PROVN OF WALL AND HARD STANDING AROUND BLDG NO 120 AT RMS AND PROVN OF HARD STANDING BEHIND MES PUMP HOUSE AT RMS AND PROVN OF INTERLOCKING TILES INFRONT OF BLDG NO P 34 AT RMS UNDER GE (SOUTH) BANGALORE

Amount

Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and as directed.

M&L for cement concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed.

M&L for pre-cast cement concrete block masonry of Type C1 1:3 :6 (20mm graded aggregate) with solid blocks,exc.10 cm in width and setting in cement mortar1:6 complete all as specified and as directed.

M&L for rendering 15mm thick on fair faces of brickwork or concrete surfaces in cement mortar 1:6 and finished even and smooth without using extra cement complete all as specified and as directed.

M&L for precast cement concrete 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) in louvres and jallies, 25 mm thick (measured solid), incl all mouldings but excluding frame (pre cast frame shall be measured separately and paid) setting with cement mortar 1:4 complete all as specified and as directed.

M&L for providing cement concrete 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) as in coping, framework, bed plates, corbels, with plain faces, incld chamfering, weathering, throating etc set in CM 1:4 complete all as specified and as directed.

S&F mild steel TMT bars 6 to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Returning, filling in, including spreading levelling, watering and well ramming in layers n.exc 25cm complete all as specified and as directed.

M&L for removing excavated material n. exc 50m and depositing where directed at a level n. exc 1.5 m above the starting point complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of wall and applying two coats of cement base paint over a coat of primer complete all as specified and as directed.

Removing excavated material exc 250 m but n.exc 500m and depositing where directed complete all as specified and as directed.

M&L for 15 mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar 1:4 complete all as specified and as directed.

M&L for 10 to 12 mm thick designer tiles, uniform colour finished factory made wall cladding tiles, of each not exceeding 0.25 sqm area fixed with and set and jointed & pointed in neat cement slurry and finshed with white cement and pigment complete all as specified and as directed. Note : The size , colour & combination of tiles as approved by GE.

S&F cast iron intricate and ornamental grill work exc 5 kg, grade FG 150, in railing, frames, grills with , balusters and similar work complete all as specified, designed and as directed.

M&L for preparation of new or previously untreated steel and steel based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for pre cast RCC (1:2:4) type B1 for cover slab for man holes and set in cement mortar (1:6) complete all as specified and as directed.

S&F mildsteel TMT bars 10 mm cut to length bend to shape require including cranking hooping ends binding in & wine annealed not less than 0.9 mm dia or securing with clips all as specified and as directed.

M&L for surface excavation n.exc (not exceeding) 30cm deep and averaging 15 cm deep and getting out soft/loose soil complete all as specified and as directed.

M&L for 75 mm thick cement concrete 1:4:8 (using 40 mm graded stone aggregate) as in sub base flooring well rammed and levelled all as specified and directed.

S&F rubber moulded coloured precast cement concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 grade with grey cement and pigment laid over and including 50 mm thick consolidated sand cushioning complete all as specified and as directed. Note : The gap between kerb stone & paver block to be filled by cement mortar and finish to match the shade of interlocking paver block as directed.

M&L for excavation over areas n.exc 1.5 m deep and getting out in soft /loose soil, complete all as specified and directed.

M&L for hard core with broken stone or boulders of gauge n.exc 63mm deposited spread and levelled in layers n.exc 15cm thick watered and well rammed complete all as specified and directed.

M&L for precast cement concrete Type B1,1:2:4 (20 mm graded aggregate) for kerb stones set in cement mortar 1:4 complete all as specified and directed.

M&L for cement concrete 1:5:10 type E-2 (using 40 mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed.

M/s SL CONSTRUCTION

Srisrinivasaenterprises

MAJ CONSTRUCTIONS

J PUSHPALATHA ENGINEER AND CONTRACTOR

M.VENKATARAMANAPPA AND COMPANY