RESURFACING OF EXISTING ROADS INSIDE ARTILLERY CENTRE NASIK ROAD CAMP

Repairs to pot holes any depth n.exc 1 Sqm area each incl sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths etc cutting around edges to at least 25mm in depth, making good by filling in screened & graded road metal, watering and well ramming (including supply of road material) complete all as specified.

M&L for Premix bituminous macadam laid/rolled and compacted to required gradient and camber (consolidated thickness 75mm or less) with binder content (Paving bitumen of any penetration) of 4% by weight of total mix all as specified and directed

M&L for preparing existing black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally cleaning the surfaces with mechanical compressor to remove all loose dirt etc and providing and applying evenly a priming/tack coat with bituminous primer VG-10 at 5 kg per 10 sqm complete all as specified and directed.

M&L for preparing existing BM surfaces by brushing with wire brushes for removing caked mud etc. moistening the surface including cost and applying evenly a priming/tack coat using with bituminous primer of paving bitumen Vg - 10 at the rate of 2.5 Kg per 10 Sqm complete all as specified and directed.

M&L for premixed bituminous semi-dense asphaltic concrete 30 mm consolidated thickness with max 5% binder content, paving bitumen VG-30 grade by weight of total mix, rolled and compacted to required camber and gradient using 8 to 10 tonne power roller complete all as specified and directed.

M&L for preparation of road surface and applying thermoplastic reflective paint in white or any tint marking of min 2 mm thick single coat as in center line and edge line road marking of 100 mm width using ''HOT MARK" thermoplastic modern propelled road marking machine as directed incl all ingredients such as blinder, glass beads, Titanium dioxide calcium carbonate inter fillers thermoplastic requirement for glass beads shall be the Table No 650.4 of MORTH specifications incl spraying of glass beads etc all as per manufactures instructions and as directed

Supply and fixing in repair cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions all as specified and directed.

Supply and fix in repair solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/1600MA) consisting of super bright LED with 10,000 to 18,000 mcd complete as per manufacturers instructions etc all as specified and directed.

M & L Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering for road berms etc edges filling to level with surfaces complete all as specified and directed.