Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹26.1 LAccepted-AOC 544 STREET NO 10 GHUMMAN NAGAR PATIALA 147001 PB | PATIALA | PATIALA | PUNJAB | 147001 | 1 | Accepted-AOC LOWEST AND REAOSNABLE | |
| 2 | 2₹26.8 L+₹66,550 (2.55%)Rejected-Finance | 2 | Rejected-Finance NOT LOWEST | |
| 3 | 3₹27.2 L+₹1.1 L (4.24%)Rejected-Finance | 3 | Rejected-Finance NOT LOWEST | |
| 4 | 4₹27.4 L+₹1.2 L (4.78%)Rejected-Finance | 4 | Rejected-Finance NOT LOWEST |
Tender Value
Refer Docs
EMD Value
₹50,000
Closing Date
12 Jun 2023, 6:00 pmClosed
MAJOR SANDEEP KUMAR
GE NORTH PATIALA MILITARY ENGINEER SERVICES SANGRUR ROAD PATIALA CANTT
REPAIR TO WALL FENCING, DRAINS GATES PATHS AND OTHER MISC ITEMS AT OLD CANTT PATIALA
2023_MES_595743_1
GE(N)/TOKEN-32/2023-24
Open Tender
Civil Works
Item Rate
180 days
PATIALA
AS PER NIT
8 documents required · 8 mandatory
₹500
GE NORTH PATIALA
₹50,000
Yes
5 Jul 2023
16 May 2023
14 Jun 2023
16 May 2023
12 Jun 2023
30 May 2023
Amount
Dismantling of post or struts (wood or steel or RCC) any section incl taking embeded portion and making good disturbed ground embeded in concrete complete all as specified and directed.
Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface complete all as specified and directed.
M/L PCC 1:4:8 using 40 mm graded stone aggregate as in foundation filling and mass concrete for fixing RCC/ any fencing posts complete all as specified and as directed
S&F MS angle as in iron posts and struts, gates, flat & round bars in fencing including cutting tops to shape as directed, drilling holes, notching for wire, bolting etc and similar works like MS flat iron fillets confirming to Fe-290 Gde E-165 complete all as specified and directed.
S/F TMT bars 10 mm dia and over, cut to length, bent to shape as required incl cracking bending hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia, complete all as specified and as directed
Dismantling fencing barbed wire of any description complete all as specified and directed.
S/F Galvanized 2 strand steel barbed wire 2.24 mm dia barbed wire with 2 mm dia barbs at 75 mm spacing straining, tightening and fixing to MS nibs embeded in pre cast RCC fencing post struds etc securing and typing as crossing with and provision of galvanized mild steel wire complete all as specified and as directed
Fixing only in repairs Galvanized 2 strand steel barbed wire 2.24 mm dia barbed wire with 2 mm dia barbs at 75 mm spacing straining, tightening and fixing to MS nibs embeded in pre cast RCC fencing post struds etc securing and typing as crossing with and provision of galvanized mild steel wire complete all as specified and as directed
S/F mild steel screw bolt 11 to 15 mm dia (machine made) with hexagonal head at one end and screwed the other, screwed end to be fitted with one washer and hexagonal nut length exc 10cm but not exc 15cm long complete all as specified and as directed.
Dismantling fencing wire mesh, any type and any size complete all as specified and as directed.
Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and as directed.
Supply only Chain link MS galvanisd fencing, any size or type, complete all as specified and directed.
Preparation of new steel surfaces any width or girth not otherwise described and applying two coats synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.
Preparation of old steel surfaces any width or girth not otherwise described and applying two coats synthetic enamel paint over a coat of red oxide primer complete complete all as specified and as directed.
Repairs to gates of any description and size including taking down and repairs to pintle hinges welding if required and bedding in brick or concrete work and check for its movement align the shutter by means of hammering / welding/oiling, lifting the shutter by means of pully or crane by taking safety measuers including replacement of pintle hinges complete all as specified and as directed.
Dismantling of brick work including all quoins arches pillars etc built in cement mortar complete all as specified and as directed.
M&L brick work with subclass B bricks, straight or curved on plan exc 6m mean radious built in CM 1:4 complete all as specified and as directed.
All as per but using old bricks obtained from item no 17, complete all as specified and directed.
Taking down cement plaster of any description on Brick Walls, concrete surfaces including racking out joints, hacking for key, scrubbing down with water, remove dust, debries/rubbish etc complete all as specified and as directed.
M & L for Rendering 15mm thick in cement mortar 1:4 on external faces or Brick walls or on concrete surfaces plastered surfaces finished even and smooth without using extra cement as per manufactare instruction complete all as specified and directed.
Supply only integral water proofing compound complete all as specified and directed.
M & L Preparing New Surfaces of Walls and applying two coats of cement base paint over a coat of alkali resistant primer, complete all as specified and directed.
M & L Preparing Old Surfaces of Walls and applying one coats of cement base paint , complete all as specified and directed.
M & L Providing cement concrete with type B0 1:2:4 using 12.5mm graded aggregate as in coping / kerb and the like including for use of form work (straight or curved) weathering slightly rounded or chamferred angles and throating complete all as specified and directed.
Demolition of cement conceret un-reinforcement in ground floor and paving n,exc 15 cm thickness complete all as specified and directed.
M & L for PCC with type D-2 1:4:8 (40 mm graded aggregate ) as in sub base, complete all as specified and directed.
M&L 50 mm thick cement concrete type B-I , 1:2:4 (20 mm graded aggregate) as in path ,floor all as specified.
M & L rubber moulded coloured chequered tiles 30 cmx30 cm x22 mm thick with grey cement and pigment , set jointed and pointed in neat cement slurry as in floor over 20 mm thick screed in cement mortar (1:4) pointed in matching colored polymer cement based grout to match complete all as specified and directed.
Providing and Laying Premium (1st) quality straight edge, ceramic tiles exterior grade WA value between 3% to 6% , flexural strength greater than 22N/mm², scratch resistance on mohs scale greater than 4 and crazing resistance of 2 cycles in 300x300x7 to 8 mm thick in floors etc. in any shade and design/pattern of light & dark tiles etc set & jointed in neat cement slurry & incl and over 20 mm thick screed in cement mortar (1:4) pointed in matching colored polymer cement based grout to match complete all as specified and directed.
M&L Machine pressed rubber moulded ISI marked precast cement concrete interlocking paver block any shape and size and of colour 50% coloured tiles and 50% grey coloured tiles confirming to IS-15658-2006 of 60mm thickness M-35 Grade complete all as specified and directed.
M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.
Machine made kerb stones, prepolished, rubber moulded in cement concrete 1:½:3 type A-1 using 20mm graded crushed stone aggregates, hydraulically pressed laid in trenches including necessary earth work in any type of soil including setting & jointing in cement mortar 1:4 complete all as specified and directed. NOTE: Shape of kerb stone shall be approved by the GE.
Dismantling brick laid beded and pointed in any mortar (laid flat or on edege) complete all as specified and directed.
M & L cement concrete 1:3:6 type C2 with 40 mm graded stone aggregate in surface channel and drain complete all as specified and directed.
M & L Bricks, sub class B, laid on edge in floors; old size bricks bedded and jointed in Cement mortar 1:6 and pointed in cement mortar complete all as specified and directed.
All as per item no. 35 here-in-above above but except bricks complete all as specified and directed.
M&L for Flush pointing to brick walls in cement mortar 1:3 complete all as specified and directed.
M&L for brick work with sub class 'B' brick old size straight & curved on plan to any radius in half brick thick wall built in CM 1:4 complete all as specified and directed.
Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement incl forms moulds stopped end complete all as specified and directed.
M & L for precast cement concrete type B0 1:2:4 using 12.5mm gr aggr set in CM 1:4 louvers and jallies 25mm thk (measured solid) incl all mouldings complete all as specified and directed.
AR CONSTRUCTIONS
KK BUILDERS
Nanotech Construction
stage.html
html • 0.05 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .