ADDN/ ALTRN AND IMPROVEMENT OF BUILDING NS-34 AND WATER PROOFING OF ROOF FOR NS-116, NS-36, NS-40 AND NS- 38 AT NSV, MO (MB) GHATKOPAR UNDER GE(NW) BHANDUP

Amount

Taking down eaves gutters and rain water pipes (any size or any pattern) including all fittings heads, shoes, bends swan necks etc including cleaning or refixing removal to storescomplete all as specifed and directed.

S&F 160mm bore PVC rain water pipe single socketed(ISI Marked) any length with rubber ring joints , complete fittings etc fixed to wall fixed with MS clamps8mm dia with two nuts wall nails etc complete all as specifed and directed.

Taking up or down steel tubing and connection, removing clear off site after credit for the same is recovered by the dept., bore of pipe 15mm complete all as specified and directed.

Taking up or down steel tubing and connection, removing clear off site after credit for the same is recovered by the dept., bore of pipe 20mm complete all as specified and directed.

S&F 15mm bore U-PVC pipes of pressure rating 10kg/cm 2 fixed complete to walls, ceiling or in floor etc. with all fittings complete all as specified and directed.

S&F 20mm bore U-PVC pipes of pressure rating 10kg/cm 2 fixed complete to walls, ceiling or in floor etc. with all fittings complete all as specified and directed.

S&F in repair for gun metal globe or gate valves with iron wheel head , screwed both ends for iron pipe & fixed of size 40 mm bore complete all as specified and directed.

S&F in repair for gun metal globe or gate valves with iron wheel head , screwed both ends for iron pipe & fixed of size 25 mm bore complete all as specified and directed.

Chipping, removing carefully loose/damaged concrete including plastering (total thickness exceeding 40mm but not exceeding 60mm ) from surfaces of RCC members, in any location by low impact Hammer/Breakar without damaging the structure & cleaning the surfaces with wire brush etc and disposal of debris out side MOD land complete all as specified and directed. Note : 1) Hard concrete shall not be removed by force

M&L for cleaning existing reinforcement with wire/ rotary wire brush to a shining bright finish, making the surfaces free from loose material, dirt etc complete and applying two coats of alkaline rust converting primer conforming to ASTM-B-117 of approved make on rebars with time interval of 1 hour between the coats, complete all as specified and directed. (Note :- Mode of measurement: superficial area of concrete will be measured.)

M&L for carry out application of ‘Bi-polar migratory corrosion inhibitor'of approved make on RCC surfaces, complete all as specified and directed. (Note :- Mode of measurement: superficial area of concrete will be measured.)

M&L for Anticorrosive Treatment to Reinforcement using IPNET-RB of of approved make by application on exposed reinforcement in two coats with time interval of minimum 4 hours between each coat. The application shall be done by brush after cleaning/wire brushing to the exposed steel surfaces complete all as specified and directed . Note :- Mode of measurement: superficial area of concrete will be measured.

M&L for Epoxy bond coat of of approved make as approved by GE over exposed concrete surfaces prior to application of any type of mortar / concrete to ensure bond between old concrete & new concrete/ new mortar by brush application, complete all as specified and directed.

M&L for providing Polymer Bonding Agent of of approved make as approved by the GE followed by flexible polymer based putty ( 1cement: 1.2 finesand :20% polymer by weight of cement : water as required ) on cracks after cutting the cracks to a 'V' shaped groove upto 10 mm wide and 10 mm deep in structural RCC members , finished with spatula etc. complete all as specified and directed.

M&L for casting & repairing of excessively damaged distressed RCC members (exceeding 60mm in thickness) with prebatched, prepacked,single component ready to use microconcrete from of approved make as appoved by GE, at any level/height and at any lead or lift as directed including prefabricated water tight formwork, centering, scaffolding, also including mixing, laying, levelling, finishing, curing etc as per manufacturers specifications and all other relevant works, complete all as specified and directed. Note : Reinforcement only shall be measured and paid separately) (Note : Reinforcement only shall be measured and paid separately).

M&L for building up the profile of structural members using polymer modified mortar from of approved make, while the bonding agent is still tacking upto 20mm thickness, including levelling, profiling etc, complete all as specified and directed.

M&L for building up the profile of structural members using polymer modified mortar of approved make exceeding 20mm thick and not exceeding 40mm thick in two layers, each of equal thickness including levelling, profilling etc, complete all as specified and directed.

