Providing and Fixing Roller blinds in Faculty Rooms at Level 3,4, Block C, A.C.C, Sector 12, PGIMER, Chandigarh

Providing and Fixing Zebra/ Roller Blinds of Specification of Sheer Dimout Blinds of approved makes having Roller Tube: Made up of High Strength Anodized Aluminium Alloy Extruded grooved tube. Size:40mm outside diameter, weight not less than 220gms/running recontrol Unit with Clutch Mechanism: The control unit is made of high strength reinforced plastic. The clutch is of wrap spring design. High carbon steel springs are provided to transmit motion from the driven mechanism Clutch is operated directionally by the use of beaded endless chain to raise and lower the blind smoothly to decide height. Idler: Idler is of high strength reinforced plastic, consisting of an outside sleeve and centre shaft. Sleeve provide bearing surface for centre shaft and rotate freely, providing smooth, quiet and long wearing operation. Round Type Bottom Rail: This is made up of high Strength aluminium alloy Extruded tube, White is powder coated in white. Size: not less than 14mm outside dia.; weight minimum =220gms/running mtr. Triangle type Bottom Rail: This is made up of high Strength aluminium alloy Extruded tube, which is powder coated in white Size not less than 15x24x24mm; Weight minimum 230 gms/running mtr.

Valance Rail: This is aluminium Extruded Rail made up of High Strength aluminium alloy, which is Powder Coated in White. Size: 84.5 mm Width; weight: minimum 320gms/running mtr. Ceiling Rail: This is aluminium Extruded Rail made up of High Strength aluminium alloy, which is Powder Coated in White. Size: not less than 75.6X12mm; weight= minimum 480gms/running mtr. Installation Bracket: It is made up of mild steel with white powder coating having minimum thickness of 1.8 mm.it is used for mounting control unit & idler. Ceiling Bracket: It is made up of mild steel with white powder coating having minimum thickness of 1.0 mm, issued to fix the blind to the wall or ceiling. Operating chain: This is made of 4.5 mm plastic beads molded on 2.0 mm thick polyester cord. The pitch of the beads is 6mm. The chain drives the sprocket fixed in the end control unit to close and open the blind. The pitch of the chain corresponds to the sprocket in perfect match for trouble free operation. End Cap: End cap for triangular bottom rail, round bottom rail, Ceiling rail and valance are made up of high strength molded plastic in white colour. Fabric: FR Grade (NFPA 701 :2015) 100% polyester, Fabric width 280 cm, Weight minimum 112 GSM +-5% minimum Thickness 0.30 mm+-5%Fabric Repeat size Solid 7.5 cm +- 5 % Mesh 5 CM +- 5 %. Note: Sample/ shade to be got approved from user Department & E.I.C.

Add 0.5% water charges