type and making all electric connections complete all as directed and depositing the old U/s item to MES store yard.

S & F in replacement of Distribution Board double door made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection surface mounting SPN 8 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCB’s and isolators etc complete all as specified and directed.

All same as per srl item No 171 but 4 way complete.

S&F in replacement MCB 'C' Curve type suitable for 240 volts AC supply, SP with over load and short circuit protection and rupturing capacity not less than 10 KA of capacity 6 to 32 Amps complete all as specified and directed.

S&F in replacement Isolator suitable for 240 volts AC supply, SPN of capacity 32/40 Amps complete all as specified and directed.

M&L taking down ceiling fans complete with blades and deposited to MES store yard

Supply and fixing ceiling fans complete with blades, down rods, and accessories, 230 V, 1200mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC).

S & F in replacement of aluminium cable 1100 Volt grade, served with inner sheathing of PVC tape and overall PVC sheathed twin core Alimunium cable circular of size 10 Sqmm ISI marked in service connections, including taking down old unserviceble cable complete all as directed.

Material and labour of point wiring complete with 1.5 Sq mm (nominal area) FRLS PVC insulated sheathed and multistranded copper conductor cable ISI marked and including PVC concealed conduit ISI marked of size 20 mm dia medium grade and fittings such as tees, bends, elbow, and FRLS PVC insulated unsheathed 1.5 Sqmm copper conductor mulistranded earth wire, connecting to common earth dolly including Metal Flush Box, Cover plate with frame, cutting chases and making good disturbed surface in CM 1:3 to match with existing surface for one light point exhaust fan point controlled by one 1-way switch complete all as directed.

All as per item No 178 here-in-before but one socket outlet point 5 amps on the same board.

All as per item No 178 here-in-before but one socket outet point 5 amps on the independent board.

All as per item No 178 here-in-before but wiring with 2.5 Sqmm size.

S&F modular socket outlet 6 & 16 amps 6 pin multipurpose combined 2 module all as directed.

S&F modular switch flush type, 16 amps one way,SP,230 volts AC all as directed.

S&F bell push 6 amps one way

S&F modular switch flush type, 6 amps one way,SP,230 volts AC all as directed.

S&F modular socket outlet 6 amps 5 pin 2 module all as directed.

S&F in replacement sub main wiring with 2 runs of 4 Sqmm FRLS, single core, PVC insulated & unsheathed cable, 1100 Volts grade, with multi stranded, copper conductor and one run of 6 Sqmm FRLS, PVC insulated copper conductor of same description through existing conduit. Note:- (Two run of cable along with one run of earth conductor shall be measured as one RM unit).

S&F in replacement sub main wiring with 2 runs of 4 Sqmm FRLS single core PVC insulated & unsheathed cabl, 1100 Volts grade with multi stranded copper conductor drawn through and including 20 mm dia PVC rigid non metallic conduit medium grade as per IS with all fittings and one run of 4 Sqmm FRLS PVC insulated copper conductor and making good in CM 1:3 to match with existing surfaces complete all as specified and as directed. Note:- (Two run of cable along with earth conductor including PVC rigid conduit shall be measured as one RM length).

S&F in replacement sub main wiring with 2 runs of 6 Sqmm FRLS single core PVC insulated & unsheathed cabl, 1100 Volts grade with multi stranded copper conductor drawn through and including 20 mm dia PVC rigid non metallic conduit medium grade as per IS with all fittings and one run of 6 Sqmm FRLS PVC insulated copper conductor and making good in CM 1:3 to match with existing surfaces complete all as specified and as directed. Note:- (Two run of cable along with earth conductor including PVC rigid conduit shall be measured as one RM length).

Taking down of geyser any type, size depositing to MES store yard complete all as specified and as directed.

S&F Geyser 25 litre capacity vertical type with steel tank and glass inner linen , 5 star rating complete including fastners (4No.) for hanging all accessories such as safety valve, thermostat, NRV, inlet & outlet 304 grade stainless steel connection pipe with SS nut complete all as specifed and as directed.

S&F Modular fan regulator step type, 120 watts complete all as specified and directed.

S&F in repair Modular white cover plate with frame 1 module all as specified

S&F in repair Modular white cover plate with frame 2 module all as specified

S&F in repair Modular white cover plate with frame 3 module all as specified

S&F in repair Modular white cover plate with frame 4 module all as specified

S&F in repair Modular white cover plate with frame 6 module all as specified

S&F in repair Modular white cover plate with frame 12 module all as specified

S&F in repair Modular Metal Flush Box 1/2 Module duly embadded in wall in cement mortar 1:4 after chase cutting/ cutting of wall tile or marble with cutter and matching/ making good the existing surface complete

S&F in repair Modular Metal Flush Box 3 Module duly embadded in wall in cement mortar 1:4 after chase cutting/ cutting of wall tile or marble with cutter and matching/ making good the existing surface complete

S&F in repair Modular Metal Flush Box 4 Module duly embadded in wall in cement mortar 1:4 after chase cutting/ cutting of wall tile or marble with cutter and matching/ making good the existing surface complete

S&F in repair Modular Metal Flush Box 6 Module duly embadded in wall in cement mortar 1:4 after chase cutting/ cutting of wall tile or marble with cutter and matching/ making good the existing surface complete

S&F in repair Modular Metal Flush Box 12 Module duly embadded in wall in cement mortar 1:4 after chase cutting/ cutting of wall tile or marble with cutter and matching/ making good the existing surface complete

S&F PVC batten holder including 9 w LED bulb complete

Supply and fixing of Modular AC Socket with 25 Amps SP mini MCB, 230 Volts, 50Hz. In 4 module sheet metal enclosure complete all as specified and as directed.

S&F LED ceiling light fitting 10 watt in round shape, surface/ recessed type and making all electric connections complete.

All same as per srl item No 171 but 16 way complete

S&F in replacement Isolator SPN 63 Amp including connections complete

S&F desert cooler electric driven (single phase) having nominal air flow capacity of 1800 CuM per hour, (or nearest size) (*steel body) Model No ECHO 300S (with stand) (Ram cooler), metal ultra cool 300 N (Ram cooler), GOLD 370 (Ram Electricals) or equivalent as approved by GE)

Supply and Installation hi wall split inverter AC units 1.5TR doo/ outdoor complete with cordless remote control unit and with in built air ionisor and Plasma fitter for better indoor air quality with minimum 5 star rating and EER 3.2 of capacity. (Make: HITACHI/CARRIER/DAIKIN/BLUE STAR)

Supply and Installation of voltage stabilizer 4 KVA capacity, range 170V to 270V, 50 Hz, including depositing old unsv stabilizer to MES store yard complete. (Make: Bluebird/ V guard/ Volini)

M/s Shubh Enterprises (BID ID -3358536)

Gaurav Construction Company (BID ID -3365350)