M & L for Cutting out bricks ,forming toothing for and bonding new into old work including value of new materials entering old walls and jointing and pointing (measured on verticle face in contact with old wall only )complete all as specifed and directed.

FILLING AND REINSTATING OF SEPERATION CRACKS:- Opening the seperation cracks at the junction of RCC and masonry whereever directed and instruted into V grroves 2" to 3" from either side of the cracks by carefully making the areas to be opened up using a cutting machine and skilfully/ carefully chiselling with a well sharpened chisel and hammer as directed including wire brushing and washing of concrete substrata and masonry walls with water jet to the surfaces thus prepared to the entire satisfaction of the consultant complete all as specifed and directed.

M&L for Moistening the cracks , providing and applying priming/bonding coat of slurry made out of " Polvalk EP" and cement ( or equivalent as specified in the list of brand names) in proportion 1:1 to surfaces prepared as instructed and directed.Filling the cracks /grooves by providing and applying "Polvalk EP" polymer modified cement mortar (or equivalent as specified in the list of brand names ) in proportion of 1:5:15( Polyalk EP:Cement:Graded sand/quartz sand) on the prepared surfaces and finishing it in level with the existing plaster including hand packing, curing and making the surface similar to external plastering using wooden floats/ punch etc complete all as specified and directed.

M&L for Drilling holes of required size upto 16mm diameter and 50mm depth in concrete and cleaning the same complete all as specifed and directed.

M&L for Providing and fixing 12mm diameter aluminium/ PVC injection nipples and securing the same as directed & providing and injecting cementitious grout using CEBEX 112 additive of Fosroc at the rate of 225 grams per bag of cement and using suitable mechanical gun/ pump including mixing etccomplete all as specifed and directed.

M&L for Providing & fixing epoxy dipped shear keys of 10mm dia and 4" to 6" length in columns before jacketing, Micro concreting as per Consultants Instructions and directions. complete all as specifed and directed.

M&L for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of and colour having tensile strength of 550 Mpa as in roof covering/ chajjas (one side half circle crank ), fixed with self tapping screws complete all as specified and directed.

S&F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes confirming to IS 1161-1979complete all as specifed and directed.

S&F Mild steel work of Angles, bars, flats etc., as in supports for stiffening of fencing, wall ties, mild steel frame work for bird proofing fixing of XPM jalli, (Beam, Angle, Channel, Plates or flat section etc), distance pieces, cleats, bracing, etc, of grade E-250, Fe-410W, quality 'B' including welding, complete all as specified and directed.

Dismantling of roof terracing cement / brick concrete (un-reinforced) and existing water proofing treatment of any thickness in any position and of any portion from top of roof of building, cleaning surface of roof with wire brush / mechanical brush and with water thoroughly to remove all dust / dirt and loose particles to expose base concrete roof slab and removal of rubbish / demolished material out of MD land complete all as specified.

M&L for PCC 1:2:4 Type B0 using 12.5 mm graded aggregate with 2% by weight of cement or as per manufacturer's instructions water proofing as in levelling course, haunching, coping and similar works over RCC roof surface and RCC over head tank top surface including rounded or chamferred on edges and formwork etc all as specified and directed.

"Supply and Application of 4 Layer SHR Waterproofing Coating System as per manufacturer application procedure on leaking concrete WALL surface by thorough surface preparation with high pressure water jet min. 125 bars, opening the cracks, followed by one absorption coat of nano-tech enhanced elastomeric waterproofing (NEEWP) emulsion having UV resistance and min. 50% solids, filling and sealing the cracks, then over coating with 2 Coats of NEEWP + Cement mixture as waterproofing coat having +450% Elongation followed by curing and then top-coated with 1 protective coat of SHR Coating - pure acrylic based, UV resistant, non-yellowing, bio-organism resistant (anti-fungal, anti-bacterial) conforming to BIS STD IS 17218:2019 with Pull off Adhesion 2.8 Mpa, passes 2000 hrs accelerated durability test, suitable for all types of cementitious surfaces, white colour, matt, surface coverage 3.25 SQM/Ltr/2 Coats, DFT 100 - 120 microns using brush, roller, airless spray gun as applicable. The product should be certified by NABL Approved Lab and application is to be done by company approved applicator only" upon drying on projected cupboard area. complete all as specifed and directed.

Supply and application of 7 layer SHR Water proofing coating system on leaking concrete surface by through surface preperation ,opening of cracks , followed by one absorption coat of thermacool WP51, nano modified, UV resistant elastomeric clear coat having min 50% solids, filling of cracks, then over coating with sandwich coat of elastomeric (Thermacool WP51 +Cement) water proofing layer with 80 GSM non-woven fibre mesh, application of 3rd coat of elastomeric water proofing layer having + 450% elongation, tensile strength min 2.2 MPa and then top coated with two coats of thermacool 0.3c pure acrylic based UV resistant, non yellowing bio organism resistant ( antifungal, anti bacterial) solar reflective coating confirming to BIS STD IS 17218:2019 with pull off adhesion 2.8 MPa , passes 20 HRS accelerated durability test , suitable for all types of cementitious surfaces, white colour, matt, surface coverage 3.25 sqm/ Ltr/ 2 coat, DFT 100-120 microns using brush, roller, arless spray gun as applicable. or equivalent make and their guidelines of similar product like "Heataway" from Dr.Fixit/ "Smart care damp proof " from Asian Paints/or any other approved make. Or equivalent authorised applicator with 10 year guarantee

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out soft/ loose soil complete all as specified

M&L for Plain Cement concrete type D2 1:4:8 (40mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specifed and directed.

M & L for Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specifed and directed.

Removing excavated material / soil to a distance n. exc 50 m above starting point complete all as specified and directed.

M&L for Removing excavated material exc. 1.50 km but n exc. 5 km and depositing where directed complete all as specifed and directed.

M&L for RCC type B1 1:1.5:3 (using 20mm graded aggregate) Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles

M&L for RCC type B1 1:1.5:3 (using 20mm graded aggregate) Columns, pillars, piers, posts and struts complete all as specified and as directed

M&L for RCC type B1 1:1.5:3 (using 20mm graded aggregate) Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed

M&L for Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface

M&L for 100mm thick Cement concrete type B-1, 1:2:4 (20mm graded aggregate) as in flooring complete all as specified

M & L for TMT steel bars 10 mm dia and over, cut to n length , bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or resecuring with clips complete all as specified

All as per item above but 5mm dia and over upto and including in stirrups, spacers and binders complete all as specified

S&F aluminium section in doors/windows/ventilators ,kitchen cupboards, built n almirah doors any type, powder coated in approved colour (Thickness of powder coating not less than 50 micron), aluminium section (medium weight of series 'B') or section as directed by Engineer-in-Charge, cut to size, jointed together with cadmium plated steel screws including rubber beading or gasket for aluminium sections for fixing glass/XPM jali or for fixing bakelite sheet and all necessary fittings complete, screws, plugs for fixing screws, etc all as specified and directed of approved make Notes : (i) Weight of aluminium sections shall only be measured. (ii) The supply only rate of bakelite sheet glass pane,wire mesh and rubber beading or gasket will be measured separately.

Supply only 4mm thick figured glass/pin headed type ordinary quality fixed in aluminium ventilator n exc 0.50 Sqm each pane all as specified & as directed

Supply only Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples fixed in aluminium windows/wooden doors complete all as specified and directed.

S&F stainless steel butt hinges 125mm size medium wt coIled rolled complete all as specified and directed.

S&F anodised aluminium extruded handles 150 mm size complete all as specified and directed.

S&F aluminium anodised barrel tower bolts of extruded section 200 mm size complete all as specified and directed..

S&F aluminium alloy, anodised sliding door bolt 300 mm long with hasp, staple (bolt type) and fixing clip of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed..

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails . MS frame shall be covered with heat moulded plain colour PVC 'C" channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVc sheets for top rail , lock rail & bottom rail on either side & as gap insert for top rail & bottom rail , panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVc sheet beading and joined together with solvent cement ,supplying & fixing in the frame at site as per specification and directed by Engineer-in-charge.

S&F solid PVC Door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S square tube supplying & fixing in opening as per specification and directed by Engineer-in-charge.

M&L precast cement concrete block masonry in PCC 1:3:6 type C1 with solid block exc 10cm in width and setting in CM 1:6 complete all as specified and as directed.

M&L for brick work with sub-class 'B' bricks, straight, or curved on plan to any radius as in half brick thick wall in CM 1:4 complete all as specified and directed.

M&L for rendering 10 mm thick on fair faces of brick work in CM 1:6 and 5mm thick in CM 1:4 including water proofing compound, finishing even and smooth without using extra cement. (WPC shall be measured and paid separately)

M&L for plastering in CM 1:6, 10 mm thick on walls finished even and smooth w/o using extra cement.

M&L for plastering in CM 1:3 , 5mm thick on ceiling finished even and smooth without using extra cement

M&L for preparation of new plastered surfaces of ceiling and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed

M & L for preparation of new plastered surfaces of walls and applying Two coat of oil bound distemper over a coat of primer complete all as specified and directed.

M&L for two coats of antifungal paint of approved makeover a coat of exterior primer on newly prepared plastered external surfaces and including scaffoldings and cradle including hoisting and lowering as required with bracing, support complete all as specified and directed by Eng-in-Charge

M&L for Non-skid ceramic tiles (Coloured) 7 to 8mm thick rectangular area of each tiles exc 0.06 sqm n exc 0.11 sqm in floors etc,.set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:4 laying floor finished complete all as specified and directed

M&L for glazed ceramic coloured tiles 450x300mmx7mm thick in vertical surfaces such as skirting/dado and risers to steps and including over 10mm thick rendering in CM 1:3 on fair faces of brick/concrete surfaces as in backing coat for tiles. etc, all as specified and directed.

M&L for GREs tough HD polished ceramic tiles 10mm/11mm (light shade of square/ rectangular) , area of each tiles not exc 0.72 sqm in floors etc,.set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6 laying floor finished complete all as specified and directed.

M&L for GREs tough HD polished ceramic tiles 10mm (light shade of square/ rectangular) polished, area of each tiles not exc 0.36 sqm in walls skirting etc,.set and jointed in neat cement slurry and pointed in white or coloured cement to match including over 10mm thick rendering in CM 1:4 on fair faces of brick/concrete surfaces as in backing coat for tiles.complete all as specified and directed.

M&L for rounding to edges of stone slab one edge , such as in steps , cooking paltforms , and similar situations complete all as specifed and directed.

S&F white oval counter top wash basin of size 56 x 41cm including waste coupling complete all as specified.

S & F Brass CP health faucet with 8mm Dia 1.2 Meter Long Flexible Tube and Wall Hook screwecd for iron pipe fancy type long body all as specified and directed.

S&F in repair fancy type chromium plated brass angle valve type suitable for 15mm bore pipe complete all as specified.

S&F in repairs Vitreous China counter top Oval type coloured wash basin suitable size (609.6mm x 406.4mm x 152.40mm) including pillar taps with bottle trap but including waste pipe fixing on counter with stainless steel brackets complete all as specified

S&F in repairs Brass chromium plated moca wall mixer 3 in 1 fusion , 15mm for mixing hot & cold water screwd down three joints to steel pipes or unions and plugging and screwed to walls complete all as specified and directed.

S&F in repair fancy type brass chromium plated toilet paper holder complete all as specified and directed.

S & F in repair fancy type 150mm size square brass CP shower rose complete all as specified and directed.

S&F in repairs 15 mm dia bib tap fancy type chromium plated with flange quarter turn complete all as specified as directed.

S&F in repair fancy type 15mm dia brass chromium plated mixer for mixing hot and cold water screwed down for iron pipe and fixed to WHB including taking out existing mixer from old WHB complete all as specified and directed.

S&F in repair fancy type chromium plated brass two way bib cock suitable for 15mm bore pipe complete all as specified and directed.

S&F stainless steel of AE - SI 316 grade tubular towel ring including apair of CP brass bracket complete all as specified and directed.

S&F in repairs 15mm bore PVC connections, with PTMT nuts of length 450mm complete all as specified and directed.

S&F in repair fancy type brass chromium plated soap dish of 160x160x90 mm complete all as specified and directed.

S&Fin repair fancy type stainless steel towel rack size 600mm X 300mm including apair of brass bracket complete all as specified & directed by Engr in charge.

S&F chromium plated brass tubular towel rail 20 mm dia, D type for wash hand basin centre holed fixed to iron pipe complete all as specified and directed.

S & F in repair fancy type sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with CP bracket gaurd and railling 60 cm long complete all as specified and directed.

S&F in repair fancy type glass corner 300mm radius of 10mm thick toughned glass with CP railing fixed with screws fancy type complete all as specified and directed.

S & F Brass CP Hand Shower with 8mm Dia 1.2 Meter Long Flexible Tube and Wall Hook screwecd for iron pipe fancy type long body complete all as specified and directed.

S & F PTMT alloy toilet cabinet with mirror of overall size 350 x 450mm and fixed to wall complete all as specified and directed.

S&F Stainless steel Curtain Rod 20mm dia of approved quality with two number decorative design as approved brackets fixed in brick/concrete wall and same finished knobs on each end of curtain rod complete all as specified and directed.

S & F in repairs Rimless Single piece-WC with UF soft close seat cover, Hinges, Fixing Accessories, Accessories Set and Cistern fittings,Size: 360x675x750 mm, S Trap-300 mm of approived make including making good to floor complete all as specified and directed.

S&F 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified

S&F SWR bends 110 mm dia of any radius with access door complete all as specifed and directed.

S&F PVC SWR 75 mm dia single (Single T) equal of unequal complete all as specifed and directed.

S&F 50mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specifed and directed.

S&F 75mm bore PVC (SWR) pipe single socketed(ISI Marked) any length with rubber ring joints , complete fittings etc fixed to wall fixed with MS clamps8mm dia with two nuts wall nails etc complete all as specifed and directed.

S&F 110mm bore PVC (SWR) pipe single socketed(ISI Marked) any length with rubber ring joints , complete fittings etc fixed to wall fixed with MS clamps8mm dia with two nuts wall nails etc complete all as specifed and directed.

S&F CPVC pipe 150 mm bore SDR 11and plain CPVC SDR 11 fittings fixed complete to walls, ceilings or in floors etc, complete all as specified and directed.

All as per item above but 20 mm bore etc, complete all as specified and directed.

S&F 50mm ALFA (Continues density panel -Roof profile)puf panel of standard density 38-40 kg/m3 (+-4)with top sheet and bottom sheet TCT colour coated galvanized sheet insulation core -thick supply of double skin PUF insulated sandwich roof panel having 50mm core with PPGI RMP trapezoidal in of make JSW / TATA Blue scope or equivalent micro ribbed linear panel in bottom skin make JSW and TATA Blue scope equivalent . The PUF panel shall be CFC free and zero ozone depleting panel using N pentane blowing agent & made out of continuous line running on uninterrupted power supply.Panel shall have pre coated galvanized sheeton both side of polyurethane form confirming to IS 12436:1988.The pre coated sheet shall be of minimum 240 to 550 MPa.The PPGI sheet shall have plastic protective guard film of minimum 25 microns to avoid scratches during transportation.The PUR foam shall be self extinguishing, fire retardant type having minimum standard density of 38-40 kg/Cum (+,-4Kgs) and fixed with self tapping screws of suitable length in roof including in mid side end cap and necessary scaffolding etc complete all as specified and directed.

S&F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes confirming to IS 1161-1979 complete all as specifed and directed.

M&L for Reinforced concrete pipes class NP 2 of 150 mm dia laid and jointed complete with collars complete all as specifed and directed.

Supply and fixing in trenches for suction pipe jointing GI tubing medium grade 25 mm dia including all fittings such as bends elbows tees union short pieces connectors check nuts caps plugs etc for the sizes complete all as specified and directed. Note : Excavation and earth work will be measured and paid seperately under relevent items.

Supply and fix in repairs gun metal gate valve with iron wheel head screwed both ends for iron pipe for 25 mm complete all as specified and directed.

M&L for drilling and taping cast iron water mains (in position) for branch connection of the internal dia 25 mm complete all as specified and directed

M & L for concealed point wiring complete with proper colour coding using, 1100 Volts grade, 1.5 Sqmm, PVC insulated FRLS, unsheathed wire with multi stranded copper conductor confirming to IS-694, Part II, ISI marked drawn in and including PVC conduit (minimum 20mm dia) concealed in wall etc (also including cutting chiseling in wall and making good the same in CM 1:3 to match with the adjoining surfaces) with all accessories, fittings, PVC junction boxes etc, also including 1.5 Sqmm, PVC insulated, FRLS, unsheathed, 1100 Volts multistranded copper conductor green colour as continuous earth wire connected to common earth dolly all as specified and directed for one light point /fan/bell point controlled by one one way switch, complete all as specified and directed. Note: Modular flush box and inner/outer plates measured and paid separately.

All as per item No.101 above but for One 2pin/3 pin socket outlet 5 Amps on independent board.

All as per item No.101 above but for One 2pin/3 pin socket outlet 5 Amps on same board with other switches , complete all as specified and directed.

M&L for point wiring with 2.5 sqmm single core PVC insulated unsheathed multistranded copper conductor FRLS with and in and including PVC concealed conduit having thickness not less than 2 mm with all fittings including 2.5 sqmm single core PVC insulated unsheathed multistranded copper conductor FRLS as earth continuity conductor connected to common earth dolly.and including cutting chiseling for concealed piping and making good disturbed surface area and white wash/colour wash to matching existing colour and all as specified . Note: colour coding is to be maintained .(Ph-Red, N-Black, Half-Yellow, Earth- Green) Note: Modular flush box and inner/outer plates measured and paid separately.

Material and labour in repairs for point wiring complete with 4 sqmm PVC insulated unsheathed 1100 volts grade cable stranded copper conductor single core drawn through and including concealed on rigid PVC conduit and conduit accessories of 20/25 mm complete with sunk iron pressed steel terminal box concealed in wall for fitting mounting switch/ sockets regulators etc with laminated sheet 3 mm thick cover and with 4 sqmm PVC insulated copper conductor earth wire and connected to earth dolly for one15 Amp socket point for connecting water coolers/ AC/Gysers etc.

M&L for submain wiring in and including steel conduit having thickness 2 mm, 25 mm dia with two run of PVC insulated, sheathed multistranded copper conductor of 6 sqmm(FRLS) and one run of PVC insulated, sheathed multistranded copper conductor 6 sqmm (green in color) for earth continuity conductor and connected to common earth dolly with thimble etc, cutting chiseling for concealed piping and making good the disturbed surface area white wash/colour wash to matching with existing colour complete all as specified and directed.. (Note: Two run of 6 sqmm plus one run 6 sqmm of earth wire will be measured as 1RM) including dismantling of existing unserviceable submain wiring all as specified and directed. Note: colour coding is to be maintained .(Ph-Red, N-Black, Half -Yellow, Earth- Green)

M&L for ceiling rose three terminals AC 240 volts 50Hz complete all as specified and directed.

M&L for switch modular one way 6/5 amps 1 module complete all as specified and directed.

M&L for switch modular one way 16/20 amps 1 module complete all as specified and directed.

M&L for socket modular 6Amp 2/3 pin combined 2 module complete all as specified and directed.

M&L for socket modular 16/20 Amp 2/3 pin combined 2 module complete all as specified and directed.

Supply and fixing bell ding dong 240 volt Ac 50Hz complete all as specified and directed.

M&L modular bell push 6Amp 1 module complete all as specified and directed.

Supply and fix in repairs sheet metal enclosure powder painted for MCB DB SPN 8 way double door with din rail and 200 Amp bus bar complete all as specified and directed.

Supply and fix in repairs MCB SP 240 Volts 6 to 32 Amps breaking capacity 10 KA,B Curve rating complete all as specified and directed

Supply and fix in repairs MCB SPN 240 Volts 6 to 32 Amps breaking capacity 10 KA,B Curve rating complete all as specified and directed.

Supply and fixing modular metal flush box 1/2 module complete all as specified and directed.

Supply and fixing modular metal flush box 3 module complete all as specified and directed.

Supply and fixing modular metal flush box 8 module complete all as specified and directed.

Supply and fixing modular white cover plate with frame 1/2 module complete all as specified and directed.

Supply and fixing modular white cover plate with frame 3 module complete all as specified and directed.

Supply and fixing modular white cover plate with frame 8 module complete all as specified and directed.

Material and Labour for tube light fitting LED 20 watt with decorative end caps made out of CRCA sheet powder coated complete with housing with aluminium heat sink on back of leds ,power factor >0.9,having inbuilt surge protection device for overvoltage protection with all accessories prewired and making connection with 3 core copper flexible cable of size 23/.0076 from ceiling rose/PVC connector to light fitting and shall be fitted on new plastic square/round block complete all as per specified and directed.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) without remote complete all as per specified and directed

Supply and fix exhaust fan, steel body AC single Phase. 230V of size upto 300mm sweep with, blades, and frame complete all as specified and directed

Supply and fix in repairs instant water heater,equipped with superior grade stainless steel corrosion free body,Anode rod protection and heating element 3 KW capacity 3 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection pieces hot and cold etc. complete all as specified and directed.

Deduct Credit for Demolished/ Dismantled material Rs. (-) 4550.00 (Minus) as listed in Schedule of Credit Note1: Tenderers will not quote against this item being a tentative amount to be considered to arrive at the 'Contract Sum' Note 2:- The tenderer must keep in mind when quoting rates against items out in multiple store house having height 4 mts to 7 mts. Necessary scaffolding and saftey measures required during execution of work are including in this items.

R J ENTERPRISES (BID ID -3158427)

Advait Enterprises (BID ID -3164613)