Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹46.6 L
EMD Value
₹93,200
Closing Date
26 Nov 2026, 6:00 pm4d left
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Jitender Singh, IDSE, EE
GE (N) Bathinda
ADDN/ ALTN SPL REPAIR TO BLDG. NO P-2031 UNDER GE (NORTH) BATHINDA AT BATHINDA MIL STN
2026_MES_798448_1
8941/NIT-56/26-27/E8
Open Tender
Civil Works
Item Rate
180 days
Bathinda
Class D Category a(i)
8 documents required · 8 mandatory
₹500
GE (N) Bathinda
₹93,200
Yes
12 Nov 2026
12 Nov 2026
28 Nov 2026
12 Nov 2026
26 Nov 2026
19 Nov 2026
12 Nov 2026 - 18 Nov 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Material and labour for providing, fabricating and fixing mild steel framed work for doors, gates and similar assemblies, using MS angles or other approved steel sections conforming to grade Fe 410-0 or Fe 310-0, including cutting, drilling, welding and fabrication with necessary gusset plates, rails, braces, stiffeners and other structural members, making suitable holes for fixing steel sheeting or other approved covering, preparing the frames for hanging or sliding, providing and fixing hooks and hinges or suitable steel hanging door fittings, including hanging, alignment, fastening and securing the frames in position, complete with all necessary welding, bolts, nuts and accessories, complete in all respects, all as specified and as directed by the Engineer-in-Charge. | 1,500 | Kilogram | - | - |
| 2 | Material and labour for providing and fixing 1 mm thick mild steel plain black sheet for wall cladding, steel gates and similar works, including cutting the sheets to the required sizes and shapes, punching necessary holes, bending, folding and turning up edges, forming mitred angles and other profiles as required, fixing to existing or newly provided timber/MS framing with round-headed screws, clout nails or rivets, providing 40 mm wide plain lap joints, and securing the joints by riveting or welding as required, including all necessary drilling, welding, cutting, fitting, alignment and finishing, complete in all respects, all as specified and as directed by the Engineer-in-Charge. | 80 | Square Metre | - | - |
| 3 | Supply and fixing, in repairs, of 2 mm thick fibre-reinforced transparent plain sheeting (glass-reinforced fibre sheet), in individual panes not exceeding 0.50 sqm each, in windows, ventilators and similar openings, including carefully removing the existing damaged glazing/sheeting, cutting and trimming the new sheet to the required size, fixing in position with oil putty, screws and suitable washers, providing necessary overlaps and secure fastening, ensuring proper alignment, watertightness and neat finishing, and making good the adjoining surfaces, complete in all respects, all as specified and as directed by the Engineer-in-Charge. | 250 | Square Metre | - | - |
| 4 | Material and labour for providing and fixing, in repairs, 4 mm thick ordinary-quality sheet glass in individual panes not exceeding 0.50 sqm each, including carefully removing the existing broken/damaged glass and old putty, cleaning and preparing the rebates, cutting and fitting new glass to the required size, glazing and securing in position with approved oil putty, ensuring proper seating, alignment and uniform putty fillets, removing excess putty, cleaning the glass and making good the adjoining surfaces, complete in all respects, all as specified and as directed by the Engineer-in-Charge. | 60 | Square Metre | - | - |
| 5 | Material and labour for providing and fixing, in repairs, 4 mm thick figured glass, pinhead type, in individual panes not exceeding 0.50 sqm each, including carefully removing the existing broken/damaged glass and old putty, cleaning and preparing the glazing rebates, cutting and fitting the new figured glass to the required size, glazing and securing in position with approved oil putty, ensuring proper seating, alignment and uniform putty fillets, removing excess putty, cleaning the glass and making good the adjoining surfaces, complete in all respects, all as specified and as directed by the Engineer-in-Charge. | 10 | Square Metre | - | - |
| 6 | Supply and fixing, in repairs, of mild steel wire cloth having nominal wire diameter of 0.56 mm and average aperture width of 1.18 mm, in existing steel or wooden frames, including cutting and trimming the wire cloth to the required size, fixing tightly and uniformly in position with stainless steel wire staples, ensuring proper tension without sagging or wrinkles, securing all edges firmly and making good the fixing, complete in all respects, all as specified and as directed by the Engineer-in-Charge. | 50 | Square Metre | - | - |
| 7 | Material and labour for carrying out welding work in repairs, for weld joints not exceeding 2.5 cm in length, on metal sections/plates of any thickness, including cleaning and preparing the surfaces to be welded, removal of rust, paint and other impurities, cutting or dressing of edges wherever required, providing suitable electrodes and welding consumables, carrying out electric arc welding to form a sound and continuous weld, chipping off slag, grinding and finishing the welded portion flush wherever required, and applying protective primer to the affected area, if specified, complete in all respects, all as specified and as directed by the Engineer-in-Charge. | 150 | Each | - | - |
| 8 | Material and labour for carrying out welding work in repairs to mild steel/steel sections, plates and other metal components not exceeding 6 mm in thickness, including cleaning and preparing the surfaces to be welded, removal of rust, paint and other impurities, cutting and dressing of edges wherever required, providing suitable welding electrodes and consumables, carrying out electric arc welding to achieve sound and continuous weld joints, chipping off slag, grinding and finishing the welded portions wherever required, and applying protective primer to the affected areas, if specified, complete in all respects, all as specified and as directed by the Engineer-in-Charge. | 100 | Per Ten Running CM | - | - |
| 9 | Material and labour for preparing new steel and iron surfaces of any description, not otherwise specified, exceeding 10 cm in width or girth, including removal of rust, mill scale, dust, grease and other foreign matter by wire brushing, scraping and cleaning, applying one coat of approved red oxide metal primer uniformly over the prepared surface, followed by two coats of approved synthetic enamel paint of required shade and finish, allowing adequate drying time between successive coats, including all necessary surface preparation, application, tools and tackles, complete in all respects, all as specified and as directed by the Engineer-in-Charge. | 600 | Square Metre | - | - |
| 10 | Material and labour for preparing old painted steel and iron surfaces of any description, not otherwise specified, exceeding 10 cm in width or girth, including cleaning the surface to remove dust, dirt, grease and other loose particles by rubbing with sandpaper, wiping with clean cloth and brushing with a dry paint brush, ensuring that the existing paint surface is sound and suitable for repainting, and applying one coat of first-quality approved synthetic enamel paint of required tint/colour by brush to obtain a uniform, smooth and glossy finish, including all necessary materials, labour, tools and tackles, complete in all respects, all as specified and as directed by the Engineer-in-Charge. | 2,500 | Square Metre | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 3.14 MB
tenderdocuments56.pdf
Tender Documents • 1.25 MB
BOQ_895706.xls
BOQ • 0.94 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .