Comprehensive maintenance of Internal B/R nature of work including aluminum, joinery work, rolling shutter etc in OTM Accn in the area of AGE B/R-III under GE (West) Delhi Cantt-10

Amount

Inspection and rectify the problem of under ground sewage of all nature i.e. blockage of WHB, bottle trap, urinal, sink, floor trap Nahani traps, WC gully trap, vertical CI pipe/PVC pipes of any dia including junction holes of any description ,sewer/rain water line, manholes in any situation of building for cleaning manually using bamboo or other eqpt / mechanically as per requirement at site and removing blockage from entire system and making it fully functional in the area of OTM HQ TGME,Old base hosp,AFTC,629 TPT coy HQ CWE NO. 2, BSO yard WEST & AFMSD. complete all as specified and directed. Note:- (i) Contractor shall arrange suitable mechanical equipments incl necessary form work/scaffolding and safety measure complete all as specified and directed. (ii) In addition to above, Contractor shall arrange mechanical rodding with vibrating/ drilling concept i.e trolley mounted sewer cleaning machine once in every month for cleaning entire sewage system and free of any sludge/ blockage. (iii)The above aspect shall be deemed to be included in the quoted rate of this item.

Inspection and rectify the problems of water leakage from taps, WCs, flushing cistern, urinals, wash basins, bottle traps CI trap from ceiling etc and any obstruction to water supply requiring plumbing work and carry out minor repairs such like replacement of washers, check nuts, tightening of fittings, adjustment of float valves and syphon fittings of flushing cistern, cleaning of bottle traps etcn the area of OTM HQ TGME,Old base hosp,AFTC,629 TPT coy HQ CWE NO. 2, BSO yard WEST & AFMSD. complete all as specified and directed. Note:- In addition of above Contractor shall arrange suitable T&P such as die set (1/2" to 1") washers of all size, safeda, thread (soot), M-seal, screws, nails and the like incl necessary form work and scaffolding and safety measures to make it functional and leak proof complete all as specified and directed. The above aspect shall be deemed to be included in the quoted rate of this item.

Inspection and rectifying of carpentary work (wooden/steel/aluminium) iron/aluminium mongery, palmet box, door springs, rolling shutters, venetion blinds etc requiring carpentry work and carrying out minor repairs such like tighting of screws/nails easening of joinery door spring etc in the area of OTM HQ TGME,Old base hosp,AFTC,629 TPT coy HQ CWE NO. 2, BSO yard WEST & AFMSD. complete all as specified and directed. Note:- In addition above Contractor shall arrange suitable T&P such as (screws/nails, plugs, grease,putty welding rods & portable welding machine drill machine & bid) etc including necessary form work/scaffolding and safety measure to make it functiona lncl all as specified and directed. The above aspect shall be deemed to be included in the quoted rate of this item.

Inspection and rectifying of black smith work to welding work in repairs to steel windows/doors, handles, door springs, iron frame of doors, rolling shutter and other iron misc works ,repair by welding run or spot welding complete as per site requirement in the area of OTM HQ TGME,Old base hosp,AFTC,629 TPT coy HQ CWE NO. 2, BSO yard WEST & AFMSD. complete all as specified and directed. Note:- (i) Contractor will arrange suitable T&P such as RIKSHAW, welding machine, gloves, welding glass,welding rod etc and any other tools required incl necessary scaffolding and safety measures complete all as specified and directed. (ii) The above aspect shall be deemed to be included in the quoted rate of this item.

Hacking out old broken glass any thickness, size quality or description from wooden/steel frame fixed with wooden beads/metal pinning complete all as specified and directed

S&F 4 mm thick plain sheet glass in square not exc. 0.50 sqm in each pane, fixed with pin headed beads or putty (in metal frames etc) complete all as specified and directed.

S&F 5 mm thick plane sheet glass and glazing with oil putty in square exc 0.5 sq. m in each pane complete all as specified and directed.

S&F in repair stainless steel wire cloth with stainless steel 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with wire staples (for windows and gauzed doors) all as specified and directed.

S&F in repairs aluminium anodized extruded bow handle fabricated type 125mm long complete all as specified and directed.

S&F in repairs 100 mm long mild steel butt hinges, medium weight, cold rolled and fixed complete all as specified and directed.

S&F in repairs 200mm long aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F in repair stainless steel curtain rod 25 mm dia with pair of suitable brackets,finnels and also making good the wall surface to match the existing surfaces complete all as specified and directed.

S&F in repair 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.

Dismantling of wall and ceiling boards (fibre, pulp, insulation. etc) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed.

S&F false ceiling of grid of galvanized steel tee/ angle (power coated ) of grid size 600x600mm as directed comprising of main tee ( weight not less than240gm /RM) and angle (weight of section not less than 217gm/RM) all around of walls suspended of ceiling by fasteners of adjustable guide hanger including clips/MS fitments to hold the panels insert of any type, including ceiiling boards of size 595x595x12 mm thick mineral fibre board designer tiles of approved firm fixed in position complete all as specified and directed.

S& F Solid PVC Wall Lining Panelling consisting of 5mm thick wood grin colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed.

S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and directed.

S&F in repair European vitretious china wash down water closet pan (excluding flushing cistern but including flush pipe and pvc sheet cover white).

S&F in repairs 10 Ltrs capacity PVC low level flushing cistern complete with syphone handle lever PVC bend including connecting to WC and fixing on walls with bracket all as specified.

S&F in repairs white Plastic water closet seat cover, closed pattern with flat bottom, and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S&F CP tubular towel rail 600mm long 20 mm dai complete all as specified and directed.

S&F 25 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F in repair grating doom 75mm dia of CP complete all as specified and directed.

S&F in repair grating doom 100mm dia of CP complete all as specified and directed.

S&F in repair Vitreous china squatting pan of orissa patern size (580 x 440mm) white with integral foot rest (excluding flushing cistern and flush pipe) complete all as specified and directed.

S&F in repair Urinal spreader of CP any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete all as specified & directed.

S & F in repair vitreous china Urinal, half stall type, white (excluding flushing cistern , flush pipe and waste pipe) complete all as specified & directed.

S&F in repairs Two way Bib cock, fancy type chromium plated cast copper alloy with capstan head, screwed down, screwed for iron pipe or for brass ferrule and fixed complete in all respect as specified.

S&F in repairs Health Faucet mild steel chromium plated suitable for 15 mm dai pipe with 1.25 mtr long flexible tube and wall hook including making connections and fixed in position complete in all respect as specified.

S & F in repair brass spindle for bib tap, pillar tap, stop cock,angle valve of any description etc complete all as specified & directed.

S&F in repair 15 mm dia bib tap cast copper alloy chromium plated with capstan head handle, screwed down high pressure screwed for iron pipe or for brass ferrule complete all as specified & directed.

S&F in repairs 15mm dia fancy type Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified.

S&F in repairs 15 mm dia stop valve cast copper alloy chromium plated with capstan head handle, screwed down high pressure screwed for iron pipe or for brass ferrule complete all as specified & directed.

S&F in repairs 15mm dia angle valve, chromium plated, screwed down high pressure, with crutch or butterfly handle screwed both ends for iron pipe on for unions, complete all as specified and directed.

S&F in repairs Brass CP mixer for mixing hot & cold water (for wash hand basin) and fixed including dismantling of 15mm dia chromium plated pillar tap, complete all as specified and directed.

S&F in repairs 15 mm dia wall mixer cost copper alloy chromium plated with capstan head handle, screwed down high pressure screwed for iron pipe or for brass ferrule complete all as specified.

S&F in repairs15 mm dia bib tap PTMT with capstan head handle, screwed down high pressure screwed for iron pipe or for brass ferrule complete all as specified & directed.

S&F in repairs 15 mm dia pillar tap PTMT with capstan head handle, screwed down high pressure screwed for iron pipe or for brass ferrule complete all as specified & directed.

S&F in repairs 110 mm bore PVC (SWR) Pipes single socket, complete all as specified and directed.

do- as per item no 40 but 75mm bore

S&F in repairs PVC bend/tee suitable for 110mm bore pipe complete all as directed

do- as per item no 42 but 75mm bore

S&F in repairs door closer hydraulically regulated (extruded section) , designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 complete all as specified and directed.

S&F in repairs heavy duty double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box,main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel complete all as specified and directed.

S&F in repairs 19mm thick prelaminated particle board, inerior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screw to timber frame work complete all as specified and directed.

Cleaning and removing all scales and dirt etc from tanks and from mouths of circulating pipe etc for 500 to 1000 ltrs capacity of tanks, complete all as specified and directed.

All as per Srl Item No 47 here-in-before but exc 1000 ltrs and not exc 2000 ltrs.

Dismantling of floor, hearth or wall tiling including cement mortor bedding (but not backing removing serviceable to store and rubbish off the premises complete all as specified and directed.

M&L for Glazed ceramic colour tiles in vertical surface of size 450x 300x7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick cement plaster in CM 1:4 all as specified and directed.

M&L for Non Skid ceramic tiles 7 to 8 mm thick(square/ rectagular) area of each tile exceeding 0.11 sq m but not exceeding 0.18 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15mm thick screed bed or bedding layer in CM 1:6, all as specified and directed.

M&L for Non Skid ceramic tiles 7 to 8 mm thick(square/ rectagular) area of each tile exceeding 0.18 sq m but not exceeding 0.38 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15mm thick screed bed or bedding layer in CM 1:6, all as specified and directed.

All as per item no 52 above here-in-before but in skirting/ dado all as specified and directed.

M&L in repair rotational moulded polythylene water storage tanks 500 litres capacity (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified including 20 mm brass valve high pressure with polythene float and fly nut complete and GI tank nipple, screwd for iron pipe complete all as specified and directed.

All as per iten no 54 above but 1000 ltr capacity.

All as per iten no 54 above but 2000 ltr capacity.

Taking down wooden/steel chowkhats/door frame including shutter (without taking off shutter) not exc.1.5 Sqm each and removing to or from store complete all as spd & directed.

S&F powder coated ( min thickness 50 micron )Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified

Anodised aluminium door shutters,aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified

M&L for easying aluminum door shutter of any description incl taking down shutter and refixing in the same opening after rectifying all defects in the shutter, oiling / servicing of floor spring, hydraulic door closer, tightening all loose screws, cleats, etc replacing all rubber gaskets/aluminium beading complete all as specified and directed. Note: The minor parts such as screws, cleats, oil, rubber neoprene gasket, aluminium beading etc shall deemed to be including in quoted rate.

Uprooting and removing of wild growth trees from wall/roof/chajjas/CI pipes etc any location on buildings including removal of roots, sub roots upto 15cm girth etc, making good with PCC 1:2:4 or concrete in CM 1:3 as directed and finishes the surface matching with adjoining areas of wall/roof etc upto full height of bldgs (i.e. upto 2nd storey bldg), complete all as specified and directed. NOTE:- glyphosate or imazapyr chemical has to be poured into the roots or the hole made for removing tree for prevention of growth of tree or roots into the wall/roof/chajjas/CI pipes.

Uprooting and removing of wild growth/ grass from roof or any location on buildings includings etc making good with PCC 1:2:4 concrete or in CM 1:3 as directed and finishes the surfaces matching with adjoining areas of wall/roof of bldgs (i.e. upto 2nd storey bldg), complete all as specified and directed. NOTE:- triclopyr amine or triclopyr ester chemical has to be sprayed on the surface for removing grass or for prevention of growth of plants shrubs roof/chajjas.

M&L brick work with brick size of 230mm x 110mm x 75mm sub class B brick staight or curved on plan to any radious built in cement mortar (1:6) using sub class 'B' bricks straight or curved on plan exc 6 mtr mean radious including demolition of brick work complete all as specified and directed by the Engr-in-Charge.

M&L Brick work with brick size of 230mm x 110mm x 75mm sub class B brickstaight or curved on plan to any radious in half brick thick wall built in CM 1:4 etc including demolition of brick work complete all as specified and directed by the Engr-in-Charge.

Taking down cement plaster of any description on brick wall or concrete surfaces including raking out joints in brick work, hacking for key, scrubbing down with water etc complete all as specified.

M&L for 15mm thick rendering of ready mix mortar of approved make on brick work or concrete surfaces on walls, finish the surface even and smooth without using extra cement as whole or in patch etc complete all as specified and directed.

M&L for 10mm thick rendering of ready mix mortar of approved make on fair face on ceiling and finished even and smooth without using extra cement complete all as specified and directed.

M & L for pointing in patches n.exc 1.50 Sqm each with cement mortar 1:3 on roof tiles etc and matching with surround surfaces etc all as specified and directed.

M&L for preparation of new surface of wall and apply two coat of Oil Bound Distemper over and including a coat of primer over wall care putty min 2mm thick to obtain an even & smooth surface complete all as specified and directed.

M&L for two coats cement base paint including preparation of new plastered surfaces of wall over and including one coat of alkali resistant primer complete all as specified and directed.

M&L for three coats of White wash including preparation of new plastered undecorated surfaces on ceiling complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and paving not exc. 15cm thickness (below or above ground level), complete all as specified and directed.

75 mm thick, PCC (1:4:8), type D-2 (using 40 mm graded stone aggregate), as in sub base under floor complete all as specified and directed.

50mm thick fine sand layer spread uniformly over sub base complete all as specified and directed.

M&L for reflective type glossy finish Machine pressed precast concrete interlocking tiles/paver block any colour, shape and size (as approved by GE) conforming to IS 15658 of 60mm thickness M-35 grade with grey cement and no pigment including filling the joints upto full depth with fine sand, complete all as specified and directed by Engr-in-Charge.

Taking down wooden/steel chowkhats/door frame including shutter (without taking off shutter) not exc.1.5 Sqm each and removing to or from store complete all as spd & directed.

S&F for mild steel framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors, angle iron chowkhats; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 including fixing of hold fast with bed block of size 200x200x15mm in CM 1:2:4 (using 20mm graded agg complete all as specified and directed. .

S&F powder coated anodised aluminium frame for windows, ventilators, grill with one or more rebates including necessary joining cleat, powder coated aluminium snap beading, screws for fixing etc. complete all as specified & directed. Note: (1) Only aluminium items to be measured. (2) Glass, wiremesh, handles to be measured & paid separately. (3) Minimum thickness of powder coating to be 50 micron.

S&F aluminium powder coated sliding window comprising of sliding runner of three way aluminium frame section (weight not less than 0.80 Kg/RM) as per series-A, consisting of three sliding shutters made out of section (weight not less than 0.55 Kg/RM) with 5.5mm thick glass and wiremesh (two No sliding glass shutters and 1 No wire mesh shutter) fixed with rubber and aluminium beading including down push type locking arrangement in shutter, fixed the frame with rawl plug complete all as specified and directed.(Note:- min thickness of powder coating not less than 50 micron.)

Taking down wooden/steel chowkhats/door frame including shutter (without taking off shutter) exc.4 Sqm each complete all as spd & directed.

S&F 1.25 mm thick lath Steel rolling shutters, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer and two coat of synthetic enamel paint ;erected in position as indicated, complete:but gear operated type with bevel gear box and crank handle complete all as specified and directed.

S&F in repairs Safety lever locks mild steel with 4 levers for rolling shutters complete all as specified.

S&F in repairs Ball bearing including suitable springs for rolling shutters complete all as specified and directed.

S&F in repair 15mm bore GI tubing, medium grade, with all fittings and fixed including taking down old tubing and connections, complete to walls, ceiling or laid in floor complete all as specified and directed.

All as per item No. 84 above but 20mm bore tubing.

S&F in repairs PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed.

S&F in repairs 32 mm PVC waste pipe 900 mm long with complete all as specified and directed.

S&F sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm complete all as specified and directed.

S&F sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes;including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm all as specified and directed.

S&F sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes;including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm all as specified and directed.

SHRI JI ENTERPRISES

M/S Parmod Johar

M/S Ayub Khan

JAIPAL AND BROTHERS

GAUTAM ELECTRIC WORKS

B. S BUILDERS

ramveer Singh

M/s M M BAHL

Hanuman Promoters