Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹3.6 Cr
EMD Value
₹7.2 L
Closing Date
21 Aug 2024, 5:30 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Aircraft Overhaul Division, Nasik
Aircraft Overhaul Division, Nasik
Modification / repair works *Civil* in LCA hangars in HAL-Nashik factory areas
8869
NK/FW/C-1581/2024-25
Works
Mig Complex - Aircraft Overhaul Divn - Nasik - Works - Contracts
₹0
₹7.2 L
21 Aug 2024
23 Jul 2024
23 Jul 2024
21 Aug 2024
Name of the Individual / Firm / Company: * Mandatory
Type of ownership
Details of Constitution or Legal Status such as certificate of incorporation, shops and establishments, etc.,
Address for correspondence:
PAN No.:
Contact details
I.T Returns for past 03 years (Assesment Year)
Related Document to be Uploaded to eProcurement Portal.
Average annual financial turn over during the last 3 years (Financial Year), ending 31st March 2023 of the previous financial year /Accounting year [ should not be less than 30% of Amount put to tender]
TURN OVER (Rs. In Lakhs)
Related Document to be Uploaded to eProcurement Portal. Profit & loss statement duly certified by CA with UDIN
ESIC , PF & GSTIN Nos with proof
Related Document to be Uploaded to eProcurement Portal.
Bank(s) details: [Copy of the cheque leaf to be uploaded]
ECS Bank details as per Annexure in tender documents , signed and sealed by concerned bank to be Uploaded to eProcurement Portal. And hard copy of original ECS and cancelled cheque to be submitted to address mentioned in e-tender notice for refund of EMD or payment etc(New bidder).
Latest Bankers Solvency Certificate from Nationalized or Scheduled Bank issued within a period of 12 months from the final date of Submission of Tender. (Should not be less than 40% of the Approx. estimated amount put to tender.)
Related Document to be Uploaded to eProcurement Portal.
Experience of having successfully completed similar works "(As per "Work Details" table of Etender notice) ." during last 7 years ending on previous day of last day of submission of tender should be either of the following. [Latest work experience (completion) certificate may be uploaded] (i) THREE similar completed works each costing not less than the amount equal to 40% of the estimated cost of Amount put to the tender OR (ii) TWO similar completed works each costing not less than the amount equal to 50% of the estimated cost of Amount put to the tender OR (iii) ONE similar completed work each costing not less than the amount equal to 80% of the estimated cost of Amount put to the tender
Type of Work: [ Incase of private works the same shall be supported with TDS certificate]
Type of Work: [ Incase of private works the same shall be supported with TDS certificate]
Type of Work: [ Incase of private works the same shall be supported with TDS certificate]
Value of the existing commitments and on-going works (Works in hand/in progress) to be completed in the next 10 months. (Work on Hand)
Related documents to be uploaded in eprocurement portal. Work on Hand. This statement should be submitted duly verified and certified by Chartered Accountant
Value of the work executed in last five years(Financial year wise)
Assessed Available Bid Capacit =2xAxN-B
License for execution of Electrical works and other specialized works from the concerned authorities /organizations/bodies (applicable for Electrical works combined with Civil works)
Bank Balance statement for last three months.
Details of latest overdraft facilities available with bank.
Details of plant & Machinery for the work.
Proposed work completion schedule in the form of bar- chart.
Details of person holding the power of Attorney.
Related Document to be Uploaded in eProcurement Portal.
Acceptance by party for Scope of work as per BOQ and Tender terms & conditions
DECLARATION
The document being viewed / downloaded from the website and having read & understood all the contents of the tender document mentioned under terms and conditions ( Page 1 to146) including price bid do hereby accept all the terms and conditions laid down
I/We declare and confirm that - 1. All information and attachments submitted along with this offer are true and correct. 2. I/We are aware that any false information provided herein will result in the rejection of my offer . 3. I/We shall not make refund claims of expenditure incurred in processing this offer. 4. I / We aware that document sought only be uploaded for evaluation of offer.
Specification
Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead all complete and as directed by Engineer-in-charge.
Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50metres lead all complete and as directed by Engineer-in-charge.
Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead : Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix) all complete and as directed by Engineer-in-charge.
Dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including stacking within 50 metres lead : Thickness above 10 mm up to 25 mm all complete and as directed by Engineer-in-charge.
Providing & Laying PCC 1:2:4 at any size of Position above or below ground (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) all complete and as directed by Engineer-in-charge.
Providing,fabricating, hoisting & errecting in position Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete and as directed by Engineer-in-charge.
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P.brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately)all complete and as directed by Engineer-in-charge.
Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer in-charge.
Refixing of prelaminated partical board of above respective dismental item in aluminium partition frame, including whenever necessary cutting in size , making good for fixing etc. all complete and as directed by Engineer-in-charge.
Providing and fixing in position Bearing wheel of approved make for sliding window shutter all complete and as directed by Engineer-in-charge.
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item) all complete and as directed by Engineer-in-charge.
Providing and fixing aluminium 200x10 mm aldrop, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. all complete and as directed by Engineer-in-charge.
Providing and fixing aluminium handles ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. all complete and as directed by Engineer-in-charge.
Providing and fixing IS : 12817 marked stainless steel butt hinges (heavy weight) with stainless steel screws etc. all complete and as directed by Engineer-in-charge.
Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564,embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. all complete and as directed by Engineer-in-charge.
Providing and fixing bright finished brass 100 mm mortice latch and lock, ISI marked, with six levers and a pair of anodised (anodic coating not less than grade AC 10 as per IS : 1868) aluminium lever handles of approved quality with necessary screws etc. all complete and as directed by Engineer-in-charge.
Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc.all complete and as directed by Engineer-in-charge.
Supplying and fixing mechanical operated gear operated type with gear box and crank handle rolling shutter of approved make made of 80 x 1.2 mm MS laths interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking use complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and 1.2mm thick MS top cover for rolling shutters all complete and as directed by Engineer-in-charge.
a) Providing and applying two coats of synthetic enamel paint on steel surface of any description of approved quality and shade over one coat of red oxide of approved brand and shade on newly treated surface including preparation of surface to be done before applying primer and cleaning etc all complete and as directed by Engineer-in-charge.
Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. all complete and as directed by Engineer-in-charge.
Rupees Three Crore Five Lakh Forty Eight Thousand Three Hundred Forty Three and Seventy Five Paise Only
Approximate Basic Amount Put to Tender
Rupees Fifty Four Lakh Ninety Eight Thousand Seven Hundred One and Eighty Seven Paise Only
Rupees Three Crore Sixty Lakh Forty Seven Thousand Forty Five and Sixty Three Paise Only
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
raw.json
RAW_JSON
Etender_notice...pdf
TENDER_DOCUMENT • 0.47 MB
Prequalification_p.xlsm
TENDER_DOCUMENT • 0.02 MB
PriceBid.xlsm
TENDER_DOCUMENT • 0.08 MB
Tender_Document.pdf
TENDER_DOCUMENT • 1.63 MB
ECSDetailsForm.PDF
TENDER_DOCUMENT • 0.16 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .