WBPHED/EE/AMD/ NIeT-25 of 2025-2026/7

Amount

PART-A :Supply and installation of electro-mechanical accessories and other allied works

Vertical submersible pumping machinery conforming to IS 8034 directly coupled with wet winding type suitable size submersible motor conforming to IS 9283 with standard MOC for portable clear water and BEE 3star rated ,continuous duty(s1) with following specification:Discharge-20 m³/Hr at a head of 65 mtrs. Motor submersible type 3 Phase 50 Hz,±6%, 415Volt +/- 10%, 2900 RPM. Capacity-7.5 HP SDS ( H/Q Characteristic Curve of pump set & Test Certificate including G.C. of the P/M set should be submitted before delivery.) (Make - Approved Make)

a)3 CoreX 4 Sqmm water proof flat copper cable,suitable for above pump set as per IS:694/2010. (Make- Approved Make)

3 Core X 10 Sqmm,1.1 KV grade AI Armoured XLPE conforming to IS:1554/7098(Part-I) 1998. (Make- Approved Make.)

25mm², 1.1KV grade, 3.5 Core, Aluminum Conductor, Armored, XLPE Cable. The material must be confirmed to IS: 1554/7098(PART-1)1988( Make -Approved make)

100 A TPN Main Switch with Re-wireble fuse link within sheet steel enclosure.(Make- Approved Make)

100 Amp 4 way copper BusBar Chamber Box by 16 SWG Sheet steel enclouser including porcelin chair etc. with painting complete as per direction of EIC.

FASD Motor Starter with relay range 6 - 10 Amp, with With Wideband Coil Single Phase Preventer (Make- L&K /other approved make, Model No-MU-G15 FASD)

Supply and delivery of the following valves,pipes and specials etc at site:-

3 mtr long 80 mm dia UPVC standard type collumn pipe (cream colour) with both side threaded and one end side socketed with registered KPMG.

1.5 mtr long 80 mm dia UPVC standard type column pipe (cream colour) with both side threaded and one end side socketed with registered KPMG

80 mm dia CI Top & Bottom adopter.

Heavy type suitable dia. MS Suspension clamp along with nuts,bolts and washers.

80mm dia Cast iron double flanged Non- Rising Spindle Sluice Valve generally confirming to IS 14846 having body door /dome/Bonnet and cover of cast Iron Gr FG 260, Spindle of IS 6603, Gr-12 cr-13, spindle nut & seat rings are of Gunmetal as per IS:318 LTB 2.Flanges flat faced and drilled to IS:1538 Part IV & VI, Valves are suitable for maximum working pressure of 10 kg/sqcm (seat test) and body tested to 15 kg/sqcm 350 NB and above valves should be provided with enclosed gear box and antifriction device for ease of operation. (1 No for Washout Line and 1 No for Delivery Line)

80 mm dia Cast iron double flanged single door swing non-return valve generally conforming to IS:5312 Part I, having body, door, cover in graded cast iron to IS:210 Gr.FG200, body and door rings & bearing block of leaded tin bronze to IS:318 Gr.LTB 2 (350mm & above), hinge pin of st.st.AISI410, valve suitable for a maximum working pressure of 10 kg/cm2 (Seat test) & body tested to 15 kg/Sqcm.

CIDF 90° bend-1 No,CI flange tee-1 No,Blank flange-1 No,CI/MS Flange short piece 0.50 mtr-1 No,CI/MS Flange pipe1 mtr-1 No etc.(As per IS specification and certification registered) for constuction of delivery pipe line and wash out line.

Supply and Delivery Depth Gauge, 102 mm Dia with steel air brake pipe, required length with allover fittings and accessories for the work including supplying on the good quality hand pump of approved make. ( Make - H. Guru )

Supply and Delivery Pressure Gauge, 102 mm Dia and 7kg/cm2 range, brass cocks and fitting complete ( Make - H. Guru)

Heavy type 250 mm dia Split type Tube Well cover with 12 mm thick clamping arrangement including holes of Collumn pipe,Air pipe and cable entry with two sets heavy type suspension clamp,Nut,bolts and washer as per departmental design.

Increasing the existing TubeWell casing height upto a standard level as per direction of EIC.

For Dia of 250 mm.

Making brick piller 0.25X0.25X0.75 mtr or suitable height for supporting of valves and pipes with 12 mm thick plaster and net cement finish complete.

Anti snapping safety device for pump set by supplying suitable size or MS angle busket and nylon rope of required length including supplying of Nuts,bolts and all other materials.

Installation of above pump motor,valves and specials including supply of cable gland,sockets and power line connection in the existing panel,etc. including brick sand cement rod etc. as required to complete the job as per direction and upto the entire satisfaction of EIC.

Making Earthing arrangement

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below:By ISI-Medium GI pipe.

Extra for providing masonery enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below Ground level) complete with cemented brick work(1:6) of 25 cm width duly plastered with cement morter (inside) CI hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including drilling of 46 nos. 12 mm dia holes on the GI pipe.

Extra for treatment of soil by using salt & charcoal or coke for plate electrode.

Connecting the equipments body to earth busbar including S&F 20 mm x 3 mm galvanised (Hot Dip) MS flat on wall/floor with GI saddles as required and connection to equipments incl. drilling holes, with bolts, nuts, washers etc.

Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required length of Busbar is 0.5 mtr.

Laying of one No. cable upto 35 sqmm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed. For 3 Core X 10 Sqmm

Supplying & Fixing GI waterproof type looping cable box size 200x150x100 mm deep having 4 mm thick comprising of one 250V 15 A kit-kat fuse unit, one NL on porcelain insulator, one compression type brass cable gland for upto 2- core 16 sqmm PVC/A cable and having lined with rubber gasketted GI top cover with brass machine screws etc., earthing terminal with lug, on steel tubular pole near base, including S&F 40x6 mm thick, MS clamps with bolts, nuts etc. including painting with anticorrosive paint.

Making joint of the cable by supplying compression type gland,thimple,socket, etc as per requirement and as per direction of EIC.

Supplying the fixing rubber insertion for dust and vermin proof entry of 3 core 10 mm2 XLPE Al. Ar. Cable at Starter panel.

Internal Pump House Wiring :-

4 Core X 4 Sqmm, 1.1 KV Grade XLPE insulated Al.Ar Cable.( From PDB Panel feeder to DBs)(Make:-Approved Make) (From Kit-Kat Fuse to DB Box)

Supplying and fixing 240/415 Volt, 40 AMP, DP MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection

Supplying and fixing 2 Way MCB SS enclosure with IP-20/30 protection, powder coated provision for two MCB, concealed in wall after cutting the wall & mending good the damages to original finish incl. painting, connection & provision for earthing attachment

Supplying & Fixing GI Modular Switch Board of the following sizes complete with three no. suitable size Copper bar with holes (for Ph, N & E) fixed on bakelite/Hard Rubber insulator over the MS welded chairs incl. top cover flushed in wall for housing the board after cutting the brick wall incl. making earthing attachment, painting and mending good damages to building works. 8 Module

Supply & Fixing 240 V 6 A Modular type switch (Brand approved by EIC) on existing GI Modular type switch board having top cover plate and making necessary connections as required.

Supply & Fixing 240 V, 6A, 5 pin Modular type plug socket (Brand approved by EIC), without switch & plug top, on existing GI Modular type switch board with top cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supply & Fixing 240V, Modular Socket (2 Module) type fan regulator (Step type) (Brand approved by EIC) on existing Modular GI switch board with top cover plate incl. making necy. connections etc.

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required. 2 X 22/0.3(1.5 Sqmm)+1 X 22/0.3(1.5 Sqmm)ECC.

Supply & Delivery of 3 Blade 1200 mm Sweep ceiling fan, 220V-240V,50 Hz,AC.(Make:-Approved Make)

Supply & Delivery of 4 ft. long 22 Watt LED Tubelight Slim LED batten with aluminium housing and polycarbonate diffuser is an ideal replacement solution for existing battens/fluorescent lamps with elegantly designed end caps.(Make-Approved Make)

Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessary connection as required by 2x1.5 sqmm flexible copper wire.

Fixing only single/twin fluorescent light fitting complete with all accessories directly on wall/ceiling by screws etc.

Add GST @ 18%

Add CESS @ 1%

V P Concern (BID ID -7082643)

M/s. SOMA ENTERPRISE (BID ID -7052309)