Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹9.0 LAccepted-AOC | L1 | Accepted-AOC REASONABLE | |
| 2 | L2₹9.5 L+₹49,211 (5.45%)Rejected-Finance | L2 | Rejected-Finance HIGH RATE | |
| 3 | L3₹9.9 L+₹83,906 (9.30%)Rejected-Finance | L3 | Rejected-Finance HIGH RATE | |
| 4 | L4₹10.0 L+₹1.0 L (11.1%)Rejected-Finance | L4 | Rejected-Finance HIGH RATE | |
| 5 | L5₹10.0 L+₹1.0 L (11.3%)Rejected-Finance E 140 2010 BKP VILL AMTALLA PO DUMARCHIR DIST PAKUR PIN 814111 JHARKHAND | PAKUR | PAKUR | JHARKHAND | 814111 | L5 | Rejected-Finance HIGH RATE |
Tender Value
₹9 L
EMD Value
₹18,000
Closing Date
5 Feb 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Shri Tapan Das AE Civil
AGE I AF SINGARSI
REPAIR TO SUNKEN FLOOR TOILET AND BATHROOM IN VARIOUS BLDG AT AF STATION SINGARSI UNDER AGE I AF SINGARSI
2024_MES_637562_1
C/8644/E8
Open Tender
Civil Works
Item Rate
180 days
AGE I AF SINGARSI
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
Yes
AGE I AF SINGARSI
₹18,000
Yes
24 Feb 2024
15 Jan 2024
6 Feb 2024
15 Jan 2024
5 Feb 2024
29 Jan 2024
Amount
Taking down old cement plaster of any description on brick or stone walls or from concrete surface incl raking out joints, hacking for key,scrubbing down with water and removing unserviceable material area,complete all as specified and as directed by Engineer-in-Charge.
M&L for Rendering 15mm thick with CM 1:6 on fair faces of brick surface / stone masonary finished even and smooth without using extra cement, complete all as specified and directed by Engineer-in-Charge.
M&L for preparation of newely plastered wall surfaces and applying two coats of Oil bound distemper over a coat of over one coat of alkali resistant primer over plastered surface to prepare the surface even and smooth, complete all as specified and directed by Engineer-in-Charge.
M&L for preparation of newely plastered wall surfaces and applying two coats of cement base paint, complete all as specified and as directed.
Demolition of cement concrete (unreinforced) in ground floors and pavings n. exc 15 cm thickness (below or above ground level ) and removing unserviceable material and disposed to low lying area etc, complete all as specified and directed by Engr-in-Charge..
M&L for 25 mm thick cement concrete type B-0 , 1:2:4 ( 12.5 mm graded aggregate ) as in sub floors (leveling course), complete all as specified and directed by Engineer-in-Charge.
M&L for cement concrete 40mm thick in 1:2:4 type B-1 (20 mm graded aggregate) as in flooring finished even & smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.
M&L for 50mm thick cement concrete (1:3:6) type C-1 ( using 20mm graded agg.) as in floor finishing/Plinth protection cement concrete, complete all as specified and as directed.
M&L for Preparation of old plastered or unplastered surfaces of walls including cornices, pillasters by brooming down or steel wire smoke, root, moulds, moss and efforescent salts, and trading oil and greasy spot by using suitable chemical & removing nails,filling cracksand making good holes with chalk whiting/putty, and brooming to remove all dirt etc and applying one coat of Oil bound distemper on old prepared surfaces of walls, complete all as specified and directed by Engineer-in-Charge.
Demolition of stone slabs and tiles of any description or thickness in floors, aprons all, complete as specified and directed by Engr-in-Charge
M&L for Non skid ceramic coloured designer seamless tiles 7 to 8mm thick area of each tile exceeding 0.11 sqm but not exc 0.18 sqm,in floors etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface over and including 15mm thick screed bed in CM 1:6, complete all as specified and directed by Engineer-in-Charge.
M&L for Glazed ceramic coloured designer seamless tiles 350x250x7mm/450X350X7 mm thick on vertical surface as in skirting, dado set and jointed with neat cement slurry and pointed in white or coloured cement to match with the surface over and including 10mm thick screed in CM 1:4, complete all as specified and directed by Engineer-in-Charge.
M&L for Vitrified tiles light shade 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, as in floors etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match shade over and including screed bed 20mm thick in CM 1:6,complete all as specified and directed by Engineer-in-Charge.
M&L for Vitrified tiles light shade 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, as on vertical surfaces etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match shade over and including 10mm thick screed in CM 1:3,complete all as specified and directed by Engineer-in-Charge.
M&L for Granite (of any type) work (table rubbed and polishedin steps, jambs, pillars, window-cills, cooking platform sand like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to matchwith shade of granite,complete all as specified and directed by Engineer-in-Charge.
M&L for cutting chases for concealed water tubing in stone wall or concrete block wall or concrete slab or wall etc and making good cutting to facing where required and pointing in cement mortar 1:3 ,cutting exc. 10cm in width but not exc. 20cm girth, complete all as specified and as directed.
S&F in repair PVC (SWR) floor trap, plain with grating including jointing with solvent cement for 75 mm bore of pipes,complete all as specified and as directed.
Taking down shutter of any description exc 1sqm but n. exc 2sqm each and refixing in same position including resecuring or easing and adjusting,complete all as specified and as directed.
S&F in repair MS medium weight 100mm butt hinges, complete all as specified and directed.
Taking down or up steel tubing and connection including cleaning for refixing or removal to store of 20 mm dia, complete all as specified and as directed.
Ditto as per srl item No 20 but 15 mm dia, complete all as specified and as directed.
S&F water tubing, medium grade, galvanized, with all fittings fixed to wall of 20 mm dia, complete all as specified and as directed.
Ditto as per srl item No 22 above, but 15 mm dia complete all as specified and as directed.
S&F in repairs PVC valve less syphonic action type flushing cistern low level white, dual flush, ISI marked (IS: 7231) with PVC inlet ball valve, float and handle, 10 ltrs capacity and connection to pipes including PVC connection and 32mm dia PVC long bend for squat pattern etc , set with concrete and making good to floor including taking down existing, complete all as specified and as directed.
S&F in repairs fancy type chromium plated 15 mm bore stop valve/angle cock cast copper alloy, screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions, complete all as specified and as directed.
S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position, complete all as specified and as directed..
S&F in repairs CP soap dish,complete all as specified and as directed.
S&F in repairs tubular towel rail brass chromium plated , 20mm dia, 60cm long between flanges, complete all as specified and as directed.
S&F in repair Vitreous china squatting pan 'Orissa' pattern ' size 580x440mm white, with integral foot rest 'P' or 'S' trap,front or back inlet including connection to trap and to flushing pipe,anti syphonage pipe, etc. Complete making good to floor as existing, complete all as specified and directed by Engr-in-Charge.
S&F in repairs Vitreous china water closet pan ( pedestal pattern), white including fixing bolts etc including plastic water closet seat, black/white closed pattern with flat bottom and cover and mild steel chromium plated hinging device, complete all as specified and as directed.
S&F in repairs stainless steel sink with drainage board,made of 1.00mm thick sheet for kitchen or laboratory with plug,washers waste pipe including bedding in cement mortar to dwarf wall or including fixing cast iron cantilever brackets,connecting union to pipe, overall size 915mmx460mm, bowl size (410x330x160mm), complete all as specified and directed by Engineer-in-Charge.
S&F in repairs Vitreous China Wash hand basin, white, size 580 mm x 450 mm size, excluding taps, chain & plug & porcelain stopper but incl brackets, 40/32 mm dia PVC waste pipe, PVC connection, chromium plate coupling 32 mm dia, approved pedestal & cutting for and pinning ends of brackets or erecting stand, Complete all as specified and as directed.
S&F in repair Fancy type pillar taps, 15 mm dia, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixedcomplete all as specified and as directed.
S&F in repair 15mm Bib tap cast copper fancy type chromium plated alloy with capstan handle screwed down screwed for iron pipe or for brass ferrule. complete all as specified and directed by Engineer-in-Charge.
S&F in repair Brass Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union alongwith arm 225mm and flange,complete all as specified and as directed.
S&F in repair Grating doom 100mm dia of PTMT (Minimum weight 25gms), complete all as specified and directed by Engineer-in-Charge.
Demolition of brick/stone/boulder masonry, built in cement mortar including all quoins,arches,pillars,etc,but exceeding ashlar facings,dressed stone work and precast concrete, complete all as specified and directed by Engineer-in-Charge.
M&L for half brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar (1:4), complete all as specified and as directed.
M&L for Brick work with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed by Engr-in-charge.
M/S ASHA ENTERPRISE
M/S AMARNATH AGARWALLA
P .BANERJEE AND CO
M/S MBS TRADING CO
M/S KUMAR AVINASH
LALAN SHARMA
M/S Subhadip Enterprise
M/S New Builders Corporation
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .