REPAIRS TO ROOF, TOILET, JOINERIES AND OTHER MISC B/R WORKS AND INTERNAL ELECTRIFICATION UNDER GE NASIK ROAD.

Amount

M&L for preparation of old decorated plastered or unplastered surfaces including brooming down moulds & efflorescent salt & trading oil & greasy spots and applying one coat of white wash on walls.

All as per item No 1 Above but on ceiling.

M&L for 3mm thk wall care putty on walls

M&L for 3mm thk wall care putty on ceiling

M&L for Complete removal of existing treatment on walls by washing, rubbing down,stopping and applying two coats of oil bound distemper white or tinted on walls incl primer coat as prepratory to distemper .

All as per item No 5 Above but on ceilling

M&L for preparation of old painted wooden surfaces of any description not other wise described exc. 10 cm width or girth and applying one coat of synthetic enamel paint.

M&L for preparation of old painted steel surfaces of any description not other wise described exc.10 cm width or girth and applying one coat of synthetic enamel paint

M&L for preparation of old surfaces of walls by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots; removing nails, making good holes, cracks etc. and applying one coat of exetior emulsion paint (apex/weathercoat) on walls and ceiling plastered or unplastered surfaces .

M&L for preparation of old surfaces of walls by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots; removing nails, making good holes, cracks etc. and applying two coat of exetior emulsion paint (apex/weathercoat) on walls and ceiling plastered or unplastered surfaces .

Cleaning of under ground sewage line of 150 mm bores, between manholes, any depth (including cleaning of manholes) clogged with solid waste/semi liquid mud or sludge by manual rodding or by mechanical means and disposing off the sludge hygeinically as directed by Engr-in-Charge.

Cleaning of under ground sewage line of 200 mm bores, between manholes, any depth (including cleaning of manholes) clogged with solid waste/semi liquid mud or sludge by manual rodding or by mechanical means and disposing off the sludge hygeinically as directed by Engr-in-Charge.

Cleaning of manholes of any size and depth and getting out of sludge, water, effluent etc. and removing all loose sediment, sand sludge, grit, ash etc. and disposing off hygeinically as directed by Engr-in-Charge.

Cleaning of blocked WC, floor trap, nahani trap, WHB any size removing sludge and waste material and disposing off hygeinically as directed by Engr-in-Charge.

Taking down of PVC rain/ vent/ waste pipe any bore.

S&F PVC (SWR) bends, any radius 110 mm bore complete all as specified and directed.

S&F PVC (SWR) branch piece, double (double Y) equal or unequal 110 mm bore with access door all as specified and directed.

S&F PVC (SWR) junction (single 'T') equal or unequal, bore 110 mm with access door, complete all as specified and directed.

S&F PVC (SWR) pipe single socketed 110 mm bore, any in length with rubber ring joints fixed to walls complete all as specified and directed.

Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc.

M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 using old size bricks.

Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.

M&L for Rendering 15mm thick in cement mortar 1:6 on faces of brick work or concrete surfaces finished fair and even.

M&L for preperation of new plastered surface of walls and applying two coats of oil bound distemper white or tinted on walls over 3 mm thick(average) wall care putty incl primer coat as prepratory to distemper .

Repairing of broken edges of RCC chajjas, roof projections, fins, facia and similar works by dismantling of loose and damaged/ disintegrated portion of edges (cross sectional aerea not exceeding 150 sqcm) with cement mortar 1:4 or cement concrete 1:1½:3 type A0 and chicken wire mesh with nails (to hold fresh mortar/concrete) including necessary formwork etc. and scaffolding for work upto four storied buildings and finishing the surface by white wash or cement base paint to match the surface with existing work.

Plastering on walls in cement mortar 1:4 in patches not exc. 3 Sqm on the buildings upto four storied, including taking down old plastering on walls, any description including finishing the surface to match existing surfaces including necessary scaffolding and finishing the surface by white wash or cement base paint to match the surface with existing work.

Taking down chowkhats or frames with shutters (without taking off shutters from the frame) n exc 1.5 sqm each and making good the jambs, soffits of lintels etc. after fixing of new chowkat or frame to match the existing surface.

S&F aluminium (minimum 50 micron powder coated) frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified.

S&F aluminium (minimum 50 micron powder coated) door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc. complete all as specified.

S&F aluminium (minimum 50 micron powder coated) window and ventilator shutters, side hung/sliding type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays/tower bolt 150mm long (1 No.) hinges type B-21, 100mm long (2 Nos.), suitable handle (1 No.), rollers, grip etc. complete all as specified.

Dismantling wrought iron or mild any description such as steel gate, steel frame works, purlins, rafter, railings, balusters and window guard bars and directed by Engr-in-Charge.

S&F Framed work as in grill, doors or gates of angle or other section with gusset plates, braces, etc, complete, drilled for fixing of steel sheeting or other covering, Doors, etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing Fe Grade 290(Gde E-165) complete all as specified and directed by Engr-in-Charge.

S&F 3mm thick sheet glass, ordinary quality and glazing with silicon gel in square n exc 0.5sqm in each pane.

S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples.

M&L for Preparing new untreated steel or iron surfaces over 10cm width or girth and and two coats of synthetic enamel paint over and including a coat of red oxide.

Taking down chowkhats or frames with shutters (without taking off shutters from the frame) exc 1.5 sq. m but n exc 4 sq. m each and making good the jambs, soffits of lintels etc. after fixing of new chowkat or frame to match the existing surface.

Taking down shutters of any descriptin exc 1 Sqm and n. exc 2 Sqm each.

M&L for 35mm thick second class hard, wood factory, made glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats.

S&F factory made plain framed paneled shutters 35mm thick of 2nd class hard wood (any number of panels ) with panels of timber flat on both sides feather edges or panel of 9mm BWP commercial ply over 12mm thick veneered particle board with commercial face veneers fixed to chowkat. The size of rail and stile as per IS: 1003 (Part-1), kiln seasoned and chemically pressure treated complete all as specified and directed.

M&L for 35mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides.

M&L for Preparing new wood or wood based surfaces over 10cm width or girth and two coats of synthetic enamel paint over and including a coat of pink primer.

S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm single side prelam PVC sheet reinforced with M.S. square tube, supplying & fixing in opening as per specification and drawing.

S&F Factory made solid PVC moulded door shutter with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2 mm thick moulded prelam PVC Sheet on the front face and 2 mm prelam PVC sheet on back face, supplying & fixing in frame at site as per specification and drawing.

S&F 100mm butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21.

S&F 200mm size aluminium anodised, barrel tower bolts of extruded section and fixed.

S&F 300mm size aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing debris out of MOD land and rubbish off the premises

M&L for light shade vitrified ceramic tiles (Superior quality) 10mm thick (square/rectangular) polished, area of each tiles not exc 0.36 Sqm in floors etc set & jointed in neat cement slurry and pointed in white or coloured cement to match including Screed bed or bedding layer of mortar 15mm thick for laying floor finishes cement plaster 1:6 complete all as specified and directed

M&L for Vitrified Ceramic tiles (Superior quality) 10 mm thick (square/ rectangular) polished in skirting etc. cut out of tiles of area not exceeding 0.36 sqm, set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including rendering 10mm thick in CM 1:4 as in backing coat on fair surfaces of brick wall

M&L for Non - skid coloured ceramic joint free tiles 7 to 8 mm thick (square/rectangular) tiles exceeding 0.06 sqm but not exceeding 0.11 sqm each, in floors etc. laid over and including 15mm thick cement mortar screed bed in cement mortar 1:4, set and jointed in neat cement slurry and pointed in coloured cement to match.

M&L for Colour Glazed ceramic joint free tiles in vertical surface 350 x 250 x 7mm / 450 X 350 X 7mm thick, laid over and including 10mm thick rendering in cement mortar 1:4, set and jointed in neat cement slurry and pointed in coloured cement to match.

M&L for special treatment to sunken portion with 10mm thick plaster in CM 1:4 by using Ditachment DM 1% by weight of cement and surface made smooth after curing period two coat of Ditachment DS shall be applied @2.50 Kg/Sm. The paste like consistancy like is made by using 2.5 Kg of Ditachment DS powder in one litre of admixture (The admixture is made by dissolving 1 part by volume of Nafufill SBR & 4 part by volume of water). After 7 days curing, testing shall be done by flooring for 72 hours. Finally protective plaster coat of 10mm thick in CM 1:4 shall done by using Putz Ditachment 1% by weight of cement over layer of Detachment DS. All joints of CI Pipe, Nahani trap, WC connection etc. shall be filled by mixture of cement, fine sand and 10% Nafufill SBR by weight of cement 32mm dia 450mm long GI Spout light grade shall be provided in all sunken slabs to drain off water

S&F in repair Vitreous China water closet squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests and P trap (excluding flushing cistern and flush pipe) complete including provision of lime concrete bedding.

M&L for 10 litres capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including flush pipe and brackets fixed in repairs.

S & F in repair EWC and flush combo, vitreous China white ('Deimos' 92044 of Hindware or equivalent) all as directed as directed.

S & F in repair EWC vitreous China white all as directed as directed.

S&F Vitreous China wash basin white, flat back, size 550 X 400mm, including cutting for and pinning in ends of brackets or erecting stand, with and including 32mm waste fitting brass, chromium plated with long screwed shank and fly-nut, flange end bedded in red lead cement, brass chromium plated bottle trap with inlet and outlet screwed for pipe or connections 32mm bore, including necessary packing, union and cap and fixed in repairs.

S&F Vitreous China urinals, half stall type (back or corner wall type), white complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; with and including 5 litres PVC automatic flushing cistern, including brackets, flush pipe, CP urinal spreader, grating union, , union and cap and discharge pipe; fixed in repairs.

Cast iron nahani trap 75mm dia of outlet, with stainless steel grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4)

Taking up or down steel tubing and connections 15mm bore including bib taps, stop cock etc.

Refixing old steel tubing and connections 15mm bore in new or old position (Walls, ceiling, floors, etc.)

S&F 15mm bore galvanised steel water tubes, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors.

Taking up or down steel tubing and connections 20mm bore.

Refixing old steel tubing and connections 20mm bore in new or old position (Walls, ceiling, floors, etc.)

S&F 20mm bore galvanised steel water tubes, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors.

S&F 15mm bore bib taps, fancy type, cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed in repair.

S&F in repair hand shower (Health faucet) 1 Mtr PVC tube with wall hook (CP) complete all as specified and directed.

S & F Brass CP wash basin mixer for mixing hot & cold water scrwed down for iron pipe and 15 mm bore fixed in repair.

Brass CP ixer for mixing hot and cold water, screwed down for iron pipe 15mm bore and fixed in repairs.

S&F 15mm bore fancy type pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed.

S&F 15mm bore stop valves, cast copper alloy, fancy type, chromium plated (angle type) screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed.

S&F 15mm bore stop valves, cast copper alloy, fancy type, chromium plated with long shank and cup (concealed type) screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed.

S&F PVC connections 15mm size with PTMT nuts of length 450mm

S&F 32mm bore low density polyethylene (LDPE) pipes of pressure rating 6 kgf/sqcm including fittings.

S&F Brass chromium plated shower rose 125mm size with swivel joint, including fixing to steel pipe or union 15mm bore.

S&F Sinks made of stainless steel l mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm.

Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc. laid, bedded and pointed in any mortar.

M&L for Granite (of any type) work 16-18mm thick machine cut, (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like laid over and including 15mm thick screed bed in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match.

M&L for Machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete

M&L for Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations. (Stone slabs so provided shall be not less than 900mm in length)

Dismantling water tanks exc 250 & n exc 500 ltr capacity.

S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) 500 litre capacity, hoisted and fixed in position all as specified.

Dismantling water tanks exc 500 & n exc 1000 ltr capacity.

S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) 1000 litre capacity, hoisted and fixed in position all as specified.

S & F ball valves, 20mm bore high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 210gms) fixed in repairs.

M&L for fixing in repair 25 mm matt finish Stainless steel curtain rod best quality as approved by Engr-in-charge

M&L for fixing in repair Stainless steel socket bracket with bore of 25mm for dead end of curtain rod .

M&L for fixing in repair Stainless steel ornamental piece with bore dia of 25 mm for free end of curtain rod .

M&L for fixing in repair Stainless steel projecting bracket to support curtain rod of size 25mm.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.

Taking down and hanging during point wiring of ceiling fan/exhaust fan of any size and sweep in proper manner and connecting up including provision of cable from ceiling rose or connector to fan all as per specified and directed by Engr-in-Charge

Dismantling unserviceable main switch/DBs with MCBs and wooden board including making good disturbed surface of wall.

Taking down sub main wiring of any size/capacity complete all as specified and making good disturbed sufaces to match with the existing surfaces.

M&L for Point wiring with PVC insulated unsheathed stranded copper conductor cable of size 1.5 Sqmm, with PVC insulated unsheathed stranded copper conductor cable of size 1.5 Sqmm stranded for earth continuity wire, to be drawn in and including, PVC medium grade surface casing capping not less then 20 mm width with MS sheet metal sunken switch/Terminal box 1.2 mm thick and ebonite switch board cover 3.0 mm thick or PVC moulded switch board and brass screws with cup washers including all necessary wall cutting and making good disturbed surface all as directed and specified. Note : Cutting chases and making good to match with the adjoining surface shall be included in the unit rate.

One light point controlled by one, one way switch

One light point controlled by two 2-way switches, with cables 1.5 sq. mm size

One ceiling /exhaust fan point controlled by one switch and regulator

One 3 pin 5 amp socket out point on the same board with other switches.

One3 pin 5 amps socket out let point on independent board

One bell/buzzer point controlled by one bell push.

All as per same in item No 95 above but for one socket outlet 15 amp on independent board with 2.5 Sq. mm cable and 2.5 Sq.mm. earth wire.

S &F Switch piano flush type single pole one way 5 amps.

S &F Switch piano flush type single pole two way 5 amps.

S &F Socket outlet 2 in 1, 3 pin, 6A

S &F Switch socket combination 2 in 1, 6A flush type

S &F Switch socket combination 2 in 1, 3 pin, 6 and 16 Amp flush type universal

S &F Ceiling rose, 3 phase/PVC/polycarbonate, isolated body

S &F Buzzer, Ding Dong AC. 230 volts, single pole

S &F Bell push, flush type, 5 amp.

S &F Electronic regulator 100/120 Watt step type

S &F Lamp holder insulated body with back plate for angle holder including 9W LED Lamp all as per specified.

Taking out defective capacitor and supply and fix new capocitor of 2.5 MFD 230 volts with conector(capacitor holder with nut) including PVC clamps nuts , as approved make for various make of ceilling fan complete all as specified as directed.

S & F in repair decorative gate/garden light made up of high grade unbreakable polycarbonate material suitable for LED lamp upto 20W B22 base including connecting up with twin core twisted flexible copper conductor cable, 10 LED lamp, foundation and housing PVC pipe etc complete all as specified and directed.

Supply and fixing LED lights fitting 1x 20W, 220V, AC, decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete.

Supply and fixing round shape 6 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete..

Supply and fixing round shape 12 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete.

Supply and fixing round shape 15 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete..

S&F in repair 20 Watt LED Tube Light (4 feet) (Double Side Connection) Ultra bright glass with very high efficacy suited for installation in existing T8 fitting with G13 lamp holders or lamp holders as required in site. Complete all as specified and directed.

S & F 15 Watt LED streetlight fitting luminaire made up of pressure die cast aluminium housing with high efficient LED as lighting source and PC cover having TOP Opening seperate driver compartment with IP66 protection and impact resistance of IK07 , including coneecting up with 2/3 core flexible coppper conductor cable , compete all as specified and directed by Engr-in-Charge.

Fabrication,supply & fixing of GI pipe bracket up to 40 mm dia- 0.9m long & 2 set of clamps made out of 30x5mm ms flat & fixed with anchor bolt suitable for 15 w LED security light fitting

Refixing of tube light from exisiting position to new position as required at site all as directed and specified .

Refixing of wooden/PVC rectangular block for mounting, switches, sockets,fan regulator, call bell, bell push etc. with 3 mm thick plastic laminated sheet cover/helum sheet of ISI mark as required on ground including casing capping /conduit of any size, all as specified and directed by Engr-in-Charge.

Refixing of DB's including MCB's of any size, all as specified and directed by Engr-in-Charge.

Taking down and fixing partly unserviceable LED security light fittings (building) of any make and type for necessary repair including ractifing any kind of electronic disorder/Circuit disorder/replacement of LED strip/all other accessories and make it serviceable , complete all specified and directed by Engr-in-Charge. Note: (1) Ladder to be provided by contractor. (2) Spare i.e driver shall be measured seperately.

S & F in repair electronic driver 12/15 Watt suitable for security light fittings new generation energy saving and environmental friendly long life LED street light/building security light of any make and type, all as specified and directed by Engr-in-Charge.

Material and labour for sub main wiring power/circuit using PVC insulated unsheathed, stranded copper conductor cable 2 Single core of size 2.5 Sqmm, earth continuity conductor of size 2.5 Sqmm to be drawn through and including PVC CASING CAPING not less then 20mm dia medium Grade fixed on walls/roof/floors all as directed by Engineer in Charge. Notes:- Two wires of 2.5 sqmm and one wire of 2.5 sqmm for earthing and one run of PVC casing/caping shall be measured as one unit.

Material and labour for sub main wiring power/circuit using PVC insulated unsheathed, stranded copper conductor cable 2 Single core of size 4 Sqmm, earth continuity conductor of size 4 Sqmm to be drawn through and including PVC casing capping not less then 32mm dia medium Grade fixed on walls/roof/floors all as directed by Engineer in Charge. Notes:- Two wires of 4 sqmm and one wire of 4 sqmm for earthing and one run of PVC casing capping shall be measured as one unit.

Material and labour for sub main wiring power/circuit using PVC insulated unsheathed, stranded copper conductor cable 2 Single core of size 6 Sqmm, earth continuity conductor of size 6 Sqmm to be drawn through and including PVC CASING CAPPING not less then 32mm dia medium Grade fixed on walls/roof/floors all as directed by Engineer in Charge. Notes:- Two wires of 6 sqmm and one wire of 6 sqmm and one run of PVC casing capping shall be measured as one unit.

S&F Sheet metal enclosure factory made for DBs single pole and neutral double door 240 volts 8 way with 200 Amps rated bus bar fixed on walls, including dressing and connecting both incoming and outgoing cable termination with proper taping, lagging testing and commissioning and making good of wall, surfaces all as specified and directed.

S&F Sheet metal enclosure factory made for DBs single pole and neutral double door 240 volts 4 way with 200 Amps rated bus bar fixed on walls, including dressing and connecting both incoming and outgoing cable termination with proper taping, lagging testing and commissioning and making good of wall, surfaces all as specified and directed.

Supply and fix for MCB TPN 415 Volts, 'C' series, breaking capacity 10 KA of rating 63Amps

S&F MCB, single pole and neutral, 240 Volts , 40-63 Amps all as specified and as directed.

S&F MCB, single pole and neutral, 240 Volts , 6-40 Amps all as specified and as directed.

S&F MCB singal pole 240 Volts , 32 to 63 Amps all as specified and as directed.

S&F MCB singal pole 240 Volts , 6 to 32 Amps all as specified and as directed.

Taking down/dismantling/handing of ceiling fan, segregation of unserviceable parts, cutting and removing out copper winding, cleaning the armature, rewinding of fan armature with appropriate gauge of super enamelled copper wire with necessary insulating materials such as vertex paper, cotton tape, PVC insulation tape,Rotter soft etc varnishing with approved grade of insulation varnish and heating up, re-assembling the fan complete with replacement of unserviceable spares parts, including spare parts, painting and necessary lathe work for fixing of bush/bearing greasing the same with approved grade of grease, making all electrical connection and including supply and fixing the following items ( Split pin - 02 Nos, Connection block - 1 No and Insulation rubber bush. - 01 No, Condensor-01 No, bearing- 01 or 02 Nos, gun metal bush-01 No if required) and including necessary transportion to workshop, for 1200/1400MM sweeps of ceiing fan .

NOTE :- AMOUNT OF SCHEDULE OF CREDIT RS. 27,299.00 WILL BE DEDUCTED FROM TOTAL AMOUNT OF BOQ.

M/S SAMEER SUBHASH PATANI

Bidder Name

M/S SAMEER SUBHASH PATANI

SVT ENGINEERS AND CONTRACTOR.