Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹4.3 CrAccepted-AOC | ₹4.3 Cr | L1 | Accepted-AOC AWARDED |
| 2 | L2₹4.5 CrRejected-Finance 171 B 4 MADHUR VIHAR DELHI | EAST DELHI | DELHI | 110092 | ₹4.5 Cr | L2 | Rejected-Finance REJECT |
| Sl No | Description | Qty | Unit | MANOJ KUMAR L2 | SUDHIR KUMAR JAISWAL L1 |
|---|---|---|---|---|---|
| 1.00 | Excavation in soil by manual means (Excavation for roadway in soil using manuyal means including loading in truck for carrying of cut earth to embankment site with all lifts and leads upto 1000meters.) | 300 | Cum | 288.17 ₹86,451 | 285.87 ₹85,761 |
| 2.00 | Wet Mix Macadam (Providing, laying,spreading and compacting graded stone aggregates to WMM specification including premixing the materials with water at OMC in mechanical mix plant carriage of mixed material by tipper to site , laying in uniform layers with paver in sub-base/basecourse on well prepared surface and compacting with vibratory roller to achieve desired density. with vibratory rollar | 150 | Cum | 1,731.24 ₹2.6 L | 1,717.39 ₹2.6 L |
| 3.00 | Granular sub base with coarse graded material.Construction of Granular sub base by providing coarse graded material,spreading in uniform layers with moto grader on prepared surface,mixing by mix in place method with rotavator at OMC nad comapacting with vibratory rollerf to achieve desirede density,complete as per Clause 401.
Internal road | 200 | Cum | 1,581.22 ₹3.2 L | 1,568.57 ₹3.1 L |
| 4.00 | Cement Concrete Pavement ( Construction of un-reinforced , dowel jointed , Plain cement concrete pavement over a prepared sub base with 43 grade cement @ 400 kg per cum , coarse and fine aggregate confirming to IS: 383, maximum size of coarse aggregate not exceeding 25mm mixed in a bacthing and mixing plant as per approved mix desing , transported to site laid with a fixed or lip form paver spread compacted and finished in a continous operation including provision of contraction , expansion construction and logitutednal joints , joint filter , seperation membrane sealant primer joint sealant debonding strip dowel bar tie rod admixture as approved curing compound finishing to lines and grades as per drawing | 112.5 | Cum | 5,895.9 ₹6.6 L | 5,848.73 ₹6.6 L |
| 5.00 | Earth work in excavation in foundation trenches in ordinary soil (vide classification of soil Item-A) and disposal of excavated earth as obtained to a distance up to 50M. Including all lifts with leveling ramming the foundation trenches removing roots of trees shrubs all complete as per approved design and per building specification and direction of E\I. | 2,299.56 | Cum | 166.99 ₹3.8 L | 165.65 ₹3.8 L |
| 6.00 | Filling in foundation trenches and plinth in layers not exceeding 150 mm thick well watered, rammed fully compacted and fine dressed with earth obtained from excavation of foundation trenches within a lead of 50 m and lift of 1.5 m all complete as per building specification and direction of E/I (Mode of measurement compacted volume). | 12.45 | Cum | 60.8 ₹756.96 | 60.32 ₹750.98 |
| 7.00 | Providing coarse clean sand in filling in foundation trenches including ramming & watering in layers not exceeding 150mm thick with all leads & lifts including cost of all materials, labour, royalty & taxes all complete as per building specs.and direction of E/I. | 188.35 | Cum | 648.4 ₹1.2 L | 643.21 ₹1.2 L |
| 8.00 | Providing designation 75B brick work in C.M. (1:6) in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth, curing, taxes and royalty all complete as per building specification and direction of E/I. | 84.03 | Cum | 5,620.77 ₹4.7 L | 5,575.8 ₹4.7 L |
| 9.00 | Providing designation 75B Brick work in C.M (1:6) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth, curing, taxes and royalty all complete as per building specification and direction of E/I. | 54.52 | Cum | 5,767.96 ₹3.1 L | 5,721.82 ₹3.1 L |
| 10.00 | Providing random rubble stone masonry in C.M. (1:6) in foundation and plinth with hammer dressed stone of less than 0.03 M3 in volume and clean coarse sand of F.M. 2 to 2.5 including cost of screening, raking out joints to 20mm depth, curing, taxes and royalty all complete as per building specification and direction of E/l. | 5.02 | Cum | 2,772.63 ₹13,918.60 | 2,750.44 ₹13,807.21 |
Tender Value
₹4.1 Cr
EMD Value
₹4.1 L
Closing Date
6 Oct 2025, 2:00 pmClosed
OFFICE OF THE E.O. NAGAR PANCHAYAT, LATEHAR
OFFICE OF THE E.O. NAGAR PANCHAYAT, LATEHAR
Construction and Commissioning of Fecal Sludge Treatment Plant of Capacity 10 KLD at Latehar town Jharkhand followed by Operation and Maintenance including desludging operations for 5 years
2025_UDD_105044_1
UDD/LNP/04/2025-26 (2nd Call)
Open Tender
Civil Works
365 days
LATEHAR
Please refer Tender documents.
3 documents required · 3 mandatory
₹10,000
₹4.1 L
25 Mar 2026
22 Sept 2025
7 Oct 2025
23 Sept 2025
6 Oct 2025
23 Sept 2025
23 Sept 2025 - 3 Oct 2025
Amount
Excavation in soil by manual means (Excavation for roadway in soil using manuyal means including loading in truck for carrying of cut earth to embankment site with all lifts and leads upto 1000meters.)
Wet Mix Macadam (Providing, laying,spreading and compacting graded stone aggregates to WMM specification including premixing the materials with water at OMC in mechanical mix plant carriage of mixed material by tipper to site , laying in uniform layers with paver in sub-base/basecourse on well prepared surface and compacting with vibratory roller to achieve desired density. with vibratory rollar
Granular sub base with coarse graded material.Construction of Granular sub base by providing coarse graded material,spreading in uniform layers with moto grader on prepared surface,mixing by mix in place method with rotavator at OMC nad comapacting with vibratory rollerf to achieve desirede density,complete as per Clause 401. Internal road
Cement Concrete Pavement ( Construction of un-reinforced , dowel jointed , Plain cement concrete pavement over a prepared sub base with 43 grade cement @ 400 kg per cum , coarse and fine aggregate confirming to IS: 383, maximum size of coarse aggregate not exceeding 25mm mixed in a bacthing and mixing plant as per approved mix desing , transported to site laid with a fixed or lip form paver spread compacted and finished in a continous operation including provision of contraction , expansion construction and logitutednal joints , joint filter , seperation membrane sealant primer joint sealant debonding strip dowel bar tie rod admixture as approved curing compound finishing to lines and grades as per drawing
Earth work in excavation in foundation trenches in ordinary soil (vide classification of soil Item-A) and disposal of excavated earth as obtained to a distance up to 50M. Including all lifts with leveling ramming the foundation trenches removing roots of trees shrubs all complete as per approved design and per building specification and direction of E\I.
Filling in foundation trenches and plinth in layers not exceeding 150 mm thick well watered, rammed fully compacted and fine dressed with earth obtained from excavation of foundation trenches within a lead of 50 m and lift of 1.5 m all complete as per building specification and direction of E/I (Mode of measurement compacted volume).
Providing coarse clean sand in filling in foundation trenches including ramming & watering in layers not exceeding 150mm thick with all leads & lifts including cost of all materials, labour, royalty & taxes all complete as per building specs.and direction of E/I.
Providing designation 75B brick work in C.M. (1:6) in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth, curing, taxes and royalty all complete as per building specification and direction of E/I.
Providing designation 75B Brick work in C.M (1:6) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth, curing, taxes and royalty all complete as per building specification and direction of E/I.
Providing random rubble stone masonry in C.M. (1:6) in foundation and plinth with hammer dressed stone of less than 0.03 M3 in volume and clean coarse sand of F.M. 2 to 2.5 including cost of screening, raking out joints to 20mm depth, curing, taxes and royalty all complete as per building specification and direction of E/l.
Providing and laying in position cement concrete of specified grade excluding the cost of cenetering and shuttering - all work upto plinth level. 1:2:4 (1 Cement :2 Coarse Sand (zone - III) : 4 graded stone aggregate 20mm nominal size).
1:3:6 (1 Cement :3 Coarse Sand (zone - III) : 6 graded stone aggregate 20mm nominal size)
1:4:8 (1 Cement :4 Coarse Sand (zone - III) : 8 graded stone aggregate 40mm nominal size)
Providing & Laying cement concrete in kerbs, steps and the like at or near ground level excluding the cost of centering, shuttering and finishing 1:1.5:3 (1 cement: 1.5 coarse sand (zone - III):3 graded stone aggregates 20mm nomibnal size)
Providing and fixing at or near ground level precast cement concrete in kerbs, edgings etc. as per approved pattern and setting in position with cement mortar 1:3 (1 cement : 3 coarse sand), including the cost of required centering, shuttering complete. 1:1.5:3 (1 Cement : 1.5 Coarse Sand(zone-III) : 3 graded stone aggregate 20 mm nominal size)
Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand(zoneIII) : 4 graded stone aggregate 20mm nominal size).
1:1.5:3 (1 Cement : 1.5 Coarse Sand (zone - III) : 3 graded stone aggregate 20 mm nominal size)
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string course, fillets, columns, pillars, piers abutment, post and struts etc. above plinth level up to floor five level excluding cost of centring , shuttering finishing and reinforcement: 1:1.5:3 (1 Cement : 1.5 Coarse Sand (zone - III) : 3 graded stone aggregate 20 mm nominal size)
Reinforced cement concrete work in beams, suspended floors , roofs having slope uot 15 degree landings, balconies, shelves, chajja, lintels, bands, plain window sills, staircase & spiral stair cases above plinth level upto floor five level excluding the cost of centering , shuttering finishing and reinforcement, with 1:1.5:3 (1 Cement : 1.5 Coarse Sand (zone - III) : 3 graded stone aggregate 20 mm nominal size) In Slab
Centering and Shuttering including strutting, propping etc. and removal of form for Foundation, footing, bases of columns, etc for mass concrete
Supplying fitting and fixing 35mm thick solid core type non-decorative single leaf flush shutters in doors and windows with black board core blended with high quality phenol formaldehyde synthetic resin both side commercial veneered of standard make with oxidised iron fittings hinges, tower bolts, handle, cleats and sand blocks and taxes all complete as per building specification and direction of E/I.
Supplying fitting and fixing oxidised iron fittings of approved quality and make to doors and windows all complete as per building specification and direction of E/I 100 mm butt hinge
Supplying, fitting and fixing M.S. grill made of 20x6mm M.S. flat as per approved design and drawing, properly fabricated with joints continuous fillet welded and finished smooth , carriage of grill to work site, hoisting as per building specification and direction of E/l. (where materials is not supplied by the deptt.)
Providing and fixing fan hook of 16mm dia M.S. bar 1 metre long bent to required size and shape placed in position and fixed in R.C.C. slab/ beam at the time of casting all complete as per building specification and direction of E/I. (where material is not supplied by deppt.)
Supplying ,fixing and fixing collapsible gate of appoved sixe and make properly fabricated with vertical double channels 20x10x2 mm at 100 mm centres and braced with M.S flat diagonlas 20x3 mm with top and bottom rails of T iron 40x40x6 mm with 38 mm dia steel pulleys complete with bolts nut locking arrangement stoppers handles , including applying a priming coat of red lead paint carriage , hosting and taxes all complete as per building specification and direction E/I.
Supplying, fitting and fixing fully glaxed steel door, windows or ventilations of standard rolled 'Z' and mullion steel sections and size as per IS-1038 joints met and welded with 100x16x3mm M.S. lugs fixed in cement concrete (1:2:4) blocks 15x10x10cm, size including cost of oxidised iron fittings, with hinges, handle per steps, catch springs, 3mm thick palin glass panes with Aluminimum beads and inner frame fixed with lugs with 20mm long 6.3mm G.I. counter sunk machine screw and nuts and applying a coat of red lead paint carriage to work site hoisting and placing in position in all storys and taxes all complete as per building specification and direction of E/I.
Providing Tor steel reinforcement of 8mm. Dia rods as per approved design & drawing with cutting, bending and binding with annealed wire with cost of wire removal of rust, placing the rods in position {TMT Fe 500 (only valid for Tata(Tiscon), Sail, JSPL, Electrosteels Ltd. Bokaro and vizag (RINL)} (excluding carriage of bars to work site) all complete as per building specification and direction of E/I. 8 mm
Labour for fabricating, erecting, hoisting and fixing in position structural steel work in R.S. joists, channels, angles, Tees, flats, plates, lattice members, built up compound sections in columns, girders, staircase, or trusses including cost of gusset plates, holding down bolts, anchor plates at all heights and depths, bolting, welding (machining wherever necessary) with applying a priming coat of red lead paint all complete as per building specification and direction of E/I.
S/F/F MS grill gate with MS grill made of 20X6 MS flats or 16 mm square bars fitted on ---- do ---E/I ( When steel is not supplied by the deptt.) Entry gate 4M wide and 1.5M height and wicket gate 1 M wide and 1.5 M height.
Structural Steel work in single section, fixed with or without connecting plate, including cutting hoisting fixing in position and applying a priming coat of approved steel primer all complete.
Providing designation 75B one brick flat soiling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/I.
Providing designation 75B one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/I.
Providing 50 mm thick cement concrete flooring 1:2:4 with 20 mm to 6 mm size graded stone chips finished with flooring coat of neat cement in panels including cost of curing , taxes, royalty all complete as per building specification and direction of E/I.
Extra for Providing and fixing 30x4mm glass strips in joints of flooring, complete job as per specifications and direction of E/I.
Providing and laying hydraulically machiine pressed terrazo tilles 20mm thick of approved texture with down marble chips of approved shade, size and quality, laid on 19mm, thick bed of lime mortar (1:1:1) (lime: surkhi: sand) with neat cement slurry mixed with pigment to match the shade of tiles between joints, including rubbing and polishing to granolithic finish with approved quality of carborandum stone including cost of curing, roualty and taxes all complete as per building specification and direction of E/I. (c) any light colour with 100% white cement
Providing and laying hydraulically machiine pressed terrazo tilles 20mm thick in skirting of approved texture with 4 mm down marble chips of approved shade, size and quality, over 12mm thick cement palster (1:3) base with neat cement slurry mixed with pigment to match the shade of tiles between joints, including rubbing and polishing to granolithic finish with approved quality of carborandum stone including cost of curing, roualty and taxes all complete as per building specification and direction of E/I. (c) any light colour with 100% white cement
Providing and laying 25mm thick kota stone in risers of steps, skirting and pillars of approves size, texture and colour laid over 12mm thick cement mortar (1:3) and joined with grey cement slurry mixed with pigment to match the slab including rubbing to granolithic finish with approved quality of carborandum stone including cost of curing, royalty and taxes all complete as per building specification and direction of E/I.
Providing and laying 6mm precast white glazed tiles in walls over 12mm, cement mortar (1:3) and jointed with gray cement slurry, flush pointed with white cement including rubbing, polishing and cost of curing, taxed and royalty all complete as per building specification and direction of E/I.
Providng 12mm thick cement plaster (1:4) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.
Providng 12mm thick cement plaster (1:3) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.
Providng 12mm thick cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.
Providing 6mm thick cement plaster (1:4) in ceiling with celean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.
Providng 12mm thick cement plaster (1:3) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.
Providing 1.5mm cement punning including curing, carriage of water with all leads and lifts as per building specification and direction of E/I
Providing 12mm thick water proof cement plaster(1:3) with clean coarse sand of F.M 1.5 with 5% cico or any other approved water proofing compound including-do-
Providng 19mm thick water proof cement plaster (1:3) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.
Providing two coats of dry distemper of approved shade and make over a primer coat of washing over new surface including preparing the plastered surface by rubbing smooth with pumice stone or fine sand paper applying putty wherever required, scaffolding washing floors and taxes all complete as per building specification and direction of E/I.
Providing two coat of snowcem of approved shade and make over a coat of cement of primer on new surface mcluding preparing the plastered surface smooth with sand paper, soaping, curing and taxes all complete as per building specification and direction of E/I.
White washing three coats over new surface in ceiling.
Providing two coats of synthetic enamel paint of approved shade and made over steel surface including cleaning the surface thoroughly, scaffolding and taxes all complete as per building specification and direction of E/I.
Labou for fitting and fixinf GCI sheet roofing in proper slope including the cost of 'J' OR 'L' hooks,lipmpet and bitumen washers,carriage of sheets to work site and taxes all complete as per building specification and direction of E/I
Water proofingfor Old and New Roof Slab:-Providing and laying water proofing treatment on roof slab by applying two Component ,factory designed ,ready to use,acrylic modified flexible material applied with brush,roller or spray for water proofing coating as per manufacturer specification with following steps-do-
Supplying, fitting and fixing vitreous white glazed earthen ware I.W.C of parry Hindustan or any other ISS approved make with 100mm H.C.I 'P' trap 15 litres C.I pull and let go flushing cistern of names or other I.S.S equivalent make, complete with all fittings, C.I. or CC brackets 32mm alkathene/PVC telesopic flush, pipe about 2M long with one brasscoupling and clamps G.I. chain and pull including supplying and fixing a pair of vitreous white glazed earthenware ware footrest to be fixed in floor 15mm C.I. body brass spindle stope cock of weight not less than 50gm, 15mm PVC connection pipe 450mm long and the exposed pipe and cistern with two coats of approved paint over a coat of red oxide primer etc. all complete as per specification and direction of E/I. 510 mm long with 12.5 lit low level PVC cistern ( C )With 10 lit. low level PVC cistern
Supplying, fitting and fixing flat back or angular, lipped front vitreous white glazed earthen ware urinal of 'Hindustan "Parry" or any other approved ISS make with 5 liters capacity C.I automatic fulsiing cistern of reliance for any other ISS approved make with all fittings with CI or RS brackets, standare size GI flush pipe with fitting clamps, 15mm C.I. brass spindle stop cock of approved quality weight not less than 400gm, 15mm PVC / Alkthene pipe 450mm longwith brass coupling at both ends and doing plumber joints including painting of exposed part with two coats of approved paintover a priming coat of red oxide, cutting wall and floor, making good the same etc. all complete as per specification and direction of E/I.
Supplying fitting and fixing vitreous white glazed earthen ware indian squating type 600 x 300 mm urinal plate of parry , hindustan or any other I.S.S approved make with internal flusing rim ,100 mm white glazed earthen ware channel about 1 m long 5 litre capacity C.I automatic flusing cistern of rliance or any other approved make with fittings R.S or C.I brackets 15 mm and 45 cm long PVC/Alkathene pipe standard G.I flush pipe for backand front with spreader fittings and brass coupling etc. 15 mm C.I body brass complete including painting of exposed parts with 2 coats of approved paint over coat of red oxide primer and cutting the wall and floor and making goood the same as per specification and direction of E/I.
Supplying, fitting and fixing vitreous white glazed earthen ware wah hand basin of parry or Hindustan or any other ISS approved make supported on painted C.I. or R.S. brackets 32mm C.I. brass waste, 15mm dia C.I. body brass spindle stop cock of approved quality of weight not less than 350 gm, 32mm PVC waste pipe 750mm long wtih brass coupling at one end and making plumber joints etc. all complete as per specification and as per direction of E/I.
Providing and fixing 600 x 450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
Providing and fixing brass Stop cock of approved quality
Providing and fixing male ended 15 mm dia brass bib cock of approved quality (Wt. not less than 350 gms.) with extra socket all complete as per specification and direction of E/I.
Providing and supplying in standard lenghts high density polythylene pipe (HDPE pipe) 25mm to 500mm dia confirming to IS 4984-4984/14151/12786/13488 (Latest Revision with necessary jointing materials like mechanical connector i.e thread/insert joint /quick release coupler ---do---- 140 mm (HDPE pipe of materials grade PE100-PN 10)
110 mm(HDPE pipe of materials grade PE100-PN 10)
110 mm(PE100-PN06 dia )
Foot Mounted Motors TEFC 1500 RPM- Supplying Foot Mounted TEFC 1500 RPM squirral cage induction motor,conforming to IS 325 having continuous rating suitable for operation at 415 volts +/-10% ,3 phase,50Hz +/-3% with "F" class insulation temperature rise limited to class "B" insulation motors conform to IS 12615 with efficiency level IE3 and provided with enclosed protection class IP-55
HYDT:Cost of Drilling 200mm X 165MM x 125mm mtr deep nore well in all kind soil and rocks in rural area for installation of pump set with hydraulic DTH Rig machine all complete including all materials ,tolls ,drilling rig,air compressed and equipments as well, as fuel,lubrication and cost of transportation og rig machine and other vehicle upto site. From 0.00 M to 50.00 M below G.L
From 51.0 M to 125.00M
Supplying submesible pump sets confirming to 8034 and motar conforming to IS 9283.Pump shall be suitable for various delivery head and discahrge with stainless steel pump shaft and polypropylene /noryl impeller.Motor suitable for working on 415+10,3HP,50Hz,AC supply with cable guard ,thrust carbon filter bearing to withstand ebtire hydraulic thrust ,water proof bindinf shall be provided .The pump set shall be suitable for direct coupling.Pump shall have suitable outlet as per manufacture design.Anti thrust stream lined non return valve shall be provided with pump,3meter submersible copper conductor cable in single/double run shall be provided with each pump. Submersible pump set 100 mm dia upto 20stages 2HP
Supply of 3 core 2.5 sqmm FR pvc insulated Copper Wire CORE 2.5sq mm
Polyethene water storage Tank of mark(e.g.,Sintex/sinter/himgiri/gangotri etc) with cover and locking system
Supply of G.I. Pipes (Tata mark) or equivalent for cable. 50mm dia
E/W in exavation of cut off trenches by the hydraulic excavator as per designied section in soft rock (where blasting is not needed) (vide classifictaion type of soil item-C ) with disposal of spoil beyond 1/2 km from centre of trench but upto 1 km with all lifts by tipper including construction and maintenance of haul road all complete as per specification and direction of E/I
Supplying and laying gravel filter (sixe 5mm to 15 mm) in filter blanket and in toe drain (in horizontal portion of Dam) as per design and drawing with watering, compaction including cost of material, royalty all taxes etc but excluding the cost of carriage all complete as per specification and direction of E/I
Supplying and laying good quality stone metal filter (20mm to 63mm size) in rock toe, heel trench, toe drain as per design and drawing including cost of material, royalty, all taxes etc but excluding cost of carriage all complete as per specification and direction of E/I.
Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe. (but with charcoal/ coke and salt) as required.
Earthing with copper earth plate 600mm X 600mm X 3mm thick including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. (with charcoal or coke and salt)
Supply and laying of following sizes Al. conductor PVC insulated armoured seathed cable of 1100 V grade at a depth of 750 mm B. G. L 3.5 core (95 Sqm)
3.5 core(50 sqm)
3.5 core(35 sqm)
2 core 10 sqm
Supply and laying of 3.5 x 120 mm2 Al. armoured cable.
1:1.5:3 (1 Cement: 1.5 coarse sand (zone-III) ncluding manufactured sand derived from Recycled Concrete Aggregate Recycled Concrete Aggregate (RCA) upto 25% : 3 graded stone aggregate 20 mm nominal size (Recycled Concrete Aggregate (RCA) upto 25%)
Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cemnt: 3 coarse sand: 6 graded stone aggregate 20 mm nominal size) over 75 mm bed of dry brick ballast 40 mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth.
Steel reinforcement for RCC work including straightening,cutting,bending,placing in position and binding complete Hard drawn steel wire
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.
Providing and Fixing 1mm thick M.S.Sheet Door with frame of 40x40x6 M.S.Angle Iron and 3mm Gusset Plates at the junctions and corners, all necessary fitting complete, including applying a primer coat of approved primer with 30x6 Diagonal braces and central cross pieces. Using M.S. angels 40x40x6 mm for diagonal braces
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
Providing and laying rectified Glazed Ceramic floor tiles 300 x 300 mm or more (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours White, lvory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand) including grouting the joints with white cement and matching pigment etc., complete.
Providing ridges or hips of width 60cm over all width plain G.S. sheet fixed with polymer coated J. or L hooks, bolts and nuts 8 mm dia. G.I. limpet and bitumen washers complete (0.80mm thick with zinc coating not less than 275gm/m2)
Providing and fixing 15 cm wide 45 cm over all semicircular plain G.S sheet gutter with iron brackets 40 x 3 mm size, bolts, nuts and washers etc. including making necessary connections with rain water pipes complete. 0.8 mm thick with zinc coating not less than 275 gm/Sqm.
Providing and fixing on wall face unplasticised - Rigid PVC rain water pipes conforming to IS : 13592 Type A. 110 mm dia
Providing and fixing on wall face unplasticised - PVC moulded fittings / accessories for unplasticised - Rigid PVC rain water pipes conforming to IS : 13592 Type A. 110 mm shoe.
Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipesby means of 50x50x50mm hard wood plugs, screwed with M.S Screws of required length, including cutting brick work and fixing in cement mortar 1:4 and making good the wall etc. complete
Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter.
Providing & fixing UV stabilised fiberglass reinforced plastic sheet roofing up to any pitch, including fixing with polymer coated 'J' or 'L' hooks, bolts & nuts 8mm dia. G.I plain/bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% ultra-violet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS 10192 and IS 12866.The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified.
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required
Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : Ridges plain (500 - 600mm)
Gutter (600 mm over all girth)
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I Brackets and stainless steel plug 40mm including painting of fillings and brackets, cutting and making good the walls wherever required
Providing and fixing soil, waste and vent pipes 100 mm dia
Providing & fixing M.S holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including cost of cutting holes and making good the wall etc. For 100 mm dia pipe
Providing and Fixing PTMT Bottle trap 31mm single piece moulded with height of 270 mm, effective length of tail pipe 260mm from the center of the the waste coupling.
Providing & Fixing Waste Coupling For Wash Basin and Sink
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Water point for cleaning of plant and vehicle parking area 25 mm nominal dia Pipes
32 mm nominal dia Pipes
Providing and fixing G.I.pipes complete with G.I.fittings and clamps,including cutting and making good the walls etc. (Internal work): Concealed pipe including painting with anti corrosive bitumastic paint,cutting chases and making good the wall. 15 mm dia nominal bore
Providing and fixing uplasticised PVC connection pipe with brass unions :45 cm length. 15 mm nominal bore
Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately) : 150 mm diameter
Providing and fixing PTMT soap Dish Holder having length of 138 mm, breadth 102mm, height of 75mm with concealed fitting arrangements. Weighing not less than 106 gms.
Providing M.S. foot rests including fixing in manholes with 20 X 20 X 10 cement concrete blocks 1:3:6 (1 Cement : 3 Coarse: 6 graded stone aggregate 20 mm nominal size) as per standard design:With 20 X 20 mm square bar
With 20 mm diameter round bar
Supplying and fixing C.I. cover without frame for manholes :500 mm diameter C.I. cover (medium duty) the weight of the cover to be not less than 58 kg
Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality. Square shape 450 mm internal dimensions.
Circular shape 500mm internal dia.
Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge
Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of:
Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete. 200mm clamp
Uprooting rank vegetation and weeds by digging the area to a depth of 60 cm, removing all weeds and other growth with roots by forking repeatedly,breaking clods, rough dressing, flooding with water, uprooting fresh growths after 10 to 15 days and then fine dressing for planting new grass, including disposal of all rubbish with all leads and lifts
Preparation of beds for hedging and shrubbery by excavating 60 cm deep and trenching the excavated base to a further depth of 30 cm, refilling the excavated earth after breaking clods and mixing with sludge or manure in the ratio of 8:1 (8 parts of stacked volume of earth after reduction by 20% : one part of stacked volume of sludge or manure after reduction by 8%), flooding with water, filling with earth if necessary, watering and finally fine dressing, leveling etc. including stacking and disposal of materials declared unserviceable and surplus earth by spreading and leveling as directed, within a lead of 50 m, lift up to 1.5 m complete (cost of sludge, manure or extra earth to be paid for separately
Supplying and stacking of good earth at site including royalty and carriage upto 5 km lead complete (earth measured in stacks will be reduced by 20% for payment
Plantation of Trees, Shrubs, and Hedge at site i/c watering and removal of unserveiceable material’s as per direction of officer in charge (excluding cast of plant & water) Trees Plant
Shrubs Plant
Hedge Plant /Ground cover
Providing and stacking of plant Canna dwarf of height 25 to 30 cm., 2 to 3 suckers in earthen pots of size 20 cm Earthen Pot/Plastic Pot and as per direction of the officer-in-charge
Providing and stacking of Azadirachta indica ( Neem ) of height 120-130cm in big polybag of size 25 cm as per direction of the officer-in-charge
Add for supply and fixing of M S Overhang of following size over the existing poles. Overhang shall be painted with two coat of red oxide primer and two quote of enamel paint of silver colour as per the direction of Engineer incharge All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR 88.9mm OD x 3.25mm thickness Group 2
Providing and fixing 1.8 metres high GI barbed wire fencing with 2.4 m angle iron posts 50 mm x 50 mm x 6 mm placed every 3 metres center to center founded in M15 grade cement concrete 30cmx30cmx60cm, 0.6 metre below ground level, every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with 12 horizontal lines and 2 diagonals interwoven with horizontal wires, fixed with GI staples, turn buckles etc complete as per clause 807 of MoRT&H specification & type "A" as per IS : 278-1978 size designation 5 (line wire 2.24, point wire 2.00mm mass 97-106 g/m) including all material, labour.
Swaged steel tubular pole (410SP-26) of height 9 Mtr. Confirming to IS:2713 (Part II) in three section with steel base size, bottom of the pole made of 50mm dia MSB Clamp pipe welded to 300mm long MS canopy of suitable dia at an angle of 102.5 suitable size of nuts and bolts including rating of one cost steel primer and two coat of read - oxide all complete as required. (without Arm)
Internal electric Installations (Office building)-12.5% of cost of office building
Non-schedule Items Supply laying and jointing perforeted HDPE pipe. 300 mm dia
Providing & fixing 1.5 mm HDPE geomembrane at land fill site including in situ welding of HDPE membranes, laying, anchoring in trench, seaming, testing as per manufacturers directions as per standard design & drawings.
Supply laying and jointing perforeted HDPE pipe 300 mm Dia
MS Sluice Gate-540 X 500 mm Thickness of gate- 8mmsize of gate frame- 600 X 1500 mm (Approx)Type- Manual Spindle Operated
Solar Based Street Light of Following Specification Semi Integrated Solar Street Light 30 W Battery Type Lithium Ion 11.1V 24ah Solar Panel 12V 60W LED Chip Brand Osram Led Life Time Over 5000 hours Charging Time 5 – 6 hours Lumen 3500 – 3700 Lighting Viewing Angle 120° Backup Time 1 – 2 Days
Office /Visitors chair Stellar R (Stellar COM-205) IS3499 (Q3 CATEGORY) Mateial of fabric back cover:Polyster Frame material:CRCA ERW Round pipe Thickness of Plywood used in backrest :12mm Density of Polyeuthrnae foam used in seat/backrest:40kg/cum
Kent ROFully automatic with auto cut off RO Potable water Purification system Kent RO R (KENT RO ELITE PLUS COMMERCIAL RO 50LPH) IS9001:2015
FRP Strip cast iron bench with integrated seat and backoutddor in lawn area(DP-115) Thickness of cast iron frame body : 36mm GI Pipe diameter for body(Nominal bore) : 25mm -B Class conforming to IS1239 PU coated with layer of thickness of 60 micron. FRP Strip thickness (for seat) : 5mm FRP Strip thickness (for back) : 5mm
Pressure Sand filter & Activated carbon filter(PSF & ACF) with description : 1. Sand Filter FRP Vessel (4" Top opening) 16 x 65 Internal distribution system Top mount multiport valve 25mm Media-200kg(Graded sand(2x4,4x8,8x16)) 2.Carbon Filter FRP Vessel (4" Top opening) 16 x 65 Internal distribution system Top mount multiport valve 25mm Media-75 kg(GAC,COCONUT BAse,IV-80) 3.PUMP WITH STAND Interconnecting UPVC piping-25mm Pressure gauge-2Nos.
Ozonation unit with description: Ozone generator- 30gm/hr (1 no) Oxygen concentrator 5LPM (1No) Venturei Injector1" with NRV 1/4" (1No.) SS Static mixer 1" -5mtrs. Teflon tube 6mm -10mtrs. Polyeurathane Tube 10mm (1No.) Ozone mixing pump CHLF4-60 (1No.) Servo stabiliser 2KVA (1No.) Plumbing and Electrical materials (1No.)
Holland 6500 2WD Turbo super New holland Two wheel drive power operated Tractors(New ) Tractor Engine 45/50HP Bharat stage -IV
KAM AVIDA suction machine of 3500 litres Tank Capacity (KAMVAC-3LT-MANO(without tractor) IS 13496 Overall length : 5010 mm Overall width : 1830mm Vacuum pump flow : 390 cum/hr Suction hose internal : 75 mm
Carriage cost Sand
Chips
Metals
Bricks
Operation and Maintainance(5 YEARS) Operation and Maintainance Cost for 1st Year Manpower for Collection & Transportation Mazdoor semi skilled(With septage suction machine)
Driver /Tractor Operator
Sanitary Supervisor Diploma Holder
POL Tractor 3500 L Capacity
Desludging Machine
Complete O & M and repair of vehicle and suction pump which includes painting,general engine repair,tyre change,wheel alignment,engine oil change,coolentand other minor repairs,oil and greasing,valve change and pipe change etc.
Complete O & M and repair submersible pump
Complete O & M and repair suction pump
Plant Maintenance Cost Cleaning ABR
Watchman/Chaukidar
Mazdoor semi skilled(Plant Maintenance & Horticulture)
Power consumption Power consumptuion of entire plant
Miscellaneous Safety Helmet for Plant Operator
Facemask
Gum Boots
Safety Gloves
Stationary Items
Sample Testing
Capital invetment cost for technology based operations optimization such that includes installation of GPS , GPS tracker in sludging vehicle , software subscription.(2 VEHICLE)
Deduction of Profit of Sale of Organic Manure= 10 KLD*1000*2.5% (t.s)*1.05 (Density)* 15% Moisture
Operation and Maintainance Cost for 2nd Year (Appreciation 5% on every item) Manpower for Collection & Transportation Mazdoor semi skilled(With septage suction machine)
Driver /Tractor Operator
Sanitary Supervisor Diploma Holder
POL Tractor 3500 L Capacity
Desludging Machine
Complete O & M and repair of vehicle and suction pump which includes painting,general engine repair,tyre change,wheel alignment,engine oil change,coolentand other minor repairs,oil and greasing,valve change and pipe change etc.
Complete O & M and repair submersible pump
Complete O & M and repair suction pump
Plant Maintenance Cost Sand Replacement in SDB
Cleaning ABR
Watchman/Chaukidar
Mazdoor semi skilled(Plant Maintenance & Horticulture)
Miscellaneous Provide safety gears for driver,operator and labour such that face mask, safety helmet, safety gloves, gumboots etc. Safety Helmet for Plant Operator Face Mask for all Gum Boots for all Safety Gloves for labour & Operator Safety Helmet for Plant Operator
Facemask
Gum Boots
Safety Gloves
Stationary Items
Sample Testing
Capital invetment cost for technology based operations optimization such that includes installation of GPS , GPS tracker in sludging vehicle , software subscription.
Deduction of Profit of Sale of Organic Manure= 10 KLD*1000*2.5% (t.s)*1.05 (Density)* 15% Moisture
Operation and Maintainance Cost for 3rd Year (Appreciation 10% on every item) Manpower for Collection & Transportation Mazdoor semi skilled(With septage suction machine)
Driver /Tractor Operator
Sanitary Supervisor Diploma Holder
POL Tractor 3500 L Capacity
Desludging Machine
Complete O & M and repair of vehicle and suction pump which includes painting,general engine repair,tyre change,wheel alignment,engine oil change,coolentand other minor repairs,oil and greasing,valve change and pipe change etc.
Complete O & M and repair submersible pump
Complete O & M and repair suction pump
Plant Maintenance Cost Screen replacement in Screen chamber
Cleaning ABR
Watchman/Chaukidar
Mazdoor semi skilled(Plant Maintenance & Horticulture)
Power consumptuion of entire plant
Miscellaneous Provide safety gears for driver,operator and labour such that face mask, safety helmet, safety gloves, gumboots etc. Safety Helmet for Plant Operator- Face Mask for all Gum Boots for all Safety Gloves for labour & Operator Safety Helmet for Plant Operator
Facemask
Gum Boots
Safety Gloves
Stationary Items
Sample Testing
Capital invetment cost for technology based operations optimization such that includes installation of GPS , GPS tracker in sludging vehicle , software subscription.
Deduction of Profit of Sale of Organic Manure= 10 KLD*1000*2.5% (t.s)*1.05 (Density)* 15% Moisture
Operation and Maintainance Cost for 4th Year (Appreciation 15% on every item) Manpower for Collection & Transportation Particulars Mazdoor semi skilled(With septage suction machine)
Driver /Tractor Operator
Sanitary Supervisor Diploma Holder
POL Tractor 3500 L Capacity
Desludging Machine
Complete O & M and repair of vehicle and suction pump which includes painting,general engine repair,tyre change,wheel alignment,engine oil change,coolentand other minor repairs,oil and greasing,valve change and pipe change etc.
Complete O & M and repair submersible pump
Complete O & M and repair suction pump
Plant Maintenance Cost Sand Replacement in SDB
Cleaning ABR
Watchman/Chaukidar
Mazdoor semi skilled(Plant Maintenance & Horticulture)
Power consumptuion of entire plant
Miscellaneous Provide safety gears for driver,operator and labour such that face mask, safety helmet, safety gloves, gumboots etc. Safety Helmet for Plant Operator Face Mask for all Gum Boots for all Safety Gloves for labour & Operator Safety Helmet for Plant Operator
Facemask
Gum Boots
Safety Gloves
Stationary Items
Sample Testing
Capital invetment cost for technology based operations optimization such that includes installation of GPS , GPS tracker in sludging vehicle , software subscription.
Deduction of Profit of Sale of Organic Manure= 10 KLD*1000*2.5% (t.s)*1.05 (Density)* 15% Moisture
Operation and Maintainance Cost for 5th Year (Appreciation 20% on every item) Manpower for Collection & Transportation Particulars Mazdoor semi skilled(With septage suction machine)
Driver /Tractor Operator
Sanitary Supervisor Diploma Holder
POL Tractor 3500 L Capacity
Desludging Machine
Complete O & M and repair of vehicle and suction pump which includes painting,general engine repair,tyre change,wheel alignment,engine oil change,coolentand other minor repairs,oil and greasing,valve change and pipe change etc.
Complete O & M and repair submersible pump
Complete O & M and repair suction pump
Plant Maintenance Cost Gravel Replacement in PGFB (if porosity decreased)
Replacment of SDB roof sheets
Cleaning ABR
Watchman/Chaukidar
Mazdoor semi skilled(Plant Maintenance & Horticulture)
Power consumptuion of entire plant
Miscellaneous Provide safety gears for driver,operator and labour such that face mask, safety helmet, safety gloves, gumboots etc. Safety Helmet for Plant Operator Face Mask for all Gum Boots for all Safety Gloves for labour & Operator Safety Helmet for Plant Operator
Facemask
Gum Boots
Safety Gloves
Stationary Items
Sample Testing
Capital invetment cost for technology based operations optimization such that includes installation of GPS, GPS tracker in sludging vehicle, software subscription.
Deduction of Profit of Sale of Organic Manure= 10 KLD*1000*2.5% (t.s)*1.05 (Density)* 15% Moisture
Add GST 18% (Item No. 1.00 to 250.00)
Add Sub Tax 1% (excluding Item No. 141.00 and 142.00)
MANOJ KUMAR (BID ID -681586)
stage.html
html • 0.04 MB
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid