PROVN OF SOUND PROOFING OF ALL IOS ROOM AND UPGRADATION AND IMPROVEMENT OF B/R FITTINGS / FIXTURE AT BLDG NO. P-5/1 and P-5/2 AT 4 AFSB UNDER GE AF GORAKHPUR.

Amount

Dismantling the AC (corrugated or semi corrugated) / fibre glass translucent sheet form the roof coverings etc complete all as specified and directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steels having 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding towall, fixed with self tapping screws complete all as specified and directed.

Demolition of brick work built in cement mortar incl all quoins, arches pillars etc but excluding ashlar facings etc. complete all as specified and directed.

Excavating in trenches not exc 1.5m wide and n.exc 1.5 m in depth, for foundations, laying of pipes etc and getting out in soft/loose soil complete all as specified & directed.

M&L for brick work with sub class 'B' bricks, straight or curved on plan exc 6m mean radius built in cm 1:6 complete all as specified and directed. Note-Brick work and plastering will be done by coarse sand only.

M&L For Brick work with sub class B’ bricks, straigh tor curved on plan to any radius in half brick thick honey comb walls masonary , built in CM 1:4 complete all as specified. Note-Brick work and plastering will be done by coarse sand only.

M&L for rendering 15mm thick cement plaster on fair faces of brick work of drain wall or concrete surfaces in CM (1:4), finished the surface even and smooth without using extra cement complete all as specified and directed. Note-Brick work and plastering will be done by coarse sand only.

M&L for preparation of new plaster surfaces of wall and applying two coats of weather coats with exterior emulsion Apex paints over a coat of exterior grade water proof wall care putty 1mm thick and a coat of white cement primer complete all as specified and directed.

Excavation in post holes (or similar holes ) each n.exc 0.5 cum in each getting out soft /loose soil coplete all as specified and directed .

M & L for PCC (1 : 4 : 8) Type D2 ( 40 mm graded crushed stone aggregsate) as in lean concrete of foundation and mass concrete complete all as specified.

M & L for PCC 1:2:4 type B-O (12.5 mm graded crushed stone aggregsate) in lintels upto 1.5 m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses,lacing courses, parapets and railings upto 60 cm in height, kneelers, apex stones, bed plates, water troughs and the like including weathering , slightly rounded or chamfered angles and throating, complete all as specified.

S & F Hand rails, half round or othe steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc. flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc. and similar work conforming to Fe-290 Gde E-165 complete all as specified.

S&F mild steel screw bolt (machine made) with hexagonal at one ends and screwed the other ends, each screwed ends to be fitted with washer and one hexagonal nuts, size of bolt 12mm dia and length of bolt exc 5cm but nexc 10cm long. (from under side of head to the end in 75mm) complete all as specified and directed.

Supply only chain-link fencing fabric of galvanised steel wire, mesh size 75 mm × 75 mm, fabricated from suitably gauged wire, supplied in required height and length, including securing arrangement with mild-steel flat strips, straining bolts and other necessary fittings, complete all as specified. ( weight of chain link shall be decided through a B.O.O)

Fixing only chain link fencing including line wires, and mesh size type to any type of standard, rail straining bolts etc including binding, provission of binding wire complete all as specified.

M & L for two coat of synthetic enamel paint over one coat of red oxide primer on new steel surface incl preparation of new surface of area exc. 10 cm width or girth incl complete all as directed.

S & F mild steel work in framed work as in doors or gates of angle or other sections, with gusset plates, rails, braces, etc., complete drilled for fixing of steel sheeting or other covering doors etc, to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel, sheeting or other covering, running rails and guides) and hanging also fastening and fixing complete conforming to Gde Fe 290(Gde E-165) complete all as specified.

S&F MS work in truses / purlin rafter post plate etc including ERW or induction butt welded tube conforming to IS-1161-1979 Gde S-240 complete all as specified.

S&F framed work as in gusset plate for framed truss, rafters, rails braces etc complete, drilling for fixing of steel sheeting or other covering, door etc to be prepared for hanging or sliding with and including either hook and hinges or steel hanging door fitting etc of Fe-410 Gde 250A complete all as specified.

S&F ornamental and intricate disign Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted,or forged into spikes, framed guard bars, barred iron doors, ladders; framed balusters; walk ways, railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 and hung as gates including pintel hinge stops hand made sliding bolt etc complete all as specified.

M&L PCC (1:4:8), type D-2 (using 40mm graded stone aggregate) as in sub base 75mm thick complete all as specified and directed.

M&L for sand cushion for paver block, including spreading, levelling, watering and compacting to required gradient and camber, complete all as specified and directed.

M&L for 60 mm thk PCC M-35 machine pressed rubber moulded coloured interlocking pavor block any shape and size confirming to IS 15658-2006 using white cement with lakour finish complete all as specified and directed.

M&L for chequered cement concrete tiles 25 cm × 25 cm × 22 mm thick, set, jointed and pointed in neat cement slurry in floors, including 15 mm thick screed bed in cement mortar (1:6), complete all as specified and directed.

M&L for preparation of old surfaces by complete removal of existing treatment and applying two coats of weather coats exterior emulsion paints (Apex) over a coat of exterior grade water proof BIRLA/JK wall care putty 2 mm thick over a coat of white cement primer complete all as specified and directed.

S&F in repair stainless steel kitchen sink with drainage board of overall size 915 mm × 460 mm and bowl size 410 mm × 330 mm × 160 mm, 1 mm thick, complete with plug, washers and waste fittings, including bedding in cement mortar to dwarf wall or fixing on cantilever brackets, and connecting union to waste pipe, complete all as specified and directed.

S&F 1 mm thick high-quality stainless steel (SS-304 grade) kitchen plate rack 750 x 900 mm ( Weight not less than 7 Kg / Each) including all necessary brackets, screws and fixing accessories required for proper installation on wall. all as specified and as directed.

S & F 18 mm thick PVC sheet minimum 600 Kg density grade 1 quality of both side plain white colour rigid and glossy finish fixed with screws, solvent cement/adhesive as per manufacturer instructions to make kitchen cabinet/ cupboard sides, top and bottom and shelves inside complete all as specified and directed. Note:- Kitchen cabinet/cupboard accessories like handle, hinges etc will be measured and paid separately.

S & F 18 mm thick PVC sheet minimum 600 Kg density grade 1 quality one side decorative lamination and other side plain white colour to make kitchen cabinet/drawer/cupboard shutters fixed with screws, solvent cement/adhesive as per manufacturer instructions to make kitchen cabinet sides, top and bottom and shelves inside complete all as specified and directed. Note:- (a) Kitchen cabinet accessories like handle, hinges etc will be measured and paid separately under respective S&F items. (b) Colour and design of prelaminated board shall be approved by GE prior to execution.

S & F 15mm dia and 350mm ling auto closing hydraulic (soft closing) chrome finish stainless steel hinge openable at 110 degree all as specified and directed.

S & F 100 mm long stainless steel (grades-304) handle fancy type polished bright chrome finish complete all as specified and directed.

Taking down chowkhats or frame (with shuuter w/o taking of shutter from frame exc 1.5 sqmtr but n.exc 4 sq m each.) complete all as specified.

Supply and fixing factory made UPVC white colour three track panels sliding window with fly proof stainless steel wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of frame 110x 45mm & sash 40 x 62 mm both having wall thickness of 2.3 + 0.2 mm and single glazing bead/double glazing bead of approproate dimension comprising of UPVC multi chambered frame. with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 + 0.2 mm thick galanized mild steelsectin made form roll forming process of required length ( shape & size according to UPVC profile) , appropriate dimension of UPVC extruded glazing beads and UPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy ( white powder coated) touch locks with hook , zinc alloy body with single nylon rollers (weight bearin capacity to be 40 kg) G.I fasteners 100x 8 mm size for fixing frame to finished wall and necessry stainless steel screws etc. Profile frame & sash sall be mitred cut and fusion weled at al corners, including drilling of holes for fixong hardwares and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality. complete all as specified and directed by Engineer- in Charge complte all as specified and directed. Note -1. Glazed shutters float glass thickness not less than 5.00 mm and wiremes shutter with Stainless steel wire mesh 0.36 mm dia with aparture 1.4 mm shall also be deemed included in quoted rates and No extra payment will be made separately. 2. for UPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

Supply, fixing in position pre painted wall paneling of acoustical channeled wood works perforated panels of width 128 mm, thickness of 15mm and length 2440 mm or as required, made of a high density fibre board with minimum 830 kg/ cubic meter density substrate with wood veneer as per the approved shade/ species & finish and a melamine balancing layer on the reverse side. The boards shall have a special perforation pattern where the visible surface has a “Helmholtz” fluted perforation of 2mm width and 14mm of visible panel each. The panels shall have fire reaction class of 1 as per BS 476 Part 7. The edges of the panels shall be :tongue-and-grooved” to receive special clips for installation. The back of the perforated panel shall have sound absorbing non-woven acoustical fleece having NRC of 0.55. The panels shall be mounted on special aluminum anodized splines using clips as approved by GE. Note :- (i) Panels shall be G14 channeled WW of Armstrong or equivalent brand of manufacturer’s particular specification’s. (ii) Aluminium accessories like aluminium keel, clips, corner, transition profile etc shall be of same make of panels. (iii) Work shall be executed by the manufacturer’s authorized Vendor. (iv) Rate inclusive taking down and refixing of all B/R & E/M fittings and fixtures if required.

Shiva Builders (BID ID -3488104)

MATRUBHOOMI ENTERPRISES (BID ID -3488559)

M/s Ishwarchand Traders (BID ID -3491499)

PANDEY TRADERS (BID ID -3496130)