8404 SPECIAL REPAIRS TO BLDG NO P 43 SPECIAL REPAIRS TO ROOF OF BLDG NO P 48 AND SPECIAL REPAIRS TO BLDG NO P 64/A AT AIPT UNDER GE (CENTRAL) PUNE

Amount

Demolition of cement concrete (Unreinforced) in ground floors and paving not exc 15cm thick (below or above ground level) and removing debris out side defence and complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing debris out side defence complete all as specified and directed.

M & L for coloured glazed ceramic tiles of size 300 x 450 x 7 to 8mm thick as in vertical surface set and jointed in neat cement slurry and pointed flush in white cement with pigment over and including 10mm thick baking coat of CM 1:4 complete all as specified.

Material and labour for Non skid coloured ceramic tiles of size 300mm x 300mm x 7 to 8mm thick (Square / rectangular) over & including 15mm thick screed bed in CM 1:6 in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles all as directed and specified.

M & L 25mm thick PCC 1:2:4 , type B-0 using 12.5mm graded stone agreegates as levelling course / flooring finished even and fair complete all as specified.

Taking down chowkats or frame with shutter, without taking off shutter from the frames not exc 1.5 Sqm each & removing from site complete all as directed.

Taking down chowkats or frames with shutters without taking off shutter from the frame area exc 1.50 Sqm but not exc 4.0. Sqm each & removing from site all as directed.

S & F factory made wood grain printed (Prelaminated) solid PVC single door frame of size 50 x 47 mm with a wall thickness of 5mm prelaminated colour sheet reinforced with 19 mm x 19mm MS square tube having wall thickness 19 guge complete all as shown in sketch on page 180 of SSR 2020 Part-II complete all as specified and directed.

S & F factory made wood grain printed (Prelaminated) solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes 19 mm x 19 mm having wall thickness 19 gauge for stiles. MS tube 15mmx 15mm having wall thickness 19 mm gauge for top and bottom rails. MS frame shall be covered with 5mm thick heat moulded prelaminated colour PVC 'C' channel having 5mm thick PVC sheet strip 20mm wide struck inside with solvent cement for stiles and 5mm thick PVC sheet for top rail, lock rail and bottom rail on either side and 10mm (5mm x 2mm) thick, 20mm wide cross PVC sheet as gap insert for top and bottom rail. Paneling of 5mm thick prelaminated colour PVC sheet to be fixed in MS frame welded/sealed to the stiles and rails with 5mm x 30 mm PVC sheet beading and jointed together with solventcement complete all as shown in drg give on page 176 of SSR 2020 Part-II. The width of stiles and rails shall be as specified in para 8B.2.1 on page 145 of SSR 2004 Part-II. Each PVC door shutter leaf consist of 4 Nos 100 mm long MS butt hinges. complete all as specified and directed.

S & F 150mm extruded aluminium alloy powder coated handles fabricated type all as specified and directed..

S & F 200mm long aluminium alloy powder coated barrel tower bolt of extruded section all as specified and directed

S & F 150mm long aluminium alloy powder coated barrel tower bolt of extruded section all as specified and directed

S & F 100mm Mild steel butt hinges , medium weight cold rolled all as specified and directed.

S & F anodised aluminium powder coated frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed

S & F fixed glass louvered ventilators using 5mm thick pin headed glass and following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make and rubber beading etccomplete all as specified and directed. (a) SP - 20048 (b) Glazing clips - 19352. Note :- The cost of glass shall deemed to be included in quoted rates.

S & F three track sliding window with two or more shutter with including 5mm thick tinted glass one shutter using stainless steel wire cloth 0.36mm nominal dia & 1.18mm width aperture for mosquito proofing with good quality bearing handle, lock, rubber beading and glazing clips etc using following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make complete all as specified and directed by Engineer-in-Charge. (a) Bottom frame - 20620 (b) Top frame & vertical - 20621 (c) Handle (side) - 20606 (d) Shutter inter lock - 20724 (e) Shutter top & Bottom - 20844 (f) Glazing clips - 19352. Note :- The cost of glass & stainless steel wire cloth shall deemed to be included in quoted rates.

S & F framed work such as grills, gratings etc with ends of bars shouldered and / or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railing, framed work of water tanks and similar work confirming to Fe-290 Grade E-165 including welding etc complete all as specified and directed..

S & F powder coated aluminium door shutters (single / double leaf) or partitions, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, powder coated aluminium snap beading, screws etc. complete all as specified. (Note :- Glass pane shall be measured and paid sepertely under relevant item)

S & F in repair Door closer (Aluminium extruded section body) hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.

S & F 5mm thick sheet glass tinted / frosted glazing with rubber / neoprene gasket fixed to aluminum partition etc complete all as specified and directed.

S & F 12mm thick, prelaminated particle board exterior grade, prelaminated both side with decorative choice laminations & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed.

Dismantling of single layer manglore pattern or similar tiles and ridge in roofing complete all as specified and directed.

Dismantling of fillets, rails, posts, rafters, purlins etc unframed work under 40 Sqcm in section complete all as specified and directed.

Dismantling timber scantling 40 Sqcm and over in cross section in any position unframed work complete all as specified and directed. .

S & F Prepainted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws as specified and directed

S & F Prepainted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, bent to shape as required and directed fixed with self tapping screws as specified and directed.

S & F for MS structural steel work as in framed trusses, purlins, rafter, post , crane grantries, rails and fastening and heavy bracket framing etc including distance pieces , cleats, wind ties etc (Beam, Tee, Angle, Channel or Flat section) incliding shaped washers including necessary cutting required length, notching drilling, riveting and or welding or connecting with nut bolts with angle cleats, fish plate, gusset plate and also erecting in true position conforming to Fe-410W (Grade E-250, quality A) complete all as specified and as directed.

S & F Rolled mild steel plates as in guesset plates, base plates (plain or chequered) channels , square cut or notched (ordianary and countersunk) forming holes wothout any attachment conforming to Fe-410 (Grade E-250 quality - A) complete all as specified and as directed.

M & L for preparation of new or untreated steel surfaces of any description exc 10cm width or girth not other wise described and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed.

Dismantaling Wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards / slabs / blankets, any thickness, including cover fillets etc complete all as directed.

S & F powder coated aluminium snap grid framed work of size 600mm x 600mm for false ceiling and including suspended hangers 6mm dia G.I (upto 1200mm long) adjusting level fixed to roof slabs/purlin/rafter with the help of cleats made out of G.I flat 40 x 3mm of size 60mm long and expansion hold fastener 12.5mm dia 40mm long with including 8mm thick gypsum ceiling board complete with following aluminium anodised sections :- (a) Main and cross Tee shall be of size 36.5mm x 23.5mm x 1.5mm thick and 23.5mm x 23.5mm x 1.28mm thick respectively and jointed at junction/crossing with aluminium anodised angle bracket of size 15mm x 15mm x 1.5mm thick weighing 0.12 Kg/RM fixed with suitable M.S bolt, Nuts & washers as per manufaturere's insructions . (b) The snap grid (Main / Cross Tee) section shall be suported at the end along the wall with aluminium anodised angle of size 40mm x 25mm x 2mm thick weighing 0.36 Kg/RM. (c) PVC protcted sheeting shall be used to avoid scraches, damages to frame work while fixing to ceiling.

M & L for precast cement concrete block masonry exceeding 10cm in width witth solid blocks of PCC (1:5:8) grade D-5 and set in CM 1:6 complete all as specified and as directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for and removing debris out side defence and complete all as specified and directed.

S & F 2000 Litres capacity Rotational moulded polyethylene (HDPE) water tanks, triple layered, ISI Marked cylindrical & vertical type hoisted and fixed in position including provision of 40mm/25mm bore dia spouts for connecting inlet, outlet, over flow and washout pipes including all necessary GI fittings such as nipple, union / sockets etc and connecting up pipes etc complete all as specified and as directed.

S & F 1000 Ltr capacity rotational moulded polythylene water storage tank (Cylinderical vertical with closed top) with including tank nipple 20mm bore hoisted and fixed in position including dismantling of old broken/damaged PVC water tank complete all as specified

S & F 15mm bore dia GI tubing medium grade including all fittings such as bend, elbow, union, tee, short pieces etc fixed to walls / ceiling or laid in floors including cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc and cutting chases for concealed water tubing and making good, cutting not exc 10cm girth in brick or PCC block wall including taking down old steel tubing and connections complete for 15mm bore bore complete all as specified and as directed.

S & F 20mm bore dia GI tubing medium grade including all fittings such as bend, elbow, union, tee, short pieces etc fixed to walls / ceiling or laid in floors including cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc and cutting chases for concealed water tubing and making good, cutting not exc 10cm girth in brick or PCC block wall including taking down old steel tubing and connections complete for 15mm bore bore complete all as specified and as directed.

S & F in repairs 15mm bore dia bib taps , cast copper alloy with crutch or butterfly handle, chromium plated, fancy type, screwed down, screwed for iron pipe or for brass ferrule complete all as directed and specified. Essco Cat Part No -TQT-512 and equivalent make : Jaguar, Marc, Cera

S & F in repairs 15mm , angle cock , cast copper alloy , fancy type , chromium plated with crutch or butterfly handle, screwed down and screwed both ends for iron pipe or for union complete all as specified and directed. Essco Cat part No-TQT-526N and equivalent Make : Jaguar, Marc,Cera

Supply and fix in repairs vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440mm white, with integral foot rests including cast iron 'P' or 'S' trap and connection to trap (but excluding flushing cistern and flush pipe) includintg cement concrete bedding etc if required and including making good to floor complete all as specified and directed.

S & F in repair vitreous China wash down water closet (pedestal pattern), white with including cast iron 'P' or 'S' trap and connection to trap , fixing bolts, seat cover and jet spray etc (excluding flushing cistern and flush pipe) complete connected to drain complete all as specified and directed.

S & F in repair 10 Litre capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and flush pipe complete all as specified and directed.

S & F in repairs 15 mm bore dia PVC connections with PTMT nuts , length 450mm all as specified and directed.

S & F in repair 125mm size brass chromium plated shower rose with or without swivel joints, including fixing to steel pipe or union complete all as specified and directed.

S & F in repairs 15mm stop valve , Long shank concealed type, fancy type , chromium plated , cast copper alloy with crutch or butterfly handle, screwed down and screwed both ends for iron pipe or for union complete all as specified and directed. Essco Cat part No-MQT-514AKN and equivalent make : Jaguar, Marc, Cera

S & F in repairs Vitreous china , coloured colonia snow white , Wash Hand Basin , counter top , oval shape of overall Size 500mm x 400mm excluding pillar taps & waste pipe but including long threaded waste coupling, chromium plated and fixing brackets complete all as specified and directed.

Supply and fix in repairs 15mm pillar taps of cast copper with capstan head, chromium plated, fancy type, screwed down high pressure with or without lettered 'hot' and 'cold' with long screwed shank and fly nut for iron pipe complete all as specified and directed. Essco Cat part No-STE-107001 and equivalent make : Jaguar, Marc, Cera

Supply and Fix in repairs vitreous china bowl urinal , Half stall type with fixing accessories including PVC down waste pipe, fixing plugs etc (but excluding flushing cistern and flush pipe) and fix to walls and connect complete all as directed and specified

Demolition of stone slab or tiles of any description or thickness laid, bedded and pointed in any mortar in floor, skirting, hard standingg, apron etc and removing debris out side defence and complete all as specified and directed.

M & L 20mm thick granite (of any type) work table rubbed and polished in steps, jambs, pillars, window cills, cooking platforms, floor / skirting / risers or as in vertical support or counter top for wash basin and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixtures of pigment to match with shade of granite over and including 15 mm thick screed layer in CM 1:3 with edges polished / rounded as ordered incuding cutting circular or eliptical hole in granite slab and fixing in position complete and ensure best adhesion to surface complete all as specified and as directed.

M & L 20-25mm thick machine cut cudappah stone slab for vertical supports of kitchen platforms and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing of the exposed face complete all as directed and specified

Taking down cement plaster on brick of stone walls of concrete surfaces etc including racking out joints, hacking for key, scrubbing down with water etc and removing debris out side defence and complete all as specified and directed.

Dubbing out average 10mm thick on irregular face of walls (when specifically ordered in writing) complete all as specified and as directed.

M & L rendering 10mm thick in CM 1:6 on fair faces of brick or stone surfaces of walls finished with sponge finish complete all as specified and as directed.

M & L rendering 5mm thick in CM 1:3 on fair faces of brick or concrete surfaces in ceilling finished even & smooth complete all as specified and as directed.

M & L for preparation of newly plastered surface wall and applying two coats of oil bound distemper over a coat of primer of same make over & including 2mm thick wall care putty to obtain the true line to achieve smooth surface complete all as specified and directed .

M & L for 75mm thick PCC 1:3:6 , type C-2 as in plinth protection finished even and smooth without using extra cement including use & waste of necessary form work complete all as specified & directed.

M & L raised pointing to random rubble masonry uncourded or brought upto courses in CM 1:4 complete as all specified.

Demolition and breaking up of drain pipes (Salt glazed ware, AC , Reinforced concrete , PVC , CI ) any dia , set in cement mortar or adhensive and removing debris out side defence and complete all as directed.

S & F 110mm bore dia PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to wall with including stack clamp of suitable size or laid in floors / in trenches complete as all specified.

S & F 75mm bore dia PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to wall with including stack clamp of suitable size or laid in floors / in trenches complete as all specified.

S & F 110mm PVC (SWR) bend , any radius, diminishing pieces or tapers (larger bore measured) fitted with oval access door complete as all specified..

S & F 75mm PVC (SWR) bend , any radius, diminishing pieces or tapers (larger bore measured) fitted with oval access door complete as all specified..

S & F 110mm bore dia PVC (SWR) bends , any radius complete all as directed and specified.

S & F 75mm bore dia PVC (SWR) bends , any radius complete all as directed and specified.

S & F 75mm bore dia PVC (SWR) Nahani trap with SS grating with or without holes including jointing to waste pipe fixed in cement concrete 1:2:4 , type B-1 complete all as directed.

S & F PVC (SWR) gully trap 150 x 100mm square or round mouthed, type P including jointing to waste pipe fixed in cement concrete 1:2:4, type B-1 complete all as directed .

S & F 110mm bore dia PVC (SWR) vent cowl complete all as directed .

S & F 75mm bore dia PVC (SWR) vent cowl complete all as directed .

S & F 110mm bore dia PVC (SWR) junction double, (double T), equal or unequal with access door complete all as directed .

S & F 110mm bore dia PVC (SWR) Coupler complete all as directed .

S & F 75mm bore dia PVC (SWR) Coupler complete all as directed .

S & F in repairs 125mm dia grating round with or without hole CP brass chromium plated complete all as directed .

S & F 20mm bore ball valve, brass, high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule complete all as specified

Supply and fix 20mm dia gun metal, globe or gate valves , ISI marked, with iron wheel head, screwed both ends for iron pipe and fixed complete all as directed.

Supply and fix decorative type curtain rod , stainless steel , 25mm dia with not less than 1mm wall thickness complete all as specified and directed.

Supply and fix decorative type brackets , stainless steel, suitable for above curtain rod complete all as specified and directed.

S & F in repairs Soap dish, Stainless steel or Chromium plated, fixed to plugs with chromium plated brass screws all as specified and directed.

S & F in repairs 20mm dia Brass, Chromium plated, Tubular towel rail, , D type, 60cm long between flanges complete all as specified and directed.

S & F grating dooms 100 mm dia of PTMT (minimum weight 25 gms) all as specified

M & L for 20 to 25mm thick machine cut Kota stone of size 400 x 550mm (minimum) as in flooring laid and jointed with grey cement slurrry mixed with pigments to match the shade of the slab including rubbing and mirror polishing over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed .

All as per item No 82 above but kota stone slab as in riser of steps, skirting , dado and pillar and applying oxalic acid , wax polish to obtain mirror polish finished laid over and including 10mm thick backing coat of CM 1:3 complete all as specified and directed .

M & L Mirror polishing on existing marble / granite / Kota stone / stone work as in flooring / skirting / staircase tread / riser etc where ever required complete all as specified and directed .

M & L for 75mm thick PCC 1:3:6 , type B-2 as in sub base / path finished even and smooth without using extra cement complete all as specified & directed.

Complete removal of existing old bitumenous tarfelt (water proofing treatment) including cement screed bedding and demolition of PCC padding at any height and cleaning the surface with wire brush and washing with water to achieve the original surface of slab including removing debris outsde of defence land all as specified and directed.

M & L for PCC 1:2:4, type B-0 using 20mm graded stone aggegates as in PCC roof padding in roof kerbs or mud stops, rounded and chamfered on edges and on chajjas laid over RCC surface fineshed even and smooth without using extra cement with including necessary liquid water proofing chemicals @ 200ml per bag of cement all as specified and directed . (Note : WPC will be paid measured & paid seperately as supplied only)

Spply only Liquid water proofing chemical

M & L water proofing treatment to RCC roof slab, walls, chajjas ets, shall be carried out as specified below :- (a) Surface Preparation : Minor cleaning work, removal of loose concrete and filling cracks with polymer modified mortar using SmartCare SRP Making of angle fillets all around the periphery of the wall with polymer modified mortar using SmartCare SRP. (b) Pipe Downtake Treatment : Supplying & grouting the gaps around the pipe / inserts with SmartCare General Purpose Grout, a non shrink cementitious waterproof grout. The “Nahani” trap etc is to be fitted securely in the same manner & the gaps around it to be grouted with non shrink Grout. This shall conform the following standards : ASTM C 109 - 1999 18, ASTM C 1107, Grade 'C' complete as per instructiions. Providing 3 coats of SmartCare Ultron and 40-50 Gms polyester fleece sandwiched between 1st and 2nd coats completely up to the top edge of the pipe etc. complete as per manufacturer's instructions. (Cond........)

[Item No 91 Contd...] (c) Waterproofing Coating : Providing and laying SmartCare 3.00mm APP (Atactic Polypropylene Polymer) modified prefabricated five layer 3.00mm thick water proofing membrane, black finished reinforced with non-woven polyester matt consisting of a coat of Smartcare Bitumen Primer for bitumen membrane @ 0.35 Litre/Sqm by the same membrane manufacture of specific gravity, 0.8-1.2 and viscocity 40-70 Sec. Over the primer coat the layer of membrane shall be laid by torching and sealing all joints etc and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Unit weight minimum 3.00 Kg/Sqm, Joint strength in longitudinal and transverse direction at 23°C as 600 / 550 N / 5 cm. Tear strength in longitudinal and transverse direction as 350 / 320 N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM along with no leakage @ 5 bar presuure. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane and top coating with 3 Mangoes Aluminium Paints complete all as specified and directed . Note: The application must be done by authorised applicator agency resgistered in Smart Assure Service. Make : Asian Paint samartcare or equilvalent

Taking down old unserviceable point wiring (light / socket / power) complete including fixtures and fittings such as switches, sockets, ceiling roses, pendants, regulators etc and making good the disturbed surfaces of walls, floors, ceiling etc complete all as specified and as directed.

Taking down Main switches / DBs of any make and type including teak wood board, MCBs / MCCBs etc complete and making good the disturbed surfaces complete all as specified and as directed.

Taking down ceiling fan of any sweep, keeping with safe custody and refixing the same with replacement of unserviceable 3 core PVC insulated PVC sheated 3 core multistranded copper conductor cable of size 23/0.193 from ceiling rose to fan terminal over hauling / servicing the fan complete including replacement of split pin / rubber bush / fan hook / clamps / nuts / bolts / washers etc and Painting of ceiling fans with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc. complete all as specified.

M & L for point wiring of any length using approved colour coding as per IS with stranded copper conductor 1.5 Sqmm (Nominal area) single core, PVC insulated and unsheathed stranded FRLS H cable 1100 Volts grade, ISI-694 marked in PVC casing & caping ISI marked including all accessories etc with Modular sunken boxes including modular frame / cover plate suitable for mounting switches / sockets etc and PVC insulated standed copper conductor 1.5 Sqmm single core cable as earth and connecting to common earth dolly complete all as specified and directed for the following :- Note :- (i) Making good of distrubed surfaces matching with existing finishes will be done by contractor without any extra cost.

One light point controlled by one, One way switch complete all as specified.

One fan point controlled by one, One way switch complete all as specified.

Two light point controlled by one, one way switch complete all as specified.

One 5 pin 5 Amps socket outlet point controlled by one, one way switch on same board complete all as specified.

One 5 pin 5 Amps socket outlet point controlled by one, one way switch on independent board complete all as specified.

One light point controlled by two, two way switch complete all as specified.

All as per item No 94 above but with 2.5 Sqmm (Nominal area) single core, PVC insulated and unsheathed stranded FRLS H cable 1100 Volts grade ISI-694 marked including PVC insulated starnded copper conductor 2.5 Sqmm single core cable as earth and connecting to common earth dolly complete all as specified for one 15 Amps socket outlet point on independent board. Note :- Making good of disturbed surfaces will be done by contractor without any extra cost.

S & F modular switch 6 Amps SP one way 230 Volt, white , ivory finish complete all as specified.

S & F modular switch 6 Amps SP two way 230 Volt, white , ivory finish complete all as specified.

S & F modular socket outlet 2/3 pin 6 Amps, multipurpose , 2 Module , 230 Volts , single pole , one way suitable for plug tops complete all as specified.

S & F modular switch 16 Amps SP One way 230 Volt, white , ivory finish complete all as specified.

S & F modular socket outlet 2/3 pin 16 Amps, multipurpose , 2 module , 230 Volts , single pole , one way suitable for plug tops, complete all as specified.

S & F ceiling rose , surface bakelie type , ISI marked , three terminals complete all as specified and as directed.

S & F modular type stepped type electronic fan regulator ,1 to 5 steps all as specified and directed.

M & L for sub main wiring complete with two single core 6 Sqmm 1100 Volts grade PVC insulated stranded copper conductor FRLS cable with continuous copper earth conductor of 6 Sqmm in and including non metallic PVC conduit including all accessories including taking down old unserviceable / worn out sub main wiring of any type and size complete all as specified. Note :- (i) Making good of disturbed surfaces wiil be done by contractor without any extra cost. (ii) 2 Runs of 6 Sqmm conductor , one run of 6 Sqmm earth conductor and one run of PVC conduit 25mm dia shall be measured as one unit length

S & F in replacement of LED light fitting surface and wall mounted LED batten with Aluminium housing & intergrated electronic driver complete in all respect of 10 Watt capacity complete all as specified .

Suuply and fix in replacement LED Tube light fittings Surface and wall mounted LED batten, extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver with industrial grade heavy duty driver 20 Watt LED complete including all accessories internally prewired and including connecting up with twin core twisted flexible copper conductor cable of suitable size from ceiling rose to connector complete all as specified .

S & F in replacement of round recessed mounted AL die-cast aluminium luminaire in powder coated white finish in round profile with optimized heat sink for efficient heat dissipation of 15 Watt LED downlighter of white / neutral white colour temperature etc prewired and including all accessories complete all as specified and directed.

S & F in replacement LED security light of luminaries 25 Watt complete with all accessories and wall mounting bracket of suitable size including clamps, nut bolts etc prewired and including all accessories complete all as specified and directed.

S & F MCB TPN DB , 4 way double door with 200 Amps rated bus bar 415 Volt all as specified.

S & F MCB SPN DB 8 way double door with 200 Amps rated busbar 240 Vott all as specified.

S & F MCB single pole , rated capacity 6 to 32 Amps, 240 Volts , breaking capacity 10 KA, C-curve complete all as specified.

S & F MCB double pole , rated capacity 32 Amps, 240 Volts breaking capacity 10 KA, C-curve complete all as specified.

S & F MCB four pole , rated capacity 40/63 Amps, 415 Volts, breaking capacity 10 KA, C-curve complete all as specified .

M & L in replacement earthing with galvanised steel earth plate electrode 60cm x 60cm x 6.3mm buried directly in ground earth pit not less than 2.25 Mtr deep below normal ground level with top edge of the plate vertically to depth of not less than 1.5 Mtr below ground level connected to and including GI wire 4mm dia and including GI pipe 15mm bore dia light grade for protection upto the extent of 7.5 Mtr as earthing lead by means of GI bolts and nuts etc connecting to equiment with provn of charcoal and salt etc all as per electrical plate No 3 of SSR Part-I including RCC cover and MS angle iron frame, watering arrangement with GI pipe 20mm bore dia light grade and MS funnel , concrete pit including necessary excavation and earth work in any type of soil and testing on completion etc complete (Note : GI earth wire and 15mm bore dia GI protection pipe light grade upto 7.5 Mtr from earth plate is deemed to be included in quoted rate .)

Anand Trading Co

ANIL CONSTRUCTION CO.

L.T Associate

Parhar Enterprise

Suma Construction

M/s Asrani and sons