REPAIR, RECANNING AND RESTORATION OF ALL WOODEN AND STEEL CHAIRS AT MD ACCN AND UNITS OF BMU, DHQ-5 AND ICGAS CHENNAI AREA UNDER GE (I) (CG) CHENNAI

Amount

CHAIR VERANDAH:-, FD-256 ,259,FD/MAP-II/06

Spot gas welding to broken parts/joints of chairs.

Removing of existing torn out/unserviceable plastic cane from chair verandah and recanning the chair fully both seat and back with new plastic cane of virgin quality white, half round of size 4mm wide and 0.60 mm thick.complete all as specified and shown on drawing.The canning shall only be done after painting the chair.

Removing the old broken shoes of chairs and Supply and Fixing best quality new PVC shoes to the legs of chair.

Removing the existing unserviceable/broken PVC seat and back from the chair,supply and fixing new PVC seat and back 4mm thick to the chair verandah MAP after providing one flat iron of size 20mmx5mm in support of PVC seat at centre between two sides through proper welding .The PVC seat shall got approved from GE before supply.The PVC seat shall be fied only after painting the chair.

Painting the frame of the chairs by two coats of synthetic enamel white of approved quality paint after prepartion of steel surface by sanding with sand emery paper and dusting the surface with clean cloth.The chair frame shall be made smooth by applying metal putty whereever required.

CHAIR CB STEEL WITH ARMS:FD-75(M)

Scratching the entire frame of chair and applying one coat of synthetic enamel paint after preparation of surfaces by removing the old paint with sand emery paper. Complete all as specified and as directed by Engr-in-Charge

Remvoing the old unserviceable and broken MS flat and supply and fixing MS flat of size 25mmx4mm welded beneath in between the width of the chair for support of seat.

Removing the old unserviceable seat from the frame of the chair. Supply and fixing new seat made of teak wood duly polished in natural shade including cane work in godrej pattern, fitting in position with 04 nos of nut bolts and washers of length 60-65mm

Removing the old unserviceable back from the frame of the chair. Supply and fixing new back made of teak wood duly polished in natural shade including cane work in godrej pattern, fitting in position with 04 nos of nut bolts and washers of length 60-65mm

Removing the old unserviceable arm and supply and fixing new arm of 1st class teak wood as per drg.

Removing the old unserviceable Hard rubber shoes and supply and fixing new Hard rubber shoes as per drg.

Removing the old unserviceable rubber caps and supply and fixing new rubber caps as per drg.

CHAIR CB STEEL WITHOUT ARMS: FD-75(M)

Scratching the entire frame of chair and applying one coat of synthetic enamel paint after preparation of surfaces. Complete all as specified and as directed by Engr-in-Charge

Removing the old unserviceable and broken MS flat and supply and fixing MS flat of size 25mmx4mm welded beneath in between the width of the chair for support of seat.

Removing the old unserviceable seat from the frame of the chair. Supply and fixing new seat made of teak wood duly polished in natural shade including cane work in godrej pattern, fitting in position with 04 nos of nut bolts and washers of length 60-65mm

Removing the old unserviceable back from the frame of the chair. Supply and fixing new back made of teak wood duly polished in natural shade including cane work in godrej pattern, fitting in position with 04 nos of nut bolts and washers of length 60-65mm

Removing the old unserviceable Hard rubber shoes and supply and fixing new Hard rubber shoes as per drg.

Removing the old unserviceable rubber caps and supply and fixing new rubber caps as per drg.

CHAIR EASY,FD-229,358 :-

Removing the old unserviceable rear leg and supply and fixing new rear leg of 1st class teak wood as per drg.

Removing the old unserviceable front leg and supply and fixing new front leg of 1st class teak wood as per drg.

Removing the old unserviceable rail and supply and fixing new rail of 1st class teak wood as per drg.

Removing the old unserviceable leg stiffener and supply and fixing new leg stiffener of 1st class teak wood as per drg.

Removing the old unserviceable Back rest and supply and fixing new back rest of 1st class teak wood as per drg.

Removing the old unserviceable arm and supply and fixing new arm of 1st class teak wood as per drg.

Supply of wooden brackets made to shape in size 3"x 3" of thickness 25mm and fixing 08 x Nos of brackets to each leg and rail with adhesive and headless nails.

Removing the existing unserviceable cane plastic and recanning the chairs in true Godrej pattern with plastic cane 2mm to 2.5mm wide of white colour 1st quality.The border of seat and back shall weaved with 4mm wide cane.The canning of chairs shall only be carried out after complete polishing process as specified and as shown on drgs.

Polishing to wooden article with french polish of approved grade and brand after cleaning,dusting and scratching the entire wooden surface of article with hand grinding machine,filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship.The polishing shall be carried out only after making the article intact by carying out necessary repair by nailing and glueing and carrying out antitermite and antibug treatment.

CHAIR WRITING,FD-261,360,250/TP/FD/E6/MAP/12

Removing the old unserviceable Back rest and supply and fixing new back rest of 1st class teak wood as per drg.

Removing the old unserviceable leg stiffener and supply and fixing new leg stiffener of 1st class teak wood as per drg.

Removing the old unserviceable front leg and supply and fixing new front leg of 1st class teak wood as per drg.

Removing the old unserviceable rear leg and supply and fixing new rear leg of 1st class teak wood as per drg.

Removing the old unserviceable rail and supply and fixing new rail of 1st class teak wood as per drg.

Removing the old unserviceable arm and supply and fixing new arm of 1st class teak wood as per drg.

Supply of wooden brackets made to shape in size 3"x 3" of thickness 25mm and fixing 08 x Nos of brackets to each leg and rail with adhesive and headless nails.

Removing the existing unserviceable cane plastic and recanning the chairs in true Godrej pattern with plastic cane 2mm to 2.5mm wide of white colour 1st quality.The border of seat shall weaved with 4mm wide cane.The canning of chairs shall only be carried out after complete polishing process as specified and as shown on drgs.

Polishing to wooden article with french polish of approved grade and brand after cleaning,dusting and scratching the entire wooden surface of article with hand grinding machine,filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship.The polishing shall be carried out only after making the article intact by carying out necessary repair by nailing and glueing and carrying out antitermite and antibug treatment.

CHAIR DINING ,FD-279,262,228,FD/MAP-II/05

Removing the old unserviceable Back rest and supply and fixing new back rest of 1st class teak wood as per drg.

Removing the old unserviceable leg stiffener and supply and fixing new leg stiffener of 1st class teak wood as per drg.

Removing the old unserviceable front leg and supply and fixing new front leg of 1st class teak wood as per drg.

Removing the old unserviceable rear leg and supply and fixing new rear leg of 1st class teak wood as per drg.

Removing the old unserviceable rail and supply and fixing new rail of 1st class teak wood as per drg.

Supply of wooden brackets made to shape in size 3"x 3" of thickness 25mm and fixing 08 x Nos of brackets to each leg and rail with adhesive and headless nails.

Removing the existing unserviceable cane plastic and recanning the chairs in true Godrej pattern with plastic cane 2mm to 2.5mm wide of white colour 1st quality.The border of seat shall weaved with 4mm wide cane.The canning of chairs shall only be carried out after complete polishing process as specified and as shown on drgs.

Removing the existing unserviceable PVC seat and S&F new PVC seat of good quality as specified and as shown on drgs.The PVC seat shall got approved from GE before supply.The PVC seat shall be fitted only after polishing the chair. Make: Amko / Nilkamal / Supreme

Polishing to wooden article with french polish of approved grade and brand after cleaning,dusting and scratching the entire wooden surface of article with hand grinding machine,filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship.The polishing shall be carried out only after making the article intact by carying out necessary repair by nailing and glueing and carrying out antitermite and antibug treatment.

CHAIR REVOLVING/CHAIR EXECUTIVE/CHAIR DETACHABLE CUSHIONED /CHAIE EXECUTIVE SPECIAL (TP)

Removing the existing torn out tapestry cloth ,pressed foam cushion,elastic webbing tape,PVC lipping from seat and back by unscrewing the seat and back from frame of chair carefully.S&F new seat and back made by using 60mm thick 40 density foam sheets,new webbing tape,new PVC lipping duly covered with new tapestry cloth of approved colour and texture of rate not less than 350 per mtr.The fixing of cloth shall be done by using heavy duty gun tacker.The seat and back shall also be covered with plastic transparent film.Complete all as specified and as directed.

Removing the existing torn out tapsetry cloth from seat and back of chair carefully after removing the PVC lipping.S&F new tapestry cloth of approved colour and texture to seat and back of chair along with PVC lipping to restore the chair in original shape ,the rate of cloth shall not be less than 650 per mtr.The fixing of cloth shall be done by using heavy duty gun tacker.Complete all as specified and as directed.

Removing old unserviceable arm rest of chair and S&F new arm of same shape and size ,made of black/Grey integral skin polyurethane with 75-85 shore 'Á ' hardness & reinforced with MS insert all as specified and directed by Engr -in -charge.

Removing unserviceable castor twin wheels and S&F new castor twin wheel suitable for chair computer all as directed

Removing unserviceable 5 spokes stainless steel adjustable pedestal assembly, S&F new 5 spokes stainless steel adjustable pedestal assembly to chair computer all as specified and directed by Engr -in charge.

Removing unserviceable hydraulic gas lift cylinder of chair ,S&F new hydraulic gas lift cylinder to chair.Complete all as directed and shown on drawing.

Painting/Polishing to all steel and metal portion of chair revolving/chair executive/chair detachable cushioned and chair executive special with one coat of synthetic enamel paint applied as per existing shade after cleaning,dusting and scratching the entire metal surface of chair with sand paper ,making surface neat and smooth as directed by Engr-In-Charge

SHANMUGA TRADERS (BID ID -3266227)